Correct and reliable fastening of building materials guarantees the durability of structures. Because a construction stapler is an indispensable tool during repairs. It is used for:
- wiring fastening;
- fastening the carpet to the floor;
- reupholstering furniture;
- installation of waterproofing materials.
A separate tool is selected for each thickness and type of material. In our article we will talk about the types of tackers and how to choose a construction stapler.
Types of construction stapler
Before you start choosing, you need to familiarize yourself with the main types of tools. Construction staplers are:
- mechanical;
- electrical;
- pneumatic.
For a small amount of work mechanical tool will be the most profitable. Its advantages:
- relatively low cost;
- simple operation scheme;
- reliability - there is simply nothing to break;
It consists of a housing, a spring and a lever. Powered by the user's muscle power. Naturally, when attaching waterproofing or reupholstering furniture, such a tool becomes very tiring. In addition, the productivity of work with it is not too high.
An electric stapler increases the speed of work. No physical strength is required to use it. The bracket is driven in using electrical energy. It can penetrate denser material. The disadvantage is that this type of stapler is dependent on a power source.
If you choose a product with a cord, it can be inconvenient to use. The cable gets tangled, interfering with work. It is impossible for them to work in an open area. Battery-powered products require constant recharging, and powerful models cost a lot.
The pneumatic stapler is the fastest and more suitable for industrial volumes. The staple is driven in by force compressed air. This also leads to a drawback - a compressor is needed. Therefore, purchasing the entire set of equipment for home is expensive and pointless.
Choosing a stapler according to the type of work
A cable stapler is used to secure the wires. It is distinguished by the special shape of the staples. It is capable of fastening products with a diameter of 4.5 to 7.5 mm. They are often used:
- electricians;
- Internet providers;
- telephone line installers.
The hammer tackle is useful where speed is needed. Its disadvantage is low accuracy, but this is not necessary when:
- fastening waterproofing;
- installation of roofing carpet;
- laying underlay for floor coverings.
The principle of operation is to strike the surface with a stapler. The staple enters the base due to the force of inertia.
The packaging stapler is used for fastening cardboard products and thick paper. It is used as a replacement for scotch tape. Mechanical and pneumatic products are produced. The window stapler is not filled with ordinary staples, but with metal pins. Depending on the energy compressing the spring, the length of the driven product can be from 1.5 to 5 cm. A tool for corner brackets is rarely used. Often in production decorative items and reupholstering furniture. This stapler fastens products at a certain angle.
Convenience at work
The main part in the device under consideration is the impact mechanism. The main loads fall on the spring. The ease of working with a mechanical product depends on its rigidity. The worse the compressibility spring block, the more effort it is worth putting in. With electric models and pneumatics, this indicator is not so important.
Charging with staples is carried out as for a regular office product. The length of the cassette that fits in the stapler matters. The more staples the device holds, the longer the operation without recharging.
The striker is then released and pulls out the staple from the pack. If you run out of staples, you need to load them into a special magazine in the same way as in a regular office stapler.
Models of construction staplers differ from stationery ones. There are two types: in the first, the staples enter completely into the material, in others, the staples are bent thanks to an anvil on the mating part.
High demands are placed on the tool handle. It should be rubberized and with a corrugated surface. This is necessary so that the tool does not slip in your hand. The quality of the handle material matters when working in unheated rooms or on the street. It shouldn't crack.
It is better to select a device with the ability to adjust the impact force. It is more convenient if the adjustment mechanism is located on the handle.
How to choose a construction stapler
Before purchasing a stapler, decide what kind of work it will do. The stapler chosen for daily work must be reliable and convenient. At long work It's better to choose electric. Mechanical models are very tiring and can leave sores on the palm.
On the other hand, before purchasing an electrical device, make sure in advance that there will be a place for connection at the work site. If there is no such place, then look at staplers that run on batteries. This tool weighs slightly more than any other type of stapler. Working with this tool, you will get tired faster. Another disadvantage of this stapler is its short-lived battery. Buy new battery not much cheaper than buying a new instrument.
For work in the workshop, it is best to choose a pneumatic stapler. There will most likely be a connection point for pneumatic tools to supply compressed air. This type of stapler is famous for its safety margin and reliability.
A hammer-shaped tool is suitable for those who work with little precision in driving staples. The cost of such a stapler is small, and it is much more convenient to work with it, since the staples are already inside.
Household furniture stapler – universal tool, with which you can not only secure the upholstery, but also perform many other works in household quickly and accurately. Before choosing a furniture stapler for personal use, it is useful to study information about this device and the recommendations of craftsmen.
Operating principle and advantages of the stapler
The traditional tool of professional furniture makers has found wide application in everyday life. A furniture stapler (stapler, tacker, gun) is designed to perform many operations, which can be divided into two groups:
- Attaching thin material (fabric, film) to a solid base (wood, chipboards or MDF). The bracket is recessed into the base, only the back of the fastener is visible on the surface.
- The connection of two layers of equal thickness. The materials are pierced through, and the edges of the staple are bent.
The principle of operation of the tool is simple. Fastening elements (staples) are loaded into the clip, the working part is installed in place of fixation, and when the trigger or button is pressed, the stapler fires a staple that secures the material.
The list of household jobs for which you can use the device is extensive and varied:
- securing the upholstery to the furniture frame;
- covering surfaces with finishing materials;
- laying insulation, films, carpets;
- construction of film greenhouses and greenhouses on the site;
- fixing glazing beads on windows;
- assembly of packaging boxes and much more.
In the absence of such a unit, a hammer is usually used in the household. However, the advantages of using a furniture stapler are obvious:
- work is done faster and with less physical effort;
- You can support the material being fixed with your free hand - this makes the process easier; one person can handle the job;
- the accuracy of the fastening does not cause springing or mechanical damage to the fastened parts;
- The sharp ends of the staples are inside the tool and cannot cause cuts or injuries.
Types of staplers
There are many varieties and modifications of furniture staplers - they can be divided into 3 groups depending on the design complexity and performance. 
- Manual (mechanical)
The simplest and most mobile type of tool that does not require additional accessories and devices. To perform the operation, you only need to apply physical force. Simplicity of design and the absence of wearable elements are the key to the reliability and durability of such a device. Maintenance consists of periodic lubrication of parts. The service life of hand tools is 6-8 years.
A mechanical furniture stapler is suitable for performing simple household operations. For large volumes of work, using physical strength is tiring, and achieving high labor productivity is impossible. 
- Electric
The device is designed to perform medium-sized work on professional level. The tool requires connection to an electrical outlet. There are modifications that run on a rechargeable battery. The impact mechanism is set in motion by pressing a button; no physical effort is required.
The electric motor increases the impact force several times. This allows you to quickly and easily pierce hard materials, and the fastening has increased strength. One of the subtypes of electric tools is a construction stapler, designed for fastening boards, lining, baseboards and other finishing materials.
The disadvantages of an electric device are its relatively high cost, increased weight due to the motor, and a limited working area by the length of the cord.
Electric models quickly fail due to incorrect selection of brackets or violation of operating rules. For beginners, it is better to first purchase simple and unpretentious mechanical staplers.
- Pneumatic
The most productive, powerful and durable models. To operate such tools, a compressor is required, so they are used in furniture factories, where individual workplaces can be equipped with a compressed air supply and a dedicated power line. Their use is not advisable for home and household needs.
Instead of a spring, the tool is equipped with a pneumatic cylinder. It is driven by air entering when the pedal or trigger is pressed. This constructive solution allows you to increase many times labor and perform large volumes of work. average speed such pistols - 1 staple per second.
Otherwise, the design of pneumatic models is quite simple and does not require complex maintenance. You just need to periodically clean it and replace the O-ring as it wears out. The main disadvantage is stationarity. The range of the device is limited by the length of the air supply hose.
How to choose a stapler?
Depending on the type and volume of planned work, decide on the type of tool: mechanical or electric. Now you can proceed to the selection, focusing on the types of brackets with which each model under consideration is compatible. This information is indicated on the product packaging. The cheapest and simple models usually designed to work with one type of staple. For semi-professional household models, you can use several types of fasteners, including nails and pins.
It is better to choose a more expensive universal stapler, which is useful for many types of household work. The difference in price compared to the simplest models is insignificant, and the scope of application is much wider.
For household tools The following staple sizes are suitable:
| Type | Form | Dimensions (thickness/back width/height range), mm | Features and purpose |
| 53 | U-shaped | 0,7/11,3/4-14 | The most popular and frequently used type. Depending on the height, it is used for paper, cardboard, thin fabrics, and wood. There are 2 types of staples: hardened for hard or laminated wood and simple for thin materials and soft wood. |
| 140 | U-shaped | 1,25/10,6/6-14 | Thick staples for securing thick fabrics to wood and chipboard |
| 28 | S - semicircular | 1,25/4,5/9-11 | Fastening finishing materials |
| 36 | L-semicircular | 1,25/7,6/10-14 | Fixing cables and wires no thicker than 6.4 mm |
| 300 | T-head nails | 1,2/10-14 | Fastening to plywood, chipboard, solid wood |
| 500 | Nails without heads | 1,2/10-14 | To work with various types fabrics and wood |
The general principle for choosing fasteners is: the thicker the materials being joined, the higher the staples should be used.
Stapler for upholstery – which one is better to choose?
Mechanical pistol - optimal choice to reupholster worn or damaged furniture upholstery at home. Physical strength human and mechanical capabilities are quite enough to securely fasten the fabric to the soft wood of the furniture frame. In addition, any adult can use the manual unit, even without experience and skills.
When working with hard wood or daily use, an electric tool is necessary - mechanical models will not be able to provide the required impact force. If you plan to open your own furniture business or workshop, you can think about purchasing high-performance pneumonic equipment.
The advice we have collected from professionals will help you choose the best option among the wide range on sale.
- When buying a furniture stapler, pay attention to the body of the product - it is better that it is made of durable light alloys rather than plastic. Hardware resistant to external mechanical damage, accidental falls and will last much longer than plastic counterparts.
- Give preference to a collapsible rather than a one-piece design. This will allow you to carry out minor repairs if necessary and thus extend the service life of the device.
- The handle of the tool should have an ergonomic shape and fit comfortably in the hand. The rubberized layer prevents the palm from slipping.
- The transparent magazine allows you to control the number of staples and change the clip in time.
- The presence of a stopper to prevent accidental shooting is a mandatory option safe use unit.
- Qualitative hand tool must be equipped with a penetrating force adjustment mechanism in the form of a switch or wheel. With its help, you can adjust the stapler to a certain hardness of the material. If the staple does not fit into the base the first time, you need to gradually turn the adjuster from minimum to maximum until the desired result is achieved. Test shots should be carried out on rough material.
- The presence of a double strike mechanism significantly increases the productivity of a mechanical gun - if after the first strike the staple does not completely enter the material, an additional impulse is applied to it. Choose a manual stapler with an impact mechanism on a leaf spring, which gives almost no recoil.
- An electric tool that is supposed to be used for large-scale work must have high performance, i.e., perform at least 20-30 blows per minute. An important option that determines the mobility and ease of use of a tacker is the length of the cord. When choosing a device with a battery, you need to pay attention to the capacity and charging time of the battery. The speed of work completion directly depends on these indicators.
A furniture stapler is a simple but very useful household tool. For small jobs around the house, mechanical models are usually chosen - they are easy to use and reliable. For large-scale and construction work use electrical appliances that have high power ratings and provide the best performance.
When there is a need to quickly fasten sheets of paper, a stationery stapler is usually used. But with more complex work It is convenient to use a more powerful tool called a tacker. With its help, you can not only reupholster furniture, but also attach carpet to the floor, install wiring, etc. Each job has its own specifics, and therefore requires the use of a certain type of tool.
How to choose a stapler for reupholstering furniture: main varieties
On the market today you can find three main types of staplers for upholstering furniture, among them:
- pneumatic;
- electric;
- mechanical.
The latter variety is an inexpensive classic. Home craftsmen like these tackers. The design has only three nodes:
- spring;
- lever arm;
- frame.
When the operator acts on the lever, the spring mechanism is activated. The spring expands and drives nails or staples. If you want to find such a tool, you should prefer a model with a collapsible body, the elements of which are secured with screws, but not rivets. This, if necessary, allows you to clean the instrument, eliminating minor problems.
If you are faced with the question of how to choose a furniture stapler, then it is important to pay attention to the casing material, which must be durable. When it is made of steel, it is good if it has additional chrome plating, nickel plated or powder coating. But sometimes the case is made of modern light alloy, which is the best solution.
Description of mechanical type
Quite often, consumers decide how to choose a furniture stapler for their home. To get the answer, it is recommended to consider mechanical models. They are low in cost and will be affordable for every consumer. This tool is suitable for small-scale household work. However, if you are upholstering furniture at a professional level, then it is better to consider another type of device, because you won’t be able to work quickly with such a tacker; your hand will get tired from prolonged effort. Experts recommend that professionals consider pneumatic or electric devices.
Description of electric staplers
Before choosing a furniture stapler, you should pay attention to electric models, which are more expensive, but are distinguished by their reliability and speed of work. By pressing the button you will activate the impact mechanism. There is no need to make any special efforts. Even a fragile woman or child can cope with such a task.
Things will go faster if you use such a mechanism, abandoning mechanical version. Yes, and it will be possible to penetrate harder materials, and the joints will be quite strong and reliable. You can understand how to choose the right furniture stapler by looking at networked electric models that have a cord. Sometimes this becomes a real problem, because the cable can limit the area of use. For example, if you are far from the outlet, the wire may not be long enough.
When is the battery type suitable?
However, you can use alternative solution and purchase a cordless stapler. It will be quite heavy, and the operator’s hands will get tired after a while. Any electric model will be much heavier than its mechanical counterpart. Before choosing a furniture stapler, you should take into account that you will have to pay quite a bit for an electric model. high cost. Therefore, if you are purchasing a device for personal needs and will use it from time to time, then it is not recommended to spend so much money on it.
Recommendations on when to purchase a pneumatic stapler
If you need a furniture stapler, how to choose, the price will decide. On average it is 500 rubles. But it is also important to take into account the purpose, as well as operating conditions. For example, a pneumatic stapler is more suitable for stationary use than others. It is quite convenient and operates using air that is under pressure.
Such a tacker performs its task with lightning speed. The pneumatic model weighs much less compared to the electric one. But in this case, there is a catch, expressed in the fact that along with the stapler you will also have to purchase a compressor, paying for it additional funds. This option is best purchased for stationary work. Pneumatic models are purchased for production conditions.
If furniture needs to be upholstered at the factory, then it is better to equip workplace using this option, because the stapler and compressor do not need to be moved anywhere, in addition, pneumatics allow you to carry out work quite quickly, providing excellent results.
Selecting a stapler by manufacturer
Before choosing a furniture stapler, you should also take into account the status of the manufacturer in the market for the relevant products. It is important to pay attention to the purpose and additional features, which are not always needed in everyday life. That is why a number of consumers choose the Piranha X70005 household stapler, which weighs 566 g. The rubber insert has shock-absorbing characteristics, and on the body there is a ring for securing the handle in the lower position.
Another household model is Rapid R453, it weighs less than 356 g, has a shockless lever release mode, and also allows you to fix the handle in the lower position, as in the option described above. Additionally, this stapler has the ability to work with round staples.
But if you need a professional tool, then you should pay attention to the Arrow JT21CM. This model weighs 436 g, but some consumers note one of its disadvantages, which is the not very comfortable handle; it slides off during operation.
Alternative solutions
The Novus J-19 EADHG model will be more convenient, which has a rubberized handle and weighs 1024 g. This professional tool has a multiple impact mode, a safe reloading system and a remote stop. There is a special latch to fix the handle in the lower position, and a plastic hook allows you to hang the tool on your belt if necessary. The Rapid R353 model has an impact-resistant rubber insert on the body; it weighs 886 g, and also has a shock-free release mode, which simplifies operation and makes it more comfortable.
Features of choosing staples
Quite often, home craftsmen and professionals wonder how to choose staples for a furniture stapler. They are the simplest, in this case their depth varies from 4 to 8 mm. Such consumables will not be so expensive. They are intended to fulfill simple work. They can pierce paper and fabric.
You can choose options ranging from up to 10 mm. They are used in semi-professional staplers. Some models use type 140 staples, they are thicker and have a thickness of 1.2 mm. In this case, the width reaches 10.6 mm. You should not purchase type 53 staples for such staplers, since in this case the equipment will shoot 2 staples at once. Therefore, it is important to ask what type of clamp the tool uses.
Semicircular staples are intended for driving in cables. But if you have a stapler from the Stayer company, then you should know that it supports four types of staples: 143, 100, 500 and 36. If you have already decided which furniture stapler to choose, then you should pay attention to consumable material, which can be hardened and is used for laminated wood or strong chipboard. Typically, such consumables cost twice as much as regular ones.
There is a wide variety of different models tool s necessary to simplify life. Stapler one of them. It has been popular for many years.
A furniture stapler is a fairly versatile tool.
There are many modern types. Each of them is intended for certain type works, ranging from simple ones to their use for industrial purposes. Furniture is often used in everyday life stapler
Using it you can not only perform the furniture upholstery procedure, but also a number of other construction operations
The mechanism of the device consists of several important details. Electric models are the most popular. It connects to the mains and you can use it.
This stapler allows you to significantly save effort and time, because the supply of staples is carried out without interruption.
When the shot comes staples and flies out and enters a wooden plane. Passing through the material, it is fixed in the furniture part.
This way you can securely hold the furniture upholstery.
Staple s almost invisible.Only their backs are visible, which look like thin strips of metal. The fabric does not tear, it is firmly fixed in the right place.
The place where the clamping occurs looks neat.
Stapler is convenient tool om, necessary not only for builders. It is great for use in Everyday life. Can be used not only staples, but also nails.
There are several different types stapler ov. Before you buy this product, you need to carefully understand all the varieties.
Knowing the features of all options, you can choose the most suitable one.
Among the types available on the market, the following are distinguished.
Before starting work, it is recommended to thoroughly understand the operation. Mechanical must be adjusted before use. The best option is a rough canvas on which you can perform test shots to fine-tune the equipment.
Change the regulator on the device to get the result you need.
It is necessary to mark the placement in advance staples . This will help ensure the same distance between them. When the shot is fired, be sure to hold the material. Check regularly how much is left in charge stapler.
If the tool is not needed for some time, put it on safety.
Advantages and disadvantages
Any equipment has its advantages and disadvantages.
It is important to note each of them so that you can make the right choice.
To the advantages of mechanical stapler refers to:
- Price;
- he has simple design(this parameter is important, since the simpler the structure tool , the less often it will break);
- Mobility;
- Possibility of safe use.
The disadvantages of this type of equipment include the following factors.
- Working with it requires a lot of physical effort.
- It has low speed.
Mechanical stapler.
The advantages of electric include the following advantages.
- When working with it, you do not need to make any physical effort;
- Has a high operating speed;
- Tool has high power.
Among the disadvantages of this type of equipment are:
- The cost is higher than mechanical;
- An electrical connection is required (because of this, they can only work within a limited radius, it all depends on the length of the wire);
- Heavier than the previous type.
Electric stapler.
To the positive features of pneumatic stapler and should include:
- Work speed at a high level;
- Has great power.
Among the disadvantages of this type of equipment, the following are noted.
- Requires a compressor. This affects cost, weight and dimensions.
- In most cases it is used as a permanent installation.
Pneumatic stapler.
How to choose a quality mechanical stapler?
The mechanical unit is not too different complex design. But it has certain features on which the ease of use directly depends.
- Transparent store. This convenient option, allowing you to control how much is left in the device staples
- Impact force regulator. This allows the equipment to be adjusted depending on how dense the material is. Makes the job much easier.
- The narrow working tip of the device helps ensure accuracy of the shot.
- To ensure safety, there is a stopper on the handles. This will help avoid accidental shooting.
- Handle with rubber base. This will help tool do not slip in your hands. This will make it more convenient to operate the equipment.
The device of a mechanical stapler.
How to choose a quality pneumatic stapler?
First you need to decide on the range of planned actions. From the conditions in which it will be applied tool , quantities consumables and state work surface depends on the parameters that you need to rely on when choosing. For furniture production, universal models are suitable, which maintain a balance of efficiency in performing work and ergonomic qualities.
Super universal stapler Stanley Fatmax TR75.
If you plan to use the unit at home, it is better to choose an entry-level pneumatic model. Such equipment allows targeted activity with small hardware. If you plan to work with textiles, such tool but it will be quite enough.
For plywood you will need a pneumatic nailer.
How to choose staples for a furniture stapler
For the right choice please refer to the instructions that come with the tool u. It is worth considering certain parameters to choose suitable option. The following parameters are important.
Types of stapler staples.
Attention! Some sellers may advise replacing one type of bracket with similar ones. Such recommendations should not be followed. The depth of the models may be the same. However, geometry that is difficult to see with the normal eye may vary. This will eventually cause a breakdown.
Charging the mechanical stapler
With mechanical stapler It's quite simple to work with. You need to know how the charging process works. It involves several steps.
- The unit must be fused.
- The flap at the back of the equipment should be folded down. Behind it there is a groove for staples
- From this area you need to pull out the rod with the spring.
- Staple block should be turned with their backs towards the handle and inserted inside the groove.
- Return the rod to its original position. It is necessary to carry out the clamping staples inside the tool.
- The sash must be slammed shut until you hear a characteristic click.
The charging process is complete and the equipment can be used.
Charging a pneumatic furniture stapler
The pneumatic device differs from other models in its good impact force, high reliability and speed of operation. To use it, you need to additionally take a compressor.
The compressor helps create the required pressure.
This type is not suitable for standard household chores. It is better to use a simpler model.
If you decide to open a construction or furniture company, then such a stapler is quite suitable.
To charge a pneumatic one, you need to do the following.
- The unit is blocked. This will help prevent it from accidentally turning on, so press the button that opens the tray where the staples s. Depending on the model, the tray lid may open or the tray may slide out of the handle.
- Re-check that stapler continues to be on fuse.
- Staple They should be placed in a tray, their legs should be positioned towards you. After installing them, check that they lie level.
- Close the tray.
Working side tool should be turned over to the material.
Unlock and get to work.
To carry out home furniture repairs, a mechanical one is better suited. stapler . For larger projects, it is worth choosing an electric model. When opening own production It is recommended to purchase a pneumatic one. The type should be selected based on the planned type of activity. This is precisely the main parameter.
Refueling the equipment is easy. This can be easily dealt with at home.
It is only important to follow safety precautions. First put the unit on fuse.
VIDEO: Types and use of construction staplers.
VIDEO: How to charge a furniture (construction) stapler.
A stapler invariably makes it onto the list of must-have tools in every home. With its help, you can attach almost any covering to all kinds of surfaces: a furniture stapler works equally well with textiles, plywood, film, and thin plastics. But for a tool to really be useful and last a very long time, it must be chosen correctly. How to do this? What criteria are considered basic when choosing a furniture stapler?
How to choose a furniture stapler? Basic Steps
Before going to the store to buy a stapler, it is recommended to decide on some of its parameters at home. First of all, you should ask yourself these questions:
- Why do you need a stapler? It’s one thing if the tool is needed for making furniture on a conveyor belt, and quite another if the stapler will be used for rare and minor home repairs.
- What type of tool fits better? Should be studied existing species staplers and, depending on the purpose of purchase, choose the most suitable one.
- Technical characteristics - what should they be? It is recommended to pay Special attention on the impact force parameter.
- How much money can you safely allocate for the instrument? There are a huge number of manufacturers on the market offering high-quality furniture staplers for any budget. All that remains is to find the most suitable option for yourself.
- What price/quality ratio would be acceptable? Powerful tool equipped additional functions, will cost more than its simpler “brother”. You need to decide for yourself where the line is when even the highest performance characteristics cannot become a motivation for buying an expensive furniture stapler.
The last two points are a matter of purely personal ideas about what an instrument should be. Recommendations from specialists make sense only regarding the choice of the type of stapler and the analysis of its main parameters.
Furniture stapler: how to choose - mechanical or electric?
Most often, either mechanical or electric stapler. Which one is better to buy?
| Tool type | Principle of operation | Advantages | Flaws |
| Mechanical (manual, spring) | By pressing the lever, the user causes the spring to compress. At the moment of its release, the staple becomes clogged. |
|
|
| Electric | The bracket is clogged due to exposure to electrical energy. The user just needs to press a button. |
|
|
Manual models – perfect option for users who periodically need to perform small amounts of work. The price of mechanical staplers is quite reasonable and does not exceed 5,000 rubles. (mostly the cost is in the range of 400-1500 rubles.) Thanks to the simplicity of the design, the risk of device breakdown is significantly reduced, which makes the purchase a truly wise investment.
If a furniture stapler is needed to perform serious tasks (upholstery large quantity furniture, room insulation), then it is better to give preference to a more powerful and productive electric model. The cost of such a tool is slightly higher and amounts to approximately 2000-10000 rubles. (but there are also more expensive options).
There is another subtype of construction stapler - pneumatic. It is often used in manufacturing environments and is a permanent installation. The staples are driven into the surface using the force of compressed air, which ensures high performance work. The cost of “pneumatics” is very high, since the tool additionally requires a compressor. It is not profitable to buy such a stapler for home use.
How to choose a furniture stapler based on basic parameters
The operating features of a furniture stapler are influenced by its specifications. When making a choice, you need to pay attention to the following parameters:
1. Impact force. It depends on the type of stapler: the smallest for a mechanical model and the largest for a pneumatic one. But among any category of tools there are staplers that hammer staples better and worse. When looking through the assortment of hardware stores, you should stop at models that are capable of working with a longer bracket length: it is this characteristic that indicates a powerful impact force. For example, when choosing between a 4-8 mm and 4-14 mm stapler, it is better to give preference to the latter option: you can reduce the impact force, but not increase it.
2. Security. Although a furniture stapler is quite easy to use, you can get hurt with it. Typically, manufacturers take care of user protection by equipping the tool with the following functions:
- switching on only when the stapler is pressed to the surface;
- Automatic shutdown when the staple is not fully inserted into the material.
3. Ease of use. If you have to work with a stapler for more than fifteen minutes, the comfort of using the tool will become a really important criterion. The most important characteristics in this sense are:
- features of the handle. Comfortable handle – undeniable advantage when choosing a furniture stapler. It is recommended to hold the instrument in your hands before paying for it;
- presence of impact force regulator. This function is found in almost every stapler and allows you to configure the tool depending on the type of surface being processed;
- the ability to visually track the number of staples. It is advisable that the selected stapler be equipped with a viewing window. The user will be able to control the stock of staples during operation and understand how soon they will have to “refill.”
4. Staples. Regular staples are suitable for working with soft materials. If you plan to upholster furniture with fabric, you should give preference to tempered ones. The most widely used are U-shaped brackets of type 53.
Among the manufacturers producing furniture staplers for home use, – Sigma, Bosch, Stanley, Novus, Neo, TOPEX, Ultra. By purchasing products from these companies, the user can be confident in the quality of the tool.
A good furniture stapler is always useful. Even renovation work are not carried out so often, the tool will justify the cost of purchase: sooner or later there will be a use for it.