No matter how refined and thoughtful the interior is, without small memorabilia: family photographs, souvenirs, flowers and other accessories, it is almost impossible to create comfort. Therefore, shelves have become the most popular piece of furniture in our time. There is a huge range of materials for their manufacture on the market. However, plywood shelves still occupy the popularity rating top positions. And it’s not surprising, because you can make any exclusive thing from plywood with your own hands - if only you have the desire.
Wall "balconies"
Even if you have never made furniture, then make hanging shelves It won't be too difficult for you. There are many accessories that can help you with this: pelican-type shelf supports, decorative brackets or hidden anchor bolts. Choose according to your taste.
Attach the mount of your choice to the wall using a level. If it is a “pelican”, you just need to cut out a shelf of the required size (rectangular or embossed), treat it with varnish, paint or self-adhesive and insert it into the clamp. The shelf is ready. Despite the fact that this type of holder is intended primarily for glass shelves, you can also use it to fasten thin plywood (6-15 mm). It is worth considering that the carrying capacity of such a shelf will be very limited.
Brackets and hidden anchors are more suitable for attaching plywood. The latter are remarkable because they are invisible. They are also very easy to attach. Holes are drilled in the wall and fasteners are inserted. Then holes are also drilled in the shelf, the diameter and length of which correspond to the dimensions of the anchor. The shelf is mounted on a bolt. The plywood should be much thicker than the anchor bolts. If you take, for example, a pin with a diameter of 10 mm, then the plywood must be at least 30 mm thick.
There is another way secret fastening wall shelves. But first, the shelf needs to be assembled.
To do this you will need the following tools:
- screwdriver;
- jigsaw with wood files;
- miter box;
- furniture stapler;
- perforator;
- level;
- roulette;
- pencil;
- brushes;
- non-metallic spatula.
Tools required for work: screwdriver, jigsaw, hammer drill, tape measure, level, pencil.
To begin with, you will need 2 long and 2 short beams with a thickness of 40x40. A U-shaped frame is constructed from 2 short and one long beams, fastened with self-tapping screws. The frame is lubricated with glue and 2 sheets of plywood 4-6 mm thick are attached to it on both sides. The sheets are nailed with a furniture stapler, self-tapping screws or small glazing nails. The ugly ends are covered with a platband cut on a miter box at an angle of 45°. It can also be attached with staples or hidden nails.
The shelf is puttied, after drying it is sanded with fine sandpaper, primed and painted.
The fourth, not yet used beam is attached level to the wall. A shelf is put on it. The top plywood is fixed with self-tapping screws.
Return to contents
Modular bookcase
This kind of shelf will become worthy decoration your apartment. If you have imagination, you can assemble the most beautiful modules from modules. various designs. It might be small wall shelf from several sections or a large column from floor to ceiling. If desired, you can construct a partition from it to zone the room.
To assemble such a shelf you will need:
- jigsaw;
- drill with wood drills;
- perforator;
- hammer.
- rectangular plywood elements;
- pins;
- glue.
The rectangles must all be the same. For example, 20 x 30 cm. If you are planning a shelf for the ceiling, calculate the dimensions of the parts in advance based on the height of your room. Divide the height to the ceiling by the number of modules. Get the dimensions of the parts. Do not forget to take into account the thickness of the plywood when calculating.
All parts must be sanded and assembly can begin. Place the first piece on the floor along the wall. Attach 2 parts to it vertically. The left part is located perpendicular to the wall, forming the side of the shelf. The right part is parallel to the wall.
The next module is formed in a similar way, but now the left part is parallel and the right part is perpendicular to the wall. The module is installed on top of the previous one.
The parts are fastened with wooden pins, for which holes of the required diameter are pre-drilled. The pin should fit into the hole with great difficulty.
Holes in horizontal parts are made on the plane, and in vertical parts they are drilled at the ends. Thus, the vertical elements are “sandwiched” between the horizontal ones. The holes should not be through. Confirmats can be used as fastening elements, closing the holes in visible places with special plugs. By continuing to stack the modules on top of each other, you can get an original cabinet of shelves.
If you assemble several of these shelves, each of which is one module lower than the previous one, you will get a nice partition. These shelves must be pulled together. Structures of several sections can be attached to the wall with hidden anchors. Large shelves are attached to the floor and ceiling.
All photos from the article
In any residential country house or another building cannot do without shelves, because this type of product is distinguished by its simplicity and functionality, which is why the popularity similar designs never decreases. The biggest advantage is the fact that you can make them yourself; for this you will need to make drawings of a plywood shelf with your own hands or find them in finished form, after which you can calculate the required amount of materials and purchase everything.
What you need for work
As we noted above, first of all you need to make at least a rough sketch of the future product, this will help you calculate the required volume of materials and determine their exact list. Below we will talk about the main components:
| Plywood | This is the main raw material that will be used. As for the material requirements, they are as follows:
|
| Bar | If you are making shelving with plywood shelves or structures that require a stiffening frame, you will need timber. It is better to choose a planed version with a section of 50x50 mm; it will provide high load-bearing capacity of the shelves and will allow you to place even heavy objects on them |
| Fasteners | It is best to use self-tapping screws, as they provide high strength connections. Their length depends on the thickness of the elements used and is selected individually in each specific case. You may also need corners, with their help you can very quickly and reliably fix individual elements |
| Tool | A jigsaw is best suited for cutting plywood, but if the elements are rectangular in shape, then you can get by. Also, do not forget about such devices as a square and a tape measure, they will be used to mark the material |
Important!
Experts advise using plywood, which consists of at least five layers of veneer, as this ensures high reliability of the structure; three-layer options resist loads much worse.
Review of some design options
Now let's figure out how to make a shelf out of plywood with your own hands. For example, we will talk about two options - simple systems, as well as about shelving structures.
The simplest products
They are made without the use of a frame and are most often intended for storing not very heavy objects.
We will talk about some of the options that you can implement on your own:
- You can use a rope, in this case, several shelves of the required width and length are cut out, after which it is necessary to assemble racks from wooden scraps of different sizes so that the height of the structure is as desired. After this, holes are drilled in the elements, the size of which should be slightly larger than the diameter of the rope. After this, the structure is folded, knots are tied at the bottom, and the upper part is hung on hooks - the product is ready;
- Making a DIY shoe rack from plywood is also quite simple., and for this you need to make a rough sketch. First of all, the upper and lower parts are cut out, between which shelves are placed, which can have very different configurations. All elements are connected using metal corners and self-tapping screws, it is recommended to put a wall on the back side; it will not only close the space, but also provide additional rigidity to the product.
Four legs are placed at the bottom;
- You can make original shelves for flowers from plywood with your own hands as follows:: First, boxes of different sizes are rolled out of sheets; their dimensions should be sufficient to accommodate flower pots. After this, the elements are painted or stacked on top of each other in a chaotic manner and fastened with corners and screws. The result is a very unusual design that can be placed on a stand or hung on the wall.
Shelving
The instructions for constructing such systems are also not complicated:
- First, based on the project or sketch, timber is cut to construct the frame. Then they put vertical racks, between which crossbars of the required length are attached. The easiest way to do this type of work is to use special corners; it is very simple and does not take much time. It is important that the elements fit exactly to each other, and that the frame is without distortions, since it must stand securely on the surface;
- Next you need to cut out the elements from plywood, they must fit the manufactured frame very accurately, this will give the finished product a very neat and attractive appearance. Fastening is done using self-tapping screws; their length must be at least twice the thickness of the sheets;
Important!
To prevent cracking of elements, it is best to pre-drill holes for self-tapping screws; their diameter should be half the size of the fasteners.
- The finished structure can be painted in any color or coated with a protective compound.
Conclusion
DIY plywood shelf - perfect solution, which allows you to make a design that fits the free space in your room. The video in this article will help you understand some of the features of the process even better, and if you still have questions, ask them in the comments.
For many, wall shelves are a favorite home decor. Original shapes, books with colorful covers, beautiful dishes, souvenirs - almost everything that your imagination tells you can become a stylish accent in the interior design of a room. In addition, it is not at all necessary to buy them, because making a creative wall shelf with your own hands is not very difficult even for those who are not very good at carpentry.
DIY shelf in the shape of a honeycomb
Cool addition to non-standard interior could be a nice shelf made in the shape of a honeycomb. The fashionable design is formed from hex modules, creating original geometric compositions. Everyone can arrange the blocks in the optimal way for themselves.
how to make a shelf with your own hands. Photo
Despite their non-standard appearance, hexagonal blocks are quite convenient and functional, and they are also the strongest and most stable.
To make such a shelf with your own hands, you will need a standard set of tools and simple blanks from rectangular boards. You can assemble a structure from ready-made honeycombs in different ways:
DIY wall shelf. Photo
The second option is undoubtedly more practical, since dust will not accumulate between the individual elements.
Let's see how to make a shelf in the form of a honeycomb in practice
To get the correct hexagon, boards for future design pruned at an angle of 30°.
Check again if they are the same size and start assembling hexagons. It's better to do it on the floor.
The elements of the block fit perfectly one to another and begin glue boards using wood glue.
Mounting points for reliability strengthen using L-shaped holders or screws. You can hide the brackets by painting them the same color as the shelf.
The rest of the honeycombs are made in the same way.
Finished modules carefully polished, then covered with stain and special varnish or painted. The shelf will look unusual if the honeycombs are painted in different colors.
All that remains is to fold ready-made blocks side by side and drill one or two holes at the joints and screw them together.
DIY shelf. Video instruction
DIY round shelf
The round shape of the shelf is unusual and stylish solution for those who don’t particularly care about how to place more things on it and thus save space. It’s easy to make such a shelf with your own hands. Success will be predetermined if you choose the right raw material for the shelf and correctly calculate the dimensions of the parts.
Most available material, which is both strong enough and easy to bend - this is fiberboard sheet. Two strips of estimated length (l) are cut out of it. At the same time, a board of the desired length is also prepared as a central shelf. Obviously, all these parts must have the same width. Now about the length of the strips.
DIY book shelf. Photo
From the point of view of geometry, the central shelf is the diameter (d) of the outer contour of the future circle, and the stripes are, accordingly, half the length of the contour, therefore they depend on each other and are related to each other by the formula - l=3.14 x d/2.
Let's say the dimensions of the board are 150 by 700 mm, then the length of the semicircle will be equal to 3.14x700/2, that is, 1100 mm. Now let’s calculate the length of the fiberboard strips, taking into account their overlap, say, 70 mm: 1100 + 2x70 = 1240 mm.
Now let's look at how to make a shelf with your own hands using a sheet of fiberboard.
Stepping back from the end sides by the amount of overlap, apply to the strips marking. Then they begin to form a circle.
The edges of the strips are aligned with each other according to the markings and fixed using clamps. Careful so that the material does not burst, the strips are slowly bent, overlapping the free edges over each other.
Before you finally fix all the parts with screws, you need to make sure that they are correctly adjusted:
The DIY shelf is almost ready. All that remains is to finish it: cover by paint, varnish or other decorative composition. They hang it through furniture eyelets on screws screwed into the wall.
DIY hanging shelves
When choosing an interior for a small apartment, many people wonder whether it is possible to make a compact bookshelf with your own hands so that it does not take up much space. One of possible options- suspended structure.
First you need
The work is carried out in two stages: shelves and fastenings.
Prepare shelves, sawn to size.
Along their edges it is necessary to provide holes of the same size.
DIY hanging shelves. Photo instructions
The template is pressed to the board from the edge, say, using clamps, and make two holes, but not all the way - approximately to the middle of the thickness of the shelf.
The shelves are being processed sandpaper and finish. For example, you can paint it in a color that suits your design.
The shelves are completely ready, all that remains is to hang them. Reliability in this case, given the impressive weight of books, is no less important than aesthetics, so it is best suited for hanging a structure cable.
It is cut into pieces to size and a loop is made at one end using clamping clips.
They are suspended and fixed along the entire length with the required pitch. kegs.
Hooks with screws are attached strictly perpendicular to the wall, on which the cables are hung, and hanging shelves are already attached to them.
DIY hanging shelf-shelf
A charming hanging shelf for the kitchen with your own hands will allow you to rationally use the space. It will look great in a colonial living room, in a children's room in nautical style or a Mediterranean bath. Anyone can handle this kind of work, since you can make a shelf with your own hands in just a few simple steps.
how to make a shelf with your own hands. Master Class
Blanks made of wood are aligned both in shape and size.
Mark the places under holes and make them with a drill with feather drill. To avoid problems in the future, the diameter of the drill is chosen larger than the diameter of the rope by which the bookcase will be suspended.
It is easier to markup using template in the form of a 4x4 square cut out of paper. The template needs to be placed on the corner of the board and marked at the point of intersection of the diagonals of the square.
Color planks.
There are many options on how to make a shelf more interesting. You just need to show a little imagination, for example, paint it only from the ends.
Now the design can be gather. The rope is folded in half and, retreating approximately 30 cm, a knot is tied on each half. The ends are pulled through the holes on one side of the board and secured with another knot. The board thus becomes motionlessly fixed between two nodes. The process is repeated with each shelf, positioned in the required increments.
Do the same with the other side. The main thing that nodes on both sides are located at the same distance from each other.
The remaining free ends of the ropes are cut and unraveled to form tassels.
All that remains is to hang the finished bookcase on the wall.
This DIY shelf has several advantages:
DIY hanging shelves for photos
Is it possible and, most importantly, how to make a shelf on the wall so that it takes up very little space, and you can store a sufficient number of photos, albums, record collections and more there? Well, let's figure out how to make a shelf with your own hands so that it has a minimum depth
This shelf is actually several slats tied together with a rope. They have a bar attached to them that prevents photos, books, etc. from sliding off the shelf. In principle, there can be as many slats as you need, so first you need to decide on their location and quantity. This will make it much easier to calculate the width of the shelves and cut blanks.
After the preparations are sanded, the planks are attached to the slats: they can be nailed or glued. The nail heads are carefully hidden under a layer of special putty, and the plank is sanded again.
Stepping back 2 cm from the edges, drill two holes in the shelf with a diameter slightly larger than that of the rope.
From each end of the first shelf they stretch rope, tightening the ends in a knot.
It will be much easier to do this if you wrap the threaded edge of the rope with tape or, say, electrical tape.
Put on the second shelf.
The process is repeated until all are installed.
The free ends of the ropes are tied to screws with hooks, screwed in at the required height. This is perhaps the most crucial moment, since the bottom shelf should be positioned strictly horizontally, and all the others will be aligned along it.
Horizontalness is checked by level, but it’s still a good idea
there will be someone’s help, because even if you know exactly how to make a shelf, you can do it alone final stage it will be a little difficult.
Book shelf in the form of a Christmas tree
A creative DIY bookshelf will help you linger in the incomparable New Year’s mood longer. Instead of garlands and toys, it is decorated with books and various cute little things. Children especially like these Christmas tree shelves.
This shelf can be made from ordinary sheet of plywood.
First you need to prepare a small layout plan all parts on a sheet of paper on a scale corresponding to the size of the plywood, indicating their dimensions.
Then you need to transfer everything to the plywood in its original size and after carefully checking the location and dimensions of the parts cut them with a saw or jigsaw.
The tree is assembled using wood glue and secured with nails.
When the workpiece dries, it is coated paint and give it time to dry completely.
The Christmas tree shelf is ready for use. On New Year's Eve you can decorate it to your liking and even put gifts on the branches and shelves.
Here's how a DIY shelf can help bring joy to your loved ones.
DIY shelf-rack
Functional and minimalist industrial style is very popular today. A DIY shelf assembled on pipes will bring into your home that very industrial chic that you may be striving for
Since the number of shelves, as well as the total length of pipes, is easily adjustable, we will focus on general scheme making this designer furniture.
Work begins with preparing shelves from wood. Special oil or wax is applied to them to obtain a smooth textured surface.
It would be nice if the shelves initially had an interesting texture.
If you cover the shelves also polyurethane varnish on water based they will acquire an even more magnificent shine.
After allowing the structure to dry, round ones are installed in each corner of the bottom shelf. flanges approximately 2 cm from the edge.
The location of the connecting parts is marked with a pencil.
The shelves are stacked and clamped using clamps.
A pilot hole is drilled through the center of the flange through the first and second flanges. For the next boards in order, the drill size needs to be changed to a larger one, since pipes will pass through them in the future.
Start assembly.
Each flange is placed on the lower shelf above the guide hole and secured to the surface.
Insert into the holes galvanized pipes the required length with threads at both ends and tighten into the flange wrench. A coupling is installed at the top.
When all the parts are mounted, flanges are screwed to the tops of the pipes and fixed to the top shelf.
The finished shelf can be made mobile if you install wheels on the bottom board.
The set will be more stable if you attach it to the wall using special studs or install an L-shaped bracket.
DIY kitchen shelf
Men will probably never understand why housewives never have enough shelves in the kitchen, but few will deny themselves the pleasure of surprising her with a simple but functional kitchen shelf with their own hands.
Making it is not difficult at all. You need to prepare two boards, preferably from hard rocks of the same length. One of them will be installed horizontally for various utensils, and the other - vertically. It will have wooden pegs, on which you can hang cups, potholders and more. The width of the boards may vary slightly.
On a board for cups mark places for perches. It is better to apply the markings symmetrically, then the outermost ones will be at an equal distance from the edges of the board.
Following the markings, drill holes, corresponding to the diameter of the pole.
Using a jig, this special device For drilling, you can make several holes to connect both planks. In extreme cases, you can use a countersink, then the recesses under the screw heads will need to be hidden with plugs.
Wooden pole polished sandpaper and cut into equal parts.
The holes for the perches are greased from the inside with wood glue and inserted pegs. They must perform equally. Surplus adhesive mass wipe with a napkin.
If the pegs are very tight, you can use with a hammer.
Glued to their end part circles either plywood or wood. Do the same with excess glue.
The shelf is generally ready, it remains polish fine sandpaper and take care of the appearance: treat stain and varnish or paint.
IN vertical board shelves drill two holes through which the shelf will be fixed to the wall with screws. The places for the screw heads are countersunk, and they themselves are covered with decorative plugs.
When installing shelves, use a level.
DIY plexiglass shelf
This shelf looks very light, without loading the interior with anything. Do-it-yourself transparent shelf is made from strips plexiglass of a given size, which is installed on original bead supports.
It is more convenient to cut it from a sheet if you buy it directly in the store.
The screws are selected on the basis that the diameter of its head should exceed the hole of the bead. If you have problems with this, you can use a washer.
Before installation, beads need to be paint gold spray paint.
Paint the wooden beads with gold spray paint.
In the wall drill pilot holes.
Six beads are put on a screw, screwed into the wall and leveled. The same is repeated with the second one. For a concrete wall, dowels are used; for a frame wall, the screws must fit into the wooden studs.
The plexiglass plate is placed on the resulting supports.
The shelf's thickness of 1.2 cm provides sufficient rigidity, but not so much that heavy objects can be placed on it.
DIY hanging shelf with straps
Making such a design is extremely simple.
Need to prepare board convenient size and sand the surfaces of all edges with sandpaper.
If the wood texture is not expressive enough and you would like to hide it, you can paint.
From two identical belts Buckles are removed from leather (textile), as well as all other metal parts.
The ends of each of them are drilled holes small diameter.
The belts are folded in half so as to form a loop. They are fixed on the wall, positioned from each other at a distance not much less than the length of the board.
The board is inserted into the hinges and aligned so that it is parallel to the floor.
If you want to secure the board more securely, you can additionally secure the belt with several screws on the bottom side.
Shelf made from construction pallets
Times change, tastes change. Today, many are trying to use industrial decor in their homes, replacing elegant pieces of furniture with deliberately rough ones. You can make individual elements yourself, for example, a do-it-yourself shelf from wooden construction pallets.
For one shelf you need to disassemble two pallets. The result is:
The following parts are sawn from this material and sanded either with sandpaper or using a special attachment on a drill:
Boards: Quantity - Dimensions (mm)
- 4 - 640x145
- 2 - 680x145
- 2 - 840x145
- 2 - 290x145
- 2 - 640x100
- 2 - 840x100
- 2 - 290x50
Checkers: quantity - dimensions (mm)
The shelf is assembled in the following order:
For the base take two narrow boards 640x100 each and attach the checkers along the edges. Wide 290x145 boards are attached to the checkers perpendicular to the narrow boards, aligning them on equal sides.
To the end part grounds Two boards are fastened vertically with self-tapping screws: narrow (840x100) and wide (840x145). Repeat the same operation with the opposite end of the base.
They are finishing construction box future bookcase, securing two wide boards (680x145) on top. To avoid wood cracking, you can use thin drill pre-drill holes in them.
Then two wide boards (640x145) are attached to the base. The bottom shelf is ready.
For the remaining shelves you will need support strips. To do this, the narrowest boards (290x50) are fixed at the required height.
The remaining boards measuring 640x145 are attached to the installed planks. It is advisable to secure them with self-tapping screws at the ends. This will give the structure durability and greater reliability.
The resulting bookcase can be used both as a rack for your favorite things, and as a shelf for your own shoes.
DIY painting shelf
You won't believe it, but make something unusual original shelf on the wall for your favorite painting, you can do it yourself, and from a simple kit that you can buy in any supermarket.
Creating this masterpiece will greatly simplify Dremel 300 - multifunctional tool with a large number of high quality attachments and milling machine Dremel 231. The point is this: in order for the painting to slide off the shelf, you need to make a groove on its surface.
The boards are laid on milling table and turn it upside down, mark the cutting line for groove and using guides on milling table set the desired depth for it.
A groove is made.
Wooden wall shelf paint V desired color and let it dry.
They screw it to her holders and strictly horizontally attached to the wall. The direction is adjusted using a building level.
DIY children's shelf in the shape of a horse
Using a few wooden planks, you can create a fun bookshelf where your little one will happily put his books.
For work you will need sample pony horses. You can draw it yourself or using special computer programs. The template is printed and a stencil of the main parts of the future pony shelf is cut out: legs, head and tail.
DIY children's shelf. Photo
The stencils are placed on separate boards, traced along the contour and sawed out parts with the appropriate tool.
Cleaning up surfaces of parts and edges with sandpaper.
The “legs” are attached to the “body” with furniture screws, then the head and tail are glued.
You can go over the product with sandpaper again.
"Horse" coloring.
In just a few hours the miracle shelf will be ready for use.
Shelf-shelf
We present to your attention two ideas for shelving shelves that you can easily implement yourself.
The first one from a 40 mm edged board is extremely simple. The bookcase is assembled:
The height and width of the structure are arbitrary and selected locally. If desired, the bookcase can be fixed in the upper part, and rubber heels can be placed along the bottom of the boards.
Second - S-shaped. For manufacturing, you can use scrap boards, plywood or chipboard. 16 blanks are required for one section of the structure rectangular shape, for example, 300x150 mm.
Blanks installed in a certain order, three at each stage.
The first blank is placed on the floor. A second one is attached to it at a right angle, joining them widthwise on the left. The third in width is joined to the first in its length, starting from the far right corner.
The fourth, fifth, sixth - are assembled symmetrically, exactly the opposite.
It is very simple to check how correctly the figure has formed: the second, third and fourth boards should form the letter S.
Experienced craftsmen advise first assembling the structure roughly on wooden pins and fit the workpieces, and when disassembling them, number the parts at the end.
Every detail then sand sandpaper and begin to collect them, according to the numbering. PVA glue is applied to the joint lines and grooves and clamped tightly, holding it in this state for some time.
The assembled shelf is varnished or painted.
DIY shoe rack
The main problem for the hallway at all times remains shoes. How to deal with the perpetrators of the unrest, and do it as economically as possible? Optimal solution- make a shoe rack with your own hands.
Let's share some interesting ideas.
From plywood. More often they make a modular shelf that is attached to the wall and saves space. Using a jigsaw, the plywood is cut into identical rectangular planks, then carefully sanded. U-shaped structures are assembled from the parts and “nested” one into the other, forming a structure resembling a labyrinth.
From tree. From wooden board blanks are cut out with a width of 250-350 mm and a thickness of about 20 mm. The next steps are as follows:
The side walls are cut out to a length of approximately 800-900 mm.
Cut out four shelves of 600-700 mm each.
Everyone's cooking additional details: crossbars and support rails.
All workpieces are sanded.
The support bars are fixed to the side walls with self-tapping screws.
Shelves are laid on them.
Metal corners are attached to the rear end part.
The finished product can be varnished or painted.
From profile. A galvanized or regular profile plus tempered glass is all you need to build a shoe rack with your own hands in a modern high-tech style.
A section of the profile of the required length is applied to the wall and fixed with one screw for now.
Check the level of the horizontal profile line.
Screw in the remaining screws.
Assembling the frame.
Install prepared glass shelves.
From boxes. This is the most economical option do-it-yourself shoe shelves, both in cost and in size.
The outlines of the parts are drawn on the cardboard of the box.
They are cut out using special knife for cardboard.
Then the rectangles are made into boxes, which are placed on top of each other. This is how recesses for shoes are formed.
Fastening is done with staples.
The shelf is assembled on the wall, then covered with decorative film.
Photo of unusual shelves on the wall
An interesting composition on the wall of the living room, which combines several unusual shelving, made in the same style and color scheme, but different in configuration and size.
Not only books can be stored on wall shelves; there is also room for albums, glass and porcelain figurines, cute trinkets, and flower pots.
The bright and eye-catching branches of the Flex Shelf tree shelf will provide additional space where books and magazines can be compactly placed.
These shelves are a real art object on the wall, far from traditional way interior design. A combination of classic and modern forms shelves scattered along the wall instantly attracts attention.
The TV in this composition looks like “ modern painting» in a frame, inside of which open shelves are located asymmetrically. You can place them on decorative elements, photographs and more.
Bright and creative shaped shelf bat looks incredibly original. It will equally stylishly decorate a living room, bedroom or nursery for those who love original solutions. 
Plywood is awesome building material, which is actively used in interior decoration for various purposes. But besides this, it has found its application in the furniture industry. But we won’t talk about factory-made interior items. Let's talk about how to make plywood shelves for different needs with your own hands using a jigsaw and without unnecessary material costs.
Can I do everything myself?
Furniture purchased in a store can have quite high cost. However, if you make plywood shelves yourself, you can save a lot. In addition, such a product will contain your warmth, have exactly the parameters you would like, and will be made on time.
If you think that working with plywood is very difficult, you are wrong to think that way. In fact, it is worth putting in a little effort and diligence, and an original wall or corner piece of furniture self-made will decorate your home. See what a similar kitchen product looks like self made on next photo.
Which plywood to choose
Pay attention to the fact that the thickness of plywood for shelves can be different, since during the production of sheet material of this type, different numbers of veneer layers can be glued together. The thicker the material, the stronger it is. Therefore, experts and experienced craftsmen recommend refusing to purchase three-layer sheets.
It is better to buy sheets consisting of five layers of veneer. They will cost more than three-layer ones, but any savings in this case are not desirable, otherwise during the operation of the product you may encounter a large number of problems and negative consequences.
What kind of shelf can you make?
Yes, whatever. The main thing is to find suitable drawings on the Internet or create them yourself.
If you want, you can make it using a jigsaw original shelf under shoes and place it in the hallway at the entrance to the house.
Can be made mounted corner shelves under icons in the corner of the room, open to the kitchen or carved like flowers. You can build a wall shelf for various decorative accessories or for icons, or you can create a bookshelf, as in the next photo.
List of necessary tools and devices
What do you need to have in your arsenal to create a shoe rack from plywood with your own hands? To do this you will need to have:
- the sheet material itself;
- cardboard or paper;
- stationery scissors or knife;
- regular thin tape;
- a jigsaw for cutting out parts, and in the case of a complex design, a milling machine;
- a simple pencil or chalk;
- roulette;
- hammer and small caliber nails or drill with screws;
- water-based paint or wood varnish;
- drawings of the future product (you can create it yourself or find it already ready-made option on the Internet);
- if this includes a sketch and various decorative decorations.
If you've stocked up standard set for working with plywood sheets. Then you will need to pay attention to the following picture. Here are the drawings of a plywood shelf in the photo. They will be needed during the work process.
Preparatory work
A DIY plywood bookshelf is an exciting adventure and an interesting activity.
First, decide exactly what size the finished corner or wall structure will need to be. That is, answer yourself the question of what its width, length and depth will be.
Also important parameter is the main purpose of the product. It will have a direct impact on the design features of the piece of furniture. Think about what kind of shelf you want to make: a bookshelf, a shelf for shoes, or another type. It will be corner or standard, wall-mounted or floor-mounted. The following photo shows several options for similar pieces of plywood furniture.
Next, decide how the future plywood flower shelf should be decorated. It can be painted, covered with adhesive wallpaper, varnished, and the like. You may want to purchase not simple plywood sheets, but laminated ones. This material looks as if it is already varnished. However, you won't have to do this step of the job. The assembled product will already have a finished look.
So, if the main parameters are determined, you can proceed to the actual implementation of the work.
Main stages of work
Let's give an example of making a bookshelf from plywood with closed side walls. This is a very functional piece of furniture that can be found in almost every home.
We carry out the following work:
- We cut out the shelves from plywood according to the drawings. To do this, transfer the drawings to cardboard, cut out the resulting parts using scissors and fix them on plywood. Using a jigsaw, parts are carefully cut out taking into account centimeter allowances;
- When the main parts of the shelves are cut out of plywood, you need to build wooden frame: to do this, measure the height of the ceilings and cut four pieces of timber to the resulting length. These blocks are fixed vertically on the wall with a horizontal step equal to the length of the future shelves;
- Now you need to determine the depth of the rack and place two marks on the ceiling surface. These points will display external corners future product. Using a plumb line, transfer the marks to the floor;
- Next, install the external supports of the structure: secure the block vertically between the surfaces of the ceiling and floor. In this case, the main reference points should remain the designated points;
- Step back half a meter from the ceiling and place a point on one block, and transfer such points to the remaining points using the rule with a level. This is necessary to mark the corners of the top shelf. Also determine the level of the remaining shelves, and then screw the metal corners to the racks;
- Place plywood shelves on the corners and securely fix them. Sew up the sides of the structure with plywood.
Carefully watch the video presented at the end of the article to understand how to make a shelf out of plywood yourself.
Shelves have long occupied their special place among pieces of furniture. They serve as both a part of the interior and a device for storing things. In addition, they are quite simple to make. That's why many people do DIY shelves– from beginners to professional builders and designers. Today we will talk about in different ways making shelves.
Properly selected and manufactured shelves will emphasize the overall style of the interior of the room and add the necessary touches to it. And of course, they will provide residents with one more convenient place for storage various items- from trinkets to books, shoes and equipment. Any self-respecting craftsman knows how to make shelves from any material, sometimes even from waste materials at hand. Let's look at a few options.
Hallway: DIY shoe shelves
As soon as a person enters any living space, the first thing he needs is a place for shoes. Usually it is used as furniture sets or shelves. Regarding the first option, this is a topic for a separate discussion. Here's how to do it DIY shoe shelves we will tell you. Moreover, of all types of shelves, these are the easiest to manufacture. This is explained by the fact that they are usually floor-standing - after all, no one would think of hanging shoes on... a wall! Although there are such options - in the form of hangers.
Shoe shelves are usually made of wood. The simplest shelf is two, three or four long boards connected by crossbars (stands, sides). For example, as in photo 1.
DIY shoe shelves - photo
The shape and size of such a shelf may vary. It all depends on the size and style of the hallway.
Material – natural wood or sawn blanks from plywood sheets, chipboard.
In the first case, it is better to lightly anneal the finished product using blowtorch, then coat with varnish (colored or colorless) or stain. You can, of course, not anneal it - it’s a matter of taste. It is advisable to coat it with varnish: it will give a more beautiful appearance and protect the surface from moisture.
In the case of making a shelf from laminated chipboard, it is necessary to process the edges and ends of the workpieces. For these purposes, a special edging is sold - plastic (melamine) tape different sizes and colors. It is heated with an iron and glued to the desired place.
Hallway: DIY shelves for small items
From the same laminated chipboard most often done DIY shelves for the hallway, on which small items and hats are stored. They look especially beautiful with built-in lamps, of which there are many on sale today. Mount small led flashlight won't be difficult. And if you place a mirror next to or opposite, it will be very cozy and beautiful!
Another option wooden shelves- shelves made of bars. Their cross-section varies from 16x40 to 25x50 mm. The dimensions and configuration of the shelf itself can be very diverse. Shelves from natural wood and bars are perfect for rooms in a simple rustic country or retro style.
If you need to cut figured edges on blanks made of sheet material, then you cannot do without a jigsaw. It is better, of course, to use an electric one. But if you need to make a whole pattern from a natural board, then you will need a special jigsaw-burner with nichrome thread. In this case, the edge will be already annealed, dark in color, with many stripes-veins. You will also need various fasteners - screws, bolts, corners. Well, glue, varnish or waterproof paint– depending on the type of shelf and material.
Sometimes shelves are made from metal wire. There are usually no special difficulties here. As a rule, shelves are made in the form of several lattice tiers. In this case, the wire is either welded, braided, or simply inserted into the grooves of the side blanks. The entire structure is beautifully designed. There are many other options for shelves made from a variety of materials - you just need to use your imagination.
DIY shelves for the kitchen - a good gift for the hostess of the house
One of the places in apartments and houses where you can’t do without shelves is the kitchen. To make good DIY shelves for the kitchen, it should be borne in mind that they should not only be in harmony with the entire design, but also be ergonomic - comfortable for the housewife.
Moreover, kitchen shelves must be reliable. After all, they can store not only dishes, kitchen utensils, cutlery, but also food supplies - cereals, seasonings, ingredients. Who will be happy if all their weight turns out to be too heavy for the shelves and they end up on the floor?
Before you start making a shelf, you should carefully consider its design so that it fits harmoniously into the interior of the kitchen. For example, photo 2 shows bottle shelves. Those who love a glass of good wine before dinner will definitely appreciate them. The shelves look quite elegant and original.
Wine shelves They themselves are made quite simply. Two blanks - planks of hard wood, well processed, are fastened together. To do this, you can use any bars and screws, or do everything on the grooves. Previously, holes for the necks are drilled in the main planks at equal intervals - using a jigsaw or drill with a special attachment. The structure is varnished and mounted on the wall. To do this, you can buy beautiful brackets or ordinary ones. profile corners. The main thing is that they do not spoil the finished appearance of the shelf. The number of vertical slats, as well as the distance between them, can be combined.
For a regular kitchen, shelves for 3-5 bottles are suitable. Otherwise, the owner of such shelves may be considered an experienced sommelier. By the way, bottles in such shelves are stored exactly as needed - in a horizontal position. Bottle shelves are best mounted in dark places, because real wine is stored in dark wine cellars.
How to make DIY shelves for flowers
Flowers play a big role in the style of a room and in the microclimate of the room itself. They are available almost everywhere - both at home and at work. Usually they stand in designated places: on window sills, shelves, racks, cabinets. Having done DIY shelves for flowers, any owner will please his other half. Moreover, the shelves will be unusual, one might say creative and exclusive.
Photo 3 shows flower shelves made from old... suitcases.
DIY shelves for flowers - photo Yes Yes! As we see, if you have imagination and skillful hands You can give old things a second life. Such shelves are especially suitable for lovers of retro style.
As a rule, old suitcases have a waterproof surface - leather or its substitutes. Therefore, such shelves will not be afraid of water droplets when watering flowers. These shelves are easy to make. First, part of the suitcase is carefully sawed off, then a frame is made from planks inside (so that it does not sag under the weight of the flower pot). Instead of the cut part, a base is made of waterproof plywood, to which the frame is attached. The entire structure is fixed to the wall - inside the resulting shelf or below using corners, dowels or self-tapping screws. Of course, the surface of the suitcase needs to be carefully treated. After which you can decorate your room with a couple more flowers.
Making your own shelves for books
The next shelf in our line is the bookshelf. Sometimes many apartments contain a lot of books. Despite the abundance of modern sources of information, people love to read classic paper books and magazines. Do DIY shelves for books won't be a big deal. For example, a shelf like the one in photo 4.
DIY bookshelves - photo It is done like this: several pieces of plywood of the same width are cut out and different heights, leveled, fastened together, and then painted or stained. And that’s it – the shelf for books of different sizes is ready! All that remains is to mount it on the wall. The second option for such shelves is to select the necessary grooves for the size of books in the part of the wide block and secure the block to the wall. On the remaining flat part of the shelf it is convenient to place various small items or souvenirs.
Unusual DIY shelf for a children's room
There are always a lot of things and toys in the children's room. Therefore, shelves will be very useful there. Besides classic wood For shelves, options from other materials are possible. Somehow: pieces of PVC or other lightweight pipes. These are made DIY shelves for the nursery easily. They are especially popular among craftsmen. Photo 5 shows such a shelf in the manufacturing stage.
For a shelf, a pipe with a diameter of at least 100 mm is taken, cut into equal sections up to 300 mm long, after which they are processed and fastened together (with glue, tightening or other means) in a checkerboard pattern like honeycomb. Processing consists of grinding the ends, painting or covering individual pipe-cells with self-adhesive films. Naturally, bright colors will prevail in the children's room. Therefore it is necessary to give individual elements shelves in different colors. Such shelves do not have sharp corners, which is important, and children really like them.
Convenient DIY shelves for the bathroom - a note for craftsmen
Usually, various small things are stored in the bathroom: soap dish, toothbrushes, razors, scissors, napkins. For this purpose, hanging racks and cabinets are used. As a rule, they are all similar to each other. Having done DIY bathroom shelves room, you will slightly diversify its interior. About the same as in photo 6.
Of course, you can hang such shelves anywhere. But the fact is that they are not afraid of water! Therefore, the bathroom will be the right place for them. And they are made very simply - plastic window sill It is simply cut evenly into the required lengths, which are mounted on the wall. The side ends are closed with original decorative caps.
The shelf can be fastened in different positions - with the edge down or up. Depending on this, there will be either a flat front surface or with a protective edge. It is better to make the fasteners invisible. Otherwise, you can use various chrome-plated brackets and holders, which are many in hardware and plumbing stores.
Finally, here are a few useful tips. For any shelves from wood materials The following manufacturing rules are typical.
- You need to choose high-quality dry workpieces (bars, boards) without cracks and knots, and carefully treat them to remove burrs.
- When using self-tapping screws, it is better to pre-drill a hole with a smaller diameter than the screw itself to avoid cracking. Today, instead of ordinary self-tapping screws, special furniture screws - confirmants - are widely used.
- Can be connected wooden parts using figured protrusions - grooves, dowels, recesses. In this case, hard types of wood should be used - birch, oak and the like.
- In order for the self-tapping screw to screw into the wood better, you must first rub it on a hard piece of soap.
To make any shelves you will need the most different instruments and materials: hacksaws, a circular saw, grinder, screwdrivers, set of furniture keys, paints, varnishes, adhesives. Before making a shelf, you need to think carefully about its appearance and place in the room. Then carefully draw the blanks and begin assembly.
When making shelves, don’t be afraid to use your imagination - very often shelves are made from the most unexpected objects and materials! Such solutions as shelves made from old things have long been known: guitars, skateboards, boats, TVs, shipping boxes and pallets. Such products are very original and add unusualness to any home.
Wall shelves - photos for your inspiration
We have selected photos of several wall shelves, the design and photos of which may surprise and inspire you.
