PVC tubes have proven themselves very well not only in plumbing, but also in summer cottage. In today's selection I want to offer you 27 handy ideas crafts that will make your country life easier. For example, in the first photo there is a comfortable greenhouse frame, a thick tube in the base, insert thinner pipes, and stretch agrofibre on top.
Lightweight summer tent canopy made of pvc
Idea simple lung in assembling and disassembling the sun canopy, which can be unfolded in a few minutes. Two arcs on which the awning fabric is stretched, and a transverse pipe - a spacer. And now you can sit in the shade or take shelter from the summer rain.
Deep watering during drought
In hot weather, it is sometimes pointless to water plants from above, since the moisture simply will not reach the deep roots. By installing a PVC pipe with a drilled holes, you will deliver life-giving moisture directly to the roots.
Tool holders made of pvc pipes
This simple device will help you always keep your tool in a vertical position, convenient for use; you can easily pull out a rake, fork or shovel without experiencing any inconvenience.
Bed with arcs made of PVC pipes
Convenient greenhouse bed, PVC arcs are inserted into wider diameter holders screwed to the corners wooden frame beds. Comfortable spring easy option greenhouse for greenery.
Greenhouse idea made from PVC pipes
However, not only a greenhouse, but even a greenhouse can be made with your own hands from PVC. Using fittings, you can give the greenhouse the required shape and connect all the frame elements together.
Comfortable chairs for weeding made of PVC pipes
Often, working in the garden requires staying in a bent position for a long time, so for weeding, for example, a chair like this will be very useful. The dimensions and height can be adjusted to suit you.
Feeder for chickens made of PVC pipe
Your chickens will always be able to get food, even in your absence at the dacha, if you make these long-term feeding feeders. By pouring food into the cavity of the pipe, you can easily go to the city on business, even for a few days, without fear that your pets will remain hungry.
Device for planting seeds
You can plant seeds without even bending down if you make this original seeder from a PVC pipe. Please note that the seeder has one more advantage - it is incremental, that is, when planting a seed, you automatically mark the location of the next planting spot.
Feeder - milker for goats
With this device you can milk and feed your goat. The height of the podium is such that you can milk without bending over, just sitting on a stool.
Aviary for chickens made of PVC pipes
An original aviary for your chickens during the summer period. From time to time, the aviary can be moved from place to place so that the bird always has green grass.
Hose holder
Convenient holder for a garden hose. The device can be stationary or mobile, with wheels for transporting the hose around the site.
Tomato holders
A frame that supports tomato trunks is a good option for those who grow tomatoes in open ground.
Trellis for cucumbers made of PVC pipes
And this is already an option for trellises for cucumbers growing in the garden.
And here is another version of a trellis that will support the vines of cucumbers.
Tower for growing strawberries
There is a method of growing strawberries in towers made of PVC pipes, covered with soil, with holes in which strawberry rosettes are planted.
Pencil case for country small items
So that all sorts of little things do not get lost and are always in one place, make a pencil case for them from a PVC pipe with a screw-on cap.
Greenhouse for beds and flower beds
Such a mobile greenhouse can be used to protect young plantings from night frosts. During the day, you can remove it to the beds, or open only the upper part.
Small items holder
An original idea for a holder for various kinds country little things. From short scraps of PVC pipes you can make a stylish structure in which small belongings will be perfectly stored.
Rack made of PVC pipes for a summer residence
PVC pipes can also serve you as a basis for a country shelving. Shelves can be made from both wood and chipboard blanks.
Country car
Some homemade products are so original that it’s fitting to give them an award for originality and convenience. In such a cart you can transport hay, compost, bags, and some garden cargo.
Drinking bowl for chickens
Drinking bowl idea for poultry from PVC pipes. Nipples for drinking bowls can be ordered on Aliexpress, where they cost pennies, unlike in stores.
Rack for boxes in the pantry
A spacious rack for storing boxes with things can be made for both the garage and the utility room.
System drip irrigation for cottages made of PVC pipes
The photo shows the idea of a drip irrigation system for a summer residence. You can select the required cell size, or distribute the pipes in parallel, including in the system flexible hoses from IVs.
Bird feeders
An original bird feeder made of thick PVC pipe. The principle of the feeder is such that the food can be poured in for a long time and the birds will always have the opportunity to have a snack at a convenient time.
Carved PVC pipe lamp
Very nice idea- make a lamp for solar powered from carved PVC pipes. In the evening, the lamp will illuminate the space of the pipe from the inside, and we will observe a floral pattern.
Seedling germinator
The idea behind this seedling germinator is that there is water with nutrients in the pipe.
Roof and gutter cleaning device
By connecting the hose to the PVC pipe extension, you can wash the roof, clean the water drainage gutter, etc.
And in winter, you can use a PVC pole to clear the roof of snow.
That's all I have for today! I hope that these ideas for crafts and devices made from PVC pipes for your dacha and private home will help you in your household!
IN summer heat, after working in the garden beds or active games with children, nothing compares to the freshness of a summer shower. A small neat building on a sunny spot or just compact device on the wall country house is a temporary replacement for a bathroom.
We will tell you how to build a summer shower with your own hands. The article we presented describes in detail all types of structures popular among summer residents. Instructions are provided for constructing homemade shower stalls that increase the level of comfort of country life.
The design of a shower for a dacha, which is usually installed near the wall of the house or at some distance from the building, is quite simple. Usually it comes down to a “volumetric tank + faucet-watering can” set. The tank is mounted on roof of the lung buildings, and the watering can should be no higher than at arm's length.
But we will move away from the primitive designs of a summer shower and consider various models, differing as external design, and the method of water supply.
Curtain on a metal frame
Simple and budget solution– product frame type. It consists of a metal frame, in the upper part of which a water tank is attached. The container can be made from a barrel, but factory models are most often initially equipped with a flat tank with a volume of 100-200 liters.
Water enters the tank in two ways: pumped from a water supply (well, well) or carried manually in buckets. The second method is labor-intensive, but sometimes it is the only possible one.
Great solution for reception water procedures V summer period– mobile cabin with shower and washbasin attached with outside. The function of a water storage device is performed by a plastic barrel securely attached to the top.
The metal frame can be sheathed with sheets of polycarbonate, plywood or corrugated sheets and equipped with a door, then it will turn into a closed shower stall. It can be easily transported from place to place and installed where it is currently needed: in the garden, in the garden, near the house, summer kitchen or swimming pool.
With the technology of constructing a summer shower covered with polycarbonate sheets, dedicated to the analysis of options and the construction of similar structures.
Light wooden structure
A building covered with clapboard, boards, timber or siding is a more serious decision. If the project is expected to last several years, it is recommended to make a foundation that will ensure stability and reliability. Sometimes it's enough metal racks, dug into the ground, on which the entire structure rests.
Lightweight semi-open portable model assembled from thin wooden planks, installed vertically and fixed metal hoops. Suitable for areas with running water
You can get creative and create a unique structure that is both simple and stylish.
It is good to install such buildings near a pool connected to a water supply system. But any systems associated with plumbing are intended more for a cottage than for a country house for temporary residence
If a fully landscaped house is built on the site, you can attach it to the wall of the house, organizing a water supply.
Wooden buildings and partitions can become a design element if they are assembled from well-treated wooden parts and then cover decorative paint or varnish
Wood is valuable because it combines perfectly with brick and wooden houses, fences, green spaces. In addition, it belongs to soft, easy-to-process materials, so you can take care of creating a comfortable summer shower in your dacha yourself.
As you may have noticed, to create a comfortable cabin you do not need complex drawings and diagrams - just a small amount of wooden parts and a little imagination.
Capital building with tank
If you live outside the city permanently or spend more than six months, a permanent structure made of brick, timber, or foam blocks will come in handy. In order for the shower to be provided with water, the storage tank must be connected to the water supply system, and to use the room even in October or in early spring you can warm it up.
For better functionality of the equipment, it is placed inside the building, under the roof. A watering can with a tap is mounted in the lower part, a tap for water supply is fixed on the side, and a heating element on the other side.
When cold weather sets in, the system must be completely emptied of water, otherwise it will freeze and damage all equipment.
An exception is made only if the building is insulated - for example, it is an extension to the house and is partially heated common system heating.
Option for a household building made of brick with a tank. There are three rooms under one roof: a shower, a toilet and a change room; each compartment has a separate door.
Summer is a great time for a country holiday. It can be overshadowed by the lack of a shower, since a person, regardless of whether he is working or resting, needs to perform water procedures.
If the dacha is used only in summer time, then the easiest way to organize a shower is on site. You can make a mobile shower, or build a solid outbuilding.
Portable summer shower
In stores you can find foot showers. There is no need to build or carry out anything to operate it. As a rule, you only need a small container of water to use it.
An existing hose is lowered into the container and connected to the pump. It resembles a small rug. The water comes out through a hose with a watering can, and for it to flow, a person just needs to mark time in one place.
This device is simply irreplaceable, as it is suitable not only for the garden, but also for picnics, and you can take it with you on hikes.
With its help, water procedures can be carried out not only on the street, but also in the house when it is very cool outside.
To do this, you just need to put a basin and wash yourself. Another advantage of a mobile shower is self-adjustment water temperature. Such a shower at the dacha simply cannot be replaced.
Stationary shower
Many summer residents are interested in how to make a stationary shower. This option is quite expensive compared to the first. However, it will serve you well long years.
Before you start construction, you need to think about where the water will drain from it. It’s good to have an antiseptic on site. You can drain the shower into it.
If it is missing, then you need to make a hole and fill the bottom with expanded clay. A family needs a pit measuring 60x60x60 cm.
If the soil is dominated by sand, the walls of the recess will have to be strengthened so that they do not crumble. Suitable for this metal grid or boards that are no longer needed.
Shower base
As a rule, a shower building weighs little. Therefore, there is no point in making a foundation for it; it can be replaced with blocks. They are aligned to the same level so that the structure stands level.
This is much cheaper than a foundation, and takes much less time for construction, since the foundation must dry, and the building can be immediately erected on the blocks.
The blocks should be placed 20 cm from the ground, this is necessary so that the wood does not rot.
If you are going to make a structure from metal, then the blocks do not need to be leveled at a level of 20 cm. Such a frame can be installed on ordinary paving slabs.
Construction
There are two types of construction. The first is when the building is divided into several parts. In one part there is a shower, in another there is a dressing room or technical room where the boiler is installed.
Note!
The second type is a simple shower with a curtain, where only water procedures will be performed. Therefore, the dimensions of the shower are calculated based on what kind of construction is planned.
Types of frame
Metal. The frame can be made of profiled pipe, 3 mm in size. For the work you will need a welding machine.
It is best to weld the pipe joints, this will make the structure stronger. If the device is missing, then the joints can be fastened with special bolts.
Tree. For construction you will need timber. Usually a beam measuring 50x50 mm is used. Before starting construction, you need to make a drawing of the shower in the country.
Shower trim
After the frame has been erected, the shower needs to be covered with material. There are no specific standards for the material. Everyone chooses according to their own pocket.
Let's highlight the most popular materials:
- oilcloth;
- textile;
- wood;
- slate;
- polycarbonate
Water container
Absolutely any container can be used as a tank. Basically, these are metal or plastic barrels. They can be purchased at any construction and country stores.
Note!
When choosing, consider your region of residence. For southern cities, any container is suitable, but for northern regions only a metal one, as it heats up faster.
Shower tray
It is best to purchase a ready-made pallet, since it will have a drain that will directly drain into the pit. The pallet is made of plastic or metal. Metal will last much longer, so it is advisable to choose it.
Making a summer shower in the country is not so difficult. The main thing is to approach the design thoroughly and calculate in advance the amount of material required.
For clarity, you can look at a photo of a summer shower at the dacha with your own hands. It will make your stay comfortable and enjoyable.
Photo of a shower in the country with your own hands
Note!
IN hot weather Quite often at the dacha you want to freshen up, but there are situations when there is no clean body of water nearby, and setting up a pool is a rather complicated and expensive task. To get out of this situation, it is recommended to independently build a summer garden shower for your dacha; it will save you in summer heat and perfectly refreshing. It will be especially pleasant to take it after a difficult working day. A shower will help you relieve tension, refresh, invigorate, calm and distract you from negativity.
This building performs another equally important practical function - taking care of health. It is recommended to rinse periodically in order to wash away dust that has settled on you, which may contain particles of fertilizer. Doctors have noticed that people who neglect summer showers and prefer to postpone hygiene procedures until taking a bath, more often turn to specialists with problems such as diseases of the gastrointestinal tract and skin diseases.
But what if there is no shower at the dacha? If you don’t want to splash around in a trough or basin, you need to arrange comfort in the field and build a summer shower with your own hands, using ready-made drawings and photos, studying the description step by step.
This building has a huge variety of construction options, both from a technical and aesthetic point of view. But the general details are the same for any option, these are the frame, fence, tank and pallet (floor). But the options for their assembly are very diverse.
As the simplest and affordable option, is to take a bucket, punch more small holes in it and hang it in convenient location. The main advantage of such a device is its absolute accessibility, but sometimes ten liters may not be enough to wash properly. And from an aesthetic point of view, such a design is not very attractive. Another advantage of this option is that you don’t need to build anything.
If you do not go the simple route, then an outdoor shower can be constructed from wood, metal profiles and various plastics. The choice of material depends on what tool you use. If you don’t have a grinder at your disposal and welding machine, then the structure will have to be built from planed bars. Can be used as cladding plastic lining, board, or simply attach a waterproof film to the racks.
Each option has its own subtleties. For example, when assembling a wooden summer shower, you can use a huge number of design options, but plastic and metal constructions do not require special processing.
Very important point at the beginning of the build, how many people will use the shower and how often. Based on this, the volume of the tank is calculated, as well as the presence of a special drain.
The comfort of using a shower may vary. If possible, equip your dacha shower with a locker room yourself. In this case, you will avoid such an unpleasant moment as wet things. The highest level of comfort is a building that houses a shower, dressing room and toilet. Of course, creating such a structure will require an investment of both money and effort. If the tank is painted black, the water will heat up faster.
When choosing a location for the shower, try to ensure that it is sunny and that buildings and trees are as far away as possible. This is important because the source of heating the water in the tank is the sun. Another point is that the shower should not be installed on a noticeably lowering ground, as this will impede the flow of water. Particular care needs to be taken of the drain itself.
For infrequent use and a small volume of water, a small drainage layer under the pan will be sufficient. And if a shower is used by a family of several people who will use it quite often, it will be necessary to install a septic tank. It should be located 2-3 meters from the structure itself, this is done so that it does not lead to the shower bad smell. You can plant moisture-loving plants near the summer shower - they will decorate the area and provide natural drainage.
Once the location and material have been determined, the construction of the structure can begin. To do this, study 5 simple options How to make a summer shower yourself.
Homemade shower cabin made of wood
Before you build a summer shower in your country house, you need to prepare everything necessary materials and tools for work. To create an outdoor shower structure, you will need the following materials:
- timber;
- self-tapping screws;
- rubber hose;
- shower kit, which includes a bracket, curved pipe, adapter, faucet and nozzle.
Stages of assembling a wooden garden summer shower:
- A shower pit with a depth of 40 cm and dimensions of 1 × 1 m is dug, a layer of crushed stone is poured onto the bottom of the pit, it will facilitate the rapid absorption of soapy water by the soil. After this, you need to lay cinder blocks in the corners. They must be leveled.
- After this we begin to make the frame. To do this, you will need boards 15cm wide and 30mm thick. A base measuring 1 × 1 m is made from them, and 4 beams with a cross section of 70 × 100 mm are attached to it. Using lateral and two transverse jumpers inserted into the grooves, the frame is ligated. They also serve as reinforcements for the roof, where a hundred-liter tank will be installed.
- Frame covering. To do this, you can use clapboard, blockhouse or false beams. The gaps between the grooves should be about 2-3 millimeters. This is necessary so that when wet the timber can easily expand. We used a material that imitates logs to cover the shower.
- Finishing. Before painting, you need to prime the wood. A bioprotective antifungal impregnation is suitable for this; after it dries, the surface is painted with façade acrylic water-borne varnish in 3 layers.
- Then you need to hang a tank, the minimum volume of which is one hundred liters, a curtain, install shelves and attach hooks.
For self-creation A similar shower at the dacha will take 1-2 days. But a shower cabin in the country, made by yourself, will delight you throughout the entire summer season.
Country shower made of polycarbonate
When many people think of polycarbonate, a greenhouse comes to mind. Most people immediately wonder how to use such a shower, which is also transparent. But for showers there is special material who hides everything.
Summer shower made of polycarbonate on a metal profile, it is more durable compared to wood and is not more difficult to assemble. To do this, you will need a profile pipe with a cross section of 40x20 mm with a wall thickness of 2 mm and a steel angle of 50x50 mm. The number of profiles is determined based on the dimensions of the shower: length and width - 1 meter, height - 2.1 meters.
The dimensions of the cabin are not important since its length and width depend on the dimensions of the tank. The posts must be 10 cm larger than the height of the frame; this is necessary for concreting.
For convenience, it is better to assemble the sidewalls on a flat concrete or asphalt area, using welder magnets to fix the profiles.
Step-by-step instructions on how to make a shower out of profile pipe and polycarbonate looks like this:
- Two racks and two crossbars are laid in pairs on the site, after which they are welded overlapping.
- After installing the side frames vertically, two transverse profiles are attached to them by welding, the corners are checked and the joints are fixed with a working seam.
- As soon as it was poured concrete screed under the booth, placed on it finished frame so that the legs of the racks are immersed in the concrete. The installation is checked for verticality (if necessary, the depth of immersion in the screed of the racks is adjusted).
- All that remains is to weld the door frame and attach the hinges to it. The final touch will be cutting cellular polycarbonate and its fastening with self-tapping screws to the frame itself. Can be used to collect water steel pallet or at the time of concreting, make a special channel for drainage.
- For the reservoir, it is recommended to use plastic flat tanks. They are easier to install and act as a roof, completely covering the cabin.
An outdoor polycarbonate shower can look very attractive thanks to color scheme. Of course it's not worth it similar design put at the forefront. But for the owners themselves and their guests it will be very pleasant to use such a shower. In addition, polycarbonate does not require any special care.
Shower for a cottage made of brick
Creating a brick structure requires the construction of a foundation. To do this, you will need to dig a trench 400 mm deep and 200 mm wide along the perimeter of the future structure. The trench is filled up broken brick and is poured liquid concrete, so that it leaks between him. After a week has passed after the concrete has hardened, begin laying the brick on the cement mortar.
Don't forget about installation door frame. The door itself can be made of wood, or a frame can be welded from a profile and a sheet of corrugated sheets sewn into it. When will you lay it down? last layer bricks, embed the transverse ones into the masonry wooden blocks, preferably brick thickness. The tank will be attached to them and the roof will be laid.
The roof will require rigid material. Corrugated sheeting or slate are well suited for this role. After roofing material Fixed in it, a hole is drilled in the middle of the roof. The tank is installed on the roof so that the supply tube passes into the hole. A tap and watering can are screwed onto the tube.
The optimal tank volume for such a shower is 200 liters. You can buy a plastic or galvanized tank in the store or make it yourself from stainless steel. Any container that has a neck for filling water can be used as a tank.
To create a heated brick shower, you need to install a 2 kW heating element into a metal tank. The reconciliation container must be painted black. This color is more attractive Sun rays, which allows the water to heat up faster. If you additionally install a wood-burning titanium in the cabin, then in addition to heating the water, you can also heat the cabin itself. In this case, you will need to install another cold water tank.
There are two methods for creating the floor and drainage of a country shower:
- dig a hole equal to the area cabins and a depth of 300 mm, fill with crushed stone on top of which install a wooden lattice pallet. This type of drainage works well with small amounts of water;
- if you plan to build a heated shower for the dacha, which will be used a large number of people, then it is necessary to drain. To do this you need to lay 50 mm sewer pipe from the dug hole to drainage well. Fill the hole with crushed stone and fill it with concrete so that the drain is flush with the floor. Place on top of concrete wooden pallet.
A do-it-yourself summer shower for a cottage made of brick is built not for one season, but for many years, so it can be equipped with heating.
Summer shower made of corrugated sheets
A successful solution can be considered the construction of a country shower from corrugated sheets. This material is lightweight, strong and durable. For cladding with this material, both wooden and metal carcass, but there must be additional crossbars on it.
Additional emphasis will not hurt due to the fact that this material quite soft. For a metal profile, the frame is built similarly to the above options.
It is recommended to weld the door frame from metal profile. The metal profile is fastened using galvanized self-tapping screws with a sealing washer through one wave. First, the corrugated sheets are attached to the side walls, then attached to the door.
If it becomes necessary to cut the material, use scissors or special disk with teeth for an angle grinder, this is done so that the special one does not burn out during cutting polymer coating corrugated sheets
The frame of this shower is made from metal pipes. The wall cladding is made of brown corrugated sheets. The roof is also made of corrugated sheets. The opening between the roof and the wall allows light to enter the shower room.
A simple option for building a summer shower
Often many people think about how to build a summer shower with their own hands using a minimum of funds. This shower will be able to provide for a minimum of people and will allow maximum savings.
The simplest shower design is installed near a blank wall of the main building. A water container with an attached shower head is also attached to this wall. The floor of such a shower is a wooden pallet or a concreted area for convenience, which is covered with a rubber mat. For walls, use a cellophane curtain or tarpaulin wrapped around a wooden frame.
You can use any available means as shelves for shampoos and soaps. For this purpose you can even use plastic bottle cut in half and nailed to the wall. The lower part of the bottle can serve as a stand for shampoo, and the upper part for soap or washcloths, which will allow water to flow freely and not stagnate.
From an aesthetic point of view, such a structure is noticeably inferior in contrast to a capital one, but nevertheless has the right to exist.
5 ideas for organizing a shower in the country
A fairly inexpensive and fairly simple country shower is a frame made of wooden blocks covered with planed boards.
If you have a grinder and a welding machine at your disposal, you can make an outdoor shower yourself from a metal profile and cover its walls with tarpaulin. In the absence of a welding machine, the frame can be assembled using threaded connections, strengthening the corners with steel gusset plates. The sides can also be closed using a film screen placed on rings and a cord.
There is no need to build a shower frame if you attach it to the wall of your home. To do this, you will need to line it with waterproof material and bring a mixer with a hose to the surface. By filling the floor with large pebbles and performing simple drainage, you will get a fairly cozy and bright corner for taking water procedures. If you don't like it open option wall shower, can be placed next to light wall screen.
Considering further the options for a summer shower, it is worth noting that it can be made not only from purchased, but also from inexpensive scrap materials. Look at the photo below. The frame of this structure is made of wooden blocks. The fence is woven from willow vine, which can be found near summer cottages.
The shower can also be made from wavy metal sheet bent in a semicircle. For this option, you do not need to install a tank for heating water. You just need to connect to the water supply.
Now you know enough how to make a country shower yourself. If you are full of confidence in the need for a country shower, then go for it. Most the best option turns out after preliminary calculations. And after finishing this work, you can return to everyday dacha chores, in which case you have a place where you can freshen up.
Progress has reached the point that you can purchase a one-piece outdoor shower module in a construction supermarket for about ten thousand rubles. However, you can save at least twice and make the same one yourself. Before you start building a shower in your dacha, you need to carefully work out the details, such as the project itself, in which part of the site the shower will be located, and decide what materials it will consist of. In addition, you need to take into account the ease of use factor both during use and maintenance.
Set yourself the following goals:
- Hygiene is the main goal and nothing should interfere with it
- Environmentally friendly – waste water is harmful and can cause harm environment. Locate the drain in a safe place.
- Practicality - in any weather it should be convenient and accessible to freshen up or wash.
- Aesthetics - appearance must fit into the overall picture of the summer cottage.
- An alternative – there’s even a separate paragraph about this – is a collapsible or “invisible” shower.
- Savings – reduce labor and financial costs to a minimum, but not at a loss to the construction.
Selecting a location
The water should not stagnate, so you will need a slight elevation to position the shower. You should not start building a shower in a depression or depression, as the water will have nowhere to drain.
Selection right place taking a shower will help you avoid problems in the future 
Gravel backfill promotes rapid absorption of water into the soil If you have a barrel as a source of water, then it would be more appropriate to install the building in a place where it will be as accessible to the sun as possible in order to ensure good heating of the water. If you need artificial heating, then choose a location based on the location of the water supply.
Another factor for convenience will be the location not too far away, so that you can quickly get home after water treatments.
Size calculation
It is important that it is comfortable for almost any person to be inside. On average, the parameters can be like this:
- height - 200–300 cm;
- length - 150-200 cm;
- width - 120-150 cm.
Such dimensions will require minimal space and material consumption, as it is adapted to standard sizes building materials.
Optimal convenient sizes for a shower in the country Required tools and materials
To complete the work you will need typical tools: tape measure, hammer, level, screwdriver and saw.
Tools you will need to build a shower What materials you will need depends on what you decide to use to build a shower in your summer cottage. But in any case, a supply of nails, screws, and plumbing materials such as pipes, tanks, taps, and watering cans is necessary.
Regardless of whether you are building a garden shower from polycarbonate, brick, slate or some other material, you will need cement, sand and filler for the foundation. Try to calculate the quantity bulk materials so that there is no excess left.
IN final stage Don’t forget to treat yourself to decorative elements and necessary accessories, such as hooks and a curtain.
Options for shower designs for a summer residence
Except complex structures you can also use minimalist versions.
Portable shower - the name speaks for itself. To operate it, you will need a container of 20 liters (it will last about 10 minutes). Having filled the tank with water, it is left in the sun to heat the water. At the right time, just place it on required height and use it.
Inexpensive option shower that can be used anywhere This option works well if you are in a place where there is no access to a stationary shower. And on top of that, you can use a portable shower for your garden anywhere.
Portable shower trampler A shower in the house, or rather directly next to it, will be simple and convenient. This type of shower can be located against the wall of the building. Installation is quite simple.
- Removing the water supply hose from the wall
- Studying the drainage or drainage of water
- Installing a watering can and connecting it to hoses
- Screen installation
This type of shower is convenient because it does not require much effort to install and can be disassembled for the cold season.
In addition, the water does not need to be heated by the sun; it comes from the public water supply. As a result, you get a warm or even hot shower in the country without special effort. Shower walls can be made of polycarbonate or other quickly installed material. However, be careful to drain water They didn’t start to wash away the foundation of the house.
This summer shower uses hot water from home One of the most popular shower options is the stand-alone version combined with a change room. It can be either a whole room broken into parts, or made from different modules.
Combined construction of a shed with a shower Country showers of this type are temporary and require a frame since, unlike brickwork, it can be disassembled quite easily. The frame can be either wooden or metal. In both cases, processing is required by special means to avoid damage from exposure to moisture.
To assemble this structure, a lot of work is not required. We mark the territory and level it. It is advisable to create a cushion mound of sand and granulation. Then we lay the boards and install assembled structure or we collect it on site.
Portable shower in a case. There can be many types of such showers. But the essence remains the same everywhere - the volume of water is maximum for two, problems with heating the water. But this shower doesn’t even need a drainage hole - with a couple of tens of liters dirty water ecology can definitely cope.
No doubt, the most convenient thing is not far from the site and with all the amenities. However, such versions may become good help in the field.
Preparing the base
For various types the buildings country showers different levels of training are required. This means that the base also needs to be different.
For portable shower you just need to remove about 15 centimeters of soil and fill it with sand mixed with gravel.
For more complex buildings, a foundation will already be required. Its depth depends on the load that will be given Construction Materials. For a vertical shower 300 centimeters high made of brick, you will need 30 centimeters of foundation.
Capital construction soul in the country The bookmark algorithm is quite simple, namely:
- We determine the area using pegs at the corners of the shower
- Using pegs we stretch a cord to mark the perimeter
- We place formwork if necessary
- In order to leave room for the pipe, any cylindrical object wrapped in roofing material is inserted
- At the end, pour the solution
Drain pit equipment
For normal operation The drainage pit requires an average of 2 cubic meters. To make it durable and serve you as long as possible, it is advisable to strengthen the walls of the pit. This will help avoid soil fall. In addition, it is desirable that the drain be located a couple of meters from the shower itself. This is necessary for two reasons: to prevent erosion and destruction of the foundation and the formation of unwanted odors.
Taking into account the above, make a personal calculation of the volume of the pit based on how much water will go there at a time.
You should also ensure that the pit does not dry out or overfill - both will damage the operation of the pit. You should not drain into a common pit as this will negatively affect the microflora and will quickly fill the pit.
A drainage pit for a shower can be made from old tires and placed directly under the building The choice of containers for collecting water is very large. There are tanks in stores of all shapes and sizes, it all depends on your needs. The most convenient is a flat tank, black, since due to the narrow layer of water the rays do not have to penetrate far, and the black color absorbs more heat - as a result, the water heats up faster. Such tanks are equipped with special water outlets, which simplifies the installation of the system.
Flat black tank heats up faster in the sun You can artificially heat water using a heater. Here you should remain careful - the insulation may leak and a short circuit will occur or the water will be electrocuted.
Shower container with built-in shade If it is not possible to buy a container in a store, you can make it from scrap materials, for example, a household barrel or weld it from sheets of metal.
When purchasing and installing a tank, consider how its weight will be distributed and how much water your family will need. To make it easier to collect water, you can connect a hose to the container.
Lighting and ventilation of a country shower
Lighting will be useful, since you will have to take a shower in dark time days. However, when laying and distributing wires, follow the safety rules:
- Work with wires without damaging the insulation
- Make the wiring so that it does not interfere with movement both indoors and outdoors
- Carefully insulate joints
- Provide moisture protection for switches and lamps
For ventilation, make a window or a special hole with a grill or mesh so that debris and insects cannot get inside. Ventilation will help avoid arguments and bad odors in the shower.
For good ventilation it is necessary to make an opening window It is logical that it is best to finish with those materials that will not deteriorate due to moisture getting on them, this can be plastic, plastic, oilcloth and even linoleum. If you decide to make a wooden shower for your dacha, then all the material must be primed before painting and then covered with hot drying oil (each board separately).
It is worth taking care of the floor covering. Can be laid on concrete or sand floor wooden grate, also treated with drying oil, and a rubber mat on top.
You can use a wooden grid as a floor A locker room with various accessories will also be useful inside. A shelf in the shower can be made together with hooks to conveniently fold or hang clothes and accessories. Keeping the locker room dry is also important, so you can raise the floors using any means at hand that will ensure the stability of the grid.