How to make a glowing table from wood. DIY glow in the dark table

Children's games with sand contribute to the development of visual and tactile perception, fine motor skills, imagination and artistic and aesthetic taste. For such activities, you can make a sand painting table with lighting yourself.

What will you need to make a sand painting table?

The materials and tools needed to make a glowing table with your own hands are inexpensive.

Necessary materials

1. Boards.
2. A sheet of plywood 10 mm thick or furniture board.
3. Glazing bead.
4. Plexiglas.
5. Ribbon with light bulbs.
6. Fork
7. Switch.
8. Nails.
9. Self-tapping screws.
10. Water based varnish.

Required Tools

1. Thicknessing machine for processing boards.
2. Hacksaw for cutting boards and plywood.
3. A hex key for driving screws or a hammer when using nails.

How to make a sand painting table?

A table for practicing with sand is made in stages. Since the presence of light is the main advantage of such a table, great attention should be paid to installing light bulbs. Other stages of manufacturing the structure are also important.

Stage 1: choosing acrylic, glass

The format of acrylic or glass should be selected according to the parameters of the inside of the table.

For the safety of children, it is better to use acrylic. To ensure that the light diffuses evenly, it is better to use white or beige material with a thickness of 5 mm or more. You can purchase thicker transparent acrylic, but in this case the interior of the table will be visible and the light will be too bright. The disadvantage of acrylic coating is its high cost.

More cheap option- glass. It should be thick enough, preferably white. Suitable glass can be found in advertising workshops. If the material is transparent, you can stick a white protective film on top. It will help create the desired light intensity and protect children if the glass breaks.

Stage 2: measure seven times - cut once

If a sheet of glass or acrylic is of irregular shape, it is recommended to cut off the excess with a mounting knife using a ruler. You should not rush when performing this operation, as the knife may jump off the cut line.

You can buy acrylic in any size, and then cut the boards and plywood with a hacksaw to suit the size of that covering. You must first process the boards on a surface planer to make their surface smooth.

The plywood base of the table must be cut, taking into account the format of the acrylic and the thickness of the side boards. To perform the operation more accurately, you can use a paper blank. The plywood should cover the sides of the table, but not extend beyond them.

Boards can also be trimmed if necessary. Their height and width are selected so that there are no protruding or uneven edges of the table. The length of the boards should not be less than the parameters bottom sheet plywood to prevent sand from spilling out. It is also recommended to make them the same height.

Stage 3: trimming corners and fitting acrylic

All surfaces must be smooth to prevent children from getting hurt. There should also be no sharp corners for safety reasons.

After determining the parameters of all components, you can begin assembling the table. Boards can be connected with screws or nails. The result should be a structure resembling a box.

To install acrylic or glass, glazing beads must be attached to the top of the resulting box. Their size is selected based on the internal parameters of the table. It is also better to nail the bars with small nails.

After this you need to check whether it fits acrylic coating in a frame prepared for it. If not, it can be trimmed. The coating should not be installed before installing the backlight.

Stage 4: electrical

To make a backlit table, the best option is a self-adhesive LED strip, which can be different colors, sizes and configurations. It is charged from a 12 volt power supply. You can independently attach a switch and plug to the tape for mains power.

The brightest light will come from white bulbs. Due to this, the contours of the image created with sand will be clearly visible. The darker the light, the worse the drawing will be.

Stage 5: lighting installation

It is necessary to drill a hole in the bottom of the table through which the wire is passed. Several knots are tied at the end of the plug that remains inside the box so that it does not fall through.

Before fixing the LED strip inside the box, you need to lay it out inside to make sure that its length matches the dimensions of the sides of the box. Otherwise, it can be cut off. It is better to glue the tape from the end that is closer to the connection cable, so as not to make a new hole in the table body. For reliability, you can additionally secure the LEDs with double-sided tape on the bends and corners.

To check, the tape should be connected to a power source before installing the glass.

After this, the acrylic must be glued to the glazing beads. You can secure it with self-tapping screws, carefully calculating the size of the holes for them, since if they are not larger than the fasteners, the acrylic coating may crack.

If you can’t buy LEDs, you can use New Year's garland with small light bulbs, having previously trimmed it to fit the size of the table. You can secure it with small pieces of adhesive tape.

Such lighting will be more interesting for children, as the color of the light bulbs will change. It is better that this change occurs slowly, which will promote relaxation and stimulate the creative activity of children. flickering bright colors will tire them.

Finally

A table made in this way will not take up much space. It will be useful not only for sand drawing, but also for copying images or drawings. It is important to keep the acrylic coating clean and follow safety precautions when working with it to make painting a joy.

• Tool
• Materials
• Features of assembling a countertop made of pine boards
• Video for step-by-step table assembly

Furniture models that emit a glow always attract us with their unusual appearance. A luminous table assembled with your own hands can become a decoration in a living room, in the kitchen or in a summer cottage. In this instruction we will explain how to make a glowing table from wood with fluorescent inclusions in the tabletop.

To “make” the table glow, we need to acquire the appropriate tools and materials.

We purchase or rent the following power tools.

1. An electric drill used to make holes for cotter pins. Using abrasive wheels, we create decorative indentations in the body of the wood with a drill.
2. A grinder that is used to bring the surface of the tabletop to a perfectly smooth state.
3. Hammer.
4. A set of clamps that will be needed to tie together boards.
5. Planer necessary for pre-processing wood.
6. A jigsaw needed for cutting the ends of a tabletop.
7. Gas-burner, which we will use to burn cavities in the wood.
8. Related tool(screwdrivers, chisels, saw, tape measure, construction knife And so on).

Materials

To make a luminous wooden table with your own hands, we select the materials necessary for this:

• 4 cypress or pine boards dimensions 1500 x 150 x 40 mm. We will need this wood to make a tabletop that will emit a glow;
• metal legs;
• epoxy resin in two plastic bottles of 118 ml each;

• plastic cups – 6 pcs.;
• fluorescent powder to create a light background – 100 g;
• scotch;
• plywood or plastic sheet - 600 x 1500 mm.

Step-by-step instructions for assembling a glowing table

1. We connect the boards with cotter pins and glue them together. We tighten the shield with clamps until the glue completely hardens.
2. We process the side edges of the tabletop with a plane and grind them.

1. We cut the ends of the table with a jigsaw to one level. Then we polish them.
2. Cypress wood has resin chambers in its structure. We clean them semicircular chisel without disturbing the natural form.
3. We blow out the cavities with a vacuum cleaner and dry them with a hairdryer.
4. Preparing the epoxy filler. Mix the resin and hardener in disposable plastic cups. We also add a phosphor there (we use 10 g of powder per 100 g of resin).

1. To avoid resin leakage, cover the table with tape around the perimeter and place pieces of plywood or plastic underneath.
2. Fill all cavities and cracks in the tabletop with a fluorescent mixture. We leave wood material at rest for a day. During this time, the solution will completely harden.
3. We process the entire surface with a grinder until a perfectly smooth plane is obtained.

1. We cover the tabletop with 3 layers of furniture varnish.
2. Forming support frame from boards 50 mm wide or more.
3. We attach the tabletop to the frame and install the legs. As a result, we get an original luminous table made from wood with our own hands.

Labor and materials costs

Let's calculate how much a luminous table made of cypress boards measuring 600 x 1400 mm will cost. We will take average prices for materials from these online stores.

1. 4 cypress boards 1500 x 150 x 40 mm will cost 1000 rubles.
2. Epoxy resin Gold Glass, 1.35 kg – 2200 rub.
3. Phosphor powder, 200 g – 800 rub.
4. Metal legs – 600 rub.
5. Fastening accessories – 200 rub.

Total costs will be 4800 rubles. (as of the date of publication of the article).

As practice has shown, we spent no more than 16 hours making this table.

You can also assemble an LED table with your own hands. The invention of microbulbs provides great opportunities for design design furniture. Unlike a fluorescent tabletop, this type of furniture requires a transparent table surface. How to make an LED table is a topic for a separate article. In it we will tell you what materials you need to purchase, what equipment is best to use, and how to make table lighting with LED strip.

• Like

You can make a table for your home from the following materials:

• natural wood;
• plywood;
• laminated chipboard.

Each has its own advantages and disadvantages. Can be made from wood original table, decorating it with carvings. Give an unusual shape to the legs and table top. But the cost and weight of the structure will be high. Plywood is the cheapest material of the above, less durable and more fragile. The material must be additionally coated with varnish or paint, and therefore the product will look less aesthetically pleasing than a similar one made of wood or chipboard.

A product made from chipboard is considered optimal in terms of price and quality. The ease of processing the material allows you to realize almost any table idea. Since furniture is often made from chipboard in factories, you can use material from finished products. Many homeowners have cabinets that they no longer use. The side walls of the wardrobe can be used as a tabletop and counters. The thickness of the slab must be at least 16 mm. If the table has drawers, you need to purchase fiberboard. This material is used to make the bottom to lighten the structure.

For laminated chipboard, you need to purchase a matching color edging for the ends. When purchasing the material, you can order cutting according to the required parameters and gluing the edges (specialists use professional equipment).

Required Tools

To make a children's desk with your own hands you will need the following tools:

• self-tapping screws;
• PVA glue;
• sandpaper;
• jigsaw;
• drill;
• screwdriver or screwdriver;
• dowels;
• milling machine if you are planning a shaped tabletop;
• square, tape measure and pencil;
• decorative plugs for screws;
• accessories for drawers.

If the table does not have drawers, then the last point is not taken into account. If you plan to make them, you will need handles and roller mechanisms.

Stages of work

To make a table for a schoolchild with your own hands, you need to have a drawing. You can compose it yourself or find a ready-made one. If you plan to purchase laminated chipboard, you should order cutting of the material according to the drawing, as well as gluing the edges. In a carpentry workshop, such services are cheap, and the quality of work is high.

When calculating the height of the supports, it is necessary to take into account the fact that the child is growing. Therefore, you should make them standard, and for convenience, use a chair with an adjustable seat height.

The step-by-step instructions involve the following steps:

1. All parts are marked on the chipboard, which are then cut out with a jigsaw. You should choose a thin saw and set high speeds to avoid chipping.
2. Making a shaped base involves using a milling machine. The tabletop should be secured so that it does not move. Use a hand router to give the base the required shape.
3. All edges must be cleaned with sandpaper.
4. When all the elements, including shelves and drawers, are cut out, proceed to gluing the edges. For this you will need construction hair dryer or iron, cotton cloth and respirator. Work must be carried out on outdoors or in a well-ventilated area, since PVC releases harmful substances when heated. Gluing is done as follows:
   • the tape is applied to the end of the chipboard and heated;
   • the glue dissolves quickly, so you need to move the iron or hair dryer quickly;
   • after heating, the edge is pressed with a rag to the chipboard and smoothed;
   • move to the next section and repeat the actions;
   • Instead of a rag, you can use a hard roller.

Table assembly

1. When all the table elements are ready, assembly begins. First, the frame is assembled. The tabletop is connected to the racks using confirmations, self-tapping screws or dowels. In the first two cases, a hole is made with a thin drill at the junction of the base and the side elements. Then, using a larger diameter drill, make a recess for the screw, the head of which should be slightly recessed into the surface or be at the same level with it.
2. If the table cover will be attached to dowels, the diameter of the hole should be made according to the size of the fastener. It should fit tightly into the opening and provide high-quality adhesion of the parts. Before connecting the racks to the tabletop, the recesses are coated with PVA glue. After assembly, allow the glue to dry.
3. The desk drawers are assembled next. The connection is made using confirmations or self-tapping screws. The bottom is nailed with small nails.
4. Before installing the guides, you should carefully measure everything and mark the position of the drawers using a level. One element of the roller mechanism is fixed with self-tapping screws in the table niche, and the second is screwed to the bottom of the drawer. If the loads on the guides will be large, then you need to choose metal products. But plastic slats are suitable for a children's table.
5. Handles are installed. The joints are masked with stickers under chipboard color or decorative buttons.

Wooden table option

This way you can make a simple desk with drawers from laminated chipboard. Manufacturing from wood involves the following steps:

1. The tabletop is assembled from several boards, which are pre-cut to length. The wood must be sanded with sandpaper. The edges should be carefully adjusted to avoid gaps. If a tongue and groove board is used, the tabletop will be solid. In this case, the outermost element is cut with a jigsaw.
2. The base can be given any shape. To do this you need to use a milling machine or plane.
3. You can connect the boards together using the tongue-and-groove method or using dowels. To ensure greater strength to the base of the table, the joints are coated with PVA glue.
4. Then the legs are made. If they are in the shape of pillars, they can be carved.
5. If you plan to install boxes, a box is made on one side. To make the structure lighter, plywood is used for the sides and bottom. The front wall is made of wood.
6. After all the elements are made, the table is assembled. Fixation of parts is carried out using self-tapping screws or confirmations. The tabletop should be installed on dowels or screws.
7. The last stage is painting work. The wood is sanded, cleaned of dust and varnished. If the base has unevenness, you can successfully beat them by making a glowing table. You can make the indentations yourself using a chisel. To make a glow-in-the-dark tabletop you need:
   • mix epoxy resin and fluorescent powder in a ratio of 10:1;
   • fill all the recesses and let dry;
   • coat the wood with clear varnish.
8. Before applying the protective layer, you can coat the material with stain. To preserve the wood structure, it is advisable to choose clear varnishes. Shipboard is perfect for these purposes, as it has high mechanical strength.

By making a table with your own hands, you can realize any idea and make your child’s workplace original and unique.

Wood is the best material for making garden furniture

The greatest success among summer residents is outdoor garden furniture made of wood. However, not all types of wood are suitable for these purposes. For example, experts advise abandoning materials made from pine, due to the fact that this raw material is very delicate and sensitive to impact. external factors. It is better to choose furniture made of oak, ash or hornbeam - their wood is hard, durable and easy to care for.

In addition, a distinctive feature of wooden furniture is that it is an absolutely environmentally friendly product, striking in its beauty and variety of textures. Garden furniture is made from wood quite quickly, the main thing is to use high-quality material for these purposes.

Fits harmoniously into the overall design summer cottage- dinner table. In the garden it will perform well both in brown and in brighter colors. Besides large table The set should include comfortable chairs, sitting in which you will feel quite comfortable.

To make the seats comfortable, it is worth bandaging them with removable cushions. It's also good when the chair can be folded. Unused, they will occupy less space, and in winter they can be easily hidden in the garage or basement.

The easiest way to make furniture is from ready-made material. When disassembled, the boards are easier to process, impregnate and prepare for painting. All you have to do is assemble all the parts into a single structure, according to the drawing.

There are many ways to make garden furniture. The Internet will help you choose the right option for you, where in its vastness you can easily find exactly what you need. Stylish chairs, beautiful tables, comfortable sunbeds, swings, chairs - this is just a small list of what you can do with your own hands. Of course, for this you will need some carpentry skills and good tool, as well as the presence fresh ideas in my head.

How to choose the right style

The most fashionable sets garden furniture- these are those made in modern or French style; hi-tech, country and minimalism styles are also quite popular. Country music is characterized by an uneven, rough structure. Often they combine wood and cast iron, finished with metal-plastic.

Forged furniture is appropriate in romantic gardens French style. If you want to introduce a subtle note of Provence or shabby chic into a green corner, it is best to install whitewashed rattan furniture.

Comfortable furniture- this is one of the main items in any green corner. It can be a companion for morning coffee or lunch - barbecue. Daily relaxation in the fresh air, especially on sunny days, is a balm not only for the body, but also for the soul!

Leisure furniture

Garden dining furniture isn't everything. To fully enjoy a pleasant holiday among blooming greenery, you also need to buy a complete set of furniture. Sets include a sofa, two armchairs or chairs, plus a low coffee table. The most fashionable designs are those made of rattan, strewn with large pillows.

Soft accessories are mainly covered with cotton. Underneath the fluffy covering fabric is highly elastic polyurethane foam. Armchairs, sofas and chairs often have a cubic shape, making them voluminous and very comfortable.

Garden set made from pallets (pallets)

Wooden furniture made from pallets is also quite popular. This design is very easy to knock down, paint and impregnate. You can also sew pillows yourself or buy them at a garden accessories store.

Producing furniture from wooden pallets (pallets) is quite simple and, most importantly, fast. Just 2-3 pallets will be enough to fold one on top to get a coffee table. Impact-resistant glass with machined edges is placed on top of the table. That's it - the coffee table is ready, all that remains is to make the chairs. You can also make them from the same material, only here carpentry skills will come in handy. Using a hacksaw or chainsaw, cut the pallet into two parts, one of which will serve as a seat, the second as a backrest.

The presence of a sofa, armchair or lounger made from pallets in the garden will emphasize individuality landscape design your site, will create a cozy atmosphere, making it truly extraordinary and worthy of attention.

If you have a large number of pallets (the material can be purchased for a small amount in construction stores), from which you can organize full-fledged place for a holiday where you can relax with a large group. In this case, you can completely abandon the construction of a gazebo or open terrace.

Construction pallets (pallets) can be used both painted and unpainted. Their design feature allows you to store something useful between the rows of boards. This space can also be occupied with drawers, providing them with special mechanism and beautiful hands

Making Lumobeton with your own hands

It’s quite easy to “prepare” the material if you have a few necessary tools. The production technology of Lumobeton is similar to the production of other finishing tiles. The main thing is to follow the basic instructions: carry out all the processes step by step and mix the components in the right proportions to obtain the correct mass.

Necessary equipment for the production of decorative tiles:

1. Electric mixer.
2. Vibrating table.
3. Matrices.

To start the production of Lumobeton, you do not need a large area; all tools can be placed on 20 m2.

Lumobeton includes:

• Quartz sand.
• Dyes.
• Gypsum G16.
• Luminescent pigment.

Having mixed all the necessary components in the required ratio in a mixer, pour the resulting homogeneous mass into Silicone forms.

The next step is to place the forms on a vibration table for 3 to 5 minutes. Afterwards, we place the molds in a dry place with a temperature of 25–30 °C and keep the molds for 5–8 hours.

After the time has passed, remove the resulting tiles from the molds. That's it for production decorative stones over. You can congratulate yourself - now you have glowing bricks in your arsenal!

The manufacturing technology of Lumobeton is not complicated, but it requires care and patience. But, at the end of the process, you will be able to completely transform the design of your walls, without spending a lot of money on purchasing material, but getting it for a few pennies. And it looks really cool!

Do-it-yourself busy board for your son

In fact, boys' and girls' toys are up to three years are no different. To all the kids early age I want to twist, move, turn on or take something apart. You can only win back color palette and the general theme of the board.

For example, a bodyboard for girls usually contains elements of clothing and is made in bright colors. For boys, a busy board can be designed in the form of a boat with a compass and a steering wheel or a road surface with a real traffic light. It’s good if you can make opening windows, behind which you can hide developmental elements.

You can learn more about what the filling of a homemade business board can be from the article: “How to make a development board with locks for your baby.”

The idea of ​​teaching children using ordinary household objects was first voiced by Montessori. Her idea that a child can acquire all the necessary skills himself if he is immersed in a properly organized environment is still supported and used by many parents and teachers for the development of children.

How to make a busy board - step-by-step instructions

It will help to understand that creating a business board is a fairly simple matter. detailed photo instructions.

For the board we will need a base (in our case plywood) 70 cm long and half a meter wide and various elements– roller, mirror, wheels, roller, etc. (see photo).

How to prepare a base with doors

DIY lacing

To make a lacing sneaker, hooks and lace are useful. Draw a sneaker and color it bright colors. We drill holes in the places where the hooks will be.

We twist the hooks, the sharp ends protruding from the other side, cut them off with a grinder or hammer them in.

All you have to do is lace up your sneakers and the toy is ready.

Busyboard with roller

Place a roller at the top of the board. It will be attached to the same hooks that were used to make the lacing, and to a threaded knitting needle.

Putting on necessary elements(balls, roller and rubber wheels), secure the ends of the knitting needles with screws and glue.

Child development methods:

• Dienesh logic blocks
• Fold Nikitin's square
• Educational games for boys 3 years old

To complete the work on the bodyboard, all that remains is to screw in the remaining elements and fastenings for the wall.

Busy board is an ideal toy for children 1-2 years old. In addition to the undoubted benefits for fine motor skills and the acquisition of skills necessary for a one-year-old child, another advantage is its accessibility. After all, the materials for making boards can be found in any home, and it takes very little time to create.

Making the main New Year's symbol

It's impossible to imagine this winter holiday without a decorated Christmas tree, which is installed in the largest room in the house. If this is not possible, or people deliberately refuse to use a living tree, then you can create it with your own hands from ordinary Christmas tree garlands, placing them on an empty wall.

The garland needs to be attached to the wall with transparent tape, creating the outline of the Christmas tree. Cut out Christmas stars or snowflakes from white paper and glue them onto a stylized Christmas tree in any order. To give such wall installation at all festive look, below under the tree you can lay out gifts and put New Year's figures of Father Frost and the Snow Maiden.

Note: 30 inexpensive, but original and pleasant New Year gifts from AliExpress

Make it spectacular new Year decoration for the home you can use dry tree branches. They need to be wrapped tightly with twine at the base, placed in a suitable container and hung with garlands. Thus, in a large room you can create an entire winter forest by installing such a New Year’s installation in a corner, on a bedside table or on a windowsill.

The children's room is decorated in the same way. Children will love the glowing composition of trees and a fairy-tale house, which will act as a magical night light. You can also make the same Christmas tree on the wall in the nursery, using multi-colored paper, tinsel, garlands and unbreakable Christmas tree decorations to decorate it.

Christmas trees can be made from any materials if you put a little imagination and effort into it. The photo shows how impressive small multi-colored fabric Christmas trees in pots look.

To make them you will need:

• salty dough;
• any thick fabric;
• thin wooden or plastic sticks for the base;
• any filler;
• small pots or plastic jars from packaged foods small size, which will need to be painted with acrylic paint of a suitable color.

For salted dough, you need to take equal parts of salt and flour, mix everything, dilute with a little water and knead into a tight dough. Cut two halves from the fabric in the shape of a Christmas tree silhouette, sew them by hand or on a machine, turn them inside out, stuff them with filling, insert a stick into the resulting figure and sew up the bottom. Place the salted dough in the pot and insert the finished Christmas tree into it.

Interesting: DIY New Year's crafts for 2019 Pigs from all sorts of things

Such handmade crafts can be placed on all the window sills in the house, creating New Year's compositions from multi-colored rag wood, candles, Christmas decorations, fir or pine cones painted with white, gold or silver paint.

The pictures show step by step how to decorate a house for the New Year using lamps in the form of a New Year tree. For this you will need:

• cardboard;
• colored decorative mesh, which often remains after bouquets of flower shops;
• PVA glue;
• New Year's LED garlands;
• buttons and beads;
• silk ribbons;
• small bells.

Make a cone of suitable size from cardboard. Screw strips of decorative mesh onto it in a spiral, wetting them in a wide cup of glue. When the workpiece dries, take out the cardboard, insert an LED garland inside and decorate the resulting night light in the shape of a Christmas tree with beads, buttons and rhinestones.

This Christmas tree can be placed in different places in the house:

• on the windowsill in the dining room;
• on the refrigerator in the kitchen;
• in the nursery;
• by the bed in the bedroom.

Handmade symbols of the upcoming holiday will bring warmth, comfort and joy to your home. Such trees can become an alternative to the traditional forest beauty, or its spectacular addition.

Note: How to celebrate the New Year 2019 so that it is successful

Having decorated the hall for the upcoming holiday, you should pay attention to other rooms in the house.

Hallway decoration

To create uniformity in the living space, you should introduce at least a small symbolism of the upcoming holiday into each room. We should not forget about the hallway, where every home begins. Usually it's no different large area, therefore, to decorate it, they most often use the space of the entrance doors, which are decorated with a New Year's wreath made of fir branches and Christmas tree decorations.

The photo shows step-by-step instruction making such jewelry.

To do this, use a ring made of thick cardboard, onto which you can screw decorations that imitate spruce branches with toys. You can also use thick and rigid wire, which is rolled into a ring and then natural spruce branches are attached to it using threads. The resulting wreath is decorated with ribbons, fir cones and Christmas balls. When creating a cardboard or wire frame, you should not forget to make a ring on which the decoration will be hung on the door.

You can also use a variety of garlands and pendants to decorate your living space, which you don’t have to buy. They can be made with my own hands from plain paper and even old newspapers.

This photo shows what an interesting wreath can be made from ordinary old newspapers rolled into a cone. The newspapers themselves can be painted white, gold or silver using special paints from aerosol cans, which are inexpensive. When the composition dries, its center should be decorated with a bunch of glass balls.

Wreaths can be made from any materials:

• strips of green felt of different shades;
• wine corks;
• silk ribbons gathered into intricately folded buds;
• old newspapers and even from plastic bottles.

You can use any available means as a material for New Year's decor, showing your imagination. For example, from the bottoms of half-liter plastic bottles and an inexpensive LED garland, you can make beautiful glowing snowflakes, from which you can also make a wreath for a door or wall.

To do this, you need to cut out the bottoms, paint them with white paint with a pattern of snowflakes and fasten the two halves above each light bulb using metal staples, Moment glue or thin wire.

Kitchen decoration

Before the holiday, you can not only decorate the hall and the hallway with the nursery. You should introduce an element of festive decoration into the kitchen space by creating an installation of mugs in the shape of a Christmas tree on a free wall.

This is a room where all family members visit during the day, so it simply needs to be dressed up for the New Year. It should be taken into account that due to the limited space and functionality of the room itself, a real Christmas tree cannot be placed here.

In the kitchen, you can decorate the windowsill by placing small Christmas trees in pots, made by yourself, or by hanging paper garlands and toys on the cabinets. self-made. If you choose correctly color scheme If you add such decorations to the style of your kitchen, you can create a spectacular and original decor for such a room with the help of homemade Christmas tree decorations.

On a note!

On the window you can make a spectacular composition from pictures cut out of white paper.

To create these themed pictures on windows, you can use white paper with an adhesive back. Stencils can be found on the Internet.

A garland of spruce or pine cones gathered on twine will look great on a work apron. On dining table or on the refrigerator, you can put a vase with a New Year's composition. Along with regular decorations, it can also contain edible things (sweets, cheesecakes, cookies). You can bake shaped shortbread cookies, which will always be a pleasure to treat you to during the day.

To bake it you will need:

• 150 g butter or butter margarine;
• a glass of sugar;
• 3 eggs;
• 400 g flour;
• cinnamon;
• nutmeg;
• orange zest;
• raisins and nuts.

If desired, sugar can be replaced with honey. Knead shortbread dough from the above ingredients, wrap it in film and keep it in the refrigerator for half an hour. After this, roll out a layer of 3-4 cm and cut out using special molds, which are found in every home. This way you can make snowmen, bears, hearts, Christmas trees, Santa Claus or other figures.

Cookies should be baked in an oven preheated to 180°C for 40-60 minutes, making sure that they do not burn. Such edible toys can be hung on the Christmas tree using silk ribbons or twine. To do this, a special hole should be made in the raw workpieces.

Nursery decoration

You definitely need to decorate the space of the children's room, creating a magical atmosphere for the child. winter's tale. For this, different vertical surfaces:

• walls;
• interior doors;
• window.

On the nursery doors with inside A Christmas tree made from garlands will look great. This installation will additionally serve as a night light in the evening.

Children's windows and window sills are decorated in the same way as in the kitchen - with the help of stencils and small Christmas trees made from natural and improvised materials. If the installation is illuminated with garlands, the child will spend hours looking at it and immersed in the atmosphere of a magical winter fairy tale.

What to do if you need another one sleeping area but you are experiencing some financial difficulties, because of which the purchase of a new piece of furniture is postponed indefinitely? In this article we will tell you how to make a bed with drawers from pallets with your own hands, which will become an excellent alternative factory products.

• The most simple design
• Bed with mattress box
• Compact bed
• Bed lighting
• Materials for creating backlight
• Step-by-step instruction
• Multi-story bed option
• Installation on wheels
• Surface treatment

Pallets are an excellent base for DIY beds. From a financial point of view, this option is quite profitable, since ready-made frames They are very expensive in stores. It should be noted that today you can buy new beds to make, or you can find used products. In the second case, the cost of the source material may be symbolic.

So, let's look at several options for creating beds from boards and pallets.

The simplest design

A bed made of pallets in your simple design may consist of several identical finished blocks, which are carefully fastened together. You only need to buy a mattress of the appropriate size separately. Such a bed can be designed for one or two beds. From timber and pallets you can create a headboard that will match the width of the main bed.

Bed with mattress box

You can make a bed from pallets and solid wood by mounting a special box to accommodate the mattress required sizes. For this wooden pallet You should turn it upside down and cut out the middle support.

Then we fix the cut out part between the two side ones so that the letter “P” is formed. The same must be done with the second pallet. After preparing both halves of our bed frame, they need to be connected with timber or boards. The finished box should be installed on two pallets connected to each other.

Compact bed

To make a single or children's bed, you need to install and connect two pallets to each other. You can paint the structure with paint, leatherette or fabric. After this, you will need to place a suitable sized mattress on top and cover it with the selected bedding.

Bed lighting

To give the bed more original look, you can arrange additional lighting. We'll tell you how to do it now.

Materials for creating backlight

To create the backlight you will need a small list of materials, including:

• extension cord for two sockets;
• duralight (luminous cord sold in stores with lighting equipment);
• strip fastenings;
• self-tapping screws

It is necessary to install the glow cord correctly so that the lighting looks as attractive as possible.

Step-by-step instruction

1. Connect the plugs with duralight and insert all the contacts deep into the channels through which the wiring runs.
2. Place a special cap on the free end of the glowing cord.
3. To each of two pieces of duralight (185 cm each) attach electrical cable.
4. Test how the strips work by connecting them to the network.
5. Fasten the duralight around the perimeter of the bed frame, maintaining a distance of about 25 cm.
6. Secure the cord in the fastenings.
7. Check how the backlight works by connecting duralight strips to the network.
8. Replace the mattress.

Multi-story bed option

Many people who want to make their own bed from solid wood and pallets choose drawings of a single-story product. At the same time, nothing prevents you from creating a “multi-story” bed, which will be complemented by convenient shelves for placing books and other useful things.

Installation on wheels

Practical and original version is to install a pallet bed on wheels. With their help, you can easily move the sleeping place within the room. Please note that the weight of the bed is quite large, so look for powerful wheels that can withstand high loads.

Surface treatment

In order to extend the life of the bed and give it a finished look, the product can be coated with varnish or paint. It is better to apply the compositions in two or three layers. You can choose any color scheme taking into account the surrounding interior.

Some people choose the natural color of the wood rather than painting the pallets. Remember that only completely new pallets should not be washed or painted, since you do not know what goods were transported on the pallets. Perhaps in the future the organic matter contained in the wood will begin to decompose and smell unpleasant. To avoid this, the wood should be treated with disinfectants.

Now you know how to assemble a bed from pallets with your own hands, so you can go shopping for pallets and stock up the right tools. Choose the best option, come up with a unique design and get to work.

After making furniture from epoxy resin gained popularity in the field of residential decoration, the trend has not stopped developing. IN Lately very interesting ideas appear that can be considered unique. We are talking about illuminating the tabletop as a way of additional decoration.

The idea itself is not new, because pieces of furniture have been illuminated for a long time LED strips or LED lamps. However, backlighting epoxy resin introduced completely new trends in the development of design.

Varieties

Looking ahead, we note that the luminous elements of the tabletop look very beautiful, but this solution cannot be called practical. The fact is that the glow must be viewed in the dark, and if you stay in it for a long time dark room bright elements cause eye fatigue. Thus, an epoxy resin table with lighting will find its use in creating a special atmosphere in the room. You can demonstrate a masterpiece to amazed guests or find relaxation by watching the play of light, but in all these cases, time is limited. Thus, the scope of application of the backlight has been determined.

In fact, guided by the basic principle of the new movement, designers have developed many projects that are simply impossible to imagine. However, every potential owner of such a wonderful table must imagine all the variety of options, so we will try to fill the reader’s imagination as much as possible so that he himself becomes the designer of his future order.

All epoxy tables, in which illuminated elements are found, can be divided into two groups. The criterion for separation is determined by the nature of light.

1. The first group includes products in which the resin contains a special powder - phosphor. As is known, luminescence produces a glow when excitation energy is converted. There are several types of luminescence. In particular, a substance can release light energy after irradiation ultraviolet rays, as a result of the flow chemical reaction, as a result of transmission electric current or electron bombardment. Practical application in the field of construction has been found by photoluminescence, that is, the phosphor in question is exposed to natural light itself subsequently becomes a source of light.
2. The second group is represented by products with electric lighting; these can be incandescent lamps or LED sources. One of the features of epoxy resin is its dielectric properties. All elements of the electrical circuit can be filled with the composition, and they will be reliably insulated. LED elements have low power, so the power source is often embedded in resin along with the backlight. Such options are considered “disposable”. Indeed, it is not possible to replace the power supply or LED. More reliable models contain a current converter and are connected to a 220 V network.

Several options

Let us remind you once again that the total number design solutions with illumination there are hundreds, so it is impossible to describe all the variety. Considering that a number of models are created using fundamentally similar technologies, we will present the most popular examples of countertop design.

From the presented master class, you will learn how to make a luminous table yourself, which furniture stores costs a lot of money, and thanks to this information you can do it in just a few minutes mere pennies. Today, it is becoming increasingly fashionable to make furniture with your own hands, as well as various interior delights, that is, people are looking for uniqueness in the things that surround them, some need it for self-realization and gaining self-confidence, while others just love doing this business .

And so, to make a luminous table, you will need old boards eaten by bark beetles. It is the old and rotten ones, eaten by worms and other bugs, that are needed in order to fill these cavities with a special luminous solution. Now let's take a closer look at everything and figure out what the author needed.

Materials

1. board (old and eaten by bark beetle)
2. epoxy resin
3. metal legs
4. metal plate 2 pcs
5. wood glue
6. nuts
7. bolts

Tools

1. jigsaw
2. drill
3. brush
4. clamp
5. ruler
6. screwdriver
7. container for mixing components

The process of creating a glowing table.

And since it was already said above, the author took old and rotten boards eaten by pests, it is clear that he did not buy them on the construction market 😉 The master went over the boards thoroughly with a plane and coarse sandpaper. Then the author selected and sawed the boards he needed to size so that they were the same size.
The resulting boards should then be combined into a single tabletop; the craftsman performs this action as follows: he coats the side parts of the boards with wood glue, and then tightens them with clamps and leaves them to dry.
Then, after the countertop has dried and is ready, it should be blown compressed air, namely all the cracks and wormholes, so that there is no dust left in them and possible pests.
Afterwards, you should go over the surface with sandpaper; you need to do everything extremely carefully, because the board is very delicate. And so the surface of the tabletop is prepared and it’s time to prepare the luminous solution and fill the cavities of the table with it.

Preparation of the solution: for this you will need epoxy resin, hardener and phosphor powder, it will glow. Everyone chooses the proportions of the mixture themselves; you can check the glow in the following way: give a bright flash to the mixture and turn off the light to see how the solution glows. Next, the author fills the cavities, having previously placed them under the tabletop wax paper, because the moves can be through.
After completing this operation, the master left the tabletop to dry. And then I processed the edge of the table with a hand router.
Due to the fact that the board is rather weak in terms of density and integrity, the author screws these nuts onto the back of the tabletop.
Misses glue metal plate and glues it.
And in this way he screws the legs to the table. Well, the table itself is ready.
Such a table will fit into any even the most sophisticated and expensive interior, and the cost of this table itself is absolutely cheap, but in stores such tables cost about $1000, can you imagine 😉 So, take note of this material, and so as not to lose touch with us and our website join our group

We all know very well that shawls, termites, bark beetles and other “lovers” of wooden food are one of the main destroyers of roofs, furniture, wooden floors etc.

If found the right approach to the damaged material and process it a little, then you can get an excellent original luminous table, which, for example, on some sites costs about 780-800 dollars. So let's get started.

1. To make such a table, try to choose boards that are most damaged by bark beetles. But, most importantly, do not forget to treat all material with chemical or heat treatment. Otherwise, the bugs will not stop and will continue to do their gnawing business. Fig.1

2. After this, plan the board on all sides. And then cut the pieces. Which will be equal to the length of the table. Rice. 2

3. If you want to get a wide tabletop, then here you will have to join several boards together. This procedure is performed using wood glue and tenons. The glue must be applied along the entire length of the board. Once you have done this, tighten the boards with clamps and let them dry. Rice. 3

4. All passages along which the woodworms moved must be treated by removing dust and rot (for this it is recommended to simply blow it out with compressed air). Rice. 4

5. Next, you need to sand the surface of the countertop itself to such a state that it is smooth and even.
6. Next stage– This is preparing the countertop for pouring with epoxy resin. Be sure to place wax paper under the bottom side of the tabletop itself, and make a special plexiglass side on the sides. This procedure is mandatory, since bugs can make through passages.

7. Next you need to prepare the resin for pouring. To do this, it is tedious to measure out a certain amount of resin and hardener. You need to add phosphor powder to the epoxy resin (it is what provides the glow in the dark). As for the amount of phosphor itself, there are no certain proportions. You have to guess, so to speak. After the resin and phosphor have already been mixed, you need to apply a flash to the resin, and then dark room look at the luminescence density itself. If you like everything and it fits, add hardener. Rice. 5

8. Now fill all the holes with epoxy resin. Due to its viscosity, it will not spread on the table, so it is recommended to level it with a ruler immediately after pouring.

9. Even after the resin has hardened, in any case, irregularities will remain on the surface. To do this, simply sand all defects thoroughly. Initially, use coarse sandpaper, and then move on to fine grain (somewhere from 80 to 400).
10. It is best to process the edge of the table with a hand router. Rice. 6

11. Well, the most crucial moment is finishing your table. Open the tabletop with varnish, and when it dries, sand it with fine sandpaper (1200 grit). This procedure needs to be carried out a couple of times so that the table shines well.

12. Due to the fact that the wood used is damaged and rotten, so that the legs are securely fastened, we use sheet material. To do this you need with reverse side tabletops, drill special holes for the nuts, then apply glue to the plates and glue them to the tabletop. Rice. 7

Return