DIY crafts from car tires. DIY crafts from tires: instructions on how to make interesting decorations and landscaping elements (105 photos)

A summer cottage is a great place to bring extraordinary ideas to life.

Hosts country houses They try to improve their territory and use unnecessary things to create compositions, which after restoration become a decoration of the site.

This and kitchenware, And antique furniture, multi-colored lids. They will help you add some zest to your landscape design. car tires.

Craftsmen are very creative, so they make flower baskets, swings, swimming pools and sandboxes for children from tires.

An example of using tires - a homemade pond

If you get a little creative, you can easily create a garden path with your own hands on a plot of old tires.

Pros and cons of using tires in path construction

The advantages include:

The main advantage of rubber is high quality . Despite its service life, the tire remains resistant to temperature changes and can withstand any precipitation well. Doesn't get worse appearance and from an increase or decrease in temperature. Therefore, in the arrangement garden path Tires occupy the main place. The equipped path will not crack under the influence of frost, will not get wet under heavy rains and will retain its shape in the hot summer.
Behind the tracks easy to care for. You just need to sweep away the debris and water it with a hose from time to time.
Road made of car tires – safe way site arrangement. Even after a heavy rain, the rubber dries quickly, and it is almost impossible to slip on it.
Easy to create with your own hands, perhaps, is the main advantage of a garden path made of tires.

The only drawback of such material is that it is required a large number of. But this is not a problem either, because you can go to a service station for unnecessary tires.

Ways to use tires

To create paths in your summer cottage, you can use 2 options:

arrangement with the help car tires;
usage rubber tiles, which is obtained during the processing of rubber tires.

Path-ladder made of car tires

A ladder path is suitable for arranging uneven territory.

For example, along such a path it will be convenient to go down to the pond located in the background of the site.

Depending on the functional load of the stairs, you can lay out the path in 2 rows.

For the manufacture of original staircase it doesn’t take much time, and this is perhaps the most budget option.

Manufacturing process

The tires are laid flat on the ground, starting from the low part of the site and going up. To make the tires stable, they should be sunk slightly into the ground and soil should be poured inside the holes.

Advice! In rainy weather, this path can become slippery, so it is recommended to sprinkle it with gravel.

The ladder path absorbs well. Walking on it is much more pleasant than on asphalt or concrete steps. During movement, the load on the joints is small, so fatigue in the legs will not be felt.

We build it at the dacha using our tips and step-by-step instructions. More details in the article.

Coniferous tree larch: planting and care, as well as tree propagation. about larch requirements for soil composition and other nuances of cultivation.

Garden path made of rubber modules

This track is convenient and practical to use. It is laid out like a puzzle.

At any time, the rubber modules can be moved to another location or their inclination can be changed. This will result in a new design.

Path made of rubber square tiles

To create such decorative path you will need to buy rubber tiles.

Of course, making a track will cost you a little, but it looks much better and more original than a strip made from a tire.

Laying rubber tiles

The manufacturing process does not take much time. You can simply lay out rubber tiles in a checkerboard pattern directly on the grass. Squares can be pressed down with decorative stones anywhere.

Over time, the tiles will lie to the ground, and the beautifully protruding grass will harmonize with the overall design. The video below explains how to cut a tire.

Path made of rubber rectangular tiles on a concrete base

From rectangular tiles you can arrange a path near the pool or around the fountain.

The same car tires are used in the production of “rubber mats”. The performance properties of the tiles are no different from tires; they also last a long time and do not slip.

And most importantly, with their help you can diversify the design and create a unique composition.

There is nothing complicated during installation. It is secured using special locks or bushings. When constructing a path from rubber tiles, you need to take into account one nuance: the thickness of the material.

Tiles whose thickness is less than 20 mm should be mounted on a solid base: cement screed, wood flooring or asphalt surface.

At the very beginning, it is necessary to level the base, fill in all the depressions and remove bulges, cover up chips and crevices, the appearance of which was caused by external factors.

To treat the base, mix acetone and polyurethane glue, taken in equal quantities. Well, then, just your imagination.

When making a track, proportionality should be taken into account. There should be equal distance between the tiles. The space can be filled with crumbs. It will look beautiful if the path is made in the same style.

But not less interesting option It will happen if you fill the space between the tiles with multi-colored pebbles.

Do-it-yourself track creation technology

Every summer resident dreams of beautifully decorating the paths between the beds, or the approach to the parking lot, so that it is convenient to walk along them even in rainy weather.

It’s uncomfortable to walk on boards, and they don’t look nice; linoleum is a bit slippery, and slate can crack.

Therefore, to create a track you need to choose specialized rubber that will last longer than all these devices.

Tools and materials for work

You will need:

car tires of the same size;
sharp knife or jigsaw;
oil or soap solution;
wooden beam ok, a pry bar or an adjustable wrench.

« Changing tires is not the most pleasant experience. Especially when I didn’t plan to do it and wanted to hold out on the old one for another season!” - says my husband. But unforeseen circumstances happen, and buying new tires does not mean that you need get rid of old tires! And this was proven by our neighbors in the country, who used the tires wisely.

Aunt Zina once took several old tires from her husband’s garage and began experimenting. And this process fascinated her so much that within a month, friends began to flock to their garden to look at this miracle.

Tire crafts for the garden

And indeed, decorate your summer cottage or the courtyard near the house can be covered with ordinary old tires. Many masters make real masterpieces out of them!

In addition, in our country, recycling of used tires is not yet at a high level, and we can see piles of tires thrown directly onto the street. But you can combine business with pleasure and create jewelry for summer cottage, DIY gardening, these crafts will be both functional and beautiful.

Editorial "So simple!" I have prepared 15 ideas for you, how to recycle old tires for decorating the garden and home.

Tire crafts

The most simple idea- use tires to create a small flower bed.
To do this, leave the tire as is, just decorate it brightly and fill it with earth. Nothing complicated. Even an elderly woman or child can cope with this, and such a flower garden will look wonderful.
Or you can put the tires on top of each other and make seats and armrests from the scraps of the top part of the tire.
Stylish and unusual decoration for garden!
An original place to relax in the fresh air.
Flower beds made from old tires in the form various items They do it this way: the tire is cut into two unequal parts and the larger one is turned inside out.
It is worth noting that the edges of tires can be made various shapes, it’s all just a matter of imagination and sleight of hand. Using this technique, flower beds are made in the form of a mug, flower, or vase. A huge rubber cup made from tires looks very funny. And some craftsmen thus build an entire tea-set.
Or you can turn old and unnecessary tires into a wonderful space for children to play!
Another idea - figures of animals from old car tires. They will create the mood in the garden or garden.
What can you say about this original sink?
Have no doubt: everything that is done for children is the most important. In the simplest version, you need to pour sand inside a large wheel - and you get a sandbox. A painted wheel, and even with a pattern, will decorate the site.
And by installing an umbrella in the sand, we get an option for little VIPs. For them, we put insulation on the inner rim of the tire for water pipes so that kids don't get scratched.
Tires make great chairs!
An unusual idea for a fence - tires laid on top of each other, sprinkled with earth and planted with climbing plants.
Children will be indescribably delighted with such a wonderful swing.
Original staircase to the house.
You can also make shoe soles from old tires!
I really like this low one coffee table with glass. Simple and stylish, isn't it?

It's always nice to make something beautiful and useful out of a junk item. A good example such creativity - beautiful flower beds made of tires. They are not difficult to build, but their benefits are enormous. But the imagination of dacha masters is not limited to this. From old wheels, which often just lie on the road and pollute environment, they make outdoor furniture, sculptures for the garden and even rebuilding small children's towns.

Such a simple and unsightly material at first glance, like old car tires, in fact, seems to be specially created so that every summer resident can feel like a real artist and decorate his plot with real designer flower beds and original author’s sculptures. Without exaggeration, you can cut anything out of tires. Such crafts are on par with those made from plastic bottles all year round will delight the eyes of the owners and guests of the dacha, and most importantly, will not require special financial investments.

It’s also nice that the benefit of the idea of making crafts with your own hands from tires is double: on the one hand, we recycle a wheel that polluted the environment, and on the other, we get an original one. garden decoration or a flower bed.

Crafts made from used rubber tires amaze with their variety and the richness of the imagination of their authors. Here are the most common ones:

In the photo - flower beds made from tires

A small flower bed. The easiest way to make flower beds from tires is to leave the tire as is, just decorate it brightly and fill it with soil. Nothing complicated. Even a weak woman or child can cope with this, and such a flower garden will look wonderful.

This photo shows cups made from old wheels.

Flower beds made from old tires in the form of various objects. Make them more difficult. The tire is cut into two unequal parts and the larger one is turned inside out. It is worth noting that the edges of tires can be made in various shapes, it’s all a matter of imagination and sleight of hand. Using this technique, flower beds are made in the form of a mug, flower, or vase. A huge rubber cup made from tires looks very funny. And some craftsmen thus build an entire tea set on their site.

Turtle made from old wheels

Flower beds and sculptures in the form of animals and fairy-tale characters. A funny frog made of tires, a kind gnome, a mysterious unicorn, beautiful swans, a three-headed dragon, a turtle, a luxurious carriage, a huge telephone - it’s easier to list what they don’t do from this available material. The only condition is to think through the composition from the very beginning, so that there are no unpleasant surprises later.

In the photo - multi-tiered flower beds for flowers or berries

Multi-tiered flower beds made from several tires. The simplest one to make is a three-tier one, but the number of parts can be greater. Several tires of the same or different sizes are placed on top of each other or in a checkerboard pattern. A tire well looks impressive, stylized to look like a real one and equipped with all its inherent attributes: a chain, a shaft with a visor, a bucket. This flower bed can also be used as vertical bed for growing berries and vegetables.

Tire beds for strawberries

A strawberry bed made from tires will take up minimal space and give a rich harvest. It is also perfect for growing seedlings, herbs, and peppers. From such a flower bed you can make a fence for a raspberry or currant bush, or make several of them and use them to delimit the garden into cultural zones. It is also worth mentioning that a well made from tires is often made not only decorative, but is also used to disguise it. drainage hole or septic tank.

Experienced craftsmen and craftswomen know many secrets that help them create garden sculptures and flower beds made from tires with your own hands. They understand better than anyone how to make unique and inimitable handicrafts from old, useless trash. Here are just a few of these secrets:

Imported tires are best suited for the job, as the rubber on them is softer and easy to cut. But in their absence, domestic products will do. In principle, they are quite easy to process and allow you to make crafts from them different shapes.
Tires intended for use in conditions winter roads, more pliable, easier to cut and easier to process than those used in summer.
The longer the tire has been used and the more it is worn, the thinner, softer it is and the easier it will be to work with: cutting and turning.
Before you start creating a craft, the material needs to be prepared: thoroughly cleaned of dirt, and degreased before painting.
To cut car tires, use sharp knife, with a thin spine. You can check how well it is sharpened by running the blade along a notebook sheet, holding it suspended. If the knife does not cut or tears the paper, it is not sharp enough.
Cutting a car tire for garden crafts It’s more convenient if you periodically lubricate the knife with machine oil. This will make it easier to fit into the rubber. Used oil will also work.
When you need to cut out some shaped elements, markings are applied to the tire. It will help you achieve a more accurate and accurate result. It is most convenient to apply it with ordinary white chalk, or, in extreme cases, with a marker.
The durability of the craft depends on what paint you use to paint the rubber. Suitable for old wheel tires: car paints, as well as any paints for street work.
Before painting the tire, it is recommended to prime its surface. A primer with the addition of a small amount of PVA will increase the strength of the coating and reduce paint consumption.
Paints in aerosol cans speed up the painting process to 20-30 minutes, and the painted layer itself is made more uniform.
Decorative finishing can be made from scrap materials. For example, cover the surface with pebbles, bottle shards, or lay out pictures from colored plastic bottle caps.

It is better to paint a flower bed from a tire not only from the outside, but also from inside. This way they will look more aesthetically pleasing, and the black rubber will not be visible from the inside.

Of course, every master has his own secrets, and it is impossible to list them all. And when you take up this fascinating business - tire sculpture, you will certainly have them too.

Several master classes on making crafts from old tires

As mentioned above, crafts made from tires are varied. Their appearance and purpose are limited only by the imagination of the master. We invite you to familiarize yourself with the basic models. After reading them, you will learn how to make a flower bed from tires with your own hands and you will be able to create original, unique and useful garden accessories yourself.

A simple flower bed in the shape of a flower

A small flower bed made like a daisy from one tire is the simplest basic model. You can make several such flower beds, arrange them sparingly and decorate the approach to the house. Sometimes they are placed on asphalt or tiled areas.

We will need:

One old tire.
Sharp knife.
Marker or chalk.

Mark the cut location with a marker. We will cut the tire along them, from thickening to thickening.

Before cutting tires, make sure that they do not have metal cords that could damage the knife. They are usually inserted into truck tires.

We cut the tire along the entire circumference with even zigzag petals of any shape of your choice (triangular, oval, semicircular).

We turn the tire over and work with its reverse side. Moving the knife along the thickening, we cut out reverse side tire circumference.

Then, along the entire circumference inside the tire, approximately every 20-25 cm, we make transverse cuts from the cut edge to the bend (end of the tread).

After this, the tire needs to be turned out. The flowerbed is ready. All that remains is to paint it, giving it a more attractive look, fill it with soil and plant plants.

For greater clarity, watch the following video:

Garden flowerpot from an old wheel

From the old wheel a short time you can make a beautiful garden vase.
Such flowerpots look better in pairs in front of the house, on opposite sides of the door or porch. Let's look at a step-by-step master class on how to make them.

We will need:

Tire with disk.
Sharp knife.
Chalk or marker.

Using chalk or a marker, mark a zigzag line along the entire frontal circumference of the tire, along which we will begin cutting. Thanks to her, the flowerpot will look like large flower with many petals.

Cut the tire along the marked line with a sharp knife. To facilitate the process, the knife is periodically dipped in machine oil (used oil will also work).

After the wheel is cut, we check whether there are any uncut sections left and proceed to turning it out. It is better to do this together with an assistant, slowly, in parts.

After we managed to turn out the tire for the future flower bed, it turned out that there was a tube in the wheel. It needs to be cut out and thrown away.

The flowerpot is ready. Its bowl was made from the main part of the wheel. There is no need to remove the disk from the tire. It serves as a raised platform and stand for the vase, and the remains of the tire at its base provide additional support.

All we have to do is clean, degrease and decide how to beautifully paint our new garden vase. When you pour the earth into the bowl, do not forget to put a gasket on its bottom so that the earth does not spill out and make several holes in it to drain the water.

Video instructions for making a flowerpot:

Swan from an old tire

The most popular garden sculptures made from tires are swans. They are usually placed near artificial pond, which gives the site a stunning look. You can plant grass in the bird itself, then it will seem that it is peeking out from behind the vegetation. Detailed information will help you make it step-by-step instruction with photo.

We will need:

Sharp knife.
An electric drill for making holes for a knife to fit into the rubber.
Sander or file.
Jigsaw.
Chalk or marker (preferably a marker).
Wire 5-6 mm in diameter (rigid, to give the shape of a “swan” neck).
Plastic clamps (to shape the head).
Roulette.
Gloves.

According to the diagram, we mark the contours of the future swan on the surface of the tire using the following video, in which the author uses dimensions in inches, calling them inch in the international measurement system. Inch (1 inch) = 2.54 cm.

How beautiful and neat our sculpture will turn out depends on the accuracy of the markings.

Let's start cutting. At the initial section, we drill 3-4 holes at a distance of 3-5 cm with a drill and cut the tire between them with a knife. We insert a jigsaw into the resulting cut and begin to cut out the swan.

After all the contours are cut out, turn the tire inside out. We try to do this carefully, since careless movements in the thinnest places can tear it.

To make the bird’s figure look more neat, we smooth all the cuts along the contour with a sander.

To shape the swan's neck, we insert a wire into it. To do this, drill holes in the center of the neck and to the end of the body every 20 cm. We apply the wire and secure it in the holes with soft staples.

Forming the head. We make longitudinal cuts and holes, as shown in the photo, and using the same wire or plastic clamps we give the swan’s head the shape.

Our tire swan is ready. All that remains is to paint it and make a stand.

The swan can be painted in White color or not paint at all, leaving it black. We make the beak red. Swans look very beautiful in a pair: black and white.

Without stand soft rubber swans they won't stand. You can simply take any tire and paint it, for example, blue. Thus, it will symbolize the pond. Or you can take the time to make it curly.

We make the figured stand in the same way. We mark the outline on the tire along which we will cut, cut the tire along it, turn it inside out and paint it.

Using a similar technique, you can make any shapes from tires: animals, birds, fairy-tale creatures.

But, if you don’t want to bother with complex markings and cutting, you can do it simpler. For example, assemble a cute frog from whole tires.

In the photo - a flowerbed in the shape of a frog

Making a frog from tires is very simple. The body and head are assembled from one or several larger tires, eyes are assembled from small wheels, for example from a baby stroller, and paws are assembled from rubber scraps.

Flowerbed chamomile

It’s hard to come up with a decoration that’s easier to make than this flowerbed. Despite the fact that it requires several car tires, it can be assembled in literally 15-20 minutes, it looks nice, neat and will never be out of place.

We will need:

Three old tires of the same size.
A sharp knife or grinder.

We cut all the tires in half, having previously marked the cut locations. Before cutting, find out if there are metal cords in the rubber. A knife won’t take them, so use a grinder.

To give the future flower bed an aesthetic appearance, you can paint the tires. It is better to do this in advance, immediately after cutting.

Why are crafts made from tires and tires so popular? Many owners summer cottages They try to make them look aesthetically pleasing and well-groomed using crafts made from tires. However, in order to improve and decorate the territory of the dacha, free time and Money. As for the financial side of the issue, there is a wonderful way to improve your dacha area without special costs. We are talking about crafts made from old car tires. To implement it you will only need a little free time, creativity and outdated car tires, which can easily turn into fairy-tale swans, giraffes, horses, turtles, snails and other interesting characters.

How to make crafts from tires and where to get tires

In addition to free time, imagination and old car tires, in the process of making such crafts you will need multi-colored paints, brushes, knives, ropes, chains, and a shovel. You need to prepare all this in advance, and also decide what exactly you want to do. It should be taken into account that in this case it is better to use tires from foreign manufacturers, since domestic ones are harder and more difficult to turn out, and also that summer tires are more difficult to turn out than winter ones. In general, fake tires are easy to make with your own hands; you just need to be patient and imaginative. You can look for the tires themselves near any large tire shop in your city - they are often simply thrown away there.

Flower bed made from car tires

Any summer cottage is transformed by flowers, illuminating everything around bright colors and the most delicate aromas. Flowerpots made from tires will help bring order to the flower garden and give the flower beds a well-groomed appearance. They are made quickly and simply, but at the same time they look very attractive. The flowerpot is made of a tire with a disk. It is necessary to lay it horizontally and draw a zigzag pattern around the disk with chalk. Next, cutting is carried out along this marking with a sharp knife. To make this task easier, it is recommended to soak the knife in water. The tire is then carefully turned inside out. If the tire is thick, you may need outside help. After the tire is turned out, it must be turned over, washed thoroughly and coated with paint. Next, the finished flowerpot is filled with earth, and your favorite flowers are planted.

You can simplify the task and not cut out the flowerpot, but simply wash and paint old tires and make a whole flower bed out of them. This flowerbed looks bright and impressive.

Video: DIY tire flowerbed

Functional crafts made from tires

These crafts include items that can be used in everyday life. So, for example, from old tires you can make garden tables and stools. Covering them with paint natural shades, they will harmonize wonderfully with the surrounding landscape. You can also make ottomans from car tires, coffee tables For country house or garden washbasin.

Furniture made from tires - 14 photos

As we wrote above, you can easily make garden furniture from old tires. Of course, not everyone will agree to sit on rubber, since in the heat of summer it may not be very pleasant for the body. But if you color it in bright colors- it will look really chic. And also you can use Additional materials, for example, put sofa cushions on chairs and benches from tires for greater comfort, and use a rope to make an ottoman from old tire. By the way, more ideas for country house alterations from old things you can read here.

And here is a step-by-step master class: how to make a stylish ottoman from a tire and a rope with your own hands

Video: furniture made from tires - DIY crafts for the garden

Animals and fairy-tale characters made from tires and car tires

Such crafts will certainly enliven your summer cottage and bring a lot of positive emotions, especially to your children. One of the most popular tire crafts for the garden is a swan. To do this, you will need a tire without metal cord - it will be easier to cut. The cuts must be made according to the previously prepared markings on the tire with a sharp knife. The neck of the finished swan can be strengthened with an iron rod. On final stage paint finished frame matching paint colors.

It won’t be difficult to make a funny giraffe, zebra or horse out of old tires. To do this, you need to dig a tire and a small wooden beam into the ground, paint and decorate the blanks in such a way as to convey the characteristic external features specific animal.

Also, outdated car tires and an old enamel basin can easily turn into a fairy-tale frog or turtle.

Crafts made from tires are an easy and economical way to decorate your summer cottage. Sleight of hand and a creative approach will allow you to create beautiful and funny compositions.

Video: DIY tire animals

Crafts from tires for the garden - photo

There are so many crafts made from tires to decorate a dacha. Finding old tires is not difficult, just go to several tire shops, choosing a time when everyone goes there to “change their shoes” for the summer or winter, and you can reap a very rich harvest. And then detailed information is at your disposal. step-by-step master classes on making complex crafts from tires like a swan or a parrot, or just look at a photo - how to make, for example, a bear, a frog or a ladybug.

Country crafts from tires: 30 photos

You can also make furniture from old tires - benches and chairs, ottomans and coffee tables and other things. But what is most valued in such things is originality, so we have collected for you the most interesting photos what can be made from tires. We liked the bright and cheerful yellow minion of three tires, as well as a ladybug, a frog princess and large crafts from several characters using additional things such as a wheelbarrow and others garden tools- such a composition can decorate both your dacha and garden.

Elvira Goleva for Decorwind.ru

You can decorate your summer cottage or just a courtyard near your house with ordinary old wheels, and many craftsmen make real masterpieces with their own hands! Indeed, in our country the recycling of used tires is not highest level, and we can see a lot of tires thrown right onto the street. But you can combine business with pleasure and create crafts - decorations for your summer cottage, garden, or vegetable garden with your own hands. Let's look at a selection of photos of crafts made from tires:

We use tires in the garden

With the help of paint and imagination, you can create your own real work of art. There can be a lot of options for making flower girls; we will look at the master classes themselves in the following articles, but now let's look at the southern exotic - the palm tree:

DIY tire tree tree

Crafts on the theme of southern holidays are very popular with us; we have already published an article that described its production in detail. Except exotic plants You can also create African predators:

Tire crocodiles

Decorate your garden with tire crocodiles

Such animals can not only inspire admiration, but also scare away unwanted guests... They are really made very beautifully and believably.

Elephant made from an old tire and inner tube in the garden

Colorful blue elephant, all from the same southern African countries, will look very good on the playground. Here are a couple more examples of these wonderful inhabitants of Africa:

By painting a tire correctly, you can create your own zoo from a wide variety of animals from all over the world. And all you need is desire, a few tires and a little imagination. Here at someone’s house a tire was turned into snails and a black and white zebra:

Snails and Zebra: crafts from tires for the garden

You can come up with fancy birds to decorate your garden; for example, a parrot can be a good home for flowers:

Parrot and swans: homemade products from an old tire

For bird lovers, you can make these fun crafts:

Birds - crafts made from tires for the country garden

The pet birds turned out very wonderful, they don’t even look so impressive!

Turtles from a tire

“Auto” turtle from a used car tire

Car tire turtles

How about a cup good tea?? You can also make a “tea set” to decorate a flower garden; such a cup will be difficult to pick up, but it looks great!

Tire crafts for the patio

For a complete tea set, these cups need a good garden furniture, here are just suitable samples from a tire:

Old tire as furniture

The furniture turned out to be truly original, although it cannot support the weight of a person on its own, so the frame must be made of a metal structure.

Playground decorations using a tire

Fairy-tale animals can decorate both your playground and the area near your home. Few people will be able to pass them without smiling, and children will be most interested in such figures.

Funny horses