Skirting boards are matched to the color of the floor or doors. Color combination of skirting board, floor and doors

Skirting board installation is finishing touch under repair. Plinth performs not only decorative function, but also closes the not always beautiful joint between the floor and the wall. It is important to choose the right color for this element so that it harmonizes with the floor and emphasizes the overall design of the room. Let's figure out how to choose a skirting board for the floor.

When choosing, they are repelled by the color of the floor, door or walls. Interesting design solution can be obtained by choosing a skirting board that contrasts with the color of the floor and walls. But in order for such a solution to look harmonious and beautiful, you need to have a taste.

If the plinth is selected according to the texture and color of the wall decoration, then it is purchased after the completion of the fine finish. This will allow you to take into account the resulting shade of the wall and choose the perfect tone. As a rule, the plinth is chosen after the repair of the walls and floor is completed.

When laying parquet or other wood flooring it is best to immediately choose or order a skirting board for the floor from the same manufacturer. This will allow you to get an element from the same type of wood and the same tone as the main floor.

Plinth puts a logical point in the decoration of the floor and walls

Most Difficult choice based on the color and texture of the doors. In this case, the plinth is designed to emphasize not only the floor, but also the door frame.

Which material is better

The material of the skirting board must match the material of the floor covering:

Perfect for wood flooring or high quality laminate suitable wooden solid wood plinth.
For a cheaper laminate, a plinth covered with veneer or made of MDF is suitable.
Products from MDF or PVC can frame the floor from any material except wood and tiles. Some models have special inserts. By mounting a strip of linoleum or carpet into this insert, you will get an element that does not differ from the color of the floor.
Only a plastic or special ceramic plinth is suitable for ceramic tiles.

Sizing

When determining right size skirting boards are based on:

the height of the ceilings in the room;
the volume of the room;
floor and wall color.

IN large rooms it is highly undesirable to install thin skirting boards. They will violate the geometry of the room, and disfigure the design of the room. More suitable for this case will be wide models, and their fastening should be carried out exclusively to the wall. In such rooms, models of white or contrasting colors look good.

For a small room with low ceilings, it is better to take a model of the same tone as the walls. Visually, the surface of the wall will continue, as it were, and the entire room will visually stretch in height.

For a standard room, they usually take models with a height of 4.5 cm to 7 cm.

Color matching

As a rule, the plinth is selected in the same tone as flooring. This approach is win-win. The plinth of the same color with the floor or walls does not stand out in any way, a merging surface is obtained. Sometimes designers suggest using 1-2 tones lighter or darker than the main coat.

Modern designers quite often pick up the plinth to match the color of the walls. This approach looks great on plastered or painted walls, but is not suitable if wallpaper with a pattern is pasted. The selection of skirting boards for the door is appropriate only if they are made of natural wood. The tone in this case is chosen identical with the platbands. In addition, make sure that the thickness of these elements is the same.

Sometimes designers take a skirting board in the same color as the furniture in the room or match it to some interior detail, such as a picture on the wall.

In very rare cases, skirting boards are chosen to match the color of furniture or interior details.

More recently, white skirting boards have been used. They look very interesting, but require taking into account the combination of the color of the floor, walls and furniture. Modern technologies make it possible to achieve optimal solution with the help of special design programs. You can “play” with colors in them and achieve the best solution.

White plinth

A bold enough decision is to choose a plinth in a contrasting shade. It is also better to make such a selection on a computer first.

Should be taken into account! For a natural wood floor, it is better to choose a wooden plinth, taking it to match the floor or a little darker. Other options for such floors, as a rule, look ugly.

Types of skirting boards for the floor by material

Modern hardware stores offer skirting boards that have a different color, size, shape and material. If desired, you can order a curvilinear sample repeating the bend of any surface. Models with a cable channel are in demand. Today, such products are produced not only from plastic, but also from wood. Consider the main advantages and disadvantages of skirting boards made of different materials.

Plastic

Plastic plinth is used for carpet, laminate and linoleum. As an exception, it can be used for ceramic tiles. Despite the fact that this is not an environmentally friendly material, it is popular due to its rich palette of colors, practicality, ease of care and low price. Such specimens do not rot, are not afraid of water and dirt.

Additional fittings are produced for plastic skirting boards: connecting elements and plugs. Unfortunately, the shade of these elements may not always match the color of the base material.

The plastic baseboards have channels for cable laying.

Fastening is carried out to the wall with self-tapping screws. For the convenience of consumers, models of various thicknesses, shapes, as well as having channels for the cable are produced.

The price fluctuates around $1. Additionally, you should consider the price of fittings.

Wooden

Such models make them solid wood. Their main advantage is ease of fastening, naturalness and environmental friendliness. Such an element is fastened with self-tapping screws, cutting off the required size with a hacksaw for wood or a jigsaw. If necessary, such a model can be easily repaired or dismantled.

Wooden plinth

The disadvantage is the sensitivity to humidity. They should not be used in utility rooms with high humidity.

Most often made from pine wood. The cost of such a model for one running meter depends on the quality of the wood used:

from $0.7 in budget models;
5 - 3 $ in higher quality options.

Oak and linden are more expensive types of wood, and the plinth of them will cost more:

from linden from $2.5;
from oak 5 - $ 8 and more.

These three types of wood I use most often. Other types of wood are used less frequently. For connoisseurs of sophistication, they produce products made of ebony and mahogany, acacia, dusia, merbau and other non-traditional wood species for construction.

When buying a wooden skirting board, you need to look at the characteristics of the wood, such as its class. Even models made from rare wood, but of a low class, will have low price. This is explained by the presence a large number knots, marriage or manufacturing e from a solid array, but by gluing along the canvas.

A wooden plinth, like a plastic one, can follow the contours of the elements of the apartment, but such a model will have to be ordered individually and the price in this case can reach $ 50 per linear meter.

Such a plinth will have to be made according to an individual project.

When choosing a plinth, it should be borne in mind that it will have to be varnished and in the future it will become several tones darker than the original color. Find out with maximum certainty what will be a little wetting it with clean water.

Veneered

Such models are a subspecies of wood, but they are not made from solid wood. For the base, as a rule, pine is used, and the top is covered with a thin veneer of more expensive wood. Such models have many shades, which greatly facilitates the choice.

The price of such products is in the range of $ 4.5 - $ 5.5.

Veneered plinth also refers to wooden

MDF

MDF plinth is used if the walls are covered with the same material. Such products are relatively resistant to water and dirt, do not fade in the sun. They are fixed with special clips on staples or on liquid nails to the wall. Mounting on brackets makes it possible, if necessary, to dismantle the plinth and reuse it.

The price fluctuates from 2 to 3 $.

Plinth from MDF

Ceramic

It's perfect the new kind plinth, which is used directly for edging the floor covered with tiles. It is often sold as a set. Buying this kit, you get a perfect suitable friend other materials. If you buy separately, you can choose to match the main material or a slightly different shade.

Ceramic plinth - the perfect frame for floor tiles

Another use of such a plinth is to frame between a wall covered with tiles and bathroom. This is a beautiful and aesthetic edging solution above the bathtub.

The price ranges from $4 to $5 per linear meter.

Styrofoam

Such material is not very suitable for the floor and is used for ceilings. May have different shape and relief. It is easy to cut, glued with special glue.

The price is from 0.3 to 4 $ per linear meter, depending on the complexity of the surface.

Styrofoam skirting successfully used for ceilings but not suitable for floors

Polyurethane

It's more of a decorative element. Elements are produced with a wide variety of shapes and appearance. It may, for example, resemble stucco.

Products are not afraid of water and pathogenic organisms, are lightweight, durable, and are not difficult to install. The polyurethane skirting board can be painted if necessary. Attached with glue.

Polyurethane skirting board

The big disadvantage of this material is the price. It ranges from $18 to $22 per linear meter.

Aluminum

Such products are produced from anodized aluminum, which gives them durability and greater strength. They are not afraid of water detergents and aggressive environments. All models have a cable channel, which is convenient and in demand by modern consumers.

Aluminum plinth

It is installed in public places (hospitals, enterprises, railway stations), as well as in amenity premises of the residential sector. Floor metal plinth is widely used for high-tech style rooms. This model comes with special fittings. Fastening is carried out with dowels to the wall.

The price for such models is from $ 5 per linear meter.

We lit different kinds skirting boards for the floor. We hope that our review will help you decide which skirting board to choose for the floor in your home.

The final stage of the repair in almost all cases is the laying of the flooring, which comes after the fine finishing of the walls, ceiling and subfloor. When choosing a floor covering for your floor, it is recommended to choose a skirting board along with it. Of course, this can be done after laying the flooring, but in this case it will not always be possible to choose exactly the skirting board that will be combined with the floor.

The main purpose of the skirting board is to close the gap that forms between the wall and the floor. In addition, it transforms the look of the entire room. If you pick it up wrong: the wrong color or unsightly small repair, then the impression of the repair may disappear, it will look slightly incomplete. If you choose it correctly, it will enhance and emphasize all the advantages of the design and decoration of the room. Moreover, in modern products there are grooves for passing cables through them.

Varieties of skirting boards

Skirting boards according to the material of manufacture can be:

plastic (including rather flexible modifications);
wooden;
from MDF.

Wooden baseboards

Plinth made of wood does not lose its popularity, even in the presence of other modern materials. Especially wooden plinth is preferable when laying a floor from expensive parquet. In most cases, when laying wooden floors a plinth of the same type of wood is selected. It is desirable to purchase it together with the coating itself. This will allow you to select products that will be identical in color.

Advantages of a wooden plinth:

strength;
durability;
environmental friendliness.

Disadvantages of wooden plinth:

susceptibility to changes in the moisture-temperature balance;
relatively high price.

Mounting

The installation of wooden skirting boards is most often performed on screws with dowels or on self-tapping screws that have flat heads. At the same time, the condition for the installation of such skirting boards is flat wall, as otherwise there is a possibility that they may deform and crack. It is also not recommended to glue them to the wall with liquid nails- subsequently it will be difficult to tear off, and internal stresses may occur in the wood, contributing to deformation.

Plinth from MDF

MDF skirting boards are produced from wood fibers using hot pressing. In order to imitate the wood structure, as well as to create various colors on the front side apply paper that is impregnated with dyes. A special melamine coating is applied over the paper for protection.

Photo: MDF plinth 83x14mm with cable channel

Advantages of MDF plinth:

ease of installation;
low price;
antistatic;
resistance to moisture and ultraviolet.

Disadvantages of MDF plinth:

subject to mechanical action;
fragility.

Mounting

To fasten the MDF skirting board, the clamps are initially screwed to the wall, after which the skirting board is put on them. Thanks to this fastening, they can be dismantled quite simply in the future. In the presence of small bends, they can also be fixed to the wall, since they have a certain flexibility.

Plastic plinth

This type of skirting boards is quite popular today. This is due to the fact that it is resistant to external influences, cheap enough and not subject to deformation. The shape of the plastic plinth can be embossed and straight. In addition, such skirting boards may have a flexible edge that fits snugly against the wall. In most cases, plastic skirting boards are disassembled into front and mounting parts. And the presence of a hollow structure makes it possible to hide various wires inside the plinth.

Photo: plastic plinth with a channel for wires

Advantages of plastic plinth:

resistance to temperature changes;
moisture resistance;
the presence of cavities for cables;
tight fastening to the wall and floor.

Disadvantages of plastic plinth:

fragility;
low strength.

Mounting

Installation plastic skirting boards to the wall is carried out on the mounting part using self-tapping screws or glue. Then a front plate is put on top, which is installed in the mount using clip-on grips.

Flexible plinth

This type of plinth began to be sold quite recently. It finds its main application if there are curvilinear boundaries of the floor and walls. Due to its flexibility, it takes any shape, edging various decorative elements and smooth curves of the room. Flexible plinth is made of plastic with slight changes on molecular level. To preserve its properties, it is stored in special packaging.

Flexible plinth can take any shape

Benefits of a flexible skirting board:

the ability to take the necessary form;
resistance to moisture.

Disadvantages of flexible plinth:

installation skills required;
relatively high cost.

Mounting

To install a flexible plinth to the wall, the fastening is initially made bearing profile using self-tapping screws. Then the front profile is heated with hot air or water so that it acquires a plastic state, after which the fastener segments are fastened. After that, the plinth hardens, providing a given shape.

Choice of floor plinth

In most cases, the choice of skirting board is carried out according to the following parameters:
- based on flooring;
- wall textures and colors;
- textures and colors of the door.
Sometimes, as a design solution, a skirting board can be chosen in contrast to the color of the floor and walls, but in this case you need to have a subtle sense of taste.
If the floor is to be laid with parquet, massive board, parquet board, then the best solution would be to buy wooden skirting boards in the same place and from the same manufacturer as the wood itself. In this case, there will be confidence that the shades and wood will match.
If you decide to use other coatings: laminate, linoleum, ceramic tiles, carpet, and so on, then it is advisable to choose the plinth after completing all the work with the walls and floor.
If you decide to choose a skirting board for the door, then you should consult with the designer, as this is a rather complicated option - you can make a mistake.
A relative innovation is the use of white skirting boards. Although they will look quite elegant, but in this case, many nuances should be taken into account: the combination of colors for furniture, floors and walls, and so on. To make the choice successful, it is advisable to draw the interior of your future room in the design program and try using different colors to figure out which tone will be the most optimal for you.
If your room is rather small and has low overhanging ceilings, then it is better to use thin skirting boards, which should be chosen to match the walls. They will stretch the room in height.
IN standard rooms optimally apply standard sizes skirting boards, which have a height of 45-70 mm.
If you are the owner of a large high room, then small thin skirting boards are contraindicated, as they will visually disfigure and change the geometry of the room. Here it is better to look at a wide skirting board in white or contrasting colors.

The plinth has two functions - it closes the seams between the floor and walls and gives the room a finished aesthetic look. This detail fulfills its tasks only if it fully corresponds to the purpose of the room and at the same time looks beautiful. The assortment of hardware stores is rich and varied, so it is not always easy to navigate. How to choose a skirting board for the floor? The rules are not that complicated. It is about them that we are talking about in our article.

First steps

Repair is serious business. Especially if you are going not just to re-paste the wallpaper and paint the doors, but decide to completely change the interior. And this means that all materials must be selected so that they are in harmony with each other.

Which skirting board to choose for the floor? It depends on a number of circumstances:

purpose of the premises;
the style you decide to follow;
floor and ceiling heights;
the size of the room;
general color range.

Purpose

The choice of certain materials for repair depends very much on the purpose of the room. This also applies to skirting boards:

In the living room, bedroom or nursery, they can be one of the most different materials- well, except that polystyrene is not suitable for floor framing.
But for the bathroom or kitchen, it is better to choose something that is not affected by high humidity.

Style

It's always better to stick to a certain style. Restrictions always narrow the search circle, which means they make life easier for those who started the repair. There are a lot of styles:

Classic;
Provence;
Baroque;
Retro;
High tech;
Modern;
Minimalism;
Ethno.

How to choose a skirting board for the floor according to the style of the interior? For the vast majority of styles, a wooden baseboard, painted or unpainted, is suitable:

For Baroque, Classic or Provence, it is better to choose unpainted, from some noble wood. But at the same time, it must necessarily harmonize in color with the floor covering.
For the Retro style, when the whole environment creates an atmosphere of the middle of the last century, only a wooden plinth is suitable strictly to match the color of the floor.
But for Modern or Minimalism, a metal bar is quite suitable.

Ceiling height

This is very important parameter! In a spacious room with high ceilings, anything is acceptable - a dark floor, a wide plinth, unexpected color combinations. If the ceilings are low, it is better to choose a light floor covering, then the room will appear larger and higher.

Important! Of course, there are options here too. If you are going to decorate your small living room in a medieval style, it is better to make a laminate and wallpaper under a stone, and close the joints with wide dark wood slats.

Too big room

If you want to visually reduce the space, it is best to choose a contrasting option. You will get something like a frame. But you have to be very careful, there are extremely unsuccessful combinations. Designers do not recommend combining:

dark purple and pale green;
bright orange (or golden) and pale blue;
blue and pink.

Important! In addition, there may be other not very pleasant combinations, when one color “absorbs” another. For example, pale yellow next to red will appear faded, and in combination with blue, the same shade will become bright and saturated.

Color spectrum

How to choose a skirting board - in the color of the floor or doors? The question is not as simple as it seems. In addition, other options are possible:

in the color of the walls;
in the color of the furniture;
not matching in color with any item in the room.

Skirting board in floor color

If you wondered what floor skirting boards are chosen for, and besides, you prefer a not too complicated design, it is best to stop at this option. It has a lot of advantages:

the frame is always in harmony with the floor;
you can pick up the plinth to the final finish, along with the flooring;
the rail in the color of the floor does not attract attention, which allows you to hide the mistakes that are inevitable for a novice designer;
the room seems a little bigger than it is, even if the floor is dark.

Color of doors and windows

This is a very interesting design decision, but it requires following some rules:

good if window frames will also be the same color;
shades must match completely.

This method makes it possible to emphasize beautiful windows and doors. It is very good if some other elements in the room are of the same tone. But it is necessary to choose the shades very accurately, otherwise - instead of original interior it will be something vague and vague.

Important! Plinth must be in harmony with door frame not only in color, but also in texture.

In the color of the walls

In this case, the skirting board is bought after it is completed. fine finish. The fact is that finishing materials, whether wallpaper, silk plaster or paint, are often on flat surface They don't look the same as they do in a jar or on a roll. You also need to know the shade that is on the wall, and choose the tone of the baseboard, which matches almost perfectly.

But other options are also possible:

plinth slightly lighter than the wall;
the plinth is slightly darker than the wall.

Important! These are quite dangerous options that require good color vision. Materials differ only in tone saturation, all other color parameters must match completely.

Let's talk about materials

In hardware stores you will find many types of skirting boards. They differ not only in color, but also in other qualities:

material;
size;
form:
the presence or absence of a cable channel.

IN special occasions you can even find a curvilinear one - but, as a rule, they make one to order. As for the materials, the following are used:

plastic;
wood;
ceramics;
polyurethane;
aluminum;
Styrofoam.

The answer to the question of which skirting boards are best for the floor depends not only on the style and purpose of the room, but also on the flooring.

Plastic

Comfortable modern material. Use it for such coatings as:

laminate;
linoleum;
carpet.

Important! Sometimes this option is also used for ceramic tiles, but this is more the exception than the rule.

Advantages of plastic:

large color palette;
variety of shapes and sizes;
does not rot;
not afraid of moisture;
practical;
easy to care for;
equipped with additional fittings;
in most cases there is a cable channel;
costs less than other materials.

There are also cons:

not environmentally friendly enough
not very durable;
short-lived.

Important! The fittings do not always match the color of the rail itself.

Wood

A classic, still very popular.

The main advantages of such models:

ease of installation;
environmental friendliness;
relative ease of care;
durability;
resistance to negative influences.

Minuses

The disadvantages include that:

At improper care the tree rots, so it is clearly not worth using such models in the bathroom.
The range is not as diverse as in the case of plastic.

Important! Fasten the wooden plinth with self-tapping screws. The rail of the desired length can be cut with the most ordinary hacksaw or jigsaw.

wood species

As for the price, it depends on what kind of wood the product is made of:

Pine;
Linden;
acacia;
ebony;
merbau;
dusia.

Important! The most popular wood is pine. It is relatively inexpensive, but the plinth is of high quality. Models made of linden or oak will cost more. On sale you can also find products from more expensive breeds, but this one is used mainly in the decoration of luxury housing.

What to pay attention to?

It is necessary to buy a wooden plinth very carefully. Pay attention to the following qualities:

wood class;
whether the rail is made from a solid array or glued from separate layers;
Are there any knots or chips?

Important! Wooden plinth is painted or varnished. In the second case, please note that ready-made it will be a little darker than in the store.

Veneer

This is also a wooden plinth, but it is made differently - not from whole piece, but from layers. The base is usually made of pine, and upper layer- from a noble tree. There are a lot of such models, they are extremely diverse in color and texture, and sometimes they are cheaper than those from a single piece.

MDF

If you have walls made of this material, then the answer to the question of which skirting board is better is obvious. It should also be made from MDF.

pros

These models have their own advantages:

does not burn out;
resistant to water;
easily and firmly mounted.

You can attach it in two ways:

"liquid nails":
on brackets using special clips.

Important! The first option is suitable if you are not going to use the plinth a second time - it is glued firmly, and you can tear it off only by damaging the rail itself. If you assume that this model will be useful to you in the future, fasten it to the brackets.

Ceramics

This material is now used literally everywhere, including in finishing work. If you are wondering which skirting boards are best for a tile floor, pay attention to ceramic models. They are designed specifically for edging a tiled floor:

Often it is sold together with flooring, in which case you don’t even need to think about how to choose a skirting board for the floor by color - everything has already been chosen, all that remains is to pay and take it home.
But such models can be bought separately, in which case it is best to choose the same tone as the main material or a little darker.

Important! Such a plinth can be laid not only along the joints of the walls and the floor, but also between the tiled wall and the upper edge of the bathtub.

Styrofoam

You can also find this one in the store. It is very cheap, but it has one flaw - it does not fit the floor at all. This ceiling plinth, a very good material when you can choose any shape and size, and even edging in the form of stucco molding.

Polyurethane

Expensive, but very effective material. Undoubted advantages:

environmental friendliness;
moisture resistance;
resistance to fungus;
durability;
ultimate ease of installation.

Important! The polyurethane baseboard can be painted as you like, and it is simply fixed with glue.

Aluminum

Strong durable products, relatively inexpensive. They are made from anodized metal. Undoubted advantages:

hygienic;
are not afraid of any detergents, including aggressive ones;
all models have a cable channel;
All models are equipped with fittings.

Important! Consumers believe that installation is somewhat difficult. Such a plinth is fastened with dowels to the wall.

We select by size

To choose the size of the plinth, you need to know:

room size;
floor and wall color.

Room size:

If you are thinking about which skirting board to choose for the floor when high ceilings, keep in mind, narrow slats in this case will look bad. As in a very spacious room with the usual height of the floors. Wide models are preferred, and a contrasting color rail can be used.
But in a small room it is better to fix the slats of medium width or narrow, but to match the walls.
For a standard room, options with a width of 4.5-7 cm are suitable.

Choose a color

First of all, the plinth should be in harmony with the floor. With everything else, too, of course. What is the gender like? Lots of options:

White;
Gray;
beige;
yellow;
Brown;
golden;
chocolate;
Orange;
Red;
the black.

Important! Other options are also possible. The only thing to avoid is bright flashy tones that can get boring very quickly. In old apartments, you can still find linoleum tiles of the most incredible red-blue-green shades, but it is better to refrain from such a design, it looks rustic even in retro-style rooms.

White

Lightness and cleanliness - any mote is noticeable on such a floor, so it must always be kept in perfect condition. The room seems larger than it is. The best part is that any other color is easily combined with this color, so the plinth can be of all shades that are in the world.

But you need to consider the color of other items:

window frames;
doors;
platbands;
lamps.

Gray

Noble classic color Plus, it's always trendy. You can easily find a gray skirting board made of any material. It goes well with many colors:

black;
white;
red;
blue
the color of the sea wave;
pink;
purple.

Important! If you intend to use bright rugs, then it is better to frame the frame to match the flooring.

Brown, beige, golden

The most popular "floor" colors. They are suitable for any style of room. The skirting board is best to take exactly the same color, but you can also experiment with different shades.

Orange, red, burgundy

Suitable for the style of the 70s of the last century. But it is quite difficult to select other finishing materials for such a floor covering. It is necessary to take into account the compatibility of colors - in particular, take only warm colors for the “sunny” or “sunset” floor. And in this case, it is especially important that the skirting exactly matches the color of the floor.

black or chocolate

An elegant option for a large living room or dance hall. Suitable for the loggia. But in the bedroom, such a coating should not be laid - dark tones tend to tire. The plinth can be of the same color, contrast or look like a bright frame.

A plinth is a strip that hides the gaps between the floor and walls. To date, they are made from a variety of materials that may differ in special qualities. So, for example, when you are at a loss as to which skirting board to choose, especially when there are many options available, both in wood and plastic, the choice can come to a standstill. We are ready to help you in this matter, so that for you there is no challenging task how to choose the right skirting board. The main thing is to understand the main differences in them.

For example, plinths made of veneer or solid wood are used to frame parquet or laminate floors. Some models have special channels for cables.

Wooden skirting boards have their own advantages and disadvantages. The main advantage of this material is its environmental friendliness, strength and durability.

The main advantage of skirting boards natural wood, it is environmental friendliness, high strength and durability. It is necessary to fix the skirting board to dry, even and clean walls. The main disadvantage of the material is its high cost.

If you have already looked at the photo of the plinth, you have noticed. What plastic products are serious competitors to wood. Moreover, they sufficiently replace wood and are incredibly popular on the market in their segment. That is why they deserve enough attention.

The production of these skirting boards is made from foamed PVC, and they are framed by linoleums and laminates, as well as carpets.

Outwardly, they are very similar to wood, from the rear they have a channel for fasteners, as well as a niche for the wire. To work with linoleum and carpet, skirting boards often have grooves in the front. This is very convenient and allows you to insert the same carpet, linoleum http://object-flooring.ru/NATURAL LINOLEUM. As a result, the color scheme of the floor will be the same. There are also plastic strips that are simply glued to the wall using adhesive tape on the back of the baseboard.

To date, the plinth made of plastic is an indispensable finishing detail. At the same time, they are predominantly better, in contrast to wooden products. They do not need to be further processed, the surface in them is smooth. In addition, such materials are resistant to the aggressive effects of chemistry, strong and durable, as well as aesthetic.

It's lightweight, durable and impact resistant. ultraviolet rays, moisture and oils, solvents. Since at temperatures from minus five and below, the material is more fragile, so you should use it only for internal frames. But if you heat it up to at least seventy degrees, it will be plastic and we will get the necessary shapes.

Thanks to modern technologies and development, installing skirting boards is as easy as shelling pears, no matter in which areas, even at corners.

How to choose a skirting board for a plastic floor? If we talk about the advantages of plastic panels, it is worth noting their highest degree of moisture resistance, resistance to corrosion and decay. In addition, even if there are sharp temperature changes in the room, the skirting boards will remain in the same state, without any changes. Due to this, such materials can be used in those rooms where there is enough high level humidity.

Well, if we compare this material with wood, then of course, the first one has less durability and strength.

On the other hand, plastic is easy to install, the mount in it is in an invisible part, that is, from the rear. The main thing is that there must be a flat wall.

Also one of the types that frame laminate and linoleum. They can also be used as the final stage in the decoration of the walls of the room, which are lined with decorative MDF panels.

Their advantages: low cost, resistance to high humidity, pollution, UV. They are not able to attract dust to themselves, as well as a completely hygienic material. Lay it only after the floor covering is laid.

The last step in finishing the floor is the installation of decorative moldings that emphasize the beauty of the installed floor covering and give a finished look to the room. Often this detail is considered a trifle that does not deserve attention. But as practice shows, it is from such elements that the overall positive or negative impression of the room is formed. Therefore, consider the criteria that will help you choose the right skirting board for the floor.

Floor moldings are thin strips prepared for painting or painted in the colors of popular finishing materials. There is no doubt about their functionality. The main purpose is mechanical, dirt and water protection of the joints between the flooring and the vertical enclosing structure: columns, walls, etc.

The range of products is extensive, therefore, in the store, consultants recommend choosing a floor skirting board by color from existing collections or brands. This statement has the right to life, but it is much more logical to start the choice with other parameters that can be called basic. Including:

the material from which the moldings are made,
profile format and height;
fixation method.

And only after determining the main indicators, you can proceed to color.

The first thing you need to pay attention to is the raw materials that were used in the manufacture. The most common, practical, easy to install and operate, waterproof products for private houses, apartments, offices are made of PVC. They are perfectly combined with all types of floor coverings: laminate, linoleum, parquet, engineering and parquet boards, carpet, even porcelain stoneware and ceramic tiles.

Varieties of plastic skirting boards:

mass-dyed rigid;
pigmented soft (flexible profiles);
finely porous white for subsequent coloring in the required shade.

Table 1. Advantages and disadvantages of plastic skirting boards

pros	Minuses
Good wear and water resistance.	Strong impacts can cause chips, scratches and dents that can be repaired.
There are two main types to choose from: one-piece and with a cable channel.	At first, skirting boards may emit an unpleasant chemical smell.
Ease of maintenance and ease of installation using original fasteners, self-tapping screws, dowel-nails and other types of hardware. Adhesion is allowed on "liquid nails" or any mounting adhesive for plastic with high strength initial grip.	Due to the fact that from time to time manufacturers change collections, introduce new types of fasteners for fittings, it is very difficult for buyers to find a replacement for connecting elements or profiles.
Wide range of colors - from 12 to 54 shades of one series, including textured and smooth products under wood, stone, marble chips.
Wide range of sizes: Height - from 36 to 96 m; Profile depth - up to 28 mm; The length, as a rule, is standard - 2.5 m.
The presence in the kit of a whole set of matching fittings: end caps, corners, connectors, various mounting adapters (boxes for a socket, antenna modules, etc.).
Durability. The minimum service life is 10 years or more.
Acceptable prices - from 50 rubles / piece.

Note that the shape of the molding can be different, it is chosen based on your own preferences.

The lower the ceiling, the lower the height of the molded products should be. A high plinth (from 70 mm or more) is recommended to be installed in rooms where the distance from floor to ceiling exceeds 3 m. Otherwise, they will look too “heavy”.

PVC products for painting deserve special mention, which can be tinted with enamels on water or oil based in any color that suits your interior. This type of profile is universal, made of foamed plastic, has a finely porous structure, so the paint easily "falls" on them both before and after installation.

No less reliable, but more resistant to all types of damage, wear and water, metal skirting boards, made of aluminum with anodizing or painting, less often - brass. However, they are produced in rather limited quantities and are not often found in stores. They are used in public, industrial and commercial buildings, very rarely - for design renovation in the style of hi-tech, minimalism in offices, living quarters, baths, bathrooms. Therefore, we will not pay attention to them, but move on to the next fairly common type of molded products - MDF skirting boards.

These profiles are recommended by wood flooring manufacturers as they have the same coefficient of thermal expansion as solid wood, parquet, laminate and other similar finishing materials. Skirting boards are produced in the following range:

With a clean surface for further self-decoration. You can simply paint them, or process them using any known wood finishing techniques, up to decoupage and pyrography;
Primed for subsequent painting with tinting varnishes and enamels (acrylic, polyurethane, oil);

Pasted over with a finishing film with a smooth or textured embossed surface. This kind of skirting boards is white, colored and even metallized.

MDF plinths have, as a rule, a milled (shaped) surface, less often a smooth straight or spherical one. Each manufacturer selects the dimensions himself, so the dimensions can vary greatly:

In length - from 1 to 3 m;
In height - from 40 to 150 mm;
Profile depth - from 10 to 20 mm.

table 2. Positive and negative sides of MDF skirting boards

pros	Minuses
Good wear resistance and strength.	It swells on contact with water, so dry cleaning is best.
Installation different methods: using glue "liquid nails", mounting strips, original clips, self-tapping screws, nails with hats or with the subsequent installation of decorative plugs.	Since the material is weakly resistant to surface damage, numerous scratches, chips, and dents may appear during operation.
Available in two types - monolithic and with a cable channel.	Due to the shallow depth of the profile, it may not be suitable for floor materials installed with a large gap from the walls.
A rich palette - up to 40 shades for wood, stone, concrete, cork, marble chips, etc.	High cost - from 100 rubles / rm. m.
Matching fittings are included in the kit.
Long service life - 10 years.

And finally, the last, but nevertheless the most luxurious type of profiles - from a solid array of pine, beech, oak, larch and other valuable species. Wood can be clean (for varnishing or toning), covered with protective and decorative compositions or veneered. The planks are usually solid, but some manufacturers form a small beveled cut on the wrong side at the bottom for cable routing.

Wooden plinth is perhaps the most beautiful and durable (with proper processing) type of profiles. Due to the natural texture, each molding is unique and inimitable. Ideally combined with wood flooring, including multi-layer (parquet, engineered board, panel parquet) and whole. At the same time, the surface darkens a little over time, acquiring a beautiful, noble shade.

Table 3. Pros and cons of solid wood moldings

Since there are no uniform standards for wooden skirting boards, the shape of the outer profile and dimensions vary widely. Therefore, this type of molding can be chosen for absolutely any interior, flooring, ceiling height, etc.

We have listed the most popular species. Of course, the range is not limited to this. So, for tiles, experienced craftsmen often form a plinth of ceramic or porcelain stoneware - they simply cut narrow strips that are fixed with tile glue. It turns out very neat and beautiful, especially in combination with suitable tiled corners or narrow PVC borders for joints. And lovers of stucco and heavy, voluminous decor on the walls, ceiling, make a choice in favor of polyurethane moldings with a carved surface.

Choice of skirting boards by color

Color preferences should be focused primarily on the palette of the room. Molding should be harmoniously combined with the overall style, and not spoil the impression of the interior. These simple rules must always be observed, otherwise the result will not please you.

Let's single out 6 main elements of interior decoration, under which a plinth is selected.

Flooring

Traditionally, sellers, manufacturers and even designers argue that the molding should be in harmony with the floor. I.e:

Perfect tone match. This is the simplest and most common solution. In this case, the coating seems to come a little on the wall. This effect looks especially interesting in rooms of a solid area.
Differ by 1-2 shades in relation to the dominant color of the floor. Suitable for small rooms, as well as for all modern interiors based on a combination of textures and colors of different groups.
contrast sharply. This technique allows you to “dilute” the interior a little and emphasize the beauty of floor or wall coverings.

For example, as seen in the photo below, parquet board or laminate in the White Oak decor, a white skirting board, in all shades of gray, as well as wenge or stained wood. And for linoleum or vinyl tiles under teak flooring, you can choose a molded product in the decor of mahogany, tobacco oak, dark walnut or contrasting ash, silver pine.

For coatings with a colorful surface, it is difficult to choose a skirting board. Therefore, it is worth stopping either at neutral shades of light wood with an implicit texture or purchase smooth products in white, gray, beige or black.

wall decoration

Some designers recommend choosing a skirting board in the color of the wall coverings in order to visually raise the ceiling a little and thereby increase the height of the walls. Of course, customers often object that in this case the plinth is not needed. But this is an erroneous opinion. Molded products in this case will help not only protect the edges of floor and wall cladding from damage, but also give some volume to the structures.

Note that here you can "play" with the color of the skirting boards. For example, buy moldings in neutral shades or 1-3 tones lighter / darker.

Door leaf or architraves

In the last 10 years, manufacturers of plastic, wood and MDF skirting boards have been producing entire sets of skirting boards in a single color scheme. Therefore, it is quite possible to perfectly match or paint the moldings to match the trim or canvas. Visually, it seems as if the plinth wraps around the door without breaking a single line. It looks especially beautiful in cases where all elements have an identical or similar texture for a wood pattern, even if it is not pronounced. You can experiment both with ordinary architraves (straight or spherical), and with carved, paneled portals that are so fashionable today.

Often, buyers are interested in the question of how best to choose a plinth - under the floor or under the door. Of course, under the floor covering is easier, but in any case, all components of the finish should be in harmony.

Furniture

Perhaps this combination can be called one of the most extraordinary. In this case, moldings are recommended to be selected for the largest or central piece of furniture. For example, if kitchen set has a monochrome surface, then they will look good:

matt or metallized skirting boards in universal shades: silver, bronze, neutral beige;
painted in the color of the facades;
covered protective composition 1-2 shades darker/lighter;

And for furniture under the array in the bedroom, hallway or living room, you can choose PVC or MDF moldings similar in texture and color. FROM wooden skirting boards more difficult, because when varnishing natural material slightly changes color.

We would like to remind you that only a professional decorator can competently arrange all the elements, so you should not get carried away. If your experience in interior design is small, then it is better to choose a skirting board to match the color of the floor or doors.

window frames

A non-standard, but very interesting combination that will emphasize the texture and color of the frames. Due different heights installation, an interesting geometric effect is obtained, concealing irregular shape premises. In addition, such a frame will draw the eye to the window itself, or rather, to the landscape behind it.

In order not to “kill” a positive impression, you need to carefully select the fabric design for the opening. It is best to dwell on blinds, Roman or Austrian curtains, pleated or marquise textiles.

Dominant decor

Modern interior styles call for abandoning boring monotony. Even classic english interior with prevailing beige, you can “dilute”, enliven thanks to “highlights” - bright accent elements. And this refers to the color, texture, volume and even the degree of gloss of different surfaces.

The dominant detail can be a rug or a huge clock in a contrasting color, embellished with glossy sequins. sofa cushions, volumetric wall decor etc. Correctly selected moldings will “support” the interior accent, diluting the rest of the design.

In conclusion, I would like to add that a skirting board, selected without reference to any element of the interior, is a direct path to disharmony. To keep all proportions will help such useful tools, like the designer's color wheel, as well as articles and videos about combining different shades.

Advice! If you need repairmen, there are very convenient service according to their choice. Just send in the form below detailed description work that needs to be done and you will receive offers with prices from construction teams and firms. You can see reviews of each of them and photos with examples of work. It's FREE and there's no obligation.