In creating a cozy atmosphere in a country house, the decoration of the walls in the country house plays a significant role. As a final decorative finishing You can use materials of varying costs.
In the case where the work will be carried out in a seasonal house in which there is no constant heating, preference is given to budget options.
When purchasing a finishing material, it is important to understand whether it can be used in conditions of high humidity, which are inevitable in unheated rooms.
Material selection criteria
Choose a material that is easy to install and repair In addition to the presence or absence of a heating system, when choosing decorative finishes, it is necessary to take into account the base material of the walls. As the most suitable solutions For finishing a country house for seasonal use, the following are recommended:
| Wall base | Finishing option | Nuances |
|---|---|---|
| Brick | Wet plaster | In an unheated room, condensation will collect on a brick wall, so it is recommended to use moisture-resistant materials. |
| Aerated concrete | Gypsum plaster, GKL, lining | In central and northern latitudes, it is worth installing a layer of thermal insulation under the plaster. |
| Foam concrete | Vapor-proof materials, e.g. oil paint | Foam blocks have a high level of hydroscopicity, so it is better to treat the walls with a deep penetration primer in several layers. |
| Frame structure | OSB | The sheets will strengthen the strength of the frame and improve hydro- and thermal insulation. Wallpaper or paint is suitable for finishing. |
| Glued laminated timber | GKL, wall panels | Wooden houses make it possible not to finish the walls inside the building. Finishing is used to improve heat and sound insulation. |
| Rounded timber | Varnish, wax | Does not require any finishing. |
Before decorating the walls of your dacha, you should think about the future interior design.
Those who are addicted and dynamic people it is better to choose a finishing method that allows you to easily change finishing layer. For such owners, it would be more correct to choose plaster or gypsum plasterboard sheets as the interior decoration of the walls at the dacha. For a perennial option, it is better to choose a finish with a soft texture and color.
Preparation
Finishing begins with the rooms on the top floor Finishing is the final stage in the repair, therefore it is carried out after all the work on laying engineering and plumbing communications has been carried out. When deciding to purchase material, you should remember the specifics of unheated rooms.
Any finishing begins from the back room of the upper floor and is carried out towards the exit. If work is carried out with a high degree of soiling: plastering, painting, whitewashing, then the already treated surfaces should be protected with plastic film.
Finishing with natural materials
Any finishing material must rest for room temperature There are quite a few or . Modern technological finishing materials offer various options coverings, for example, wood wallpaper, which is made from natural wood. They are applied to the walls of the cottage indoors using a special adhesive solution. The main and very significant disadvantage is their cost.
The finishing method will be less expensive interior walls houses with block house material. Before installing the slabs, you should let it rest indoors at room temperature for 48 hours. The material is mounted on flat walls, on pre-filled beams wooden frame.
Inexpensive material finishing will be fiberboard The elements are screwed to the guides with self-tapping screws through the base of the tenon, which all boards are equipped with. The elements are connected to each other using a groove-tenon system. To give additional external gloss, upon completion of the work, the surface can be coated with varnish, wax or stain.
Lining is one of the easiest materials to work with, a way to inexpensively cover the walls of a country house with your own hands. This results in a completely environmentally friendly and clean finish. The lining is mounted by stuffing slats onto horizontal guides, fixed at a distance of 0.5 - 0.7 m from each other. For more information about how and how to decorate a country house, watch this video:
The wood must first be treated with antiseptic and fire-retardant compounds.
Budget solution
When deciding what to cover the walls of your dacha with, you should study the possibilities of various materials:
| Material | Characteristic | Application specifics |
|---|---|---|
| GKL | Weak vapor permeability, low fracture strength, afraid of moisture. | Not suitable for unheated country houses. |
| GVL | Durable, moisture-resistant, flexible, contains reinforcing fibers. | Not afraid of moisture and temperature changes. |
| MDF | Low plasticity, hydroscopicity, environmental friendliness, shape stability. | Not used in areas with a high level of fire hazard. |
| Plywood | Flexible, hydroscopic and durable. | With proper processing it has almost no restrictions. |
When deciding how to decorate the interior walls of a dacha, if the country house is not heated, give preference to moisture-resistant materials: laminate, plasterboard, plastic,. The sheets chosen are moisture-resistant GVL; they differ in color from gypsum plasterboard.
Laminate and plastic are installed using a technology similar to installing lining.
Experts do not recommend gluing wallpaper in unheated rooms. If you want to make the interior colorful and bright, it is better to use acrylic paints.
Most people rightly consider a dacha to be the best place to relax, so they try with all their might to make it as comfortable as possible. However, when decorating the walls in a dacha, it is important not to turn it into another apartment, but to make the interior diametrically opposed. However, in most cases you have to start from the financial side of the issue, forgetting about the psychology of the interior. In this article we will tell you how and with what help you can turn any dacha into a cozy place where you want to spend every minute of your free time.
Ideas for decorating walls in a country house
Every city dweller wants to escape from the hustle and bustle of the city from time to time in order to feel unity with nature and himself. For many, a dacha is just such a “rescue island”, so it is very important to pay maximum attention to its interior and exterior decoration. Your psychological state and level of comfort during your vacation directly depend on what materials and technologies you use.
Use of load-bearing structures
Before you start decorating the walls of your dacha with your own hands, take a careful look around - perhaps the very structure of the house already hints at what can be reduced renovation work to a minimum, benefiting from existing surfaces. Very often people do not notice that they can be used beneficially in the interior. structural elements houses: beams, partitions, rafters or walls themselves.
This type of finishing is best achieved in timber and log houses, since working with wood is simple and pleasant - you just need to clean the surface, treat it with an antiseptic and varnish it. If desired, you can artificially age the wood or tint it with stain to imitate an expensive species.
If the house has an attic, do not hesitate to use rafters and ceiling beams to create the interior. Many people simply cover them with boards or plasterboard, forming a familiar and boring ceiling, but why deliberately reduce the space when you can enjoy the space and beautifully decorate the rafters by decorating them with lighting fixtures or decorative elements. Try painting them with a paint that contrasts with the rest of the surfaces. To enhance thermal insulation, lay insulation between the rafters, and then sew up these gaps with boards, clapboard or a block house that imitates timber. To visually expand the space even more, place the planks not across the rafters, but along them. Add any wood trim Can be decorative natural or artificial stone. These two natural materials combine perfectly with each other and create a favorable, calm atmosphere in the house.
If your dacha is built of brick, its structural elements can also be advantageously presented as decorative ones. For example, try leaving brick wall without finishing, having cleaned its surface, processed the seams and covered it with a protective varnish. All that remains is to complement the interior with metal accessories, place a glass table, a vintage clothes hanger or a minimalist iron sculpture, and you will get a stylish loft-style room. If the brick is not sanded with sandpaper, but left as is, you can create an imitation of ancient masonry and decorate the interior accordingly. Naturally, the cost of such “finishing” will be scanty.
Wood finishing
Wood finishing is the most common option for a summer house. Most suitable material is wooden lining, because it not only looks attractive, but is also strong, durable and easy to install. Even the smallest cottage can be turned into a cozy “nest” using natural wood lining, and if you cover it with a special transparent impregnation, you can emphasize the unique natural pattern.
If you have always dreamed of living in log cabin, but fate was only generous with a brick or concrete dacha, cover the walls with a block house to create the effect log walls. But it is best, of course, to use materials made from natural wood, since only in this case can you count on a unique atmosphere that can only reign in a wooden house.
Wood can be used not only for direct wall cladding, but also to change the geometry of rooms. So, for example, you can build niches and shelves while covering walls, creating decorative surface and adding a functional element to the interior. This way, you will avoid additional expenses on purchasing furniture and save free space. Wood is an ideal material for decorating small spaces, as it allows you to use all the “non-working” corners.
Plywood, as a derived wood material, is also often used for interior wall decoration in the country house. It is inexpensive, creates a perfectly flat surface, and helps to quickly and efficiently cover the thermal insulation. Plywood bends well, which means it can be used to build arched passages. In most cases, plywood sheets require subsequent decorative finishing, but there are models with a beautiful wood texture that can simply be varnished. Painting plywood is no different from painting regular wood: cover it with impregnation, stain, apply paint or varnish.
Helpful advice: Previously, all the walls in the room were finished the same way, and this is still considered normal. But in fairness, it is worth noting that this is a very outdated method. Try to “dilute” a similar interior by covering one of the walls not with wood, but, say, decorative stone or paint. This option will look much more interesting and dynamic. As an option, you can also use wooden material, but of a different type, for example, cork or laminate.
Painting the walls
Painting walls is one of the simplest and fastest ways to decorate walls in a country house. The cost of such an undertaking is also low, so many thrifty owners prefer paint to other materials.
A wide selection of various compositions allows you to make repairs in any room with different operational features. So, there are paints for dry rooms or rooms with high humidity levels, for children's rooms, bedrooms, etc. The article “Paint for walls: tips for choosing” will help you figure this out. How to choose and use paint correctly different rooms, described in detail in the articles “Painting walls in the bathroom: step-by-step instruction", "Painting walls in the kitchen: step-by-step instructions", and "Painting walls with your own hands."
Let us briefly consider the types of paint used for wall decoration:
- Water-based is a budget option for those who want to make quick and accurate repairs. The paint consists of natural ingredients and is therefore completely safe for people, animals and the environment. Proof of this is the almost complete absence of odor. The water emulsion is sold in buckets of 1 liter and above and is white in color. To get the desired shade, you need to tint it by adding a special liquid pigment.
- Acrylic – quick drying paint without smell. Among the main advantages, it is also worth noting the widest color palette, bright, saturated shades. The paint has water-repellent properties, but is not intended for extremely wet areas.
- Latex – latex-based interior paints are more resistant to contact with water, moreover, they can be washed and are completely harmless to health. For this reason latex paints They are often used to decorate the walls of a dacha in the kitchen and nursery.
- Decorative - a series of paints that can imitate various surfaces: masonry, silk, stone, sand, etc.
Wall paneling
Plastic panels do not create such a cozy atmosphere in the house as wood or brickwork, but they are very inexpensive and help to quickly disguise wall defects. This is one of the most common methods of interior and exterior wall decoration in a country house. The price of panels depends on their composition, thickness and other technical characteristics. The main advantage of this material is that to install it there is no need to carefully level the walls, as is necessary, for example, for painting. 
Another important advantage of plastic panels is that they can withstand high humidity, which cannot be said about wood. There are different types of panels for interior and exterior decoration, but recently siding designed for facades can increasingly be found inside the house. It looks good on verandas, kitchens, and attics. At the same time, craftsmen use only vinyl models, leaving hardware for external cladding.
The panels are also favored by the variety of textures and colors, which allows you not only to choose an option to suit your taste and any interior, but also to advantageously combine different panels to achieve an original effect. How to install siding is described in detail in the articles “Plastic siding: selection and installation” and “Metal siding. Installation instructions".
We have listed only a few options for interior and exterior decoration. country house, but there are many more materials and methods. You can decorate the walls with decorative stone, plaster, wallpaper, tiles - everything is limited only by your imagination and budget.
Features of wall decoration in the country
As you know, home decoration can be interior and exterior. In this chapter we will look in detail at how each of the processes occurs using the example of using one of the most popular materials - plaster. Depending on the composition, it can be used both inside and outside the house. Facade plaster contains special components that prevent destruction from atmospheric and mechanical influences. In addition to the composition of the mixtures, the technologies for their application also differ.
Interior wall decoration
Any hardworking owner can cope with applying plaster to the wall, but the only prerequisite is that the solution should be applied to a flat surface. If the walls are yours country house made of brick or have chips and cracks, they must first be leveled. To do this, you can use one of the types of plasters, plywood or drywall. Leveling with plaster mortar is advisable if the horizontal surface differences are no more than 4-5 cm. Otherwise, the consumption of the mixture will be too large, and a thick layer may fall off under its own weight. In such situations, it is better to level the walls with sheet material: plywood or plasterboard.
If the wall is smooth and you just decide to change the finish, clean the surface from the previous coating (wallpaper, whitewash, plaster) with a wire brush, then cover it with several layers of adhesive primer. If you are renovating your kitchen or your cottage is located in a region with high humidity, it is better to additionally impregnate the walls with antiseptics and strengthen the waterproofing. For concrete walls We can recommend a waterproof deep penetration primer.
Let us briefly consider what types of plaster there are:
After treating the entire wall decorative plaster you need to leave it to dry for 8-12 hours, then walk over the surface with fine-grained sandpaper to remove dried drops of the solution. Next, you can start painting or protect the plaster with a water-repellent agent.
Exterior wall decoration
You should begin exterior decoration of the walls of a country house only after installing thermal insulation, and this is best done outside. Firstly, this way you will save useful living space, and secondly, you will avoid dampening of the walls due to the dew point moving inside under the insulation. The articles “Insulating a wooden house with your own hands” and “Insulating the facade of a house with foam plastic” will help you with this.
The quality of work depends 70% on the right materials. So, in addition to special facade plaster, you will need a facade reinforcing mesh that will firmly hold the mortar on the wall and will not allow it to fall off due to humidity or gusts of wind.
Kinds external plaster:
- Acrylic is convenient because it does not require kneading and is ready for use, which allows you to avoid mistakes. The solutions have good vapor permeability and enhance the heat and sound insulation of the house. It is quite elastic, which means it can evenly cover surfaces of any configuration. The large palette makes you forget about the typical white houses and paint your dacha in any color.
- Silicone is good because it reliably protects walls from moisture penetration, but does not interfere with vapor permeability. Creates a dense elastic layer that can be washed and constantly maintain the cleanliness of the facade. The only drawback is the high cost.
- Silicate – plaster based on liquid glass. Mainly used for finishing facades made of cellular concrete, because it fills all the cracks and voids, creating a dense but vapor-permeable barrier to water.
- Mineral – high-strength cement plaster. It is cheaper than all of the above analogues, but it is not elastic or attractive, and therefore requires skills in application and subsequent finishing. It is mainly used to level the façade and enhance the thermal insulation of walls.
Regardless of the type of plaster chosen, it is necessary to first prepare the wall. First, assess its condition, if necessary, fill cracks, chips, and remove the previous coating. If the wall is not insulated, install thermal insulation material: mineral wool, polystyrene foam or its derivatives. For better adhesion of the plaster to the surface, the wall must be primed. For concrete, use a special Betacontact primer.
The application technology depends on the purpose of the plaster. So, if you are dealing with decorative mortar, the principle of operation is no different from interior finishing, where you operate a “trowel” and a spatula. If plaster is needed for leveling, you first need to install beacons and work according to building rules. You will find more information on this topic in the article “How to properly level walls.” 
Helpful advice: Facade works Should only be carried out in dry and warm weather to allow the plaster to dry properly, so check the forecast for the next few days.
A video about decorating walls in a dacha will summarize the above information:
Wall decoration at the dacha: photo
stroiremdoma.ru
How to cover the walls of a dacha inside inexpensively, maintain style and clean environment indoors
At the dacha you can relax not only from the city noise and bustle. Fresh air is an integral part of outdoor recreation. Many are tormented by the question of how to cover the walls of a dacha inside inexpensively and maintain comfort. For this purpose it is used environmentally friendly material, able to endure the unheated winter period without cost. It is advisable to preserve the natural, country style of finishing.
Decorating the walls in the house with clapboard Why did my friend and I start studying materials?
Wall finishing with laminate Vadik and I each have several aunties who have no one to help except their nephews. At the beginning of spring we began to prepare for summer season. We need to start putting the dachas in order. The most labor-intensive work was finishing the walls inside. It is necessary to choose a material that allows the walls to breathe. It is advisable to maintain the design style.
The task was complicated by the fact that no one lived at the dacha in winter. The room was not heated. Our relatives could not spend a lot of money on decorating the inside. We will do the work ourselves, but we need to purchase the material inexpensively. It is easier to choose a combination of price and quality than the cost of the material and its naturalness and environmental friendliness.
I told Vadik about different finishing materials for wooden houses. As a result, he compiled a table that can be used as a basis when choosing an option for sheathing. wooden walls in the country.
Decorating walls in a house with plasterboard | Positive qualities of the material | Negative qualities of cladding | Where finishing should not be applied |
| drywall | ||
| price | hygroscopicity low vapor permeability | at seasonal dachas |
| ease of installation | need for plastering | in buildings that have not shrinked |
| low vapor permeability | ||
| gypsum fiber sheets | ||
| price | destruction at joints | Unheated dachas |
| flexibility | reduced vapor permeability | did not shrink |
| easy installation | reduction in environmental friendliness | |
| laminate | ||
| durability | the walls don't breathe | unheated rooms |
| high cost of installation and materials | bedrooms and children's rooms | |
| cork panels | ||
| environmentally friendly | very expensive | in damp areas |
| durable | fragile | boiler rooms |
| aesthetically pleasing | ||
| lining | ||
| ecologically pure material | high price | boiler rooms |
| durability | fire hazard | damp areas |
| plastic | ||
| aesthetic appearance | ||
| MDF | ||
| average cost | low ductility | seasonal buildings |
| environmental friendliness | hygroscopicity | damp areas |
| high vapor permeability | fire hazardous areas | |
| no deformation | ||
| plywood | ||
| plastic | presence of glue | in damp areas |
| naturalness | hygroscopicity | |
| price | sealing joints | |
| OSB boards | ||
| environmental friendliness | contains formaldehyde | bedrooms |
| no deformation | cutting dust | children's rooms |
| low cost | ||
| wooden lining | ||
| naturalness | breaks down due to temperature changes | Unheated premises |
| easy to process | lit | |
| aesthetic appearance | ||
| block house | ||
| average cost | difficult installation on the casing | damp rooms |
| natural wood | ||
| aesthetic appearance | ||
| glass magnesium sheet | ||
| cheap | requires coverage | children's rooms |
| easy | low vapor permeability | bedrooms |
| flexible |
Natural materials are more expensive. Savings are achieved due to the lack of finishing of the walls after cladding. There is no need to plaster, glue or paint.
Advantages and Disadvantages of Solid Wood
Wood paneling Wood is a warm and clean material. For many years, after construction is completed, it fills the inside of the house with its aroma. To finish the walls, it is necessary to take into account the shrinkage of the new structure and the constant expansion of the logs with changes in humidity and temperature. Timber and boards play less.
The disadvantage of natural material for finishing the walls of a summer house is its high cost. To make it inexpensively, you can use scraps of lining and substandard materials and make it yourself. The work becomes more complicated, it is necessary to eliminate defects and select the size. The beauty of the design is preserved. You can attach the board to wooden walls using self-tapping screws without a frame. Brick and plastered surfaces should be sheathed with profiles or slats.
Finishing with slabs made of chips, shavings and sawdust Wall finishing can be done inexpensively with slabs made from waste wood. OSB boards are pressed from wood chips. Glue made from natural ingredients is used as a connecting material. For finishing they have a number of advantages over other materials:
- vapor permeability is close to solid wood;
- do not deform from moisture - multi-directional fibers;
- flexible, does not collapse when walls shrink;
- holds fasteners well;
- has an aesthetic appearance;
- easy to process.
We cover the walls with OSB
The disadvantage is the formaldehyde content, especially in moisture-resistant slabs for the kitchen and bathroom. Supports combustion. When sawing, fine dust is generated. You must wear a respirator.
We sheathed OSB in all the rooms, except the bedrooms, in the country house, which is used seasonally. Its construction was completed last year, and the house was shrinking. A finish was needed that would withstand deformation.
MDF boards do not contain harmful substances. Sawdust ground into dust is glued together with tree resin. My friend and I chose a material with veneer cladding and lined the inside walls in the country house where my aunt lives all year round. The house has heating and was built more than five years ago.
Plywood finishing for painting and wallpaper
Wall decoration with plywood In apartments and houses with constant heating, plasterboard is often used to level the walls. The slabs have smooth surface and under the wallpaper it is enough to putty only the joints and dents from the screws. fasten large sheets You can go straight to the walls if they are smooth. Gypsum does not allow air to pass through well and swells from moisture. Therefore, for an unheated dacha, the walls of which are made of logs, it must be laid in several layers, according to a sliding pattern. Plaster and protective paint exclude the term “inexpensive”.
Vadik is a mathematician. He calculated possible options. We finished some of the rooms at his aunt's dacha as a block house. Dense pressed wood is not afraid of temperature changes and moisture. Protective impregnations are introduced into the composition during manufacturing. For internal cladding, you need to take panels with a small profile.
Wall decoration with plywood for painting or wallpaper In the bedrooms, at the request of a relative, we did the finishing acrylic paint. We used plywood. It is made of several layers of veneer directed perpendicularly. This eliminates warping. At the same time, the material is a good heat insulator. Withstands wall deformation. Can be mounted without a frame.
The ends of the cut sheets were coated with a protective antipyrine mixture. Now moisture will not penetrate. The top was primed. The joints and screw heads were filled with putty. Used for paint white soil.
(3 ratings, average: 4.67 out of 5) Loading...
delaydachu.ru
How to decorate the walls at the dacha
Exterior decoration of a country house. Exterior finishing country house building performs two functions at once - decorative and protective, so it is recommended to take this stage of repairing a country house responsibly. It is necessary to begin rough finishing work only after the shrinkage of the house is completed, that is, a year after construction.
The foundation of a country house and ground floor can be finished with various materials. For example, natural stone, a completely natural material, harmonizes perfectly with wood and allows you to decorate your home in the same style. Except their own decorative functions Natural stone is highly durable and perfectly protects the foundation of the entire building.
How to decorate the walls of a dacha other than clapboard
The choice of material for wall decoration depends largely on the type of material from which the house is made. If it is timber, then finishing the walls of the dacha consists of sanding and impregnating the house with various special protective compounds. Use paint or any finishing materials in in this case Not recommended.
Exterior finishing of wooden frame houses consists of lining them with various lumber. In addition to the lining, there may be the so-called and popular today Block House. The latter will allow you to create the illusion of a house built from expensive logs. Block House is a specially sawn board that imitates solid timber. Moreover, this material is affordable and easy to use.
In some cases, siding is used to decorate a frame wooden house, which is mounted on special brackets. With this finishing material you can not only give an elegant appearance country house, but also to update the look of old wooden houses that have stood for decades.
Back to contents
How to decorate the walls of a dacha inside
Until recently, repairs, namely interior wall decoration, included such a labor-intensive and expensive operation as leveling. For these purposes, various leveling mixtures were used, the work with which was highly labor-intensive and took a lot of time. In the late nineties, plasterboard appeared on the construction market, which significantly changed the technology for leveling surfaces.
Back to contents
How to decorate walls in a dacha inexpensively
In the huge range of finishing materials for exterior use, curtain panels are practically in first place. They have a lot of advantages. Environmentally friendly, as clean and safe raw materials are used in the production of materials. Aesthetics. Manufacturers' catalogs present panels different designs And color range. Their installation allows you to radically transform the facade of the house, giving it the strict monumentality and sophistication that are so valued today. Texture. Modern facade panels imitating stone or brick completely imitate the structure natural materials. Manufacturability. Facing materials are easy to machining. You can adjust them to the required sizes using construction knife and other tools. High strength. Curtain facades can be used for decades. Some manufacturers provide a lifetime warranty on their products. Resistance to external factors. Colored cladding will not lose its richness even when exposed to moisture and ultraviolet radiation. Thermal insulation characteristics. After installation curtain facades heat losses will be reduced by 30-40 percent. Additional insulation no external walls are required.
How to decorate walls in an unheated cottage
Leading manufacturers are constantly improving the quality of their products. Consumers can save a lot on the cost of finishing work on the outside of their home. You can fasten the facade panels yourself: detailed instructions are included with them. The entire process will take no more than five days.
The demand for this type of decorative finishing is constantly growing, which is largely due to its versatility. Finishing work is carried out at any temperature, since the slabs are not afraid of moisture, wind and sudden temperature fluctuations.
Back to contents
What is the best way to decorate the walls in a dacha?
Installation facade cladding- this is insulation and finishing at the same time. But the buyer pays for the building material only once. Significant savings are also provided by affordable prices for decorative facade tiles. When compared with the cost of cladding a house with brick or flagstone, the costs of acquisition and installation facade panels will cost twice as much. This is the minimum.
prof-kirpich.ru
Decorating a garden house with your own hands | Construction portal
Entering almost every garden house, you can see a copy of a city apartment. Summer residents drag into the garden house all the furniture that has outlived its useful life in the house. This is what is most offensive of all, since the habitat itself speaks of giving a dacha dwelling an individual appearance. Sometimes you really want to create a living environment that is completely opposite in style and spirit to the city. And in order to achieve this effect, it is worthwhile to carefully think through the procedure for finishing the garden house.
External facade finishing
Outer side A garden house requires special attention; landscaping and decoration gives the building an individual appearance. Finishing the façade from a technical point of view is also necessary to preserve warmth inside the house. The simplest and most inexpensive finishing method is painting. Also, before painting the facades, you need to cover all protruding parts (belts, window drains, sandriks) with iron. The humidity of plastered surfaces before painting should not be more than 8%, wooden surfaces - 12%.
If the surface moisture level is higher, it is necessary to use only lime paint. If the humidity is within normal limits, paint of different compositions can be used to decorate the garden house - oil, varnish, synthetic, lime, cement.
The outer surface of the building is pre-dried, cleaned of dirt, dust, drips and splashes of mortar, efflorescence and grease stains, the rough surface of the plaster is smoothed, small cracks are expanded and puttied. Then the surfaces need to be primed and then you can safely apply paint twice. If you choose lime or cement composition, the surfaces do not need to be primed, they should simply be moistened with water.
It is recommended to dry the wooden surface before painting, otherwise the paint will begin to peel off in the first year. Cut out knots and tars, embroider cracks, fill embroidered and cut-out areas with putty, remove burrs and chips. If the facades of the garden house have been painted previously, clean them of old paint and putty. It is customary to apply paint to a wooden surface in 2 layers, the second layer must be done only after the first has dried.
Metal surfaces, if there are any on the facade of the garden house, they can also be painted. Before painting, remove scale and stains mineral oils and flaking rust. Be sure to coat the seams and ridges of steel roofs with red lead putty, especially carefully in gutters and valleys. Paint metal fences 2 times with enamel and oil paints.
If you are looking for something to cover a garden house with, you can use various means: porcelain stoneware panels, clinker and glazed tiles. Currently, the facades of dachas can be finished with thermal panels, placing them on the external walls. Today in building materials stores you can choose thermal panels according to your wallet and your taste.
Floor finishing and staircase arrangement
The floor in garden houses is most often made of plank or linoleum. However, it is better to give preference to the plank one, as it is more attractive. The wooden floor should not be painted with oil paint; it is better to soak it 3 times with hot drying oil and preserve the natural color of the wood. Plank floors are laid only after all carpentry work, having cleared the underground of debris.
To avoid cracks in the seams of plank floors, it is recommended to use high-quality dry lumber, which has a small width of 90-150 millimeters, and protect it from possible moisture during work. For plank floors, you can take boards made of soft wood (spruce, pine) about 25-45 millimeters thick. Connect adjacent boards tightly together or in quarters, tongue-and-groove or on slats.
It is necessary to start laying floors from the walls. Nail the first board to the beams. After this, lay another 3-4 boards without piercing with nails. Then, using wedges and iron staples that are driven into the beams, they press the boards tightly against one another, drive the nails in, remove the staples and continue to work in this sequence. The joining of the floors must be done after they have completely dried (usually this is done a year after the floor is installed), so no more than one-fourth of the boards are nailed to the beams during the initial laying.
You can also install plank floors using short planks. To do this, first lay long boards along the beams and along the walls, and then place short ones between them in tongue and groove according to the intended pattern, resulting in frieze floors. Among other things, plank floors can be made from pre-prepared panels that measure 1 by 1 meter and are made from 2 rows of slats.
The top row is made of boards about 100 millimeters wide and 20 millimeters thick; for the bottom row, you can use lower quality slats, which are located perpendicular to the top ones. Stuff the slats in such a way that you get quarters on all 4 sides of the shield. Skirting boards are installed after the finishing of the wall surfaces and the placement of door frames.
For garden houses, you can create parquet floors that are made from panels and staves from dismantled buildings. Typically, finished shields measure 140 by 140 centimeters. Parquet floors must be laid in complete panels together with parts called extensions.
You can make panels directly on the construction site using foundation boards and parquet staves. Wide centerpieces must be made so that the shield can be sawed in half. If the width of the shield corresponds to the distance between the beams, they are mounted without sheathing.
The basis for a parquet floor made from individual staves can be a continuous flooring made from boards approximately 35-40 millimeters thick and no more than 12 centimeters wide. It is customary to leave a gap of up to 10 millimeters between the boards. Lay paper or thin construction cardboard between the parquet and the flooring. After laying, carry out continuous shaving and sanding; during the procedure, moisten the parquet with water.
Linoleum must be laid on a continuous plank flooring. Before sticking, the material is cut into pieces that correspond to the size of the room, with a small allowance of 5-10 centimeters. Lay the cut pieces loosely for 5-6 days, after which you can stick them with special glue and mastic.
In utility rooms, make floors from asphalt, colored concrete, ceramic tiles, brick or polymer material. When making an asphalt or colored concrete floor, beacons are placed, along which the horizontal surface of the floor is straightened.
If you have built a two-story garden house, for communication between floors you need to equip a staircase. At dachas, a one- or two-flight staircase is usually installed. In addition, it is customary to use a staircase of a special design - a spiral one, with winder steps. Most of the flight steps rest on one or two beams.
Marches stationary stairs Most often, 2 strings are made from boards that are at least 700 millimeters thick. Grooves about 2.5-3 centimeters deep are made into them, into which steps and risers made from five-centimeter boards are inserted. Stair railings are made of wood. A wooden balustrade is sometimes used as a fence.
Stairs should be safe and comfortable. Therefore, the height of the step should be no less than 15 and no more than 18 centimeters. In one flight, provide at least 5 steps, and the height of the fences of platforms and flights - not lower than 90 centimeters. Make steps and platforms with a slope of 1-1.5% to ensure water drainage during cleaning. To maintain the integrity of the edges of the steps, slightly round the wooden treads or chamfer them by 5 millimeters.
If you need a staircase to the attic of a garden house that you will not use often, give preference to an extension wooden stairs. Such stairs consist of 2 beams, which are approximately 40-60 centimeters behind each other. At intervals of 40 centimeters, crossbars are hammered or cut into them, which will serve as steps.
In exceptional cases, deck stairs are installed in a garden house, which consist of two steep strings, into which board steps are cut or nailed at vertical intervals of 30 centimeters. Spiral staircases are made from standard wooden elements. However, such designs are not entirely convenient, although they take up little space.
Finishing and pasting of walls
The walls in garden houses are often covered with wallpaper or painted and coated with bronze. All this is very economical, but you need to take into account certain features of these premises. The main difference between such buildings and permanently inhabited areas is the sudden changes in moisture and temperature. Such interior decoration of a garden house, if it is not heated in winter, quickly deteriorates, it has to be redone often, and the wallpaper quickly peels off when there is high humidity.
Considering this circumstance, interior lining prepared for painting with waterproofing compounds. Only in this case can you start decorating the garden house with wallpaper. For residential premises, ordinary paper wallpaper should be used. Utility rooms (kitchen, corridor) are covered with oilcloth and polymer-based wallpaper. The permissible humidity of the surface to be glued is no more than 12% for wood and 8% for other materials. Before wallpapering, it is customary to cover a wooden surface with cardboard and be sure to glue the joints with paper.
Surfaces that are plastered or lined with gypsum fiber or wood fiber sheets must be dried, cleaned, glued with paste and covered with paper. Surfaces that are lined with sheets of gypsum plaster must be glued with paste. Defective areas and seams between sheets are first puttied and covered with paper.
It is recommended to use paste for pasting. Phenol (up to 0.02%) is added to the solution as an antiseptic and technical borax (up to 0.2%) as an insecticide. When pasting overlapping panels, begin to place them away from the window so that the top panel does not cast a shadow. The ends run behind the trim and baseboards. The gaps between them are filled with putty.
However, it is much more practical and beautiful to reveal the natural structural material of the wall. If the house is made of logs, there is no need to plaster the walls, paste them over or veneer them, because the wood already looks great. But remember that walls made of logs need an appropriate decorative solution for the interior of a garden house, which requires the presence of simplified furniture, textile products made according to folk motifs, bright dishes, forged metal elements, and bright dishes.
You can also make the walls of your garden house from face bricks with jointing or from natural stone. If the walls and interior partitions are made from waste wood or ancient boxes, they will have to be plastered with high-quality material.
One of the most practical types of wall decoration in a garden house is considered to be cladding made of boards, which gives the premises coziness and is functionally justified because it protects the walls from dirt and damage. Common finishing materials are lining, blockhouse, and timber simulator. In this case, the house will always have a dry and favorable atmosphere, since the wood breathes, removing harmful elements and excess moisture.
It is recommended to cover the kitchen with materials that do not absorb vapors and odors, for example, gypsum fiber sheets. Don't confuse it with drywall. Gypsum fiber sheets are good because they are quite durable. They can be painted and tiles are often glued onto them. They withstand changes in moisture and temperature, have low thermal conductivity, improving the thermal properties of the dacha. And what is very important, the price of GVL is a little more than one hundred rubles per square meter.
Sometimes plywood is used to cover the inside of a garden house. It is best to take a thin one - 4-6 millimeters. The use of thicker material is not economically viable because it becomes more expensive gypsum fiber sheets. And the cheapest facing material for decorating a garden house is MDF in sheets - pressed paper fiber that has a gray-brown color. It can be left in its original form or painted. Light wall cladding will go well with light wood furniture.
Ceiling decoration in a garden house
In most cases, a garden house is a wooden structure with beams and protruding areas on the ceiling. Depending on the interior design, such a ceiling can be left as is, simply by treating the surface with a special paint and varnish composition. As a result, you will get a relief ceiling that looks natural, in country style.
The ceiling in the garden house can be plastered. The plaster is applied over brickwork, mesh or shingles, it is applied in 2 layers, over a metal mesh - 3. The surface on which you will apply plaster mortar(except for masonry), you need to cover it with shingles in 2 directions or cover it with a metal mesh with cells measuring 10 millimeters.
Along the first tentorium, while it has not yet set, furrows are drawn in two directions for better adhesion to the second layer. The composition of a regular cement mortar for plaster is as follows: 1 part cement, 3-5 parts sifted sand by volume, 0.25 parts lime paste. Instead of sand, you can use a fine fraction of perlite (0.5 cm) or marble in the same volume. Also budget option is whitewashing the ceiling, but it is still inferior to the previous options in terms of durability and decorativeness.
In addition, you can decorate the ceiling in the garden house with clapboard. In this way, it will be possible to divide the ceiling in a building into several functional zones. If you space different areas vertically, you can make a multi-level ceiling. After determining the design, you need to mark the ceiling with a marker or colored chalk, or you can even use a sharp piece of red brick.
Use the same lining as boards for the frame. Sort after purchase and separate possible products with defects - wane, cracks, non-grooving and blue discoloration. If you bought high-quality lining, you can use cheaper boards. But be sure to be planed and dried. It is recommended to treat the frame boards with an antiseptic. The direction of the frame should be perpendicular to the sheathing boards.
After preliminary painting, begin decorating the garden house and its ceiling with clapboards yourself. Carry out installation, constantly checking the parallelism of the rows. Along the perimeter, leave a gap of 15-20 millimeters between the lining “carpet” and the wall. Point the comb towards the wall and drive the nail into the tongue at an angle. Next, insert the comb into the tongue new board, also hammer nails into the tongue and groove. After installing the lining, you need to nail the baseboards, secure false beams and other decorative elements.
You can also make a suspended ceiling in your garden house. Its advantages are that it can withstand negative temperatures and do not change their properties under the influence of moisture. This is the most good option for houses that are not heated in winter. You can also decorate the ceiling with plastic panels, but remember that plastic is a poorly breathable material, under which mold can form. Also, the ceiling in the country house can be covered with plasterboard.
Functional zoning of a garden house
After building a dacha, the question immediately arises of how to decorate a garden house. When creating the interior of such buildings, summer residents try to rationally use its already small area, while maintaining comfortable living conditions and satisfying aesthetic needs. This is all achievable with a reasonable division of the dacha into functional zones.
common room
Even a small garden house includes premises that are necessary for family life, running a household and household. This is a glazed veranda, living rooms and utility rooms. At the dacha, the living quarters are represented by a bedroom and a common room. The common room is considered the main one and, as a rule, has largest area. Usually it is located on the ground floor or in the attic and is intended for relaxation and communication between family members, receiving guests, and in the cold season it acts as a dining room.
IN common room often have a sleeping place. It is best for this purpose to recreate an alcove, which is located in the side and depth of the room. It is recommended to illuminate it with direct light. For one bed, the depth of the alcove is at least 1.2 meters, for two – 2.1 meters. In this room you need to allocate space for a dining table. Through this room you can make an exit to adjacent rooms, but it is better to separate them with a sliding partition so that they can be used together or separately.
Bedroom
Bedrooms in garden houses are usually compact in size; they are placed on the first floors or in the attics, if it is a two-room house. These rooms are usually elongated, but their depth should not be more than twice the width. When located on an extended wall of the front door, you can conveniently place beds and have space for a work table near the window.
The installation of built-in wardrobes and wardrobes for bedrooms has special meaning. However, when the cabinet doors open into the room, it will be difficult to rationally arrange the furniture in it. Therefore, it is more convenient to take them out into the airlocks bordering the rooms, as in the photo of the interiors of garden houses.
Other premises
The functions of a living room are often performed by a glazed veranda, which is suitable for relaxing, eating and working. In rainy or hot weather it also becomes common. It is customary to allocate space on its square for a dining table.
In garden houses, you can rationally use additional rooms. In aisle areas, make shallow shelving and shelves along the walls that are suspended from the ceiling or mounted above a person’s height. Such devices are capable of giving the device expressiveness and plasticity.
In a garden house there is an area that is inconvenient for use, for example, the space under the stairs, the place where the ceiling meets the floor in the attic. But these meters can also be adapted for work purposes by setting up a mini workshop for various crafts, a place for needlework, reading and sewing, a pantry, a small summer garden with perennial plants or bouquets of flowers.
Furniture and lighting
All rooms of a garden house built according to a standard design can be furnished with traditional furniture. But the relatively small areas of the rooms and the seasonality of their use cause some inconvenience in using the headsets. Here it is advisable to install transformable and built-in furniture, as well as interior partitions.
Do-it-yourself Russian mini-stove at the dacha
At the dacha you can relax not only from the city noise and bustle. Clean air is an integral part of outdoor recreation. Many are tormented by the question of how to cover the walls of a dacha inside inexpensively and maintain comfort. For this purpose, an environmentally friendly material is used that can easily withstand the winter unheated period. It is advisable to preserve the natural, country style of finishing.
Why did my friend and I start studying materials?
Vadik and I each have several aunties who have no one to help except their nephews. At the beginning of spring, we began to prepare for the summer season. We need to start putting the dachas in order. The most labor-intensive work was finishing the walls inside. It is necessary to choose a material that allows the walls to breathe. It is advisable to maintain the design style.
The task was complicated by the fact that no one lived at the dacha in winter. The room was not heated. Our relatives could not spend a lot of money on decorating the inside. We will do the work ourselves, but we need to purchase the material inexpensively. It is easier to choose a combination of price and quality than the cost of the material and its naturalness and environmental friendliness.
I told Vadik about different finishing materials for wooden houses. As a result, he compiled a table that can be used as a basis when choosing an option for covering wooden walls in a country house.
| Positive qualities of the material | Negative qualities of cladding | Where finishing should not be applied |
| drywall | ||
| price | hygroscopicity low vapor permeability | at seasonal dachas |
| ease of installation | need for plastering | in buildings that have not shrinked |
| low vapor permeability | ||
| gypsum fiber sheets | ||
| price | destruction at joints | Unheated dachas |
| flexibility | reduced vapor permeability | did not shrink |
| easy installation | reduction in environmental friendliness | |
| laminate | ||
| durability | the walls don't breathe | unheated rooms |
| high cost of installation and materials | bedrooms and children's rooms | |
| cork panels | ||
| environmentally friendly | very expensive | in damp areas |
| durable | fragile | boiler rooms |
| aesthetically pleasing | ||
| lining | ||
| environmentally friendly material | high price | boiler rooms |
| durability | fire hazard | damp areas |
| plastic | ||
| aesthetic appearance | ||
| MDF | ||
| average cost | low ductility | seasonal buildings |
| environmental friendliness | hygroscopicity | damp areas |
| high vapor permeability | fire hazardous areas | |
| no deformation | ||
| plywood | ||
| plastic | presence of glue | in damp areas |
| naturalness | hygroscopicity | |
| price | sealing joints | |
| OSB boards | ||
| environmental friendliness | contains formaldehyde | bedrooms |
| no deformation | cutting dust | children's rooms |
| low cost | ||
| wooden lining | ||
| naturalness | breaks down due to temperature changes | Unheated premises |
| easy to process | lit | |
| aesthetic appearance | ||
| block house | ||
| average cost | difficult installation on the casing | damp rooms |
| natural wood | ||
| aesthetic appearance | ||
| glass magnesium sheet | ||
| cheap | requires coverage | children's rooms |
| easy | low vapor permeability | bedrooms |
| flexible |
Natural materials are more expensive. Savings are achieved due to the lack of finishing of the walls after cladding. There is no need to plaster, glue or paint.
Advantages and Disadvantages of Solid Wood
Wood is a warm and clean material. For many years, after construction is completed, it fills the inside of the house with its aroma. To finish the walls, it is necessary to take into account the shrinkage of the new structure and the constant expansion of the logs with changes in humidity and temperature. Timber and boards play less.
The disadvantage of natural material for finishing the walls of a summer house is its high cost. To make it inexpensively, you can use scraps of lining and substandard materials and make it yourself. The work becomes more complicated, it is necessary to eliminate defects and select the size. The beauty of the design is preserved. You can attach the board to wooden walls using self-tapping screws without a frame. Brick and plastered surfaces should be sheathed with profiles or slats.
To protect against moisture, wood trim is impregnated with protective compounds. The coverage is updated regularly. In a dacha that is not heated, after a year.
Finishing with slabs made of chips, shavings and sawdust
Finishing with slabs made of chips, shavings and sawdust
Wall finishing can be done inexpensively with slabs made from waste wood. OSB boards are pressed from wood chips. Glue made from natural ingredients is used as a connecting material. For finishing they have a number of advantages over other materials:
- vapor permeability is close to solid wood;
- do not deform from moisture - multi-directional fibers;
- flexible, does not collapse when walls shrink;
- holds fasteners well;
- has an aesthetic appearance;
- easy to process.
The disadvantage is the formaldehyde content, especially in moisture-resistant slabs for the kitchen and bathroom. Supports combustion. When sawing, fine dust is generated. You must wear a respirator.
We sheathed OSB in all the rooms, except the bedrooms, in the country house, which is used seasonally. Its construction was completed last year, and the house was shrinking. A finish was needed that would withstand deformation.
MDF boards do not contain harmful substances. Sawdust ground into dust is glued together with tree resin. My friend and I chose a material with veneer cladding and lined the inside walls in the country house where my aunt lives all year round. The house has heating and was built more than five years ago.
Plywood finishing for painting and wallpaper
In apartments and houses with constant heating, plasterboard is often used to level the walls. The slabs have a smooth surface and it is enough to putty only the joints and dents from the screws under the wallpaper. Large sheets can be attached directly to the walls if they are level. Gypsum does not allow air to pass through well and swells from moisture. Therefore, for an unheated dacha, the walls of which are made of logs, it must be laid in several layers, according to a sliding pattern. Plaster and protective paint eliminate the term “inexpensive.”
Interior decoration home renovation has some differences from apartment renovation. The scope of work is more impressive, and the action plan must be thought out in advance. It is important to choose the right finishing materials and follow the work technology.
If it is decided to separate interior space in his country house, it's worth getting acquainted with some tips professional builders, and also see photos of finished works. If you make a harmonious combination of materials, finishing the interior of a country house will give the room coziness. A photo of the decoration of a country house inside an economy class will help solve the problem of choosing the style and materials of cladding various surfaces.
Popular materials
Finishing wall coverings are installed after installation of communication networks, as well as after insulation of the surface. You should choose a specific material only taking into account the following characteristics:
- available budget;
- building type;
- purpose of the room.
Such factors should be taken into account before you start decorating the walls.
You can decorate the walls in a private house with several materials. There are many popular options, each of which has many advantages. Most often, the following is used to decorate the walls of a building:
- tree;
- PVC panels;
- wallpaper - you can save a lot of money on this material;
- ceramic tile;
- decorative plaster.
It is worth considering each material in more detail.
Tree
Quite often, summer residents completely cover their walls with clapboard. This material is relatively inexpensive and easy to install. When installing lining in a room, a special comfort is created. In addition to this type of wall decoration with wood, a block house or imitation timber is often used.
Many owners of private houses think that when cladding walls using wood, the interior will take on a monotonous look. However, this can be called a myth. There are many techniques that allow you to advantageously combine this material with other types of finishes. Sheathing can be done in different directions. In addition, the walls can be painted.
PVC panels
This option for wall decoration is ideal for economy class renovations. The costs of this solution are quite small. This coating is inexpensive and practical. It is quick to install and easy to clean. A large selection of colors allows you to find perfect option to create an original interior.
For example, such material can perfectly imitate wood. When covering various surfaces plastic panels many problems are solved at once. The costs are minimal. When choosing this material, the surface must be leveled. As a result, the interior takes on a noble appearance.
Wall decoration with PVC panels that imitate wooden boards can be combined with vintage-style furniture. It is better to choose this material if you need to decorate a summer cottage. This is due to the fact that the material is quite fragile. In addition, it does not provide the required level of thermal insulation.
Decorative plaster
High-quality but expensive material is used for interior decoration. Thanks to the use of decorative plaster, the surface of the walls is visually leveled. At the same time, small defects are hidden, and the wall can be painted in any shade. In addition, the resulting texture is quite unusual. Caring for walls lined with decorative plaster is quite simple. It can be used for rooms with high humidity.
Wallpaper
This type of wall decoration is traditional. It is in demand not only among owners of city apartments, but also among owners of cottages and dachas. Wallpaper can be chosen to suit every taste, which opens up ample opportunities for creating original design. However, after several years of operation, the wall cladding will have to be completely changed.
If the room is unheated, it is better not to glue wallpaper. They can deteriorate after just six months. This is due to temperature changes and dampness of the walls. As a result of such influences, bubbles appear on the wallpaper. Therefore, it is better to glue wallpaper in rooms with working heating.
It should also be remembered possible finishing walls with bamboo wallpaper. This material is quite unusual. It consists of thin pieces of bamboo that are placed on a fabric base. This wallpaper is very easy to clean. In addition, they do not lose brightness and are resistant to mechanical damage. They are often used to decorate kitchens and hallways. Bamboo wallpaper are characterized by high price and complexity of installation.
Ceramic tile
It is more practical to decorate the kitchen backsplash and bathroom using ceramic tiles. You can highlight certain parts of the room, focusing attention on them using mosaics. If all the walls are completely covered with tiles, the room will look uncomfortable.
Ceiling materials
If the attic space is combined with a living area, it must be reliably insulated and the roof must be protected from leaks. This will create a cozy space.
Tree
Both the walls and the ceiling can be finished with imitation timber, clapboard or block house. There are also quite interesting combinations. Meet various combinations. For example, you can decorate the ceiling with clapboard and the walls with a block house. In some interiors, the ceiling is decorated with wood and the walls with another material.
Drywall
This material is quite quick and easy to attach to various surfaces. When using drywall, the walls and ceiling can be perfectly aligned. It is possible to create multi-level steps and bends of different shapes. When choosing this material you can save a lot.
Stretch ceiling
When using a tension structure, ceiling repairs are performed almost instantly. Some companies begin work on finishing the ceiling in this way already 2 days after receiving the order.
The surface of the ceiling is perfectly smooth. Thanks to this solution, you can successfully hide communications. Stretch ceilings are becoming increasingly popular. An interesting option is the one that combines stretch ceiling and drywall.
Choosing a floor covering
There are a lot of materials used for floor finishing. Among them, the most popular are wood, ceramic tiles, laminate, linoleum, and carpet. Each material requires special care. Features of operation different surfaces you need to find out before going to the hardware store. With this approach to choosing a coating, you can save a lot.
Wood
In a private home, such material can be used as flooring. They are ideal for floor surfaces. Wood is able to retain heat, has high aesthetic properties and is environmentally friendly. In case of budget finishing the choice falls on regular boards. At proper preparation and installation, they are able to preserve the “naturalness” of the interior and last for many decades.
A more expensive option is parquet boards. It is characterized by increased strength and visual appeal. However, even such material must be treated with protective compounds. This measure is mandatory. Many owners of country houses save on repairs by choosing wood.
Laminate
In private homes that are intended for all-season living, laminate flooring is often installed. It is produced in various color and texture options. For this reason, you can find a suitable option for your home. Many owners of private buildings resort to installing this flooring.
Ceramic tile
This material is usually used for finishing floor surfaces in bathrooms and hallways. Quite often, tiles are also used for residential premises. On the market you can find a version of ceramic tiles made to look like wood. When choosing this finishing option, the floor is as durable as possible.
If you lay a heated floor system under such tiles, you will get a fairly practical coating. Outwardly, it will resemble a parquet board. In terms of strength and durability, such a floor is not inferior to high-quality wood.
Carpet
This coating is often used for finishing floors in heated houses where people constantly live. If you install carpet in unheated rooms, it will become damp and rot. Carpet attracts the attention of rodents.
Linoleum
This coating is inexpensive but practical. Today there are many options for such material, having a variety of visual finishes. However, a heating system cannot be installed under such a floor. Linoleum, which imitates parquet, will harmoniously fit into a classic interior. If you choose linoleum, you can save a lot on floor repairs.
Decoration of various rooms
When choosing a material for a particular room, it is worth considering its purpose. There are several tips to consider when creating high-quality flooring:
- For rooms where humidity is high, you should choose moisture-resistant coatings. They should wash well.
- For residential premises, the construction market offers a large selection of materials. You can choose products for the living room, bedroom, nursery or hallway.
- Floor coverings should be selected in the same way - for rooms with high humidity - resistant to damage and moisture.
Such features must be taken into account when choosing coverings for the ceiling, walls and floors. If you choose the right materials for various coatings, you can save money on home renovations.
conclusions
The decoration of the premises is carried out not only taking into account the purpose of the various rooms, but also the cost of various materials. Internal cladding of various surfaces is a rather labor-intensive and time-consuming process. The choice of material for finishing a country house must be carried out taking into account the characteristics and properties of various types of coating.