How to decorate the facade of a wooden house in the most stylish way? Finishing the facade of a wooden house: materials and technologies used Cladding the facade of a house with wood.

Inexpensive and practical finish facade wooden house will allow you to tidy up old housing or create an interesting exterior for a newly built building.

Wooden houses have become very popular again, as this is one of the few ways to create environmentally friendly housing. At the same time, wood provides good thermal insulation of rooms, interesting appearance. However, not everyone is ready for what will be represented by ordinary logs.

Also, do not forget that some received wooden house(inherited or bought), which was built quite a long time ago, and the tree has already lost its appearance.

A similar phenomenon can often be encountered: without proper processing and care, wood quickly loses its attractive appearance, but at the same time its strength and other functional qualities remain at an acceptable level.

In this case, you need to take care of organizing an attractive facade. The facade of a wooden house can hide all these unpleasant consequences of wood aging, as well as protect it from the effects of negative factors.

Types of materials used

Cladding the facade of a wooden house can be done using the following materials and technologies:

Curtain façade.
Plaster.
Panels with thermal insulation and clinker tiles.
Siding.
Facade brick.

When choosing a material, you can be guided by your own preferences, cost or other qualities. If wooden walls are still strong, then everything else is not particularly important.

For a new house built of wood, it is worth noting that if you do not carry out this work, then in the future this work will cost much more: you will have to eliminate the consequences of wood wear due to exposure to the sun and other negative factors.

In addition, the tree will lose its attractiveness. Finishing the facade of a wooden house can be done independently or by specialists. It all depends on what material was chosen.

Using siding

Siding is ideal for facade finishing. It can be made of PVC or vinyl. At the same time, you can create what is needed to maintain the wood in good condition (constant ventilation helps prevent the appearance of mold and dampness).

The positive qualities of using this material include the following:

The use of this finishing method does not increase the load on the facade. The material is light in weight.
You can carry out the work yourself and in a fairly short period of time.
The cost of the material, relative to other options, is low. The cost of the material in most cases depends on the appetite of the manufacturer, since everyone uses the same base when making siding.

Facade decoration wooden houses Using this material, you can create complete ventilation of wood.

In this case, thermal insulation can be improved by using special materials– insulation – polystyrene foam or mineral wool. Thermal insulation materials create an additional layer under the siding.

Using plaster

Despite the fact that it is rarely used to create facades of wooden houses, this finishing option also has a large number of positive qualities, suitable for use in finishing private housing.

Using this material you can protect wood from exposure environment, as well as improve waterproofing and significantly insulate the house.

It is better to use plaster for cladding a timber or frame wooden house, since the plaster will not adhere securely to the logs. And get a flat surface for log walls it will be quite difficult.

Curtain facade made of metal, vinyl or porcelain stoneware

Great opportunities for updating an old house and decorating the walls of a new home are created by mounted options facade finishing. With help this method you can create wooden houses.

This finishing method received a similar name due to the fact that finishing the facade of a wooden house involves the creation of a hanging structure. Dignity curtain façade is that when creating the basis for finishing, all known finishing materials can be used.

Finishing the facade of a wooden house can be done using following types finishing materials:

allow you to get a very unusual option. However, do not forget that this material is susceptible to environmental influences.
The design of the facade of a wooden house can be organized using composite finishing material.
Plastic is often used for decoration.
Porcelain tiles are the most expensive option.

Panels may have different shape and size, and their cost varies from the smallest for vinyl siding to simply astronomical for WPC composite panels.

Facade brick as finishing

Often, facade brick is used as a finishing material, which is made specifically for similar work. It is durable and allows you to significantly increase the thermal insulation of your home.

In addition, do not forget that it is very large. The only significant disadvantages of this material are the following:

Increase in the total load on the foundation. Despite the fact that this type of brick is somewhat lighter than usual, its use significantly increases the load on the base.
Its high cost and the complexity of the work increase the cost of cladding external walls.
The complexity of the work leads to longer completion times and also requires the hiring of skilled labor.

When deciding how to decorate the facade of a wooden house, you should first of all pay attention to the following option, which is often used to update the walls of an old house.

Thermal panels with imitation clinker tiles

Thermal panels with clinker tiles can be called a modern material that can be used to decorate not only a wooden house, but also a building built from any other building material.

Its use makes it possible to significantly strengthen them; they can be fastened without the use of special materials, can last up to 30 years at temperatures from -60 to +100 degrees Celsius, and are light in weight.

At the same time, work on their fastening is carried out very quickly and without the use of special fasteners, which other technologies require.

Before deciding what to cover with, you should consider all possible options for resolving this issue, and also look at options for their use by forum members on ForumHouse.Ru, for example, or on real examples your neighbors.

Thanks to external thermal insulation, the cost of heating houses in winter period, as well as spending on air conditioning in the warm season. But when choosing insulation you need...

Wooden houses are very popular in holiday villages. They not only look very prestigious and have an individual beautiful appearance, they also have unsurpassed...

During construction or restoration country house one of the main roles is assigned external cladding buildings. The appearance of the building, as well as various technical characteristics, each of which is of no small importance, completely depends on it.

General properties and characteristics

Construction business and implementation the latest innovations goes forward. Natural wood as a cladding material country houses and cottages still remains one of the most popular and in-demand building materials.

Often, builders, using wood as a cladding material, can resort to cladding the outside of the house. This allows you to achieve a beautiful, visible result, create the look of a “Russian hut” and sheathe the house with the highest possible quality. There are many reasons, citing which we can confidently say that cladding a house is desirable, and sometimes even a mandatory construction procedure.

In addition, there are a number of factors and necessary conditions, which you should pay attention to when choosing cladding material:

Unfavorable climatic factors can always contribute to breakdowns and some kind of destruction. To avoid this, it is recommended to resort to cladding the house, preferably with additional protection against penetration by sedimentary moisture and condensation.
Thermal water and vapor permeability must be eliminated, thereby ensuring that the house is sheathed with a material that provides high-quality thermal and waterproofing.

Noise can also often be a nuisance, so you should choose a material with good sound insulation.
It happens that over time, the cladding often loses its former attractive appearance due to fading. To prevent an undesirable situation, it is recommended to choose a cladding material that will withstand the influence of sunlight and ultraviolet rays.
A fire can strike at any moment. To avoid this, there are materials for home cladding, the use of which will secure and protect your home from open fire.
Specialists often put forward requirements for the material that ensure ease of installation, as a result of which the use of special equipment is optional.

The best option, according to builders, is the choice of facing material, which primarily performs protective and aesthetic functions.

However, home owners often have to choose between reliability and aesthetics, since it is quite difficult to find a material that meets both characteristics.

Requirements for facade finishing

In order to increase the life of your home, you should take care possible influence unfavorable external factors and provide protection load-bearing structures. Good thermal insulation and vapor barrier, eliminating the possibility of moisture penetrating into the middle of the house, as well as its evaporation to the outside - these are the main goals of a well-installed house facade. Do not forget that the facade is necessary not only to protect the entire house, but also the building itself must protect the facade structure. That's why The design of the structure itself is the most important aspect in planning the entire installation.

When decorating the log walls of a building, several are most often used at once. insulating materials for the purpose of best insulation.

Weather conditions and various external factors pose a great danger to the façade during implementation. finishing works. Otherwise, you will have to return to repairing the facade every year, and the process is complex and very painstaking.

To ensure that the lining of the logs of the constructed dwelling is not damaged, needs to be addressed Special attention for various chemical protection products in order to prevent the influence of rain, winds, frost and other climatic factors. To prevent the sun's rays from having a negative impact on the cladding, after building a house from rounded timber, you can also resort to using acrylic paint on top of the facing material.

Popular types

Block house

Among modern materials for facade cladding, one of the first positions is occupied by a block house, as shown by statistics and consumer reviews. This type cladding is particularly popular in Canada and Northern Europe. The block house is used not only for cladding facades, but also for decorating interior spaces. It is a cladding board that looks like a log house.

When choosing boards for cladding, you should pay attention to the growth rings: the closer and closer they are located in relation to each other, the better and higher quality the wood is.

In addition to the fact that the block house is one of the most economical options, it is also environmentally friendly pure material having characteristic features and advantages, namely:

durability. The cladding does not crack or deform. Manufacturers guarantee that cladding with block house slats and corrugated sheets will maintain an attractive and aesthetic appearance long years;

a block house is often sheathed if necessary to hide construction defects;
This material is not characterized by mold, fungi and any rotting;
installing a facade with a slatted frame and processing it using a block house does not require special knowledge and also requires a minimum amount of time and effort;
the material has excellent waterproofing properties, especially the block house made of pine, which initially needs to be treated.

The negative aspects of using a block house include the following:

high flammability, since wood that is prone to fire is used for its manufacture;
the material has low vapor permeability, resulting in a high risk of condensation.

Lining

A good option when choosing a material for cladding the facade of a house is lining. It has high sound and heat insulation, and also gives the structure a decorative effect. This material has such obvious advantages as:

durability, as it does not rot under the influence of external factors and is not affected by a humid environment;
provides an aesthetic appearance of the building.

However, there are also negative traits given choice, namely:

needs careful care;
has a high price;
has low fire resistance;
To maintain a presentable appearance, periodic painting is necessary.

Brick

Another popular material preferred by many builders for cladding a village home is brick. The final covering of the facade with brick will give the building the most aesthetically pleasing and well-maintained appearance, however, it is worth noting that this is quite an expensive pleasure, and not everyone can afford it. As alternative option you can always resort to using facade panels under the brick. The brick cladding of the house is quite good, since this material has the following advantages:

the brick is not affected by weather conditions and other external factors that can lead to rotting of the material;

brick is not flammable, however, exposure to fire reduces its strength by more than 50%;
The material is characterized by good sound insulation.

Among the properties of brick there are negative points, such as:

has low heat-saving characteristics, as a result of which it is necessary to use additional insulation during the construction process;
high price.

Porcelain tiles

Porcelain stoneware is a popular material for cladding the facade of a house, which protects well from natural influences and external factors. Finishing with this material has an attractive and modern look. Porcelain tiles have the following advantages:

has moisture-absorbing properties, which makes it not susceptible to moisture;
mechanical impacts do not pose a danger to porcelain stoneware due to its characteristic strength and hardness;
is non-flammable and monolithic. Its design is solid and does not involve cracks.

However, despite a number of advantages, the following disadvantages of this material should also be noted:

has a high cost and is not an economical solution;
characterized by a complex and lengthy installation process.

Clinker tiles

Clinker tiles are another material that is ideal for cladding the façade of a building in a stylish and attractive way. In addition to its aesthetic and presentable appearance, this material will also provide protection from external factors and weather conditions, therefore it is distinguished by durability and quality. To make clinker tiles, shale glycine, flux and coloring pigment are used.

Manufacturers are faced with the important task of preventing even the slightest failure and performing high-quality work. Otherwise, deformation of the material will occur, and the result of work on the product will noticeably deteriorate.

Many builders give their preference to clinker tiles, because This material is in great demand due to a number of obvious advantages such as:

the use of clinker tiles provides long time exploitation thanks to its beneficial properties and high quality;
this material will not be deformed as a result of influence severe frosts and sudden temperature changes thanks to low level moisture absorption;
This material is good for its unpretentiousness and does not require special care, since little dust settles on the surface, and moss and lichens can rarely appear.

The negative characteristics of this material include the following:

special fragility, since clinker is made of ceramics;
high price.

Siding

There are many popular materials for cladding and restoration of a country house, ranging from corrugated sheeting to siding. When resorting to exterior cladding of houses, builders often opt for siding. Aesthetic appearance, high-quality thermal insulation and high strength provide this facing material with an honest and good name in the market. In appearance, the siding is a narrow strip-like panel with a punched edge and a lock-type fastening. It is often used in cases where it is necessary to hide any construction defects or damage.

The following types of siding exist:

vinyl;
wood;
cement;
steel;
aluminum;
ceramic.

Siding has a number of advantages that describe it positive characteristics, namely:

it retains its expensive and aesthetic appearance for half a century, which indicates its durability as a material. In addition, if there is siding cladding, constant painting of the coating is not necessary;
when choosing siding with installation, it is unlikely that any problems will arise, since the design does not involve complex work;
If the siding material is dirty, it can be easily cleaned with ordinary water.

Siding also has such negative qualities as:

the main part of the coatings is subject to mechanical stress;
does not have extensive color range for every taste;
high price;
vinyl siding sheets become brittle in severe frosts.

For combined buildings

A combination of facades is an excellent way to create an original, stylish and unique building. Combined facades involve division into functional areas and blocks in accordance with the different facing materials used. Having certain design ideas, you can implement unique idea, transform or recreate an interesting style of the house facade.

Today, uniform finishing of facades with cladding material has begun to be quite successfully replaced by a combined one thanks to creativity and good architectural imagination. In order to implement combined cladding, at least two types of finishing materials are used.

The combined cladding of the facades of a country house has a whole range of undeniable advantages, namely:

if you correctly combine and plaster the facing materials, you can easily change visual perception structures: lengthen, reduce, expand;
This type of installation is not labor-intensive and does not require high costs thanks to the fragmentary use of expensive high-quality materials;
An individual and original façade of the house is guaranteed.

There are many types of combinations of different materials, among which the following are worth highlighting:

finishing of different floors is welcome various materials if the house being registered is a multi-storey building;
it will look good if you whiten and highlight some parts of the building through a combination facing materials around the entire perimeter of the house.

You should pay attention to two existing technologies combinations of materials.

Vertical technology involves the use of materials in contrasting shades. An aesthetic appearance ensures the design of the entire facade using one material, and the design of any parts and elements of the building, window or doorways to others.

Horizontal design technology for combined facades is the direct selection of horizontal parts of the facade, plinths, floors, and roof. Most often, this technology is carried out with a combination of specific materials: stone and wood, brick and wood, and sometimes even tile and wood.

Installation methods

Any installation begins with the creation of a drawing and project, the necessary markings, a plan necessary for an accurate representation of all further construction work. The preparation process begins with such preliminary work as leveling the walls, removing defects and various existing roughnesses on the surface. This is directly related to the creation of the sheathing, thereby creating a distance of 5–7 cm.

Thus, all unwanted defects and irregularities will be hidden and will not remain noticeable. After creating the project, you should, focusing on it, mark the walls, install existing profiles and beacons.

It is necessary to mount the brackets so that the vertical step does not exceed 80 cm, and the horizontal step does not exceed the total value assembly seam and slab width.

One of the most important aspects quality work on façade installation is good thermal insulation, after all, this is a very significant thing that helps to significantly save money and not go broke on heating a country house. Directly for these purposes, special insulating boards are used, attached to the wall using the necessary fasteners.

It is important that between the wall and the insulation itself there is not even the most short distance. In most cases, the insulation layer is fastened using screws with a wide head or dowels. The distance from the insulation layer to the future coating varies within 50 mm.

A very important step during installation is protection against blowing.

For this purpose, a special windproof membrane is used, which is installed on top of the insulating layer itself. A significant aspect is the need to cover load-bearing profiles. For this, a plumb line is used, and it is important to control the distance between them. Fastening of profiles is often carried out using metal screws with a press washer.

Next comes the fastening of the panels themselves, the selected material for decorating the facade of a private house. To fasten the panels to the supporting profiles, special clamps or other devices are required. Their choice depends on the material used. The complexity of installing the facade of a house or reconstructing an old building depends on the facing material itself.

In order to achieve maximum quality results, it is necessary to follow a clear sequence of completing the assigned points. Otherwise, obvious defects and defects are likely to occur.

The “concrete jungle” of big cities sucks all the energy out of a person, so at least on weekends you really want to get closer to nature. It's good if you have your own dacha with wooden house or private cottage. Natural materials such a home will help you relax in environmentally friendly conditions. And there is simply nothing more comfortable than a room with wooden trim. The wooden cladding of the house will organically fit into the minimalist style of the building and will be suitable for ordinary dachas or stylized “antique” cottages.

The facade of the house can be called the calling card of every owner, so you should approach the exterior decoration of your home with complete seriousness. In addition to the aesthetically attractive appearance of the building, it is also important that the house is warm and environmentally friendly for living. That is why choose the option facade finishing made of wood.

If you build wooden frame because of high cost Because the material is not available to everyone, almost any summer resident can afford to cover their home with wooden panels. Technically, the process of exterior wood cladding is not so complicated, so even an untrained craftsman will be able to complete facade work in the shortest possible time.

Advantages and disadvantages

U wood finishing, like any other finishing material, has its pros and cons.

Among the advantages we note:

environmental friendliness;
the possibility of combination with other finishing materials in the cladding - for example, stone or brick;
the ability to “hide” defects in supporting structures and a thick layer of insulation under the tree;
with proper processing wood cladding will reliably protect the house from negative external influences;

no need to mount ventilation ducts, because wooden surface it is well ventilated;
elegance and respectability of the surface;
variety of design solutions.

There is essentially only one drawback - the flammability of a material such as wood. But it can be easily solved with the help of special protective coatings, which will have to be applied to the building from year to year.

Selecting the type of material

Before the beginning facade works decide what type of wood you will use, because each material has its own characteristics, advantages and disadvantages. Consider the general style and direction of the design so that the house looks as harmonious and impressive as possible.

The choice of wood type is very important. Do not overestimate exotic wood species - opt for Russian traditions when building log houses. Only trees growing in central Russia are suitable for any climate of our country.

Pine is soft wood, so the process of processing it is as simple as possible for the craftsman. Experts recommend using this material in humid climates, since the resinous conifers resistant to the negative effects of moisture and rotting.

The strongest and most durable wood is cedar. It is also distinguished by an unusual yellow shade, which can be effectively used when developing the design of your home.

And oak can be considered an elite material, which is not accessible to everyone due to its high cost. It is distinguished by high strength and durability, besides, oak wood can be of various shades - from golden yellow to dark brown, so you probably won’t have any problems with the choice.

Larch has very durable wood with a yellowish tint. Due to the durability of this material, it is often used for the construction of large-scale objects - for example, temples. Unfortunately, over time, under the influence of the external environment and precipitation, larch wood can darken, so take this into account when building your house.

Spruce has a light structure, sticks well, but can begin to rot over time without regular care and treatment with special products. Alder has a soft structure and is easy to work with, but is also easily susceptible to rot. Innovation in the market building materials– thermally modified wood, which is obtained after processing wood under high pressure.

Types of cladding

Exterior decoration, as is known, can be wet technology(for example, using plaster) or using hanging technology (cladding with wood panels, siding or other finishing materials).

- Block house

In appearance, this finishing material is a log treated with antiseptic and varnish, divided in half lengthwise. The flat side is attached to the facade using grooves and tenons on the sides. This installation technology allows you to assemble a house in the shortest possible time. If you use screws or nails, be sure to treat them with a special anti-corrosion compound.

- Siding

A very popular and inexpensive finishing option is wood siding. It comes in the form of a molded profile of several connected parts or can be made from a solid wooden board. And the ease of installation allows even a non-professional builder to complete the finishing - of course, with the help of competent instructions and advice from professionals that can be found on the Internet.

- Wooden shingles

The cladding with wooden shingles looks very impressive. In addition, such finishing material will significantly extend the life of the building and protect it from the effects of adverse weather conditions. Finishing such a facade can only be done by specialists who have undergone special training, so you should not experiment and save on the services of professionals.

- Thermowood

This material can be used not only for making decorative elements, for example, stairs, beams, gazebos, rafters, panels. Thermowood can also be used as a facade finishing material. Wood that has undergone special heat treatment is used to reliably protect the house from negative external influences, humidity and temperature changes. After all, since the times of Ancient Rus', burnt wood has been used to increase the strength of structures.

- Eurolining

Sheathing a building with eurolining is simple - you can do this work yourself, since the boards are connected with a tongue-and-groove fastening system. This type of exterior decoration looks beautiful and is affordable. This material is lightweight, which means more fast speed installation

- HPL panels

This material is a combined finishing raw material obtained by pressing cellulose and wood fiber, which, to increase technical characteristics impregnated with heat-shrinkable resins. This material is produced at high temperature, so the sheets are super strong.

The advantages over other materials include impact resistance and mechanical damage, and negative impact environment. This façade will serve you faithfully for many years, and maintaining it will take a minimum of time and money.

Since HPL panels are lighter compared to other facade materials, they are often used for finishing large surfaces. A wide range of colors and a rich selection of textures will allow you to choose panels to suit any interior style. Another advantage is the “self-sufficiency” of the panels, that is, you do not need plaster or additional processing such a facade.

- Ventilated facade

Another innovation is a ventilated facade, when brackets for sheathing are first mounted on the walls, then insulation and timber sheathing are installed. As a result, a kind of air cushion is formed inside, which ensures natural ventilation wooden facade.

A membrane is attached to the sheathing to protect the insulation from condensation and fungus formation. Please note that the absorbent side is attached to the wall of the house. And at the end, the wooden finishing material is fixed to the sheathing using special fasteners.

Siding

Wooden panels
Alternative decor
Combination of materials

When thinking about finishing the facade of a private house, you will note that the choice of materials is quite wide. If you want to choose the most environmentally friendly of them, pay attention to natural wood. It has numerous properties that are valued by modern people:

environmental Safety. Does not emit harmful fumes that can harm nature or humans;
attractive look. The aesthetics of wood have always been admired. Sometimes there is even a desire to preserve the natural wood grain, which is why protective coating transparent varnish is used;
durability. Despite the vulnerability of the tree to high humidity, temperature changes and sun rays, it is possible to extend its service life by using modern impregnations that guarantee high-quality protection from negative atmospheric and natural factors;
low thermal conductivity. It allows you to maintain a comfortable microclimate inside the building, saving energy resources on heating and air conditioning. By using wood for cladding, you can eliminate the need for insulation.

By finishing the facade of a house with wood, you create unique design, harmoniously combined with the decor personal plot. The building looks respectable and stylish and will not go unnoticed by passers-by and your guests.

Finishing the facade of the house: wooden siding

Represents planed molded profiles different thicknesses and length. They are made from different types of wood and differ in their level of strength and durability. The main advantage is that the house gets the opportunity to “breathe”; under the finishing there is no Greenhouse effect, capable of causing rapid damage. There is no doubt about the aesthetics of the decor, ready-made version the building takes on a unique look.

Siding is offered in several types:

fragments of boards spliced along the length, strung on a jagged tenon;
one-piece profile made from solid wood.

Profiles require coating before use protective impregnations, varnishes and paints. They must have an antiseptic effect, increase resistance to fire, and protect the tree from grinding insects. Fortunately, the range of special formulations is rich, so there are no problems with selection and purchase.

Installation easy to do yourself, without the help of specialists in the field of finishing work. You won't need specialized knowledge and skills, no years of experience required. The main thing is to follow the step-by-step process and arrange the elements according to level.

The cladding will be built as follows:

if there is old finishing material on the facade, dismantle it;
remove protruding elements: lamps, drainage systems, cornices;
clean the walls from dust and dirt;
secure with self-tapping screws to the walls wooden blocks, previously soaked protective compounds. Step – 30-40 cm, place the sheathing elements around the perimeter of the door and window openings. Remember - when horizontal laying siding bars are arranged vertically and vice versa;
fill the space between the slats with insulation, if provided. The thickness of the insulation should not exceed the height of the sheathing;
find the lowest point on the wall, draw a straight line horizontal line along the entire perimeter of the house, raising it 4 mm from the original level;
secure the starting strip with nails or self-tapping screws, placing its top edge on the drawn line;
At the joints of the walls, secure the internal and external corners, placing fasteners in 20-30 cm increments. Install J-shaped slats around door and window openings;
start installing the next strip, connecting it to the previous one using a tongue-and-groove lock, securing it on top with nails, inserting the edges into the corner joints. The siding should be slightly shorter than the distance between the stop points, so there will be room for its natural expansion under the influence of natural factors;
When fixing horizontally overlapping panels without a connecting profile, make sure that they overlap each other by 2-3 cm, and the joints are placed staggered and not on the same line;
the distance from the edge of the profile to the last fastener is no more than 8 cm;
After complete cladding, install the remaining parts intended for decorating window and door openings.

This is how the façade of houses is finished with wood. To get a detailed idea of the work process, watch the thematic video, which shows how installation is performed. Be sure to apply building level to put all the parts in the right position.

Looking through the photo of finishing the facades of a house with wood, you will note that its appearance depends on the type of wood used in production process. The optimal choice is oak. It not only looks beautiful, but is also considered the most durable and durable. As an alternative - larch, pine, spruce.

Finishing the facade of the house: facade panels

They appeared on the finishing materials market later, but quickly gained well-deserved distribution. The main advantages are maximum efficiency of cladding, minimum requirements for the professionalism of the worker, and a set of necessary tools.

When decorating, finishing the facade of the house with wood with an unusual cut is carried out according to the same scheme as in the previous version. The pitch of the sheathing profiles depends on the size of the decorative elements. You can place insulation inside or install a ventilated façade, leaving the space hollow.

Remember expansion gaps,

of a couple of millimeters. They are needed to expand the finishing, which occurs in any case, because we are talking about natural material. No matter how protected the boards are, they will change in size under the influence of atmospheric conditions.

The same principle is used to decorate the facades of houses with wood clapboards and block houses. The only difference is the appearance, which plays a key role in the choice.

Alternative decoration methods

Decorating the façade of a house with wood-like materials

Wooden products are expensive, if your budget is limited, choose a suitable alternative. For example, you can decorate the facade of the house with wood-effect panels made of metal and other materials that are more resistant to different conditions external environment materials. The advantages of this solution are obvious:

thanks to modern technologies, used by specialized factories in the production process, it is possible to obtain a finish that has no visual differences from its natural counterpart. The difference will be noticeable only if you get close to the building and start looking closely at the cladding;
due to the availability of raw materials, the cost finished products will pleasantly surprise you and will allow you to save on purchases without sacrificing quality;
you don’t have to worry about preparatory treatment of the decor with protective impregnations, varnishes and paints;
the weight of the panels is less, which will simplify working with them and minimize the load on the building and foundation;
a wide selection will allow you to decide on best product, corresponding to existing requirements and wishes.

View photos of finishing the facade of a private house with wood and alternative materials, stylized as wood. You can see that there are no visual differences. Instead, you don’t have to be afraid of rot, mold, wood-boring insects, heavy rains and severe frosts. Modern artificial cladding options are not susceptible to their influence and can easily withstand any operating conditions.

Even more aesthetics

Decorating the facade of the house - a combined option

Do you want unique accommodation?? Are you looking for an exclusive design? A combination of finishing materials will help here. The decoration of the facade of the house looks very nice and a tree. Today they sell different plaster mixtures allowing to obtain a smooth or rough surface. They also differ in composition; according to this criterion, the following plasters are distinguished:

mineral - based on ordinary Portland cement with coloring pigments and other additives. They are the most durable and affordable from a financial point of view, they are not afraid of fungus, mold, water, insects;
silicone ones are very expensive, but fully justify the purchase. Vapor permeable, environmentally friendly, elastic, have the ability to self-clean;
silicate - the main component is potassium glass. Due to low elasticity, they are suitable for hard, non-deformable surfaces;
acrylic - plastic and durable mixtures that can last for many years. Resistant to stains and not afraid of water.

Plaster mixtures are applied by spraying, after which they are leveled using the rule. You can spray the plaster manually or with a special machine. In the first case, the process is labor-intensive and time-consuming. But if there is no way out, it is possible to cope with it. Once dry, the coatings are sanded to a perfectly smooth surface or processed with special spatulas to obtain decorative grooves. After complete drying, they are painted in the selected color.

The decoration of the facade of the house with stone and wood looks great. Natural stone is heavy and expensive, creating a significant load on the structure. Some of its species crumble, are afraid of the sun, and cannot tolerate harmful external factors.

Choose the artificial option

It is cheaper, but will not be inferior in performance and durability, because specialized factories do everything possible to achieve maximum practicality levels and put them into production Newest technologies and raw materials. The stone is offered in a huge number of colors and textures. In this design, your home will stand out against the background of neighboring buildings and will become unique and stylish.

Regardless of where your gaze lands, decorative finishing the facade of the house with wood is the right decision, especially if you value environmental friendliness, comfort and coziness. This is exactly what suburban housing should look like in order to fully justify its construction and financial investment.

When deciding on the second material, assess the situation globally. Consider the subtleties of design local area, the solutions applied here. All elements must be in harmony with each other, creating a single composition.