We will send the material to you by e-mail
Scrap metal collectors will be happy to take your old washing machine. But don't rush to please them. You won't get much money for scrap, but if you approach this issue wisely, you can get a lot of useful things for household. Homemade engine from washing machine They will help you quickly de-feather a bird, cut up pet food, mow the lawn, smoke fish and meat. And this is not a complete list of what can be made from a washing machine. Today in the editorial review of the site detailed instructions, how to give the “heart of iron” from a washing machine a new life.
Parts from a washing machine are a material for many useful homemade products
If you are planning to make homemade products from a used engine, you need to figure out what it is and what it is capable of. In you can find three types of motors: asynchronous, brushless and commutated. Let's take a closer look at them:
- Asynchronous– can be two-phase or three-phase. Two-phase engines are found in older Soviet-made models. More modern machines are equipped with three-phase. The design of such an engine is extremely simple; it can reach speeds of up to 2800 rpm. The working engine removed from the machine just needs to be lubricated - and it is ready for new exploits.
- Collector– you will find this type of motor in the design of most household appliances. Similar devices can work from constant and alternating current, have compact dimensions and controlled speed. The only drawback of such an engine is the brushes that wear out, but these parts can be replaced if necessary.
- Brushless Direct Drive– the most modern engine from the Korean manufacturer. You will find it in modern washing machines from LG and Samsung.
Now that you can determine the type of motor, all that remains is to decide where you can use the motor from the washing machine.
We properly disassemble and decide what can be made from parts of an old washing machine
Disassembling a washing machine is a leisurely task. After working with water, a salt build-up may remain on the parts; it must be carefully removed so as not to damage the parts during removal. What can be made from an old washing machine? A motor will be useful for homemade projects - it will become the basis for many devices. The drum will also come into play. It is usually made of stainless steel. All pipes must be disconnected from the drum. A loading hatch may also be useful. In addition to these parts, do not rush to throw away springs, counterweights and body parts.
How to make a sharpener or grinding device from a washing machine engine
A sharpener is one of the most popular tools for the home. With its help you can sharpen gardening Tools, household knives and scissors. If you don’t already have one, buy it at any hardware store or make one grinder from the washing machine. Most difficult moment– how to secure emery wheel on the motor. The easiest way is to buy a ready-made flange. It looks something like this.
You can machine a flange from metal pipe suitable diameter, most often a tube with a cross section of 32 mm is suitable. You need to cut a piece 15 centimeters long from it, this is quite enough to fix the emery. The flange is secured to the motor shaft by welding or a through bolt. The video describes in detail how a homemade washing machine sharpener works:
Making a wood lathe from a washing machine
What else can you do with the washing machine motor? One popular idea is a wood lathe. Let's look at the step-by-step process.
| Illustration | Description of action |
|---|---|
 | To firmly fix the engine on the workbench, make fasteners from a metal angle. To do this, drill holes for fixing to the motor legs and table. |
 | To fasten a wooden part, you will need a flange fixed to the motor shaft, and these are the studs made from ordinary bolts with cut off heads. Screw these pins into the base. You will need 3 studs. |
 | The motor is fixed to the table with self-tapping screws and to the metal part with bolts. |
 | The opposite end of the wooden part is attached with such a device. It consists of a screw with a loop, two wooden stands perpendicularly fixed to the corners. |
 | This wooden part must be movable so that different workpieces can be used. For mobility, it is mounted on a threaded stud with bolts. |
 | To control the motor you will need a power supply. You can use one of the computer units. You will need to install switches to adjust the rotation speed. |
 | How to connect a motor to a power supply in animation. |
 | Make a tool rest to guide your tools. It consists of two wooden parts and a metal corner. All parts are movable due to fastening with one bolt. |
 | The lower part of the tool rest is rigidly fixed on the workbench using self-tapping screws and corners. |
 | The workpiece is fixed on the machine on both sides: on the left - on studs, on the right - on a bolt with a handle. To fix it in the workpiece, you need to drill the corresponding holes. |
 | To work, you will need sharpened tools - cutters. |
 | Final sanding of the workpiece is done using a strip of sandpaper. |
How to make a simple feather removal machine for home use from a washing machine with your own hands
The time of slaughtering a bird is a troublesome stage. This is usually done in the fall, when the ducks and broilers have reached the desired weight, and it is no longer profitable to keep them in the winter. You need to pluck several dozen or even hundreds of carcasses very quickly. You can get rid of hard labor with the help of a feather removal machine, and it’s easy to do everything from the same parts of the washing machine.
The device does not require disassembling the washing machine. It is especially convenient to use machines with vertical loading. You just need to fix the beats in the drum so that they point inward. Before plucking, the chicken carcass must be scalded with boiling water and then simply thrown into a rotating drum. Here's what happens:
Important! To prevent water from getting on the engine of the feather removal machine, you need to protect it with a plastic casing.
And the last point - the feather removal device must be firmly fixed, since the vibration when loading the carcass will be very strong.
Lawnmower from a used motor
We continue to look for the answer to the question of where we can use the motor from automatic washing machine. Another original idea is making. For small area quite enough electric model connected to a power source with a cord. The design of such a unit is very simple. You will need to make a platform on four wheels with a small diameter.
The engine is fixed on top of the platform, the shaft is threaded into the hole below, and the knife is attached to it. All that remains is to attach handles and a lever to the cart to turn the power on and off. If you have some asynchronous motor, you will be surprised how silent the unit will be, even in comparison with factory models.
Advice! To prevent grass from wrapping around the knives, you need to bend them slightly cutting edges down.
Video: how to make a lawn mower
Animal feed cutter
For a rural resident, a feed cutter is a very important device in the household. And this unit is easy to make from. What can be used: a drum and a motor.
For a feed cutter, you will need to make a housing in which a drum with holes sharpened for cutting and a lid for pressing will be mounted. The connection between the rotating drum and the motor is carried out through a drive. Finished model looks like that:
How to build a generator from an old washing machine
We continue to look at homemade products from a washing machine motor, and the turn has come to the generator. You won't be able to assemble a powerful device, but in the event of an emergency shutdown, you can be well prepared. To turn the engine into a generator, you will have to disassemble it and partially cut off the core. In the remaining part of the core you need to make grooves for neodymium magnets.
The gaps between the magnets are filled cold welding. To operate the device, the kit must include a motorcycle battery, a rectifier and a charge controller. Details of the work in the video:
Homemade concrete mixer
If you started minor repairs, which requires, for example, plastering walls, you will need a concrete mixer. Once again, washing machine parts will come in handy.
As a container for concrete, you can use the same drum with pre-sealed holes for draining water. It is best to use parts from a front-loading machine; there will be almost nothing to redo. To strengthen the body, use metal corner, and for convenient movement of the concrete mixer, equip it with wheels. The main difficulty in the design is the manufacture of a “swing” for the correct tilt and subsequent pouring of concrete. How to do it correctly in the video:
Homemade products from a washing machine engine: circular saw
You will be surprised, but a circular machine can also be built based on the motor from a washing machine. Important point in this matter - optional equipment motor with a device that regulates speed. Without this additional module, the circular machine will work unevenly and simply will not cope with the task. Device assembly diagram:
The principle of operation of the device is simple: the engine drives a shaft on which a small pulley is mounted. From the small pulley there is a drive belt to a large pulley with a circular saw.
Important! When working with a homemade circular saw, take care of your hands. All structural parts must be firmly fixed.
The resulting unit will not be very powerful, so it can only be used for dissolving boards up to 5 cm thick. How does this work? homemade circular:
What else can be made from a washing machine drum: original decor ideas
The drum with its correct perforation is the material for manufacturing decorative items. Here are some interesting ideas.
Bedside tables and tables. Drums with doors from top-loading machines can be used to hide small items.
Making a barbecue from a drum from a washing machine, photo examples
- a temporary product. Sooner or later it burns out and requires replacement. You can buy a new one each time or use improvised material, for example, a drum from a washing machine. Making this craft from a washing machine drum takes a couple of minutes. The beauty is that oxygen easily enters the perforated container, which causes active combustion.
The metal of the drum can withstand a couple of seasons. Do it for him convenient stand, so that you don’t have to bend over, and you’re done. Standard length skewers will fit comfortably on a small roasting pan. If necessary, you can lightly weld a couple of guides.
How to make a good smokehouse from a washing machine drum
The icing on the cake in our question is. Fragrant smoked meat, lard and fish - what could be better for the table? If you have a tank from a top-loading machine lying around in your shed or garage, consider it a done deal.
It is necessary to cut a hole in the bottom of the tank for the firebox, and weld fasteners inside for hanging food. All that remains is to install the tank on the fireplace, hang the fish or lard, cover the top of the tank with a lid and light the sawdust.
It is important that the fuel under the smokehouse smolders and does not burn. It is better to place such a device away from home.
Important! You'll have to keep an eye on this smokehouse. It should not be left for a long time, the fire may flare up, and instead of a smoked product you will get a burnt product.
Hello everyone, I present to your attention a very easy to make one. With it, you can make tool handles, grind, and so on. Everything is done quite simply; the engine used as a basis is from a washing machine with a power of only 180 watts, which rotates at a frequency of 1425 rpm. Such engines were used in many Soviet washing machines. Although they are already quite old, such motors last for quite a long time.
Materials and tools used
List of tools:
- Bulgarian;
- welding machine;
- measuring tool;
- drill.
List of materials:
- square pipes;
- Sheet steel;
- motor from a washing machine (180 Watt);
- bolts, nuts, washers, threaded rods and other small items.
Manufacturing process:
Step one. Assembling the base
The author used square pipes as the basis. Thanks to their shape we get excellent guides. We cut the pipes, clean them, and then weld the structure.
Step two. Engine bracket
To secure the engine, we need a stand. The author makes it by welding two pieces of square pipes. We weld a square plate with holes to the rack, to which the engine will be attached.
The stand itself is welded to a piece of channel, and the whole thing is movably attached to the frame by screwing it with bolts and nuts. On the other side of the guide, a similar section of channel is installed.
Step three. Grandma
We weld the headstock from sheet steel, and in order for it to travel along the guides, we will need square pipes of a slightly larger diameter than we used for the base. We cut them, weld them and get an excellent moving platform.
Step four. Cartridge
A cartridge is welded to the engine shaft; it is made from a piece of round steel pipe. It is advisable to first grab the part by welding and rotate the shaft; you will immediately see whether there are any beats. Well, if everything is smooth, then you can weld it completely.
Step five. Podruchnik
From sheet metal and threaded rods we assemble the tool rest. The author can adjust it in height, and you can also change its angle. If there is no sheet steel of suitable thickness, you can cut it from a channel or angle.
Step six. Rotating headstock assembly
The thrust piece on the headstock must rotate with the product. To make this rotary stop, the author adapted two bearings that were installed in a piece round pipe. Next, the whole thing is welded to the headstock axis; you will need to install a sharp tip at the end. To make it convenient to clamp the product, the author screwed a large aluminum handle from a water tap to the headstock.
Grinding machine made from a washing machine motor: detailed drawings and step by step photos making a homemade machine.
When a washing machine breaks down and cannot be repaired, usually the engine remains in full working order, it can be used to make homemade products, in particular, you can make a homemade one grinding machine. We will consider the manufacture of such a machine in this article.
Then you need to have a turner turn such a part onto the engine shaft. The picture shows the drawings.
Turned detail.
You will also need these details.
We will make a frame from sheet metal.
Vertical stand.
We assemble a lever from the parts.
This screw adjusts the angle of the tape; for convenience, a bottle cap is placed on the screw.
The base of the machine is made of 40 mm angle iron.
To attach the lever to the frame, support bearings and a 12 mm bolt are used.
Let's make a support plate from an angle and a plate. You will also need a pulley from the car's timing belt; glue a piece of the timing belt on top so that the tape does not slip.
Additionally, you can make a few more smaller videos, since what smaller size roller, the lower the belt speed. At a lower speed, more is processed soft materials, for hard ones, use a large roller.
Our homemade grinding machine is ready. The sanding belt on it is used from a sander, which is cut into several belts. On vertical rack Several holes are made to accommodate sanding belts of different lengths.
Whether in a professional workshop or in an ordinary garage, it is often necessary for some household needs to accurately drill several holes in metal, wood and other materials. Regular household drill may not be suitable for this, especially when greater accuracy is needed. A drilling machine from a washing machine, or rather from a washing machine motor, which you can make yourself, can come to the rescue. It will cost you very little. The manufacture of such a machine will be discussed in the article.
Main details
Before assembling a drilling machine using a washing machine motor, it is necessary to clearly understand the safety rules, both during assembly and during subsequent operation of such equipment.
Remember! Working with a homemade drilling machine can be dangerous to life and health! Be extremely careful and do not forget that if you do not have the necessary skills, you should not undertake the manufacture of such units. We do not encourage everyone to make and use drilling machines and provide this information for informational purposes only.
So, what parts are needed for manufacturing? drilling machine? Conditionally everything necessary details The machine can be divided into 3 groups: engine and drive mechanism, bed and mechanism for moving the drill in a vertical plane, electronic filling. The first group includes:
Second group details:
- steel angle 50 mm;
- steel beam 30x60x30 cm;
- square sheet of metal 40x40 cm;
- steel staples;
- old steering rack from a VAZ eight;
- fasteners;
- drill shaft;
- bearings 6003 2RS;
- bearings 8103;
- drill chuck;
- a homemade turntable made from three hairpins welded together.
And finally, the parts of the third group are represented by electronic filling, which will control the engine speed so that the drilling machine works stably without failures. The easiest way is to use a ready-made chipTDA 1085, although there may be other options.
Machine mechanism
By making a drilling machine from a washing machine motor and other motors, DIYers have long realized that it is easier to achieve what they want by using as many standard standard parts as possible. This may make the structure a little more expensive, but it will be more reliable and last longer, and most importantly, it will be easier to assemble. A striking example is the use of a VAZ steering rack in the manufacture of a moving mechanism. In essence, this is a moving mechanism; all that remains is to come up with a worthy frame for it.
In the picture above you see First stage manufacturing the drilling machine mechanism. We reliably weld the steel beam to a sheet of metal, thus creating a reliable and strong frame. TO steel beam located vertically, we screw it onto bolts with brackets steering rack from VAZ 2108 as shown in the figure.
IN in this case We immediately had problems securing the turntable and had to cut a small notch in the base of the steel beam.
We move on to a more complex stage, namely the manufacture of the base of the moving mechanism and parts of the mechanism itself, without which the drilling machine will not be able to function. This part of the machine is shown separately in the figure above.
- From the scraps of the corner you need to make rectangular frame with an allowance on one side for fastening elements. These large bolts are fitted with bearings, thanks to which this essential element the structure will move up and down along the beam as if on rails.
- We weld another piece of corner to the side of the frame, in which you need to drill a hole for the bolts. They screw the frame to the movable steering rack.
- We weld two pieces of corner square profile, into the body of which we will insert the drill shaft with bearings. Accordingly, a cartridge will be placed on the shaft on one side, and a pulley on the other.
Now all we have to do is screw the part shown in the picture above to the steering rack. The result is a solid base, which already looks like a drilling machine.
Motor and its connection
Connecting, checking and we have repeatedly considered it in other publications, so we will not dwell on this. Let us only note that before installing the motor on a drilling machine, it would be a good idea to check its functionality.
So, from the corners we weld a frame onto which we place the engine and screw it on this design on the side of the moving mechanism of the drilling machine. First we place a pulley on the motor shaft.
Now all we have to do is tighten the drive belt between the pulleys, connect the motor to the TDA 1085 chip board, and power the machine from a household electrical network and you can test the new drilling machine that you managed to make with great difficulty. Load a chuck with drills of different diameters and watch how the drill press copes with making holes in thick sheets of metal - a fascinating sight.
Important! When connecting the microcircuit to the engine, do not forget to protect it with a plastic case, you never know what could fly into it in the workshop during operation.
In conclusion, we note that it is quite possible to make a drilling machine using a motor from a used washing machine if you have right hands, a great desire and a workshop with the appropriate equipment. Such a machine “will cost three kopecks, but will work for three rubles.” Good luck!
Homemade products from a washing machine engine (video collection, photos, diagrams)
1. How to connect a motor from an old washing machine through or without a capacitor
Not all washing motors will work with a capacitor.
There are 2 main types of engines:
- with capacitor start (always on capacitor)
- with start relay.
As a rule, “capacitor” motors have three winding terminals, a power of 100 -120 W and a speed of 2700 - 2850 (centrifuge motors for washing machines).
And motors with a “start relay” have 4 outputs, a power of 180 W and a speed of 1370 - 1450 (washing machine activator drive)
Connecting a "capacitor" motor through the start button may result in loss of power.
And using a permanently switched capacitor in a motor designed for a starting relay can lead to burnout of the windings!
2. Homemade emery from a washing machine motor
Today we will talk about remodeling asynchronous electric motor from the washing machine to the generator. In general, I have been interested in this issue for a long time, but there was no particular desire to remake the electric motor, since at that time I did not see the scope of application of the generator. Since the beginning of the year, work has been going on new model ski lift. Having your own lift is a good thing, but skiing with music is much more fun, so I quickly came up with the idea of making such a generator so that in winter on the slope I could use it to charge the battery.
I had three electric motors from the washing machine, and two of them were absolutely working. I decided to convert one of these asynchronous electric motors into a generator.
Looking ahead a little, I will say that the idea is not mine and not new. I will only describe the process of converting an asynchronous electric motor into a generator.
The basis was taken from an electric motor of a washing machine with a power of 180 Watts produced in China in the early 90s of the last century.
I ordered magnets from NPK Magnets and Systems LLC, I had already bought magnets during construction before wind farm. Neodymium magnets, magnet size 20x10x5. The cost of 32 pieces of magnets with delivery is 1240 rubles.
The alteration of the rotor consisted of removing the core layer (deepening). Neodymium magnets will be installed in the resulting recess. First, 2 mm of the core was removed on a lathe - the protrusion above the side cheeks. Then a 5 mm recess was made for the neodymium magnets. The result of the rotor modification can be seen in the photograph.
Having measured the circumference of the resulting rotor, we made necessary calculations, after which a strip template was made from tin. Using a template, the rotor was divided into equal parts. Neodymium magnets will then be glued between the risks.
8 magnets were used per pole. There are a total of 4 poles on the rotor. Using a compass and marker, all magnets were labeled for convenience. The magnets were glued to the rotor with “Superglue”. I will say that this is a painstaking task. The magnets are very strong, I had to hold them tightly when gluing. There were times when magnets came off, pinched fingers, and glue flew into my eyes. Therefore, you need to use safety glasses when gluing magnets.
I decided to fill the cavity between the magnets with epoxy resin. To do this, the rotor with magnets was wrapped in several layers of paper. The paper is secured with tape. The ends are covered with plasticine for additional sealing. A hole is cut in the shell. A neck is made of plasticine around the hole. Epoxy resin was poured into the shell hole.
After hardening epoxy resin, the shell has been removed. The rotor is clamped into the drill chuck for subsequent processing. Grinding was carried out sandpaper medium grit.
There were 4 wires coming out of the electric motor. I found a working winding and cut off the wires from the starting winding. I installed new bearings because the old ones were a bit stiff to rotate. The bolts that tighten the body are also new.
The rectifier is assembled using D242 diodes; the “SOLAR” controller, purchased a few years ago on Ebay, is used as a charging controller.
Tests of the generator can be seen in the video.
To charge the battery, 3-5 revolutions of the generator are enough. At maximum speed of the drill, it was possible to squeeze 273 Volts out of the generator. Alas, the sticking is decent, so there is no point in installing such a generator on a windmill. Unless the windmill will have a large propeller or gearbox.
The generator will be located on the ski lift. Tests in field conditions already this winter.
Source www.konstantin.in
4. Connecting and adjusting the speed of the commutator motor from an automatic washing machine
Manufacturing of the regulator:
Regulator setting:
Regulator test:
Regulator on the grinder:
Download:
5. Potter's wheel from the washing machine
6. Lathe from an automatic washing machine
How to make a headstock lathe on wood from a washing machine motor. and a speed controller with power maintenance.
7. Wood splitter with a washing machine engine
The smallest single-phase, screw cleaver with a 600 W washing machine motor. with speed stabilizer
Working speed: 1000-8000 rpm.
8. Homemade concrete mixer
Simple homemade concrete mixer, consists of: a 200 liter barrel, an engine from a washing machine, a disk from a classic Lada, a gearbox made from a Zaporozhets generator, a large driven pulley from a fairy washing machine, small self-grinding pulleys, a drum pulley made from the same disk.
Prepared and put together: Maximan