Finishing door slopes horizontally. Options for finishing the external and internal slopes of the entrance door

Having just seen enough of the new one installed door, we come to the conclusion that, unfortunately, the work did not end there. From the outside, everything looks quite luxurious and beautiful, which cannot be said about the hallway of the apartment. Bare concrete or brick walls And polyurethane foam far from pleasing to the eye. In order to fix this, you need to complete work on the front door beautiful finish its slopes.

The problem is that there are several options for solving this problem, but this article will help you choose the right materials and also explain how to install them correctly yourself.

So here you go basic finishing methods:

MDF panels
Drywall
Plaster

In order to choose the option that is right for you and the interior of your home, we will consider separately the disadvantages and advantages of each of them.

Finishing door slopes using MDF panels

As we know, most often entrance doors are made of wood, and often manufacturers offer us to purchase door slopes made of MDF. U of this material there are a number benefits, here are some of them:

Easy to install will save a lot of time, effort and nerves, which is important.
High strength. The sheets are practically not deformed.
MDF is resistant to the development of dangerous microorganisms.
Refers to to emission class E1, which means that this material emits virtually no phenolic compounds.
The work done with MDF sheets looks very presentable.

It is because of these advantages that MDF has now become one of the most popular materials. However, it has one drawback. It is not always possible to choose a finish exactly to match the color of the door due to small range of colors.

Required materials and tools:

Step 1. Using a hammer drill and dowels attach wooden slats along the inner and outer edges. MDF panels will subsequently be attached to these slats, so they need to be installed level, using a level.

Step 2. So, start with the resulting frame fasten panels. Clamps and small nails will help you with this. The edge panel must be screwed all the way through to the corner strip.

Step 3. Using liquid nails and decorative corners (platbands can be used), we “hiding” the corners of the panels.

Now we will look classic way processing, the best way suitable for front door. So let's look at it pros:

But along with the advantages, there are also minuses:

There will be a presence in your apartment a large number of dirt and debris If you choose this finishing option, you can't wallpaper it before you finish the door.
Construction mixtures take a long time to dry, so Finishing work will take time, okay 2−3 days.

Required tools and materials:

Construction rule.
Masking tape, beacons.
Cement, sand, primer.
Putty, spatula, trowel.
Level, sandpaper, brush.

Step 1. Fully prime the wall, to avoid the appearance of fungus. To do this, dilute the primer as indicated on its packaging and apply it to the wall in an even layer and wait until it dries.

Step 3. Mix cement with sand (ratio 1 to 4). This solution needs close the deepest places and potholes. After waiting for the solution to dry, take the rule and level the slope. To do this, distribute the solution over the beacons. Do the same with the rest of the slopes.

Step 4. Wait for everything to dry. Putty the slope and rub in the finest putty sandpaper.

Step 5. Cover the doorway wallpaper or paint.

Finishing slopes with plasterboard

This type finishing is very easy to confuse with plastered slopes, but there are still differences. The main one is no dirt. Drywall is also easy to use and durable. To improve thermal insulation, you can hide insulation inside it.

Of course, it was not without its drawbacks. The thing is that sheets of drywall cannot withstand sharp blows because they are very fragile. But despite this disadvantage, drywall remains good option. And now we will study, perhaps, one of the most simple ways finishing door slopes drywall.

Required materials and tools:

Drywall.
Rule, level.
Perforated corner (metal corner).
Stationery knife.
Putty.
Glue for drywall.

Step 1. From plasterboard sheets cut out the pieces to size you need.

Step 2. Dilute the glue as directed on the package and apply it to the back of the drywall. Don't skimp on glue.

Step 3. Place the sheet on the wall and press down harder, while simultaneously leveling it. Repeat the operation on the other sides.

Step 4. Wait until everything is dry and cut off the excess drywall with a knife. Using a stapler, putty and glue attach the perforated corner.

Step 5. Putty.

As we see, there are many finishing and design options. You just need to understand yourself and choose from them those that are suitable specifically for your home. I would also like to draw your attention to quality of materials. That is, you need to decide what is more important to you, durability or beauty? Or do you want to find an acceptable compromise? If you can do this, a beautifully decorated door awaits you. You will undoubtedly be able to do the work yourself, as the article describes simple ways finishing.

Slopes for a laminate door: video

Professionals have managed to bring the technology of installing windows and doors to perfection. Special attention in this work, slopes that protrude mandatory element. According to current terminology, slopes are the surfaces of the walls around the door.

Peculiarities

After installing the door, you want to relax, but the most important stage is just ahead. After installing the product in the opening, it turns out that the door slopes look, to say the least, ugly, and can spoil the first impression and the joy of replacing the door. A completely reasonable question arises: what can be used to cover the walls to make them look attractive.

The most popular options are to plaster and then paint or cover the space with laminate. Both options are practical, but when working with laminate you will have to do lathing. If you have no experience at all in conducting construction work, and want to spend a small amount, then plaster remains the most attractive option.

There are several reasons why you should choose plastering walls. Among the main advantages:

there is no need to make a lath, which on interior doors will take up part of the space in the passage;
there is no need to involve specialists in the work;
low cost of material;
it takes half as much time as in any other case when designing slopes.

But this method also has disadvantages that are worth knowing about:

it is necessary to additionally coat the slopes with paint;
from an aesthetic point of view, not the best option.

Working with laminate requires not only experience, but also patience. Creating a sheathing takes more time, additional tools will be required:

hammer;
glue;
screwdriver

It is necessary to spend money not only on purchasing material, but also on dowels, wooden beam, decorative corner and screws. But, from an aesthetic point of view, this is the most attractive design option for door slopes.

Kinds

Slopes can be classified into two large groups, without taking into account the material from which they are made and the installation location:

internal;
external.

Internal ones carry not only a functional load, but also an aesthetic one, so working with them is especially important.

There are quite a few options for how to finish the surfaces of the walls around new door, it doesn’t matter whether it’s interior or entrance. According to the material used, they are:

wooden;
cork;
plastering;
plasterboard;
plastic.

Depending on the material from which the slope will be made, the installation technique also differs.

Materials

Finishing the slopes will help highlight the new metal door. Among the most popular materials:

dye;
ceramics;
wallpaper;
tree;
drywall;
stone;
laminate;

PVC panels are a modern and inexpensive finishing material with aesthetic appeal and reasonable cost.

Device

In places where the front door is adjacent to the walls, heat leaks, so polyurethane foam is used around the structure. It helps to quickly close gaps and achieve the necessary tightness.

The panels can be easily mounted on a safe door; however, you will need to purchase corners and trims if simple plastering is not intended.

This element makes it possible to carefully close the structure after installation:

cracks;
polyurethane foam;

They can be considered as additional protection from drafts, smells from outside, noise. If you look at it in cross-section, it looks a little like a sandwich.

The first layer consists of:

primer;
plaster;
corners;
finishing.

Before applying the primer, the surface must be prepared. You can use a brush or roller. Sometimes after its application, if it is necessary to thermally insulate the opening, polystyrene is laid.

Plaster is the simplest way to finish openings, but you can use drywall, which is applied to a previously applied layer of plaster. Be sure to use a level or beacons, since the surface must be flat.

The use of drywall allows you to qualitatively prepare the opening for further finishing. It's cheap and lightweight material, most often it is used for installing interior doors. The cut sheets create a smooth surface without unnecessary loss of time; working with plaster will require experience and patience. A layer of plaster is best used on the front door, since there the wall surface can be exposed to moisture, and drywall cannot withstand it.

Platbands or a corner are installed along the edge, which acts as reinforcement for further application of putty and grout. Finally, a finishing primer must be applied.

The second layer of the slope is decorative finishing, which may vary. Some decide to simply paint the surface, while others use ceramic tiles and even natural stone.

Surface preparation

Before installing door slopes, it is necessary to prepare the surface. The work consists of several sequential actions:

With door design remove the locks and handles, cover it with a film that is easily attached with simple tape, and cover the floor with ordinary cardboard;
old plaster is removed using a hammer drill;
construction waste is removed, freeing up space;
the gaps that appear in sight are filled with polyurethane foam; before this, experts advise moistening the surface with a spray bottle with plain water, which improves the adhesion of the material to the surface door jamb;

the foam dries in 8-12 hours, after which the excess is removed with a knife;
the surface is treated with antiseptic impregnation;
if provided electrical cable, then it’s worth laying it at this stage;
You can begin plastering or installing the frame.

DIY installation

It’s not easy to make repairs yourself, you just need to study the issue more carefully. If you decide to plaster the slopes, then, in addition to a small container for the solution, you also need to prepare a construction mixer. Its use guarantees the absence of lumps and uniformity of the applied composition.

There is no way to do without a level during finishing, the length of which must be at least two meters. Plastering is done using spatulas, one should be narrow, the other wide. The primer is easily applied to the surface of the jamb using a flat brush.

After preparatory work The cut edges of the polyurethane foam must be sanded using sandpaper. The use of a primer is mandatory because it provides better adhesion of the plaster to the surface. Experts recommend applying the primer several times, but only after the first layer has completely dried.

Now you can start plastering the surface. The composition is applied in a thick layer starting from upper slope doors. A wooden lath will allow you to quickly level and remove excess plaster. Perforated metallic profile pressed into the corners helps strengthen them.

The starting coat must be completely dry before applying the finishing coat, which is necessary to hide minor unevenness.

Laminate, PVC is attached to a frame, for which it is first necessary to make a 2x4 cm beam.

The timber is sawn to the size of the slope, on each part of the doorway they are attached perpendicularly to the planks, 4 on the sides and three on top. Nails can be used as a fixing element.

You can beat the corners only if you bend the plastic panels. Their structure is hollow at the end, there is a void along the entire length, so cuts can be easily made. It's very easy to make it simple stationery knife. The cut out modules are attached to the frame using self-tapping screws, and the bent panels are attached to the wall.

You should work in the following order:

mark the border of the finishing elements;
5 holes are drilled in the wall, which in the future will be covered by a finishing panel;
Wooden plugs are driven into the recesses, into which self-tapping screws should be screwed, thus securing the finishing material to the wall.

Drywall like construction material allows you to quickly finish slopes.

At the first stage, it is necessary to drill holes along the entire surface of the opening, the distance between which should be 20 cm. Dowels are installed in them, into which the screws are then not screwed in completely. It is necessary to select the dimensions of the starting rail, which will act as a guide. To do this, you need to measure three sides of the opening. The upper guide should be the width of the opening, since the sheets of material on the sides will rest against the slope from above. The first top rail is screwed to the wall using self-tapping screws.
Drywall sheet on next stage cut according to pre-made markings. If you do not follow the technology, the edges will turn out torn. Be sure to use a ruler or anything that can replace it during installation. Upper layer The paper is cut easily, then the knife is a little more difficult to plunge into the plaster, but you need to ensure that its tip becomes visible from the back side. If used glue mixture, on which the drywall will be placed on the wall, then it is important to carefully read the instructions from the manufacturer in order to maintain the proportions.

Adhesive mass fits on reverse side sheet of material, coat the dowels as well. The edges of the strip are inserted into the guide, and the drywall itself is pressed against the base. The same should be done on the sides. Any excess glue that appears is removed immediately, as it leads to deformation.
Beacons are required to keep the sheet in a constant position. If gaps appear between the sheets, you can use excess glue to fill them. Finishing processing is possible only after 24 hours.

MDF slopes look good. Before installation, the wall surface must be treated with lime cement mixture. After it dries, a primer is applied. Before cutting the material, you should carefully measure the corners of the joints and cut off the corners. If you place elements next to each other, there should be no space between them. The first part of the opening is formed, on which it is applied adhesive composition. The sheet is propped up until it is well secured in place. The side parts are installed second. The corners can be secured with liquid nails.

If you want to finish the slopes with paint, then depending on the material you need to choose the composition. First, the door is removed, impregnation is applied to the wood, if they are going to be varnished, then stain. For other dyes you can use drying oil.

You can cover the slopes with any wallpaper; there is no product specially created for this. The pattern will not look attractive, so it is recommended to choose plain ones. The technology consists of several stages:

glue next to the doorway large leaf wallpaper, which should cover the size of the entrance;
cut it horizontally so that the slope can be completely covered;
using a rag or roller, smooth the material over the surface so that there are no bubbles underneath;
repeat the steps on all sides of the opening.

Wet rooms are finished with resistant materials, this also applies to slopes. Stone or ceramic tiles are ideal for sealing. Before installation, the surface must be plastered and leveled. Experts do not advise choosing heavy tiles, as they will not adhere well to the wall. The operating procedure is as follows:

the material is cut according to the dimensions of the slope using a glass cutter or tile cutter;
glue is prepared in accordance with the manufacturer's instructions;
the composition is applied to the surface using a spatula, which helps to distribute it evenly;

the area of application of the adhesive should be equal to the area of the tile being glued;
the reverse side of the tile is also covered with the composition;
The material should be slightly pressed to the surface, checking the correct position using a level;
the second and subsequent tiles are installed with a gap of no more than 3 mm, and it must be free of glue; for this it is best to use beacons.

The composition under the tile will completely dry only after 4 days, after which the plastic beacons can be removed and the free space filled with grout.

Door slopes in an apartment are a great opportunity to experiment with design. You should definitely take into account the purpose of the door, that is, whether it is an entrance or an interior door, the purpose of the room, what material the frame in the opening is made of.

Some types of materials are not so easy to install; skills, experience, and tools are required.

When using drywall, tiles or wood, you will need to take correct measurements before installing the slopes. The slopes in front of the front door should not have free cavities, this will increase the durability and reliability of the cladding.
Finishing wood panels or made of plastic looks more attractive than painting surfaces. Drywall allows you to hide all errors. Using this option, you get rid of unnecessary expenses when purchasing materials needed to level the walls. This method can rightfully be called economical and simple, since you can handle the installation yourself.

Plastic panels rarely used for decoration doorways, because the material does not withstand physical impact and breaks even with a small impact. This option is never reliable or durable. But wood is durable and reliable material, which will serve for a long time. This finish is suitable for different rooms.
Finishing work must be carried out taking into account the size of the doorway and the materials used. Thermal insulation is necessary as an additional installation step for entrance doors, since they must not only be durable, but also not create drafts in the apartment. When working with the front door, you need to pay a lot of attention to sealing the holes. Most often, polyurethane foam is used for this, which, after application, expands in volume, thereby filling the entire hole, leaving no free spaces inside. After complete drying, excess foam can be easily cut off with a simple knife, thus leveling the surface for further decorative finishing.

The plaster can be used directly on brickwork or already on installed panels MDF. If you have to work with it, it is worth studying in more detail the features of the material and the process of its application, since this is one of the most complex options for finishing slopes.
Advantage perforated corners difficult to overestimate, since they can significantly reduce the time spent on leveling the surface. The solution applies easily to them, and they themselves are completely hidden from view after applying the plaster.
It must be remembered that before starting work on finishing the slopes, especially if it is an entrance door, it is important to close all gaps. If this is not done, then cold air begins to penetrate into the gaps, which condenses into the wall, wet spots appear on the wall, and subsequently mold, and decorative trim falls off.
Surface preparation is important for plastering walls. The work takes a lot of time, but it is recommended to process the surface in several layers. First, a layer of primer is applied, which improves the adhesion of the plaster to the surface. To achieve perfect flat surface a profile must be applied, secured with dowels.

To make the mortar, you should use cement, sand, mortar, you can buy it already ready mixture. The surface application technology involves starting work from the slopes of the upper area. First, a thick layer of plaster is applied, after which the excess is removed. To ensure smooth slope angles, it is recommended to use a perforated profile. It is fixed on the surface of the applied plaster mixture. Only after this is the finishing layer applied, which should be thin. It helps eliminate unevenness and roughness.
If you work with MDF panels, the base must be made of limestone cement mortar. After drying, it is applied to a surface previously treated with a primer. The panels should be divided into three parts, each of which corresponds in size to the side of the doorway. Special glue is applied to the surface, then the panel is installed.

The work of installing slopes is carried out in strict sequence; if you skip even one stage, the end result will only be disappointing, and the materials will be wasted.

To learn how to properly trim door slopes, watch the following video:

Creating door slopes is ideal option to complete the finishing of any opening - including external and interior doors. These works are the same important stage repair, as well as the process of installing the canvas itself. And the final picture, which can affect the entire interior of the room, largely depends on their quality. In order to install door slopes with your own hands, you must have certain skills, as well as decide on the implementation method and materials of construction.

Classification of structures

There are several options for how to make a door slope with your own hands, which involve using:

drywall, suitable for finishing surfaces whose leveling will require a large amount of solution. With the help of plasterboard sheets, the surface is easily leveled and, at the request of the artist or customer, painted or plastered;
plaster, used in cases where the surface can be leveled using a layer of mortar no more than 30 mm thick. This option is not the fastest, but it is profitable and simple;
laminate, which is suitable for doors or arches already finished with this material. Finishing door slopes laminated chipboard not suitable for rooms with high humidity and, even more so, for external doors;
MDF panels, resistant to both temperature changes and high humidity, making it suitable for any door;
tree, a material that is not cheap, but has good aesthetic and strength characteristics. For finishing the slope doorway by doing repair work various classes(economy, standard or exclusive) both ordinary wood and valuable wood species should be used.

Choosing the option with door slopes with your own hands, decorative stones or tiles is a rare option, but it also has a right to exist. It is used mainly for the entrance doors of mansions. Looks especially good decorative rock in combination with a porch, terrace or path to the house made of the same material.

The variety of ways to finish door slopes allows you to choose suitable option for any conditions. One of the main selection criteria is compliance decorative characteristics designs general interior. If several options are suitable for the design of the room, choose the one that most suits the tastes and financial capabilities of the home owner.

DIY door slopes

During the installation process, it is necessary to prepare the surface. And only then apply the chosen finishing technique. And it, first of all, depends on what kind of doors we are talking about - those installed between rooms or entrance ones.

Slope preparation

In most cases, the surface is pre-leveled. To do this, the contractor must first prepare necessary materials– plaster, primer, starting putty, construction mixer(or a suitable drill attachment), roller, mesh, masking tape and bucket. In addition, to prepare for finishing, the slope must first be completely cleaned of old finishing materials (such as polyurethane foam or plaster) and dirt. And then move on to the alignment steps, which can be found on the Internet and even watch a video of this process:

Prime the surface;
in a suitable container;
Apply the solution, leveling it until required thickness. The adhesion of the material can be improved by spraying the concrete with water. And, if the wall was severely damaged when installing the door, a special mesh should be used;
using corners;
Rub the dried layer of mortar until cracks and irregularities disappear;
Re-prime;
Bring the surface to normal condition using already
Having leveled the surface, proceed to final finishing– for painting (if the simplest option is chosen), wallpapering, laying tiles, installing drywall or panels.

Slopes for entrance doors

If we consider options suitable for external doors, it is worth noting the three best, which have a sufficient margin of strength and can withstand constant closing vibrations. Internal slopes are finished with laminated chipboard or MDF. The panels are installed using polyurethane foam, liquid nails or using guide strips.

The exterior decoration of the door is most often done using plaster, onto which tiles or stone can be attached. The beginning of installation does not differ from leveling the surface, but ends with fixing the finishing material with glue. If additional finishing is not expected, the plaster is painted.

Slopes for doors between rooms

Do-it-yourself work on finishing the slopes of interior doors can be done using almost any materials. The main thing is to maintain consistency between the styles of structures facing the same room. MDF slopes look good in a living room - especially if you match them to the tone of the interior. Slopes covered with wallpaper are also suitable for decoration, as they visually extend the walls and increase the size of the room.

In the bathrooms they use ceramic tiles - again the same ones that were laid on the walls. Ceramics are glued to a leveled surface. If the room is finished with plastic or metal-plastic panels, you should choose the same materials for the slopes. The same applies to rooms whose enclosing structures are finished with plasterboard.

Among the options suitable for interior door slopes, panel and plasterboard structures. In addition to the fact that they look more profitable, the cost of such a design will be more favorable than for options made of wood and tiles. And the time required for repair work is shorter compared to

Paneling

The method for making door slopes from MDF panels is suitable for any door and involves installing a wooden frame, the slats for which are purchased in advance and treated with an antiseptic. In the process of choosing a material, the main thing is not to make a mistake with the dimensions. It should be taken into account that the thickness of each strip in the process increases by the size of the plate attached to it;

Panel finishing begins with the selection necessary tools and materials:

panels used for finishing;
wooden blocks;
self-tapping screws;
screwdriver;
roulette and level;
hacksaws.

The technology for finishing the slopes of interior doors with your own hands from MDF is as follows:

Removing peeling paint and old plaster;
Surface primer, which does not need to be leveled;
Fastening the frame from bars at a level with leveling distortions on the walls (using boards or pieces of plywood);
Pad mineral insulation(especially relevant for external doors);
Cutting panels to fit the slopes to be finished, fitting or fitting.

The final stage of work is to secure the material to the frame. If self-tapping screws are used for fastening, they are screwed in slightly deeper into the material and. Although when installing MDF panels, liquid nails are most often used, which are applied pointwise to the guides.

Approximately the same technique is also suitable for installing laminate as finishing slopes for interior doors. Work begins with securing the bottom board with self-tapping screws and securing next three to the castle. The fifth board is also installed using fasteners or liquid nails, after which the frequency continues. For a horizontal slope, each plank is fixed. The corners between walls and slopes are finished decorative corners or platbands.

Plasterboard structures

The option of installing slopes for interior doors made of plasterboard sheets is suitable if the enclosing structures of the room are finished with the same material, and leveling the surface using only putty will require significant amount material. The choice of the two possible options is influenced, first of all, by the length and width of the slope.

Yes, for small ones assembly seams and minimal damage when installing the door, the first method is used:

From plasterboard sheet elements are cut taking into account the slope angle;
The surface of the slopes is cleaned and primed;
The dry mixture for gluing drywall is diluted with water according to the instructions;
The finished substance is applied in a thin continuous layer to the element that needs to be pressed against the prepared slope;
The panels are installed starting from the side surfaces;
After installation, the cut parts are fixed using masking tape.

The glue dries, after which the seams need to be puttied and cleaned with fine-grained sandpaper. And after another layer of primer is applied to the slope, it is considered completely ready. Additional finishing can be installed on top of the drywall.

No one wants to overpay when installing doors. That is why the decision is often made to make the slopes of the front door with your own hands and not hire builders. If you approach the process with imagination, even a non-specialist can handle the work.

You don’t always have a complete set of tools at home for all occasions. And apartment owners in panel houses know very well how difficult it is to drill holes in concrete walls oh, still Soviet-built. Therefore, in some cases, you can sacrifice the correct finishing of the slopes, significantly simplifying your work.

PVC slopes with and without frame

Perhaps the simplest, fastest and “cleanest” way to finish slopes is to decorate them with PVC panels. There are even universal panels on the market that combine a slope, a corner and a platband.

The advantage of such a slope is the flexible connection between the panel itself and the platband, allowing it to be adjusted to walls with angles deviating from 90 degrees.

The installation process of these slopes is incredibly simple:

Due to the flexibility of plastic, such slopes can even be installed on uneven walls. But you won’t get an ideal result - cracks will certainly form, and in places with insufficient amounts of polyurethane foam, the plastic will “walk.” But this is the fastest solution to the problem!

PVC slopes on a primitive surface will look much neater and more reliable. wooden frame. You can even use PVC panels with a wood or stone design, without any platbands at all.

For this:

To prevent the panels from slamming when the front door opens, the empty space between the bars can be filled with insulation suitable thickness or blow it out with foam. This will also provide additional sound insulation.

“Wet” method of finishing slopes with your own hands

Leveling and plastering slopes remains the most economical option. And even if you can’t do everything perfectly smoothly, this will not affect their service life at all. The process takes place in several stages:

Preparation:

Application of screed:

the cement mortar is mixed - you can make it yourself or purchase a ready-made one;
for 1 kg of cement you need to take 1 kg of lime and 5 kg of sifted sand - the solution should be moderately thick and not spread, because the vertical walls and the top of the slope are leveled;

After the screed has dried, you can apply a regular primer and begin applying plaster.

Slope putty:

Decorative finishing:

slopes can be painted or covered with wallpaper, creating a monolithic canvas with walls;
in both cases, a primer is applied to the putty, and a decorative coating is applied on top.

You should not try to save money and skip any of the stages - this will only worsen the final result and you will have to redo everything again.

Drywall slopes

If working with a hammer drill doesn’t scare you and bother you cement screed If you don’t want to, you can decorate the doorway with sheets of drywall. This is especially true for houses with thick walls, where the slopes are very wide.

Frame for slopes made of plasterboard

So that the drywall sheets are securely fixed and can even withstand finishing artificial stone or tiles, you will need a wooden or metal frame:

For the slopes of the front door, especially if it faces the street, it is better to use moisture resistant drywall. It is also important to remember that there is always a small gap between the floor and the gypsum board to prevent the drywall from getting wet. With decorative finishing, this gap will still be hidden.

Drywall slope on plaster

Instead of a frame, gypsum boards can be secured with mounting foam and plaster. Is it not strong enough? But if the load on the sheets is small, then the safety margin should be enough. The technology itself is simple, even a non-specialist can handle it:

What should not be forgotten when finishing slopes

Slopes are not only aesthetic appearance doorway, but also its protection from drafts, moisture and noise. Therefore, regardless of the finishing method, it is important not to forget:

Check the tightness of the door frame installation. For this it is sufficient closed door And open window draw a lighted candle around the entire perimeter. If the flame deviates to the side, you need to add polyurethane foam in these places.
Protect walls under overhead slopes from fungus and mold. For brick and concrete walls there is a special antiseptic primer, for wooden and frame walls you must not forget about the vapor barrier device and treatment wooden elements fire and biological protection.
Remove all debris and loose elements around the door, even when installing slopes on the frame. Otherwise, the abrasive dust remaining after the repair will still seep into the room, and pebbles that periodically fall off will add gray hair impressionable residents.
Insulate the slopes of the door that goes directly onto the street, and not into the dressing room. Otherwise additional expenses heating is provided.

Even MDF slopes can be made without a hammer drill and unnecessary debris. This is clearly shown in the video:

Installing a new door is not the end of the doorway design process, but only its beginning: everything does not look very presentable and creates the appearance of an unfinished renovation. If the door is an entrance, this concerns not only the aesthetic side of the issue: the polyurethane foam, while it is not yet protected from the outside, accumulates moisture. Because of this, heat leaves the room, and cold and noise penetrate inside through the cracks. To avoid all these troubles, it is necessary to finish the door slopes. You can do the work yourself - it is not complicated and, if you have the ability to use tools, it is quite within the capabilities of a home craftsman.

How to make slopes on the front door

To finalize the doorway, several stages of work will be required: insulation, creation of a load-bearing base and the final stage - decorative finishing.

Let's consider the options interior works for finishing door slopes.

Application of cement mortar. Using a solution is reliable and inexpensive for pre-finishing the slopes of interior doors. But don’t forget – working with the solution is the most labor-intensive. For wide slopes, you will need a lot of material to fill the gap with cement mixture.

To obtain an ideal result, the master must be able to prepare the mixture and apply it correctly. When choosing finishing material you need to take into account the design of the room - it is chosen in such a way that the decorative finish of the door slopes is in harmony with color scheme and room decoration.

Application of the frame. The frame can be installed in advance or after the door is installed. After which finishing elements are attached to it - wooden lining or PVC panels. This method is the most quick solution guaranteeing perfect results. Moreover, this way you can not only get a very smooth surface, but also hide it in door block telephone or electricity wires. The disadvantage of this option is weak strength. Because of this, it is not recommended to use frame decorative finishing of slopes for entrance doors - it is easy to break.
Finishing tiles. Tile adhesive is applied to the brickwork and the tiles are laid. The corners between the door jamb and the tiles are sealed with grout, and between the tiles and the wall of the room they are sealed with a plastic or wooden corner.

Read also: Laying it down wooden floor on the balcony with your own hands

Installation technology without using a frame: plastering

There are several options for finishing the slopes of the front door, but any of them begins with checking the correct installation of the door itself - whether it is installed vertically, whether the seams are sealed. You can check the tightness with a lit candle, passing it around the entire perimeter. If the flame fluctuates, you need to add sealant.

To finish the slopes of an interior or entrance door from the inside, experts recommend first gluing masking tape to their surface. This is necessary to protect the canvas and box. Then the loose masonry and dust are removed and the plastering process begins.

It all happens as follows:

The surface is covered with a primer material. The material most suitable for this purpose is deep penetration. It is necessary to ensure strong adhesion of the layers and strengthen the base. The lintel on top of the door needs to be treated especially well.
When the primer has dried, use a level to install the beacon profiles - they are needed to work with the rule.
After installing the beacons for finishing the slopes after installing the door, you need to prepare a mixture for fixing. It is best to take river sand(3/4 parts) and cement. M-200 or M-150 will do. You will need 1/4 of it. Water is added little by little until a solution enveloping the instrument is obtained.
The finished solution is forcefully thrown onto the wall surface using a spatula or trowel until the profile is completely covered.
After filling small area Each time they check the correct operation by applying the tool to the beacons. This will ensure a smooth surface.

Drywall installation

Usually, few home craftsmen know how to make a plasterboard slope on a door, but meanwhile, this is the simplest option. To do this, you do not need to level the surfaces or use other materials. The main thing is that the door is positioned correctly. If a small error is noticed, you can eliminate the defect with a layer of plaster (thickness no more than 1 cm). If the slopes are severely damaged, first level the opening with plaster and only then attach the panels.

Read also: What to do if the walls are crooked? Do-it-yourself visual alignment of walls

Subsequent steps for finishing the slopes after installing the front door look like this:

Carefully prime the base for drywall.
Measure the slopes and make markings. Double-check the marks using a square and tape measure.
Cut the sheets to the required size. Apply glue to the prepared sheet of drywall using the square-cluster method. The application step is 15-20 cm. The diameter of each glue spot is 3-5 cm.
When the glue dries a little, take the drywall and place it in the desired place.
Align the sheet and press it firmly with your palms. Do the same with the remaining parts.
When the glue is completely dry, install it on external corners painting profile.
Conduct finishing slope corners and walls with a special mixture.

Using the Frame

How to make slopes on a door with your own hands if it is made of heavy material, so that no unpleasant surprises happen during operation? This usually happens when, for example, the opening of a metal door is finished with concrete: after a few months, under the weight door leaf the plaster will begin to crack. Accordingly, in order to protect the slopes from the weight of the door, it is necessary to choose the right finishing material. In case of metal door It is best to make slopes using a frame. This will allow:

Prevent deformation.
Eliminate excess space around the slope.
Use heavy sheets for work. For example - MDF.

When using a frame, you can finish not only the slopes of the front door, but also perform work in those rooms where high levels of humidity are possible - in the bathroom, in the kitchen, in the corridor.

To build the frame, wooden slats impregnated with antiseptic are used. Suitable aluminum profile. Next - how to make front door slopes with your own hands:

Prepare the opening. Clear away debris. If there are cracks, seal them.
Apply an antiseptic primer after the solution has dried.
Set up the timber (profile). Lock it on capital foundation dowel-nails. Also install and secure the second stand.
Install parallel posts around the perimeter. To strengthen the structure, it is necessary to install longitudinal lintels for subsequent finishing of the entrance door slopes with panels, connecting both parts with them.
Lay the communication cable.
Make as accurately as possible according to the right sizes planks. Lock them in liquid nails. This must be done so that the gap between separate elements was minimal.
Strengthen the fastening using self-tapping screws.

Read also: Do-it-yourself application of liquid wallpaper (decorative plaster) – room for creativity

Features of finishing

To properly make slopes on the front door or on interior doors, you need finishing perform the most suitable material. But this is only if one is needed. For example, MDF application does not require the use of additional finishing: the surfaces of the material are highly decorative. Therefore, the only thing that may be needed is to purchase platbands and disguise the joints. Of course, mastic or furniture stickers need to be matched to the tone of the main decoration of the room.

If for finishing slopes internal doors plaster was used, then you can paint the surface, decorate decorative plaster, paste over with wallpaper. Before painting the slope, it is covered with starting and then finishing putty - this will make the surface smooth. When the plaster dries, apply a primer on top of it, then a water-based emulsion, and cover it with acrylic paint on top.

When finishing the slopes of the front door from the inside, wallpaper is rarely used today - it is difficult and time-consuming. However, a few tips from the experts will help you cope with the process faster:

There is no need to apply wallpaper after the door installation is completed. This needs to be done when the walls of the entire room are finished.
It is not advisable to stick wallpaper with a pattern near the door.
The canvas must be designed so that it can cover the entire slope in width.
You need to cut off the fabric with excess - this is necessary for overlap.

Conclusion

All of the above technologies have their own nuances. Therefore, when deciding how to make slopes on interior or entrance doors, you need to take into account all factors. Any of these may influence the choice of materials and type of construction.

The photos below will help you choose the most suitable option for finishing door slopes.