Working with ceramic tiles or artificial stone unthinkable without a tile cutter. As technology improved, so did the tools designed to cut ceramics. If initially devices similar to larger roller glass cutters and pliers were used, then later the cutting process was improved and partially mechanized. This is how manual mechanical tile cutters and electric tile cutters appeared.

Manual mechanical tile cutter - universal tool, equally successfully used in work by both professionals and amateurs. Choosing a manual tile cutter is the key to successful work.

What is this article about?

Tile cutter device

All manual tile cutters are designed in the same way. Before choosing a tile cutter, make sure it has:

Bed (base) - made of stamped sheet metal(cheap models) or cast aluminum (magnesium, titanium) alloy. The base can vary in length - from 400 to 1000 or more mm. The length of the base determines the size of the tiles that you can cut using the device. Professionals always recommend purchasing tile cutters as much as possible. big size(along the length of the bed), which the model you choose allows. This will save you from having to purchase additional tool or limit your design projects to tiles certain size, which can be cut on your existing tile cutter.

Guides - initially, the designs of tile cutters included two parallel guides running parallel to the long side of the frame, along which the carriage with the cutting element moves. But, in Lately appeared a large number of models that have one guide made of reinforced metal profile. These models, due to a misunderstanding, for some reason began to be called “professional”, although any professional tiler will say without hesitation: The monorail is less convenient to use, since it does not allow the roller to be accurately positioned above the cutting line. You have to tilt your head and look from the side, which, of course, is uncomfortable. No professional will work with a tool that initially contains such a defect.

Each type of guide has its own advantages and disadvantages.

The disadvantages of two guides made of polished tubes may include their lack of rigidity (this is a problem with Chinese-made manual tile cutters) and poor sliding of the carriage along the guides as a result of construction dust. You have to take very good care of the guides and periodically lubricate them during operation.

Monorails usually do not have this disadvantage. The carriage with the cutting roller moves along the monorail on bearings. This makes the cut easier and smoother. But bearings should also be carefully looked after.

The cutting roller is the main element that characterizes the quality of the cut and the service life of the tool without replacing the part. In all manual models cutting rollers are replaceable. They can have different diameters and mounting hole. Be made on a rolling or sliding bearing - it all depends on the class of the tool.

The cost of a high-quality cutting roller can reach 1/3 of the cost of the entire tile cutter, therefore, you should treat this working part of the tool with care and avoid impacts or strong mechanical influences (do not forget to tilt the roller when breaking a tile).

Order tile cutters and 1000 more necessary little things available on the website http://diammarket.ru.

Lever

The length and strength of the handle is no less important than the quality of the guides. The main requirement for it is sufficient rigidity so that when the tile breaks, it does not spring or bend. The presence of a pad on the handle is also important. The pad in the form of a ball made of hard plastic (the domain of the “Chinese” cutters) is uncomfortable to grip and, during large volumes of tiling work, can rub a callus on the palm. Pads made of soft rubber-like polymers are more comfortable and less dangerous, but you should avoid buying tools with complex “anatomical” handles. A fingerboard with grooves is usually inconvenient because it forces you to adjust to the size of the instrument. Everyone has hands different sizes. That's why the best option is the smooth handle of their soft polymer.

Marking rulers

Cheap models usually have only a primitive, very inaccurate millimeter scale printed on one of the end sides tile cutter Quite often, the cutting roller does not coincide with the central mark on such a scale, and the scale itself is fixed on the frame and does not allow it to be adjusted after replacing the cutting roller.

More advanced models, in addition to the ability to adjust the scale after replacing the cutting roller, have a solid arsenal of additional rulers that allow you to very accurately set the dimensions of the cut tiles and adjust the cutting angle in the vertical and horizontal planes. This greatly simplifies the work and you should never neglect the presence of these devices.

Ballerina

In most cases, equipping a manual tile cutter with a “ballerina” for cutting round holes in ceramic tiles is nothing more than marketing ploy, designed by adding an option to hide the low quality of the instrument as a whole. “Ballerinas” are used very rarely. The quality of the cutters leaves much to be desired; they are enough to cut 3-5 holes. After this, the cutter needs to be replaced, and it is difficult to find this cutting replacement element, unlike cutting rollers.

It is much more efficient to use an electric drill with a drill bit. ceramic tiles.

Models of tile cutters

The entire variety of models of manual tile cutters available for sale is divided into:

• household (amateur);
• professional.

A professional manual tile cutter is more reliable. A good manual tile cutter can withstand heavy loads, fails less often and is usually more convenient to use. These advantages come at a price. The difference in price between an amateur and a “pro” model with similar characteristics in terms of the size of the cut tiles can reach 15-20 times the size. You should focus on the rating of manual tile cutters.

Therefore, when purchasing a tile cutter, you should soberly assess the volume of work for which it will be designed and the size of the ceramic tiles with which you will have to work.

You should choose a tile cutter of the largest size according to the length of the bed only if you decide to lay it yourself floor tiles made of porcelain stoneware about 20 mm thick. In all other cases, it will be enough to purchase a tool that will be 30% longer than the length of the tile you are going to work with. This margin will provide the ability to cut the tiles at an angle or diagonally.

Professional models

"Sigma"

Italian professional tile cutters "Sigma" are considered one of the best available for sale on the market. Russian market construction tools.

They have a classic design with two tubular guides along which the carriage moves on bearings. This ensures a very smooth operation during cutting.

The tile cutter has a ruler with a guide that can be installed either on the left or on the right. The base is spring-loaded, which is convenient when working with ceramic tiles of small thickness (less than 8 mm). The minimum distance from the edge of the tile that can be cut using a tile cutter is only 8 mm - a result not achievable for other models!

Another convenient feature is the ability to adjust the movement of the carriage “from you” or “towards you” - depending on the master’s habits.

The maximum thickness of the cut tiles is 20 mm.

RUBI

The Italian company of the Boada brothers – “Germans Boada” S.A. RUBI has been producing tile cutters since 1951. RUBI tile cutters have tools for both professionals and amateurs. Accordingly, their prices vary. The only thing that remains is the high quality and reliability of the tool.

Top models of RUBI tile cutters, for example model TX-900-N 17971, have:

• Powerful cast frame;
• Chromed hard guides;
• Replaceable cutting rollers d-8 and 18 mm for cutting thin ceramic tiles and porcelain stoneware;
• Additional rulers and guides that allow you to adjust the cutting width and angle;
• Adjustable cutting depth;
• Adjustable depth of lowering of the lever legs when breaking tiles;
• Tile thickness up to 20 mm, tile length – up to 750 mm;
• The tile cutters are supplied with a plastic case for easy transportation and storage.

VARANGIAN

The professional monorail tile cutter has a reinforced design.

It is equipped with:

• A carriage sliding on a monorail on bearings;
• Spring-loaded work table base;
• Rotating ruler with quick fixation at any angle;
• Replaceable breaker jaws for working with tiles of various thicknesses.

The replaceable roller d-22 mm is made of tungsten carbide and is not inferior in hardness to synthetic diamonds. It has a titanium coating that ensures soft gliding on the surface without squeaking.

The maximum thickness of the cut tiles is 20 mm.

Supplied with a plastic case.

BIBER

The German origin of the Biber brand, which began producing hand-held measuring and construction tools back in 1949, would allow one to hope for the high quality of the tools produced. But... Unfortunately, the transfer of significant production volumes to factories in South-East Asia(mainly in China), they completely killed this brand. In addition, more than 90% of products are counterfeit.

Original BIBER tile cutters are designed for professional use They have reliable design, a carriage on bearings, a replaceable carbide cutting roller d-22 mm, an external graduated rotary ruler that allows you to cut tiles at any angle.

Cuts tiles and porcelain stoneware up to 15 mm thick.

DIAM

Despite the Latin spelling, the DIAM brand is Russian. But production is localized in Italy. That is why it is of high quality, and the tool is classified as “professional” and is popular for its high reliability.

DIAM tile cutters have components characteristic of professional equipment:

• Cast frame made of high-strength aluminum alloy;
• Hard chrome plated all-metal guides;
• Spring loaded work table;
• Extension rulers and stops, fixed at different angles;
• Replaceable carbide cutting rollers d-22 mm;
• The maximum thickness of the cut tiles is 20 mm. Length – up to 750 mm;
• Supplied with a plastic case.

There are no clear instructions on how to choose a manual tile cutter. How many masters - so many opinions. But there are a lot of recommendations regarding the choice hand tools for working at home. When laying tiles, the plastered wall gradually acquires a completely the new kind. The master can feel like an artist creating a masterpiece. The drive from the work lasts as long as the tiles lie on the wall in their entirety. Once it comes to cutting, the difficulties begin. This may be due to a poor-quality tile cutting tool. Today the choice of tile cutters is huge. But you need to know a few rules for choosing a tool so that your work brings joy. Experienced craftsmen can recommend ways to select devices, but each of them judges subjectively. So it's best to find out general recommendations and choose a tool based on them.

A manual tile cutter must have a high strength bearing part, and the guides and lever must be made of durable steel.

First of all, pay attention to the bed. The supporting part of the entire structure must be highly durable. Judge for yourself: you put effort into cutting and breaking the tiles. The base of the tile cutter serves as a shock absorber, so it is constantly exposed to loads. A weak structure can very quickly become deformed or begin to rattle (the result of vibration). It is impossible to work with such a tool, since the main part of the tile will go to waste, and the work will not bring joy.

Your choice should be made in favor of a tile cutter with guides and a lever made of high-quality steel. These elements must also be durable. It is important to pay attention to the method of fastening the cutting element (usually a roller made of carbide steel). How simpler design fastening, the easier it will be to replace the roller. There is no point in sharpening it, so you should think about the upcoming replacement in advance.

What should be the stroke of the cutting element?

Next important point– length of the maximum possible stroke of the cutting element. You should not try to save money and purchase a tile cutter with a short base. Typically, such tools have a number of significant disadvantages:

• the edges of the tiles do not cut through 3-7 mm;
• to Work with non-standard sizes tiles are impossible, especially if they significantly exceed the size of the tile cutter blade;
• all the additional “bonuses” of a short-length tile cutter are nothing more than a cheap fake.

They will try to convince you that the shortcomings can be easily eliminated. For example, uncut edges can be processed with a grinder. At the same time, it is hushed up that the amount of dust released during such cutting is very large. For new buildings this is not a problem, but when renovating a residential apartment, you should not use an angle grinder for cutting. Otherwise, it’s better to think about how to choose an electric tile cutter: when using it, there will be less dust.

High-quality work on cutting tiles can only be done with a long tile cutter. Is it worth saving, think for yourself.

The tile cutter model must be checked for cutting quality before purchasing. It is at this point that you can see some of the shortcomings of the tool, if any, and notice positive sides operation of the purchased item.

additional characteristics

The design features of the tool also have great importance. A high-quality tile cutter is provided with bearings. If for a cutting roller we take the presence of bearings for granted, then their presence to facilitate movement along the guides should be taken as a concern for you personally. The manufacturer made sure that all work was carried out without special effort. Distinctive feature high-quality tile cutter - the ability to adjust the tool for cutting tiles of different thicknesses.

Not only the clamp is adjustable, but also the immersion depth of the roller. This “bonus” is simply irreplaceable in some cases: tiles burned during firing easily crumble, so it will require minimal immersion of the roller. It is better to cut such tiles in several passes, each time increasing the recess of the roller for a high-quality cut.

Tile cutters with a rotating bridge should also be considered the most popular and used. Such models allow you to easily cut tiles in any direction, which is very convenient when laying mosaics or original laying of regular tiles. For the home, such a tile cutter should be considered optimal.

When choosing a tile cutter, you should not purchase a tool with maximum number"bells and whistles". When choosing a quality tool, you should not follow advertising, which sometimes imposes unnecessary devices that significantly increase the cost of the purchase, but in reality are completely unnecessary.

Buy any tool from a trusted manufacturer that has proven itself with the best side and has been working in this field for many years. Large construction companies They never skimp on this. Quality tool with long-term service it will give many positive aspects and help to complete the work efficiently and beautifully.

Element cladding building structures When repairing or constructing buildings, it involves a large amount of work with tile material. In this case, it becomes necessary to adjust the dimensions of the tiles when laying them on surfaces with a complex geometric configuration. To do this, the tiles are cut along the desired contour.

There are many tools and devices for solving this task, but the most effective are tile cutters specially designed for such work. These structurally simple tools provide high-quality separation tile material to give it the desired shape. Which one should you choose?

A tile cutter of this design has advanced capabilities

Choosing the type of tile cutter: electric or manual?

There will be a tile cutter an indispensable assistant at large volume works on laying brooms, tiles and other tile materials. When using this tool, work is significantly faster, high-quality cuts are obtained, and material waste is minimal. There are a wide variety of models on the market similar devices, differing in size and cost, so for the right choice it is necessary to understand the nuances of their functioning.

Based on their design features, tile cutters are divided into two: large groups: electric motor driven and manual mechanical. In devices of the first type, they use cutting disc diamond-coated, driven by energy electric current. In the second case, the cutting element moves along the guide slide using muscle force.

Electric tile cutters are widely used in construction organizations, stone processing workshops, in the production of products on an industrial scale. Power hand tools are most often used when performing home repair work. Owners of private houses make it easier to lay tiles and metlakh tiles.

Replacement cutting roller for manual tile cutter

Tiles from ceramic material You can also saw with a grinder or even cut with a glass cutter. Strengthened on grinding machine diamond-coated disc, you can, of course, process tile material by cutting, but in environment Clouds of fine dust, very harmful to the respiratory system, will be released. Such work is accompanied by terrifying noise.

The cutting roller of a glass cutter does not always cope well with dividing the tile material into fragments; when using it, a lot of waste is formed. It should be noted that this tool is not affected by dense slabs, which are laid on the floor of the kitchen hallway or corridor.

Manual tile cutter selection options

A manual tile cutter structurally consists of a cutting element on a movable base and a device for measuring angles. The cutter is the basis of the working part of this tool; with its help, a cutting line is drawn, when tapped, the tile is divided into fragments of the required size. If the cutter configuration is a circle, then it can make a circular cut.

The presence of a “ballerina” makes it possible to cut holes for socket boxes

Slight angle cuts can be made using a ruler on a rotating mechanism. Besides, famous manufacturers they supply their products with a variety of such tools additional functions, allowing you to protect the edge of the cut slab from coloring, set cutting angles with increased accuracy, and so on.

Distinguish the following types manual tile cutters:

• Using rotating rollers as a cutting mechanism. In their manufacture, especially strong metal alloys are used. Such tools have found the most widespread use.
• Having a mechanical carriage in the cutting unit increased rigidity. With their help, you can carefully process thick and durable slabs.
• Bearings used in the chassis design. Such tile cutters are indispensable when working with high-strength materials up to one and a half centimeters thick.

The required model is selected depending on the expected volume facing works. You don’t need to focus solely on the cost of the tool; you need to take into account its technical characteristics and functionality.

The presence of a manual stop with rotating mechanism allows you to cut tiles at an angle

The selection criteria are as follows:

• The mechanism must have a very strong frame. This design element provides long term tool service, especially when permanent job with materials of increased hardness. Jamming in the system of handles and levers is unacceptable; they must move easily and effortlessly.
• An important operational parameter is the cutting length of the tile material provided by the machine. This value can vary from ten to seventy-five centimeters. Machines with cutting lengths that are too short are often simply useless for getting the job done.
• Good smooth movement of the cutting element along the surface of the plate being processed is achieved by installing a bearing in the running gear of the mechanism. Machines of this design are often used by professional tilers.

Electrical Tool Evaluation Criteria

Machines with cutting parts driven by an electric motor are used to perform a large volume of facing work. Their use can significantly reduce waste. The cutting surface is clean and smooth, increasing the speed of operations and labor productivity.

The most affordable portable electric tile cutter

For the proper functioning of these units, their design provides for water or air system cooling. It allows the tile material not to overheat, otherwise it may crack or split. Cooling water is located in a tank, from which it is directed, if necessary, to the surface to be treated. It is preferable to use this type of cooling system, as it is more efficient. Electrical machines performed in stationary and mobile versions.

Portable tile cutters are much lighter and can be easily moved if needed to be used in another location, however functionality stationary units have much more.

They can be used for cutting slabs of considerable length, since dimensions similar devices allow this. In terms of price-quality ratio, machines with electric drive are the most optimal tool for cutting tile material. With their help, you can perform a variety of work with high quality and speed. You should not look for a unit that is too cheap; saving is inappropriate here.
The simplest version of a desktop electric tile cutter

• Build quality must be assessed when visual inspection unit. There should be no visible defects on its structural elements, and when the engine starts, vibration of the machine should be minimal. The smaller it is, the better the result of tile cutting will be.
• An important operational parameter is the power of the electric motor. The larger it is, the better the device will cope with increased loads during the work process, and the longer it will last. Good indicator The power value is considered to be eight hundred watts or more. The output shaft of such electric motors rotates at a speed of eleven thousand revolutions per minute.
• Machines with bottom-mounted engines take up less usable space. Units with a motor located on top cut tiles more accurately.
• The characteristics of the depth and length of cut of electric machines are good. The best specimens are capable of processing slabsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
• The availability of spare parts for repairs must also be taken into account. Details service You need to find out from specialists at repair shops.
• The working disk should not differ in size from standard values. Most often, its diameter is eighteen centimeters.

The functionality of electric tile cutters significantly exceeds the parameters of manual machines. Professionals value this tool for its high speed of processing tile material. The cutting time is several tens of seconds.

Tile cutters of famous brands

Long service life and excellent performance qualities Tile cutters differ from the following well-known brands:

• “Sigma” belongs to the professional class of tools for cutting tile material. The cutting part moves on bearings along tube-shaped slides, which ensures uniform force exerted on the cutting strip. The thickness limit for the processed tiles is two centimeters.
  Tile cutter Sigma Series 3 Klick Klock 3D2K

  The outstanding characteristic is minimum distance eight millimeters from the edge of the slab, at which you can begin work. Available Italian producers and is widely popular in the domestic construction market.

• “RUBI” - an Italian model has been produced since the middle of the last century and during this time has gained a reputation as a tool with unconditional reliability and quality. Professional versions are equipped with an extremely durable casting frame, many adjustments and settings that allow you to very precisely select the angular direction and depth of cut.
  Tile cutter RUBI TR-600-S

  Depending on the thickness of the slab, the roller cutting elements of the tile cutter can be replaced. The length available for processing is seven and a half centimeters. The units are stored and transported in convenient plastic cases.

• "VARYAG" - domestic production The device is distinguished by a design of reinforced strength. In the manufacture of the roller cutting element, tungsten alloys are used, so it has a truly unique hardness.
  Tile cutter Varyag-55133

  The unpleasant creaking sound is eliminated using titanium coating. Bearings are used in the design of the chassis; the carriage moves along one guide.

• “Biber” - the legendary German quality of this brand is greatly spoiled by the release of counterfeit Chinese products. The original tile cutters of this brand will not disappoint professional tilers; they are distinguished by their long service life, simplicity and reliability of design. They effectively cut slabs of increased hardness from porcelain stoneware and are equipped with high-precision settings.

  
  Tile cutter BIBER Supreme-55111

• “DIAM” - machines of this brand are domestic, but their production is organized at Italian enterprises, so they are distinguished by their unconditional quality and reliability in operation. The units are professional equipment and are equipped with a powerful cast frame, roller cutting elements, made of especially strong alloys, with precise measuring devices. It is possible to process tile material up to two centimeters thick and up to seven and a half centimeters long.

Electric tile cutter DIAM ML-1200/1.8

The choice of a tile cutter model for performing a specific type of facing work is determined by the characteristics of its operation. The high-speed electric tile cutter is used for professional use when laying a significant volume of tile material.

For home repairs carried out on your own, a machine with a manual mechanical drive is quite suitable. Which unit is better can be determined by conducting a comparative analysis of their technical characteristics. In this regard, it is useful to familiarize yourself with the experience of using several tools using the following video.

When laying tiles, you need to cut them. There are many ways to do this - from scratching a furrow with a Pobedit drill or glass cutter, to using stationary industrial equipment.

The choice of type of tile cutter depends on the volume of work and material (tiles, ceramics, marble, porcelain stoneware). The tile cutter can be manual or electric, compact or stationary.

You pay your money for speed and ease of use. We will help you make a choice and tell you which options make sense to spend money on.

How to choose a manual tile cutter?

The tool involves the use of muscular force. The performance is not so high, but you can save money when purchasing.

Let's look at the basic device:

1. Base. The frame must be strong, not bend diagonally and not sag along its length. The main parameter is the length of the desktop. For wall tiles 40 cm is enough.
2. Brackets for fixing guides. They must withstand the main load when the carriage moves.
3. Guides. The carriage slides along them. Made in the form steel pipes. The thickness of the pipe walls must be sufficient so as not to sag when the carriage moves.
4. Carriage. Made in the form of two bushings and a hinge mechanism. It is advisable to purchase a design with bearings in bushings that ensure smooth movement. This is the main indicator of the quality of work. If the carriage jams, you will ruin the tile.
5. Hinge mechanism. There should be no backlash. It is desirable that the axle be collapsible, in the form of a bolt. In this case, it is possible to adjust the tightening and dismantle for maintenance. A cutting roller is located on the moving part of the carriage (thrust rod).

Personal experience work with various types tile cutters - video


6. Thrust bar. The cutting roller is rigidly fixed to it and the separator foot is hinged. The roller can be installed stationary (on a fixed axis) or on a movable guide. The second option is preferable because it involves changing the roller when cutting various materials.
7. Reference angle. Located on the axis of movement of the roller. The tile rests on it while cutting the furrow. When separating halves, the angle is the axis of the tile break.
8. Separator foot. Designed to create symmetrical pressure on the tile halves when breaking along the reference angle. Hingedly suspended on a thrust rod. When cutting, it does not put pressure on the tile. Then the bar is raised and the foot is brought into working position. When pressed sharply, the foot gently breaks the tile along the line of the reference angle.
9. Lever arm. With its help, pressure is applied when cutting the furrow and breaking the tile with a foot.
10. Microporous rubber backing. When applying a groove, the backing holds the tile in a horizontal position. During a fracture along the edge of the reference angle, the substrate is dented.
11. Working emphasis. With its help, the tile is held strictly along the axis of the cut.

Choosing a manual tile cutter comes down to checking the quality of the tool and the availability of additional options.

Let's take a closer look at the options:

If the rod with the roller can be dismantled, this gives additional features.


Having a set of rollers of different hardness and diameter will make it easier for you to cut tiles from different materials. The replaceable roller is easier to replace when worn.

Ceramic tiles have now become one of the main finishing materials. And this is quite understandable and understandable: it has a huge number of advantages.

However, in order to lay the tiles correctly and efficiently, the master must have at hand necessary tool and devices. Such tools undoubtedly include the tile cutter, the abundance of models of which sometimes plunges users into the deepest confusion. Which tile cutter to choose, how to choose a tile cutter - these are the questions asked by almost everyone who has decided to start laying tiles.

Our article today will help you find answers to these questions, in which we intend to talk both about the parameters for choosing tile cutters and about the main models and brands that are of legitimate interest.

Basic parameters that determine the choice of tile cutter

Thinking about how to choose an inexpensive but good tile cutter, and going to the store, you should imagine at least general outline the design of this rather simple, but very important tool during operation. This picture will certainly help you with this:

When choosing a specific model, main attention should be paid to the following parameters:

Frame strength

The best manual tile cutter is one that has a strong and reliable frame. This is what guarantees the durability of this tool. Signs indicating the reliability of the product include, in particular:

• the thickness of the metal used in the frame. Insufficient thickness often causes vibrations and, as a consequence, causes the tiles to split;
• the strength of the working handle, since it is this element that allows you to apply the necessary force, which is especially important in cases where work is carried out with porcelain stoneware products.

Tool length

To an uninitiated person it may seem that length in no way affects the choice of a manual tile cutter. However, it is not. It is not worth buying a tool that is too short to save money. By overpaying quite a bit, you can become the owner of a universal tile cutter that can even work with floor tiles.

If you watch quite a few videos on the Internet on how to choose a manual tile cutter, you will understand that a large-sized tool can open up additional opportunities for you. So, with its help you can, for example, cut tiles diagonally using the diagonal laying method.

Smooth ride

Almost all high-quality tile cutters have special bearings that provide smooth operation, which is important for operation. If your choice falls on a device without bearings, do everything to test it in operation. If this is not possible, the key to trust in a tool can be the recognition of its brand.

Some additional information to help you understand which tile cutter is better

In this question of how to choose a manual tile cutter, user reviews will, of course, help you. However, knowledge of some of the nuances characteristic of these devices may be useful for you. Such nuances, in particular, include the following:

• The cutting roller of a tile cutter, made of hard steel, naturally becomes dull over time. It cannot be sharpened, it can only be replaced;
• an additional advantage is the presence of a rotating ruler in the tool, which allows making cuts at an angle;
• availability of additional settings that take into account the thickness of the material and improve the quality of cutting. However, such settings are present only in devices belonging to the most expensive price categories.

Best tile cutter: brand rating

How to choose a tile cutter - numerous videos that are available on the Internet will help you in this matter. We hope that our article will help you decide which tile cutter to buy for your home. In this regard, some benefit can be derived from the description of the most popular models and brands, which we now intend to present to you. The rating we provide is valuable because it is based on the latest user reviews collected in 2018.

RUBI

This brand is Spanish, but the bulk of the instruments of this brand are produced by enterprises in China. The most famous and respected models of this brand include the STAR-60-N - a manual tile cutter that is classified as a professional one. Experts especially appreciate the characteristic features of this instrument. highest quality manufacturing. The inherent excellent rigidity of the structure - both the guides and the base - allows for a perfectly even cut made by the cutting attachment strictly along the marking line.

The tool has a length of 610 mm and is capable of working with both porcelain stoneware and tiles 430×430 mm.

The only parameter of this tile cutter that can be attributed to its disadvantages is its relatively high price. However, this does not frighten craftsmen who are professionally involved in laying tiles, since having this tool and possessing good experience, they are always able to perform guaranteed quality work.

As you know, the ZUBR brand is a popular Russian brand, under which a large number of different construction tools are produced. The most respected among the tile cutters produced within this brand is EXPERT 33195-60. This device is capable of accurately cutting tiles of varying hardness, up to porcelain stoneware. The limiting parameters of the products processed by it are:

• width – 600 mm;
• thickness – 30 mm.

The mechanism, which is resistant to physical impact and weighs 5 kg, includes a very hard cutting roller that can maintain its performance for quite a long time. With all due respect to the advantages of this tile cutter, experts recommend that when purchasing it, make sure that there is no play in the roller, which can negatively affect the quality of the cuts it makes.

VIRA

The VIRA brand has existed on the Russian market since 2004. During this period, he managed to gain a large number of fans and regular customers. Buyers appreciate the products manufactured under this brand for the very good relationship between its quality and the price set for it.

The above fully applies to tools such as VIRA tile cutters. When thinking about which tile cutter is best to choose, many craftsmen give preference to tools of this particular brand. Fortunately, VIRA offers quite a sufficient choice for home craftsmen: using products produced by this manufacturer, you can cut tiles measuring 300 and 400 mm.

When deciding which model to choose a manual tile cutter among STAYER brand products, most buyers give preference to product 3310-48. They are driven to this decision by the versatility of this device and its very affordable price. The length of the cut, like the VIRA tool, is about 400 mm, which in most cases is quite enough. In addition, the tile cutter 3310-48 allows you to process tiles whose thickness can reach 16 mm.

An additional bonus for owners of tile cutters 3310-48 is the presence in them of a special device called a ballerina, which allows cutting into workpieces round holes radius 15÷40 mm.

However, when deciding which tile cutter to choose for your home and leaning towards a STAYER brand product, you should know that there are also significant complaints about them expressed by their owners. The main shortcomings noted are:

• play in the cutting roller;
• insufficient structural rigidity.

Defects noticed by customers can cause a significant deviation from the applied markings during cutting, which ultimately results in scrap and additional expenses for users. For this reason, when buying a STAYER tile cutter, the final choice should be made only after performing a test cut, which allows you to identify possible factory defects.

STURM

When purchasing a manual tile cutter and wondering which one is better within the STURM brand, many home craftsmen ultimately choose the 1072-TS-500-1 model. And this decision of theirs is quite understandable for the following reasons:

• this model is very different affordable price;
• the device is very compact, and its weight does not exceed half a kilogram;
• The design of the tile cutter is very simple and at the same time quite reliable;
• The length of the cut it makes reaches 500 mm.

However, when choosing a manual tile cutter and deciding which one is better, it is still better to start not from such a parameter as its cost. Of course, the 1072-TS-500-1 tool from the STURM brand is attractive for its price, but having purchased this product, you will have to put up with the following significant disadvantages:

• rapid dullness of the cutting element;

inability of the tile cutter to cut thick ceramic tiles.

Return