How to remove plastic door? Detailed instructions for removing balcony and entrance plastic doors and replacing hinges.

How take off plastic door

In the near future, the installation of plastic and metal-plastic doors. But in order to operate, repair and regulate them, you need certain knowledge and abilities.

Hinges for plastic doors – their main component – have a complex structure. If you understand the hinge structure, then you will simply understand how to remove a plastic door.

The hinge consists of the iron insert of the door part;
the frame part, in which the pins for fastening are integrated;
spacer sleeve, which is located between the frame and door parts.

The hinge components in a plastic door are designed to ensure a tight fit of the door to the frame, free and smooth opening and closing of the door.

By adjusting the hinges, you can move the door slightly in any direction. Why is this necessary? If you need to achieve a tighter fit of the door, for smooth operation of the lock or lock. Here we take a closer look at adjusting the plastic door.

Horizontal adjustment is carried out using a hinge template (iron tab).
Vertically, you can use special adjustment screws hidden under decorative caps.

Needs lubrication at times door hinges to increase the reliability, strength and durability of the product.

Highlight different types hinges, which are determined by the fastening of the hinge on the profile, the type of door, and the requirements for hinges. You can distinguish between costly and applied loops.

For plastic doors to the balcony, an expensive type of hinge is used. When installing, you need to pay close attention to the correspondence between the location of the loop fastening and the installation location of the iron amplifiers located in the PVC profile.

Butt hinges are used for pendulum plastic doors, which are installed in places where there is a lot of human traffic. Such hinges are combined with the function of an automatic closer, which closes the doors without human effort. Installing the closer on iron door It works according to the same principle as for plastic.

What to pay attention to when choosing hinges

When choosing hinges for plastic doors, take into account the following points:

what is the design of the frame and sash profiles,
is the amplifier in the profile,
what is the thickness of the profile walls,
the size and weight of the sashes,
how the doors will open.

If all these points are taken into account, then the selected hinges will last a long time and provide better job doors. Most importantly, of course, they are very durable and reliable; the material used is Teflon. But there are also bad fittings with defects. Then the question may arise about removing the plastic door to replace the hinges.

How to remove a balcony door(1)

We kindly ask the viewers who benefited from my video, in solving the problem, please review...

How to remove a plastic window sash

How take off plastic window sash or doors: https://www.youtube.com/watch?v=gnlzb9UrwTQ Greetings everyone! In that

The design of the door is designed in such a way that, at a technical level, it does not cause huge difficulties in replacing a failed hinge. You can use the following tools - pliers or side cutters, a puncher and a hammer. It would be great to study the instructions in advance, which will describe the installation of hinges on doors. Then, after removing the door, you can immediately begin replacing the hinge without wasting time, knowing the sequence of actions.

How to remove a plastic balcony door

First you need to remove the caps that cover the hinge mechanism.

Now you can carefully place a punch or hammer and slowly knock out the axial mechanism. At the same time, the door should be closed, but not completely closed (by turning the handle).

A part of the axial mechanism will appear at the bottom of the loop; it needs to be grabbed with narrow pliers and pulled down until it completely appears from the groove.

Then you need to tilt the door towards you. Because she is very languid, you need to firmly hold the door. Raising it a couple of cm (about 5), the lower support pin is released. In plastic doors, the lower hinges are not secured by anything, so when you lift the door and move it to the side, it simply comes off.

After which you can begin replacing the old loops with new ones according to the instructions. Having changed everything necessary, you need to return the door to its original position.

To do this, lift the door again by approximately 5 cm and place it on the support pin.

Then the lower hinge spring is inserted into the support pin. Again, the door is not locked one hundred percent by turning the handle, but must be closed all the way. The axial cylinder is inserted from below into the hinge hole, taking into account the flat edge on the cylinder.

By now pressing upward on the cylinder itself, its uniform exit from the loop mechanism is achieved. Naturally, it should not come out completely, but only peek out 5 mm on both sides of the loop above the edge of the top loop.

The door installation ends with the installation of decorative plugs.

How to remove a plastic entrance door

Removing the plastic entrance door from its hinges occurs a little differently, because... These doors have differences with balcony, interior and other plastic doors. The entrance doors have a reinforced structure and no double-glazed windows. The hinges in such doors are also different, because... here you need reinforced hinges and special anti-burglary devices.

Loops in front door no longer two, but three, because the frame design door leaf more rigid. As the weight of the door increases, the load on the hinges also increases. Due to the enormous pressure on the hinge design elements, the possibility of hardware failure increases, which happens quite often. Available fittings quickly break down, and there is a need to replace them.

It is worth noting that plastic entrance doors can be removed by analogy with ordinary plastic doors.

The only difference is that you can’t handle it alone - the door is very heavy, and it’s better to call a helper to help you.

Metal-plastic doors are becoming increasingly popular, and they are even heavier than just plastic entrance doors. Therefore, metal-plastic entrance doors have hinges with stronger and reliable design. But the design of the hinges of a metal-plastic door is actually no different from the design of an ordinary plastic door, although there is an additional load on their parts and components.

It turns out that the design of the hinges of metal-plastic doors is similar to the reinforced hinges on plastic entrance doors.

It can be noted that if the design is not different, then the method of removing the door will be virtually the same. Therefore, to resolve the issue of removing a metal-plastic entrance door, you need to use the above procedure.

Very often, when using PVC products, homeowners are faced with the question of how to remove a plastic door from its hinges. When performing this procedure, you should remember that everything should be done carefully so as not to damage the integrity of the structure. Plastic doors can be found in any residential or public space, where they act as an entrance element. In some apartments and cottages they serve as an integral part of the balcony block.

General characteristics of the door structure

The mechanism of plastic doors is quite simple. It includes a box and a canvas reinforced with three or four loops. The panel is made of PVC and has a frame made of durable metal. Removal and reinstallation is best done with an assistant.

Durable and strong hinges for plastic doors are complex; they are made of Teflon. It is very important to deal with them internal structure so that the structure can be easily dismantled later. The loop consists of the following elements:

door part liner;
frame element with pins for fastening;
a movable and adjustable bushing located between the frame and door parts.

The loops are equidistant from each other. This helps to distribute the load evenly. The upper and lower elements are installed along the line of the box. In order to disguise the fittings, plastic caps are usually placed over the hinges. In this case, the structure looks solid.

Loop mechanisms can be:

overhead (for balcony doors);
applied (for pendulum);
card: fixed and removable;
mortise: simple and bolted;
invisible;
screw-in (for light canvases weighing up to 25 kilograms).

The choice of hinges is determined by the type of structure and profiles of the frame with the sashes, the presence of a reinforcement, the thickness of its walls and the way in which the sashes will open and close.

Reasons for dismantling

The need to remove doors may arise for the following reasons:

Breakage or displacement of fastening elements.
Replacement of the door leaf or individual parts.
Indoor renovation.
Enlargement of the opening.
Moving large furniture.

It is important not only to carefully remove the canvas from the hinges, but also to subsequently install it in place.

Dismantling technology

Before removing a plastic balcony door, you first need to clarify the type of structure and pay attention to the details of the fittings. A simple tool is used for dismantling:

straight and Phillips screwdriver;
set of hexagons;
pliers;
wire cutters;
finisher;
mount.

The simple process of removing the door involves several steps:

All actions should not be rough or abrupt, otherwise breakage of the fittings is inevitable.

Before removing the doors, it is recommended to carefully cover the fittings from the plastic door soft material or carefully dismantle it altogether.

Reverse installation

First, you should place the canvas in the opening so that the loops can be placed on top of it without any problems. You should focus on the bottom loop. You should try to keep the canvas straight in order to prevent possible distortions. Watch a video on how to install a balcony door here:

Secondly, attach the outer loop to the support rod and adjust the position of other elements.

Thirdly, close the door without touching the handle or locking the lock.

Fourth, install the axial cylinders of each hinge in place and press on the lower pins. Its edge should go up until you hear an audible click. The end of the rod should be installed in its original position and protrude from above by approximately fifty millimeters.

You can tighten the hinges with a hex wrench

Fifthly, if the need arises, you should tighten the loops so that the canvas is level.

Sixth, put on the decorative caps and check the operation of the structure.

Before starting operation, it is useful to lubricate the hinge parts with oil or cover them with graphite shavings.

You can adjust the plastic door using a microlift and a limiter. The first device perfectly troubleshoots problems regardless of the weight and size of the canvas. It prevents very heavy door panels from sagging. The microlift takes on part of the load, but only when it is closed. It is usually presented in the form of a roller located at the bottom of the structure, or a movable plate at the top of the canvas.

The limiter helps prevent the sheet from sagging, and also determines the maximum angle of its opening, protecting the sheet from hitting the slopes.

How to fix a sagging door?

Recommended to open plastic sash and find a hexagon-shaped screw on the top hinge. Using a wrench, turn the screw 2-3 turns clockwise. Next, you need to check the overall performance.

How to eliminate side rubbing of the door leaf?

On the lower canopy with inside The door has a side screw. By screwing it in a clockwise direction, you can restore the position of the door leaf. It will no longer be able to rub against the side beam of the frame and will close easily.

How to establish tightness?

There are special eccentrics at the ends of the door. By rotating them, the door mode is adjusted. The eccentrics must be deployed under equal angles. In this case, the sash will close tightly. You should also adjust the awnings using special screws.

How to adjust the door handle?

You should move the decorative plate 90 degrees. Hidden underneath is the handle mechanism and mounting screws that need to be tightened tighter. For details on debugging plastic doors, see this video:

When removing a door from its hinges, the most important thing is not to damage the fittings, otherwise you will have to go to the store or suffer with a poorly opening door.

Plastic doors are gradually replacing other types of door models and have a complex design mechanism. Plastic sheet connected to the frame using special hinges, which are one of the main parts of the door block. During operation of a plastic door, some problems may arise in the form of mechanical damage or force majeure. In this case, repairs are required, for which you need to know how to remove a plastic door, and the removal process differs from the procedure with wooden canvas. Before you begin this work, it is advisable to read the instructions.

The plastic door block differs slightly from ordinary ones. The main elements are a box and a canvas fixed with special hinges. Usually three to four fittings are used, this makes it possible to distribute the entire load evenly.

The hinge fittings are placed at the same distance from each other, the upper and lower products are fixed in the direction of the box. Fastening elements are hidden under special linings with plastic caps, which makes door block holistic and aesthetic. Blocks often include a glass insert, which requires extreme care when dismantling and installing the panel.

The main reasons for dismantling a plastic structure

The main reasons for removing the canvas may be:

malfunctions, to troubleshoot problems when the fastener moves to the side or breaks, adjustment is required, for this it is necessary to remove it from fastening fittings;
replacing a damaged part or product when it is necessary to replace the hinges or the blade itself;
renovation of the premises to save appearance the door block must be removed and packed in protective material;
increasing the size of the doorway, the canvas is removed to expand the opening, for example, to transport large items.

Removing a plastic door can be done when replacing it, in case of renovations in the room, or if it is necessary to repair its structure.

Regardless of the reason for removing the product, the work requires extreme caution, both during dismantling and during reinstallation.

Main types of hinge fittings

Plastic door blocks are attached to the frame various types loops, which have their own technical characteristics.

The main types of fittings include:

Card. This hardware differs from standard conventional fasteners only external design. When removing, it is enough to unscrew the screws, which are clearly visible and distinguishable.
Mortise. They are rarely found on door blocks made of plastic; when dismantling, the fasteners are completely unscrewed; simply pulling them off the pin is not possible.
Screw-in. One of the more common options on balcony door, the fastener structure is similar to the card type.
Invisible fastener. An aesthetically attractive door block, labor-intensive to remove; all fasteners are hidden in a special box, so complete dismantling of the door leaf will be required.

The type of hinges is quite easy to install using visual inspection and then begin dismantling.

Balcony structure made of plastic

A plastic structure with double-glazed windows is in most cases used as a balcony. Loops for them are mainly used in two types: card and screw-in. To repair or replace the door, if necessary, you will need tools such as: screwdrivers of all types, a set of hexagons, pliers, a punch, a pry bar.

When removing the balcony door from the mounting hardware, it should be opened slightly, i.e. door handle position parallel to the floor surface. The caps must be removed from the hinges decorative look. After this, you need to insert a puncher into the upper loop fittings and carefully, without special effort knock out the axial element, otherwise the hinge mechanism may be damaged. When the edge of the connecting pin appears, pick it up with pliers and carefully remove it from the groove.

The canvas must be opened approximately ninety degrees, otherwise when removing the lower loop, it may bend. The door leaf tilts in its direction, and it is advisable to have an assistant, since the balcony door is double glazing It is heavy and if dropped, the lower mounting mechanism may be damaged. Canvas in open form rises upward by about 5 cm; for this, a lever is inserted into the locations of the lower sashes, rests against the floor surface and is moved to the ceiling. As a result of this, the fabric jumps off the pin where the lower loop is located. There are no fastenings in this place, there is only a rotation rod, which will allow you to easily remove the door.

Removal from loops occurs in a similar way. interior doors made of plastic. But before starting dismantling, you should examine the type of hinges and then determine your actions.

Upon completion of dismantling the door to the balcony, you can begin to repair its body, fittings or replace the double-glazed window. Having completed the repair work, you can begin installation in its original place. To return the canvas to the opening, you must perform all the steps in reverse order.

If the blade clings, then after installation it is necessary to carry out adjustment using special bolts. At the end of the installation and adjustment work, decorative caps are put on and the functioning of the door is checked.

Design modern apartments and houses increasingly began to involve the installation of metal-plastic or plastic door structures. But such doors require careful maintenance. From time to time it becomes necessary to dismantle them for minor repairs or adjustments. In order to do this as carefully as possible without damaging the structure, you need to know some features.

The structure of hinges for plastic doors

Hinges are an integral part of any plastic door. They have a more complex structure than their counterparts for wooden doors.

Advice! If you study and understand the structure of such a loop well, then the dismantling process door design it will become much easier.

The main components of the loop are:

Metal tab.
Frame with built-in pins. These pins are used for fastening.
The bushing located between the door part and the frame.

Thanks to this design, the hinges ensure a complete fit of the door to the frame. In addition, thanks to them, the door will close and open smoothly.

How to adjust the hinges of a plastic door?

In order for the lock on such a door to work as smoothly and without failures as possible, it is necessary to carefully adjust the hinges both horizontally and vertically.

Horizontal adjustment is carried out using a specialized template, which is a metal tab.
Vertical adjustment is carried out using screws, which are usually hidden under plugs that perform decorative function.

To ensure that the hinges serve you well long time, they need to be lubricated from time to time.

The main types of hinges intended for plastic doors

Depending on the type of fastening on the profile, there are the following types loops:

Applied. This type is most often used for pendulum-type structures. Such structures are usually installed in high traffic areas. Hinges of this type can also serve as a door closer, meaning the door will close on its own without additional effort.
Invoices. During their installation Special attention It is worth paying attention to ensure that the place of fastening in the loop clearly coincides with the place of installation of metal amplifiers, which are located in a plastic case.

Advice! Overhead hinges are best installed on doors leading to the balcony.

How not to make a mistake with the choice of loops?

In order to correctly select high-quality hinges for a plastic door, you must consider the following:

Is there an amplifier in the profile?
Type of design of sashes and profile frames.
The value of the wall thickness of each profile.
Weight and other parameters of the sashes.
Door opening mechanism.

Hinges intended for plastic doors are made of Teflon. This material provides them with durability and reliability.

How to properly replace hinges?

Even if you correctly took into account all the nuances when choosing hinges, unfortunately, no one is immune from manufacturing defects. Therefore, there may be a need to replace the hinges. To do this you will need the following devices:

Pliers with narrow jaws.
Punch or hammer.

Each set of hinges is always accompanied by detailed instructions, describing their design and installation features. Before starting work, it is necessary to study it.

In order to dismantle the plastic door leading to the balcony, you will need to perform the following operations:

After the door is removed, you can proceed to replacing the old hinges with new ones. To do this, you must carefully follow all the provisions of the instructions attached to them. After replacing the hinges, you can return the door to its place. To do this you will need to perform the following operations:

To do this, you need to lift the door and place it on the pins in the supports.
After this, the lower hinge spring should be inserted into the pin. The door must be kept slightly open.
The axial cylinder must be installed in the lower hole of the hinge.
By gradually pressing on the cylinder from bottom to top, it is necessary to ensure that it comes out of the loop structure. Make sure that the size of its protruding part does not exceed 5 cm.
The final stage of installation will be the installation of decorative caps.

What stages does the dismantling of a plastic entrance door include?

Entrance doors are much heavier and stronger than interior and balcony structures. Consequently, the process of removing them will have some features. For the front door, as a rule, specialized reinforced hinges are used, which are equipped with protection against burglary.

Three hinges are installed on the front door. They have to support quite a lot of weight of the door leaf, so the hinges must be very reliable and of high quality. You should not use cheap models, as they can break down very quickly.

The metal-plastic construction is practically no different from the plastic one. Therefore, the process of dismantling it will not differ much from that described above.

The only difference between dismantling the front door is that it is physically impossible to perform this operation alone. The door is too heavy for one person to hold. Therefore, when starting work, make sure you have an assistant.

Hide

Plastic doors require maintenance at least twice a year. This procedure includes lubrication and adjustment of moving mechanisms. Quite often it is necessary to remove the sash, however, how to remove a plastic door from its hinges , Not everyone knows. This is a simple procedure that you can learn.

Application and design of plastic door

Plastic structures are very often used in various residential buildings, are used in office premises, V production workshops. That's why knowing how to unhinge , can be quite useful. It is worth noting that plastic doors, regardless of their application, have a similar design, and the leaf will be removed in the same way.

To dismantle the door, if such a need arises, it is necessary to observe certain rules, otherwise the structure may be damaged. Before you take it to the balcony , you will need to carefully study its design, this will help you understand not only how the door hardware works, but also how it is removed. First, find out which hinges are on your door. They may be structurally different from each other.

Most plastic doors have a similar design, which is not much different from the design of a regular hinged door. The main part of any door is the frame: it is attached to the walls of the room, and the door leaf is screwed to it using hinges. It is very important that the door is installed level, only in this case the leaf will fit tightly to the frame, preventing cold and moisture from entering the room.

Plastic doors are structurally slightly different from conventional hinged hinges; they are held on a special pin that can be unscrewed, and it is not found in a regular hinged hinge. wooden door. Pay attention to how many hinges are installed on your door: usually there are three, less often four.

Many designs have glass insert, this not only significantly increases their weight, but also makes them more fragile, so you will need to be careful when removing the sash. It is most convenient to do this together.

Hinges for PVC doors are screwed at an equal distance from each other. This is important, since this arrangement allows you to evenly distribute the load from the weight of the door leaf and avoid sagging hinges. The lower and upper elements are usually located on the line of the box. They look molded, but they are not: in order to get to the hinge holding rod, you only need to remove the plastic decorative caps.

When is it necessary to remove the door?

Property owners do not always have to think about how to remove a plastic door; more often than not, maintenance is available without disassembling the structure, but in the following cases the door will have to be removed:

Some fasteners have failed and require replacement. To replace and adjust some parts, an action such as removing the plastic balcony door is required.
The canvas is damaged and requires replacement, or one of the hinges needs to be replaced.
The room is undergoing renovation work; it is necessary to protect the door from contamination and accidental damage; it prevents large objects from being carried through the doorway.
Moving furniture. It makes sense to remove the door so that it is not in the way, then install it in place.

How to remove the door correctly?

Door hinges for plastic doors are a rather delicate mechanism, so you need to handle them carefully. Removal of the canvas should proceed as follows:

The weight of the sash is large enough, do not drop it. It is better to act with an assistant.

Methods for caring for loops

If for some reason you have removed the door from its hinges, do not rush to put it back. The hinges may need some care, so taking advantage of the moment to treat them will not be a bad idea. To do this, you need to know how to lubricate the hinges of a plastic door correctly.

Rinse the removed structure from debris and dust that has accumulated in it. This can be done using gasoline.
The surface must be wiped dry and any remaining dirt removed.
After this, you can lubricate the structure with a special lubricant. It could be solid for loops or liquid, which is sold in specialized stores. The second option is the most convenient, as it is packaged in a convenient grease container, which makes it convenient to apply lubricant. This can be done even if the door is in place.

To lubricate the hinges and mechanisms of a plastic door, you must use only special oil; you should not use substances not intended for this purpose.

If you need to remove the door from its hinges, you can easily do it yourself. The procedure will not take much time. Hanging the door back is also not difficult; you will need to proceed in reverse order.

How to remove a plastic door. Repair and adjustment of plastic balcony door