This plastic space rocket will be a great toy for your child. Moreover, it is in no way inferior to the store-bought one: just as bright and durable. Moreover, the process of creating a rocket itself will become an exciting game. Making such a toy is quite easy.
If you don’t have time to play with your child, but need to occupy him with something, then this fake is an excellent way out of the situation. The rocket will be made in three colors: red, blue and silver. These colors harmonize well. But you can choose others, it all depends on your imagination.
To create a rocket you will need:
- Plastic bottle (small);
- Foil;
- Glue;
- Acrylic paint (red);
- Colored cardboard;
- Felt pen;
- Scissors;
- Brush.
1. First of all, you need to make the nose of the rocket. To do this, roll the blue cardboard into a cone. Glue the ends. Finished part put it on the bottle.
2. Then, you need to mark where the porthole will be located. To do this, draw a round window in the upper zone of the bottle with a felt-tip pen.
3. On the back of the blue cardstock, draw the wings of a rocket. There should be three of them in total. Then we cut them out.
4. We will make slits in the bottom of the bottle.
5. Let's make the slits. After this, you need to paint the bottle with red acrylic. Make sure that there are no unpainted areas. There is no need to paint over the porthole.
6. Now insert the wings into the slots.
7. Paint the legs of the rocket black. The figure will be more voluminous.
8. The toy is almost ready. All that remains is to give it a more elegant look by edging it with shiny foil. Let's make a winding in the places indicated below on the bottle.
Master class for older preschoolers "Making a model rocket from waste material"
.Relevance:
children preschool age are actively interested in space technology, but information from cartoons is often unreliable. It is important to introduce children to reliable and age-appropriate information. Create conditions for translating preschoolers’ ideas about space technology into productive activities. Help children make a model of a rocket from waste material.
Educational:
Introduce children to affordable space technology;
-learn to distinguish and name parts of a rocket;
-enrich lexicon in words: windows, stabilizers, fuel, etc.
-maintain cognitive activity on the topic "Space".
Educational:
Foster hard work and perseverance in achieving goals;
-help children experience positive emotions in the process of creating a model rocket.
Educational:
Develop fine motor skills and eye;
Develop fantasy and imagination.
Preliminary work:
examination of images of space technology, clarification of the names of parts and elements of the rocket.
Equipment:
plastic bottle, brush, silver gouache paint, colored electrical tape, self-adhesive paper or film, scissors, pencil, templates, decorative stickers (optional).
Progress.
Paint a plastic bottle and let the paint dry.
Cut out the “nose” of the rocket from self-adhesive paper according to template No. 1. Roll it into a cone and secure it to the “nose” of the rocket with electrical tape, crimping the edges.
Cut out the "portholes" according to templates 2 and 3. Glue the smaller one onto the larger one, glue it onto the body. Before attaching, make notches along the edges of the larger circle as in Figure 5 to better adhere to the convex surface.
Now comes the hard part. We cut out “stabilizers” from self-adhesive paper folded in half. Using template 4. Removing protective layer from self-adhesive paper, attach part of it to the vertical edge of the “stabilizer” and bend each of them by 3-4 millimeters. This part will be attached to the rocket. We fix it on the bottom of the body.
Now, we decorate the rocket model with strips of self-adhesive paper and electrical tape. You can use stickers that match the theme.
Our rocket is ready to fly. It can be a play attribute during a walk, in a relay race, or in the sandbox.
Templates included:
Any of the materials at hand for a child can become an excellent toy or craft for a school exhibition. To do this, you just need to show a little ingenuity and use additional, no less available materials. You've probably already tried to do or. In this article we will tell you how to do different models rockets from conventional plastic bottle.
Plastic bottle rocket for little ones
Let's start our master classes with the simplest rocket that you can make together with your baby. To make it we will need:
- empty plastic bottle;
- small pieces of foam;
- stationery knife;
- scissors;
- baking foil;
- paints, preferably acrylic;
- brush.
Children's craft "Rocket" from a bottle
Another version of a rocket made from a plastic bottle, which can be used as a craft for an exhibition, is also made together with the child. To make it look neater, we will use stencils.
So, for the rocket we will need:
- plastic bottle without relief;
- acrylic paints;
- brush;
- dense colored paper;
- scissors;
- stationery knife;
- scotch;
- cardboard.
DIY "Rocket" craft from a plastic bottle
An original rocket can be made by simply slightly changing the manufacturing technology and adding a few more new elements. So, for the next version of the rocket we will need:
- transparent plastic bottle of rectangular shape;
- white acrylic paint;
- three plastic caps of different diameters and different color;
- a plastic cup;
- two cardboard tubes;
- thick cardboard in red, yellow and orange colors;
- felt-tip pens or pencils;
- scissors;
- hot glue.
- To paint a bottle, pour a little white paint into it and, closing the lid, shake well so that the paint evenly colors the inside of the bottle. This process can be made less labor-intensive if you immediately take a plastic bottle the desired shape And white. A dairy bottle may be suitable for this purpose.
- We color the cardboard tubes with pencils. We cut out strips of flame from colored cardboard and glue them to the tubes with inside. We glue the resulting nozzles with a flame to the bottle with hot glue.
- We make portholes from multi-colored plastic caps. To do this, glue them with the back side to the front of the rocket using a hot glue gun.
- We cut out two triangles from cardboard, color them with felt-tip pens or pencils and glue them to the sides of the rocket.
- We glue an inverted plastic cup to the bottom of the rocket with hot glue, which will be another nozzle, and at the same time stable foundation rockets. After the glue has completely hardened, our rocket is ready!
DIY rocket is very relevant on the eve of February 23 and April 12, however, throughout the rest of the time, boys and girls who are interested in space will be interested in mastering such “crafts.” We will tell you and many other materials.
Paper rocket - craft
This craft will appeal to children aged 5-7 years; it can be used for role-playing games, interior decoration, etc. spaceship with appliqué elements can be presented as a present for relatives. Such a pastime will also be very useful for children, because it will reinforce the knowledge of ordinal counting, size, geometric shapes. Also, making such a “craft” will develop the eye, visual memory and coordination of movements.
Fold a sheet of colored paper in half and cut the resulting rectangle along the fold line. Take one half and roll it to form a cylinder.
Fix the sheet in this position using a glue stick. The other half should be transformed into a cone, secured in the same way with a glue stick. Trim the edges carefully in a circle - this will help the structure become more stable.
Take three squares of white paper and roll them into three cylinders. On a white square, draw a porthole - a small circle with a simple pencil. Carefully cut out the porthole, not forgetting to remind your child about the rules for handling cutting objects.
Glue the porthole to the cylinder that you made very first.
Start assembling the space vehicle: fix the nose part, then proceed to design the “tail” - fix three small ones at the bottom of the large cylinder.
How to make a rocket craft using origami technique
Option #1
This craft is perfect for celebrating Cosmonautics Day. It is made using the modular origami technique and will appeal to older children. Prepare 10 pieces of paper squares with a side of 10 cm for folding.
Fold the square so that you get a pair of rectangles, then four squares. Fold the four corners towards the middle, turn the figure over and fold the four corners towards the middle. Fold the corners to the middle again, but not all of them, but only the top layer, at this time the backing layer should come forward. That's how you made a module called "squared star". Insert the finished modules into one another, gluing them together. Glue the bottom row consisting of four “stars in a square”. Glue three more rows on top, and then connect the entire body. Of course, you can’t do without the nose of the aircraft - to do this, roll up a paper cone.
As an addition, you can also make legs by gluing modules to the base. Now you have a wonderful origami rocket!
Option No. 2
Start assembling the origami rocket by preparing the mold. Draw or stick on portholes.
Assemble triangular modules into columns and lay them out along the contour of the aircraft. If in the future you do not plan to disassemble the structure, then you should glue the outer modules to paper. Some blanks should be opened and added to the structure in this form.
So, the “makeshift” is ready, if you wish, you can still choose a suitable background with stars.
Children's craft rocket
Great value for child development has a modeling process, because such an activity is also useful for fine motor skills, both for attention and for perseverance. Of course, modeling will give children the joy of creativity.
Let the child choose the plasticine block he likes; he will need to roll it on the glossy surface so that the block acquires oval shape. Secure it vertically to the board, flattening one end and squeezing and pulling the other so that the end becomes pointed.
Take another block and roll small balls, attach them to the body, placing them in a row. Another block will be useful for rolling a long sausage; it will need to be divided into four equal parts - these will be the legs. Attach the legs to the flattened end of the spaceship.
To make a door, roll out a small oval, flatten it and attach it to the bottom of the “homemade product”. Attach a piece of plasticine of a different color to the pointed part.
DIY rocket craft - postcard
On February 23 or on Cosmonautics Day, a child will be able to make a wonderful rocket postcard, which will very beautifully combine the techniques of appliqué, plasticineography and origami. This master class is intended for children 5-7 years old.
On a piece of yellow paper, draw lines 1 cm thick (use a ruler and pencil to ensure the lines are straight). Carefully cut out the paper strips.
Fold a white square with a side of 8 cm in half, fold the upper part of the figure 2 cm towards the center, and also fold the upper right and left corners towards it to form a “house”. Fold the right edge back toward the center, leaving the “roof” unchanged. Do a similar manipulation on the other side of the “tinker”.
Start opening the “doors” of the house: bend them in the middle from the center to the right, iron the edges of the door carefully and carefully. Do the same with the left side of the “house” - and you will get an origami rocket. Glue it by the nose and wings onto a sheet of colored cardboard. For work, it is best to use a glue stick.
The next step will be to design the tail zone of the spacecraft - to do this, fold the yellow paper strip like an accordion. Glue three pieces of blanks to the tail part. In this case, only both ends of the strips should be coated with glue, this will allow the craft to be more airy.
At the top of the rocket, draw a porthole with a felt-tip pen. To make clouds, roll cotton wool into small balls and glue them using PVA glue. To decorate the sky, use plasticine of various shades - roll tiny balls and attach them in a chaotic manner. There you have it, a wonderful postcard.
Craft a rocket from a bottle
The shape of a plastic bottle is ideal for such creativity, which is why you should definitely use this waste material, which can be found in every home.
The first step is to cut off the bottom of a plastic bottle and put it aside - it will no longer be needed for work. Draw a circle on the surface of the plastic and cut out the porthole.
Make a cardboard cone that will act as a rocket nose and glue it to the neck of the vessel. Cardboard is also useful for cutting out the window frame and tail, and also twist the nozzles from pieces of cardboard.
Paint the rocket and all elements in required colors, wait until it dries completely. Glue the missing elements. Don't forget about the flame that comes out of the nozzle - use thin strips of tissue paper for this purpose. So the rocket from a bottle with your own hands is ready - such a craft will take its rightful place at any exhibition.
You will also be interested in, you can place any figures there - animals, plants, objects.
Here's another unusual one interesting option- water. By the way, we will tell you how you can launch such an aircraft. Make a cone out of regular green colored paper. The radius must be large enough, because this cone will subsequently have to fit onto the plastic bottle. Of course, this part will need to be fixed so that it does not unwind at the most crucial moment. To do this, wrap the entire cone with tape to make the part more dense.
Take the regular one plastic container, preferably white. Turn it over and attach a cone to the bottom. If it “sits” tightly, good, otherwise it would be better to glue it. Please note that ordinary PVA glue will not work for this work; you need to find a more reliable option.
Cut out four paper triangles and glue a bottle rocket to the prize for the supports.
So, how can you launch such a wonderful “tinkerer”? The first step is to fill the bottle with ordinary water to about a third of the volume. Take an ordinary bicycle pump, insert the pump hose into the neck (if there is a gap, i.e. the hose is smaller in diameter than the neck, then a hole of a suitable diameter should be cut in the plug, i.e. the hose should fit tightly enough). Insert the hose far enough so that it comes out of the water inside the vessel. If you want the rocket to fly very far, then hold it while pumping, and then release it when you pump up the air. Do not pump too hard. Pressure builds up in the container and then your water craft will take off, and the water will naturally pour out.
Craft a cardboard rocket
The simplest version of a cardboard “tinkerer” will satisfy even the smallest ones. The first step is to transfer everything to a cardboard sheet necessary details, then cut them out. Also use the roll from toilet paper- the necessary small cuts should be made in it.
Connect all the pieces together and glue the decorated paper to aircraft. You can also glue a cocktail tube to the craft - then you can stretch a thin rope around the room and arrange real launches.
Here's an option for students primary school, it will be more complex. Cut out the parts according to the templates; use colored cardboard as the material. Roll a colored paper sheet onto a toilet paper roll and bend the ends inward.
On one side of the cardboard roll, use scissors to make 4 slits, the length of each should be 2.5 cm. Insert the required two parts into the slits.
On paper sheet draw a smiley face, cut it out and glue it to the rocket body. In the circle part, make a slot to the center. Roll the cone and fix the part in this position using the cone.
Tie the ends of the candy together with a thread and secure the candy inside the rocket body. Secure the cone to the top. Attach strips of corrugated paper to the rocket “supports” using the same stapler. If you wish, you can further decorate the “homemade product”, for example, glue numbers, draw some kind of ornament with a felt-tip pen. Now you know that such a pastime will bring only positive emotions and will serve to develop accuracy and concentration.
If you liked our site, express your "thank you"
by clicking on the buttons below.
Summer is in full swing! For those who are already fed up with barbecues and sun loungers on the beach, we offer a cool idea for entertainment on fresh air: water rocket. The children will squeal with delight, the girls will be amazed, and the dacha neighbors will be furious and extremely surprised. The idea is not new; water rockets are very popular in foreign countries; there are even special championships for launching these things. You can buy them in the store, or you can make them yourself. Let's talk about this.
The principle of operation of a water rocket is extremely simple. You need a plastic bottle, one-third filled with water, a bicycle or car pump, a nipple and a launch pad (launcher) on which the rocket is fixed. The pump pumps air - the bottle flies high and far, splashing water around. All the “fuel” is squeezed out in the first moments after launch, and then the rocket flies along a ballistic trajectory (therefore, the center of gravity is moved as far forward as possible).
But the technical variations in the manufacture of this design can be very different. Some amateurs create real masterpieces:
Let's consider one of the simplest options.
1. Choose a bottle
The rocket should not be too long or too short, otherwise the flight will be crooked or not take place at all. The optimal diameter/length ratio is 1 to 7. A volume of 1.5 liters is quite suitable for the first experiments.
2. Select a cork
You will need a valve stopper for lemonade or any other drink. This will be the rocket nozzle.
It is important that the valve is new, not worn, and does not leak air. The best way to test it in advance is to put the cap on the empty bottle and squeeze tightly.
3. Attaching the nipple
You need to make a hole in the bottom of the bottle and fix the nipple in it, with the “nose” facing out. The main thing here is to achieve the highest possible tightness: tighten the clamping screw to the maximum, you can experiment with glue or plasticine. The bottle should not allow air to pass through.
4. Cut out the stabilizers
In order for the rocket to fly smoothly, it must be installed correctly. The easiest way is to make a stabilizer (legs) from another plastic bottle. To do this, the bottle is cut in half and straightened. Then, on this flat surface, draw the contour of the stabilizer, provide a backlog for attaching to the rocket body.
Now cut out the stabilizer along the contour and glue it to the rocket with tape.
The picture also shows a weighted rocket body; this author used a cut-off part of another bottle with a weight-bolt in the cap. In fact, there is complete scope for imagination and experimentation; you can accurately determine the optimal load in the head of your rocket only after several launches. The shape of the legs can also be different, for example, you can use the top of a plastic bottle, attach plastic legs to it, and place the rocket itself inside:
As for the launch pad, you can get creative here too. Someone's cooking complex designs with a guide axis, some cut out special devices from wood, while others simply fix the rocket on a flat surface using improvised means.
In principle, the simplest water rocket after the described steps is already ready. You just need to take with you more water, a pump and an assistant: he will hold the rocket with the plug down and press the valve with his hands while you pump the air with the pump. It is recommended to pump 3-6 atmospheres into a 1.5 liter bottle (in this sense, a car pump is more convenient), then disconnect the hose and release the cap on the count of “three or four”. The rocket has been launched! It flies quite high and impressively, and most importantly, the whole process is not life-threatening. True, the assistant usually has to take a forced shower from the “fuel” :)
If you liked this idea and want to experiment further, we recommend reading, for example, there are more complex missiles here, with real launchers. picture with step by step instructions, though in English, but everything is drawn quite accessible. Well, if you liked the video and wanted to repeat something similar, welcome to the rocket modeling club: serious guys use several bottles with compressed air, and only one contains water.