Updated: 09.19.2019 12:16:31
Expert: Ilana Baum
*Review of the best sites according to the editors. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.
Not only the quality of sleep depends on a well-chosen mattress. Many people don’t think about it, covering up its shortcomings with beautiful bedding. But it is a low-quality mattress that can cause many serious diseases, while a properly selected one will serve as prevention and an important component in their treatment. complex treatment. Today you can buy different types of mattresses: with and without springs, with fillers made of coconut coir, felt, horsehair, cotton and even dried seaweed, with different degrees of hardness.
Today we will talk about springless mattresses, which have long gained popularity among lovers of healthy and sound sleep. As the name implies, they do not have springs, and layers of natural or synthetic materials act as an orthopedic block.
How to choose a springless mattress
By purchasing a high-quality springless mattress, you can forever forget about back pain, get rid of snoring and insomnia. But we will tell you below what criteria to choose this type of product.
- Size. It is considered standard: a single bed with a width of 90 cm, a 1.5-bed – 140 cm and for two sleepers – 160 cm. Today it is possible to choose mattresses of other sizes, which are also available for free sale: 80, 120, 180, 200 cm. If you need some non-standard size, then this is not a problem: many manufacturers will make a mattress according to your individual order. In length it must exceed a person’s height by at least 20 cm. The most common size is 200 cm.
- Degree of hardness. This criterion will determine how fully you can relax after a working day. If there are problems with the spine, then before you go shopping, you need to consult a specialist. The most common type is a medium-hard mattress. It suits almost all people. But soft ones are recommended for lower back pain, hard ones for problems in the upper back.
- Filling. Manufacturers select materials depending on the degree of rigidity. The most common filler is coconut coir. Latex, polyurethane foam and other materials are also used. If you have an allergic predisposition, then be sure to pay attention to the composition to eliminate irritants.
- Upper material. Jacquard is considered optimal. The fabric is wear-resistant, does not slip, and is easily cleaned from dirt, whereas cotton quickly develops pills and loses its attractive appearance. Expensive springless mattresses have special holes for ventilation on the sides - aerators. If they “do not breathe,” then there is a risk of bacteria developing and spreading.
- Smell. In theory, it shouldn't exist at all. But if there is a strong chemical smell, it means that the mattress contains synthetic materials that emit toxic substances. Definitely - it belongs in the trash, as it poses a health threat.
- Price. High-quality models for daily use may not have low price. If this is the case, then you shouldn’t buy them right away. Most likely, they use low-quality raw materials, and further use of such a mattress will lead to negative consequences. Inexpensive models purchased for the dacha or for guests, that is, for short-term use.
- Manufacturers. Just like in other industries, there are many brands in the market that produce sleep products. But if we often advise not to believe advertising, then in this case it is better to choose products from companies that everyone knows. Large well-known brands guarantee quality and safety. But when choosing completely new manufacturers, you can buy a pig in a poke.
Which is better: spring or springless mattress?
We often ask ourselves the question: which mattress is better, with or without springs? There is no definite answer, because each of them is good in its own way and has undoubted advantages. We will figure out what are the pros and cons of each type by comparing their characteristics.
|
Mattress type |
Advantages |
Flaws |
|
Springless |
Even weight distribution Convenient transportation and storage High wear resistance Silence Missing metal parts No ripple effect Does not accumulate dust inside |
High price Not intended for people weighing more than 140 kg Hard mattresses can break from excessive stress |
|
Spring |
Good orthopedic properties Variety of models from budget to luxury Strength of the metal frame Comfortable feeling while sleeping |
Springs often rattle, causing fear in children and discomfort in adults |
Rating of the best springless mattresses
| Nomination | place | Name of product | price |
| The best low-firm springless mattresses | 1 | 24,990 RUR | |
| 2 | RUR 25,674 | ||
| 3 | 6,327 ₽ | ||
| 4 | 21,990 RUR | ||
| 5 | RUR 8,453 | ||
| 6 | RUB 9,353 | ||
| 7 | 5,091 RUR | ||
| The best medium-firm springless mattresses | 1 | 11,573 RUR | |
| 2 | 12,360 RUR | ||
| 3 | 6,950 RUR | ||
| 4 | RUB 11,131 | ||
| 5 | 5,799 RUR | ||
| 6 | 4,989 RUR | ||
| The best high-firm springless mattresses | 1 | RUB 39,520 | |
| 2 | 9,200 RUR | ||
| 3 | 16,810 RUR | ||
| 4 | RUR 25,695 | ||
| 5 | 7,960 RUR |
The best low-firm springless mattresses
Soft springless mattresses are recommended for elderly people and those whose weight does not reach 55 kg. As a rule, such mattresses are filled with latex or polyurethane foam. The first material is natural product, but the mattress is also more expensive. Second - synthetic material. Minus soft models There may be a weight limit. But such springless mattresses are initially produced with this characteristic, so we will not point this out as a disadvantage. Below are the leaders in this “weight” category.
Ocean Soft is the softest springless mattress in the line, created by the famous Ormatek brand. The springless model is available in lengths of 190 or 200 cm, widths from 80 to 180 cm. The memory effect allows you to remember the original position of the human body during sleep and gives an unforgettable comfortable feeling.
A distinctive feature is the special covers made of fabric that stretches well and optimally conveys all the properties of the fillers. By evenly distributing the weight, the mattress does not exert pressure, thereby protecting the blood vessels from being squeezed and leaving the muscles in a relaxed state.
The model has a weight limit for one bed and a maximum difference in body weight for a double bed – 30 kg. The unambiguous rating of all respondents is “five”.
Advantages
- service life – 25 years;
- well-ventilated removable cover;
- several layers of filling;
- thermoregulation effect;
Flaws
- not detected.
The latex filler perfectly follows the shape of the body, has a long service life, and does not deform. Natural material guarantees safety and hypoallergenicity, good ventilation, and comfort during relaxation. A springless mattress helps to relax the muscles and lower back as much as possible, supports the thoracic region, and gives people with sore joints relief during rest.
The “Lux” cover is made of double jacquard, is highly wear-resistant, can be easily cleaned from dirt, and does not allow the sheets to wrinkle or slide off. High air permeability eliminates the occurrence of steam effect and the proliferation of microorganisms.
Advantages
- environmentally friendly filler;
- wide size range;
- cover made of thick jacquard;
- high anatomical properties;
- hypoallergenic;
Flaws
- not identified.
The springless mattress is a sofa type, so it doesn’t have any big bells and whistles, but it has everything you need for a comfortable rest. Filler – natural latex. The material has high performance characteristics. Mattresses made from it are very comfortable and provide maximum relaxation after physical activity and relieve fatigue.
Latex is highly breathable, does not absorb odors, is hypoallergenic, stops the growth of bacteria, and does not lose its qualities over time. The cotton cover is pleasant to the touch and resistant to deformation. Synthetic padding is used as a filler, which creates volume, retains heat well, is hygroscopic, and is not an allergic irritant.
The height of the mattress is 9 cm, which allows you to roll it up without any problems, it does not take up much space when stored, and is easy to transport if necessary.
Advantages
- natural latex;
- softens hard surfaces;
- easy storage and transportation;
- good ventilation;
Flaws
- not identified.
Next in the rating is a springless mattress with good orthopedic properties. Its height is 19 cm, width is from 60 to 220 cm, maximum length– 230 cm. Low rigidity is optimal for older people. The mattress will relieve muscle and joint tension, allow the cardiovascular system to function better, and will be a good preventive and therapeutic support for lower back pain.
The filling resembles a sandwich: it contains 6 layers of natural latex. This combination improves the characteristics of the material and better distributes the person’s weight. Latex is highly durable, does not sag or change shape.
The cover is made of knitwear impregnated with aloe vera, which has antibacterial and hypoallergenic properties.
Advantages
- safe filler;
- case with antibacterial impregnation;
- improved anatomical properties;
- allows air to pass through well;
- several layers;
Flaws
- not identified.
A low springless mattress is ideal for transportation, as it rolls up well and does not take up much space in the trunk. It can be used if guests decide to stay overnight, and then put it away in the pantry or any small storage compartment. It is also used to hide the unevenness of a sofa or to increase softness. sleeping place.
The filler is latex, 6 cm thick. For muscles and joints tired during the day, it serves as the best relaxing material. The good anatomical effect is due to the properties of the natural material. It is hygroscopic, hypoallergenic, does not promote the proliferation of microorganisms, and retains its original appearance for a long time.
Velcro is provided for attaching to the sofa, so the mattress will be securely fixed and will not move or crumple. The cover is made of jersey with antibacterial impregnation.
Advantages
- can be twisted;
- versatility;
- does not create a steam effect;
- wear-resistant;
- straightens out after 10 minutes;
Flaws
- not identified.
The springless sofa mattress included in the rating has good performance characteristics. It is designed to improve the quality of the sleeping place. It is based on 4 cm thick latex. It helps to gently support the body, does not form back pressure, does not compress blood vessels, promotes rapid relaxation and relieving fatigue.
Latex does not accumulate dust, does not absorb foreign odors, and does not cause irritation to sensitive people. It does not deform, so its long-term operation is guaranteed.
The cover is made of cotton jacquard impregnated with aloe vera, which eliminates the risk of mold formation, the proliferation of microorganisms, and dust mites. It is easy to put on and take off and cleans well both by hand and by machine. The fabric does not fade for a long time and is pleasant to the touch.
Advantages
- hypoallergenic filler;
- wear resistance;
- antibacterial treatment of fabric;
- removable cover;
Flaws
- not identified.
The springless memory foam mattress is designed to improve the quality of sleep; it is an additional covering for sofas and beds; it has a thickness of 4 cm. Polyurethane foam is used as filling, which remembers the position of the body during rest and creates an instant feeling of relaxation and comfort.
The material has undoubted advantages. It is highly elastic and safe for allergy sufferers. A person does not experience pressure, the mattress adapts to the curves of the body, the functioning of the cardiovascular system is not disrupted, which contributes to healthy sleep and quality rest.
The jacquard cover has a high density, allows air to pass through, absorbs moisture, and is resistant to temperature fluctuations. It is easy to care for as it can also be cleaned in a washing machine.
Advantages
- lightweight model;
- good healing effect;
- memory forms – memory effect;
- corrects the rigidity of the sleeping place;
- convenient storage;
Flaws
- not identified.
The best medium-firm springless mattresses
Springless mattresses of this type, as they say, are the golden mean. They have all the necessary properties inherent in orthopedic models and are suitable for almost everyone. The variety is due to fillers, many of which create exactly this degree of hardness. Mattresses are suitable for existing diseases and for their prevention. The rating included models with best characteristics, which were confirmed by numerous reviews.
The springless mattress has high orthopedic properties thanks to a combined filler consisting of 6 layers. One side is medium hard with a layer of natural latex. It promotes rapid relaxation and relief from fatigue. The second side is more rigid due to coconut coir. It is intended for people with problems in the upper spine.
Natural fillers are absolutely hypoallergenic, microbes do not multiply in them, and they allow air to pass through well. The cover is made of wear-resistant jacquard filled with padding polyester. It holds the sheet well, it does not slip or wrinkle during sleep.
The mattress is recognized as an undoubted bestseller, as it combines the useful functions of medium and high hardness mattresses. According to reviews, it has a long service life. The cover does not tear, the mattress itself does not deform.
Advantages
- best combination fillers;
- high wear resistance;
- allergenic materials;
- improved orthopedic properties;
- medium and high hardness;
Flaws
- not identified.
A model with available sizes: length 190-200 cm, width 80-180 cm. Limit for one sleeping place – 130 kg. A monolithic polyurethane foam slab with 5 rigidity zones was used as filling. Having a slight massage effect, the material provides good support to all parts of the body during sleep.
It instantly restores its shape and does not deform. It has been proven that its anatomical properties are perfectly preserved for 20 years. Polyurethane foam is an environmentally friendly filler. Similar in properties to natural latex, it costs an order of magnitude lower.
The cover prevents the accumulation of dust, is pleasant to the touch, and does not form pellets. Despite its large height (23 cm), the mattress can be rolled up, transported and stored in this form.
Advantages
- increased height;
- long term services;
- resistant to deformation;
- can be stored in a roll;
- 5 zones with different elasticity;
Flaws
- not identified.
The springless mattress has two levels of rigidity. So, as per your preference, you can use either the medium side or the high side with coconut layer. Filling: synthetic latex. It has high orthopedic properties, does not accumulate dust, does not absorb odors, and does not cause allergic reactions.
The medium-hard material distributes weight well, making it comfortable to sleep on your side. But the side with coir is better to choose to maintain the correct position of the spine.
The cover can be easily removed and can be cleaned in any type of machine or manually. According to reviews, the mattress serves as a full-fledged sleeping place for daily rest, it can also be rolled up and transported to the dacha, it fits freely in the trunk, and takes the correct shape 10 minutes after unrolling.
Advantages
- 2 sides: medium and hard;
- can be rolled;
- does not accumulate dust;
- high quality materials;
- environmentally friendly fillers;
Flaws
- not identified.
The next model presented in the rating can also be rolled up, which is a definite plus for transportation. It consists of three layers of synthetic foam. In the middle there is a monolithic block 14 cm thick, along the edges there are relief layers that provide a massage effect, promote better relaxation and improve the quality of sleep.
The mattress has good breathability, which reduces the risk of bacterial growth. The jacquard cover is made of cotton and blended fabrics. The material is smooth and at the same time has an anti-slip effect, preventing the sheet from creasing.
According to those surveyed, the mattress has an optimal price-quality ratio. Many noted its versatility. One mattress can be used both at home and in the country.
Advantages
- micromassage effect;
- anti-slip cover;
- convenient transportation;
- good air circulation;
Flaws
- not identified.
A high-quality combined mattress will appeal to lovers of comfortable rest. On one side there is a polyurethane foam monolith 14 cm high, which gives a medium degree of rigidity. On the other is a centimeter layer of coconut coir. It has a high level of rigidity.
Thanks to this combination, the mattress can be used by all family members, regardless of age or the presence of spinal problems. Polyurethane foam, although an artificially created material, is absolutely safe, does not cause irritation, and is highly breathable. Natural coir increases the service life of the mattress.
The cover is not removable, it is made of jacquard, which slowly gets dirty, and can be easily cleaned with a sponge dipped in soapy water. The mattress is multifunctional. It can be used as a main sleeping place, saved for guests or used as a summer cottage option.
Advantages
- 2 types of hardness;
- affordable price;
- hygroscopic;
- transportation in a roll;
- safe materials;
Flaws
- not identified.
The rating of medium-hard springless mattresses is completed by a model that combines good orthopedic properties, high performance capabilities and at the same time a very affordable price. The filling is monolithic synthetic latex - polyurethane foam. The hypoallergenic, safe material is wear-resistant, does not deform over time, does not absorb odors, does not mold, and prevents the proliferation of microorganisms and dust mites.
The mattress is not only suitable for use at home. It is compactly rolled up and transported to the country house or country house.
According to reviews, it is very comfortable for sleeping, quickly relaxes and relieves fatigue, does not require special care, suitable for all family members: children, the middle generation, and pensioners.
Advantages
- optimal rigidity;
- breathable materials;
- long service life;
- comfortable rest;
- resistance to deformation;
Flaws
- not identified.
The best high-firm springless mattresses
Springless mattresses with increased rigidity evenly distribute the weight of the sleeper and provide a smooth and hard surface. They are intended for people with large mass body, as well as with osteochondrosis and problems with posture. Pediatricians recommend using such a model in the first months of life for the correct formation of the musculoskeletal system. The main filling of mattresses is coconut coir. And the thicker the layer, the higher the rigidity.
The first place in the rating goes to a springless mattress with two degrees of hardness. Alternating layers of coconut and latex enhances orthopedic properties and increases service life. One side of the mattress is hard, the other is medium. Depending on the use case, different effects can be achieved.
The latex side promotes muscle relaxation and healthy sleep; it is often used during cold periods. Coconut - strengthens the spine, prevents the occurrence of scoliosis, ideal for the hot season. Both materials are natural and environmentally friendly.
For lovers of exclusive designs, the covers are presented in dark and light versions with exquisite ornaments. They are made from knitwear with the addition of silver threads; hypoallergenic fiber is used as a filler.
Advantages
- high orthopedic qualities;
- interesting design of the case;
- hygiene;
- natural fillers;
- 2 levels of hardness;
Flaws
- not identified.
The model was developed more than 20 years ago in Italy and became so popular that it is still produced today, with only small details added. The mattress is available in several size variations. Maximum width – 200 cm, length – 220 cm. It can support weight up to 200 kg per seat.
Made from natural latex foam, it is highly breathable, does not retain liquid or odors, does not harbor ticks, and does not allow bacteria to multiply. The mattress precisely follows the curves of the body, which increases comfort while sleeping.
A cover with different fillings allows you to use one side in the summer and the other in the cold season. For the heat ideal material will become pure natural cotton. For winter, the side with merino wool is recommended, which is absolutely hypoallergenic and retains heat well.
Advantages
Flaws
- not identified.
We included in the rating a super-hard mattress that uses only coconut coir as a filler. Multiple layers create the perfect sleeping area to keep your spine in proper shape. Coconut fiber is a natural material that provides high level rigidity. It is absolutely safe, antibacterial and hypoallergenic.
You will love this jacquard cover with its voluminous relief patterns. It does not attract dust, keeps the sheet from wrinkles, and can be easily removed from stains with a damp sponge.
A double mattress is the most suitable of all analogues on sale for married couples with a large difference in weight. Many lovers of hard sleepers noted that this is one of the best models in this segment. Moreover, all materials are natural, and the price is quite affordable.
Advantages
- maximum rigidity;
- long service life;
- recommended by orthopedists;
- embossed cover;
- high degree of comfort;
Flaws
- not identified.
Increased rigidity is due to the use of a combination of coconut fiber and thermal felt. The small height of 13 cm allows the mattress to be used on sofas and cribs. It has a good effect on the spine during the developmental period in infancy and adolescence, and is also suitable for people who prefer an elastic and smooth surface to a soft sleeping place.
Our rating is completed by a model that has two levels of rigidity: high and medium. The combined filler helps you alternate sides and get the impact that your body needs at the moment. The 18 cm thick artificial latex plate will adjust your body position and promote healthy and sound sleep. A layer of coconut fiber will increase rigidity and create all the conditions to maintain the spine in the correct shape.
The springless mattress has a high antibacterial effect, does not allow moisture to pass through, but is well ventilated, so the risk of mold and microorganisms is reduced to zero. The mattress can be rolled up with the latex side inward and transported to the country house.
According to respondents, this model is a good universal option at a low price. The ability to roll up significantly simplifies and reduces the cost of delivering the mattress from the seller, and also allows it to be transported in summer period to a country house.
Advantages
- high orthopedic properties;
- budget price;
- thick cover;
- 2 hardness options;
- breathability;
Flaws
- not identified.
Attention! This rating is subjective in nature, is not an advertisement and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.
A person who has slept well has a positive attitude, looks great, and is ready to solve the most complex production issues. Comfortable, healthy sleep depends on the right mattress, first of all, the degree of its hardness. The latter depends on the type of filler used, the presence or absence of springs.
To create conditions for a comfortable sleep, it is recommended to purchase orthopedic mattresses. Manufacturers offer them in two types:
- spring,
- springless.
The rigidity of the former is provided by springs selected in a certain way, while the latter is provided by filler, which can be natural or artificial. The materials used differ different hardness, demanding and easy to use. The service life of products also varies.
Which mattress is better - watch the video:
Spring mattresses: their types and features
Spring mattresses remain one of the most popular today. Favorable price-quality ratio, high orthopedic characteristics speak in favor of this class of sleep products.
Manufacturers offer products with two types of spring blocks:
- dependent,
- independent.
The first are based on Bonnell spring blocks, in which steel springs are connected to each other by contact. This technology simplifies production and reduces the cost (and, accordingly, the price) of products. Not high cost sleep products with dependent spring blocks can be considered their only advantage. However, for many buyers it is very significant.
Spring blocks with independent springs have recently begun to gain popularity. The special “pocket” design allows no metal parts to come into contact. When using products of this type, there is no unpleasant clanging noise, which contributes to a restful, healthy sleep. The price for them is higher, but it is customary to pay for comfort.
The positive characteristics of spring structures depend on the type of blocks used. Dependents have average orthopedic properties and moderate rigidity. After they began to use layers of fairly thick felt, the springs are practically not felt.
- mattresses with Bonnell blocks have a long service life;
- capable of withstanding significant (up to 180 kg) loads;
- independent blocks have a higher orthopedic effect;
- the ability to install a different number of springs;
- no metallic creaking;
- low (compared to other types of orthopedic mattresses) price.
- the appearance of rust on the surface of springs during operation in conditions of high humidity;
- dependent springs emit an unpleasant metallic creak and form a “wave” effect, that is, when one spring is pressed, the neighboring ones begin to move (This feature does not create comfortable conditions for a person lying next to him to sleep, while independent spring blocks do not have such an unpleasant feature).
You may be interested in learning about all the advantages and disadvantages of each spring mattress option, and decide what to choose.
Springless mattresses: varieties, features
Springless orthopedic mattresses are considered more comfortable. Various fillers allow you to create sleeping surfaces with any degree of hardness:
- soft,
- moderate,
- tough.
Springless mattresses are distinguished by the structure of the filler:
- monolithic,
- typesetting.
Another type of classification is by filler type:
- natural,
- artificial,
- combined.
- the main advantage of springless mattresses is the ability to create sleeping surfaces with different elasticity;
- as an additional pleasant bonus we can name the absence metal parts, which will rust over time;
- materials are able to provide optimal support for the spine.
- the disadvantages of springless mattresses depend on the filler material;
- inexpensive ones are affordable, but have a short service life;
- Not everyone can afford mattresses with expensive fillings, but they have a long service life while maintaining all their quality characteristics.
- Popular fillers
The most popular fillers for springless mattresses are:
- coconut fiber,
- natural latex,
- polyurethane foam (PPU),
- memorix.
Coconut
Coconut fiber (coir) is used to create sleeping surfaces with a high degree of rigidity. It is recommended for children's mattresses (including for newborns). Hard surfaces are useful for people with spinal diseases.
- natural material does not cause allergic reactions;
- ventilated;
- has hygroscopic properties.
- instability to kinks (coconut mattresses cannot be twisted).
Latex
Latex is a material with a foamy structure obtained from natural raw materials.
- has moderate elasticity;
- able to follow the contours of the body, providing the sleeper with the correct horizontal position;
- does not cause skin irritation;
- does not absorb moisture;
- thanks to the existing pores, it is perfectly ventilated;
- It does not accumulate dust, which prevents the activity of dust mites.
- natural latex has a high price, but it is fully justified by its positive characteristics.
Polyurethane foam
Polyurethane foam (PPU) is an artificial material, also known as artificial latex.
- has high orthopedic characteristics, supports the back well during sleep in the correct position, follows the contours of the body;
- hypoallergenic;
- allows air and moisture to pass through;
- the low price of the material has made it one of the most popular fillers for mattresses.
Memorix
Memorix or Memory Foam is an artificial material with a memory effect.
- follows the contours of the body and retains them for some time;
- has high orthopedic characteristics;
- does not cause allergies;
- well ventilated;
- does not absorb moisture, which prevents putrefactive processes and mold formation.
- It has a high price, but creates the most comfortable sleeping conditions.
By studying the characteristics of both types of orthopedic mattresses, you can determine which one will be ideal - spring or springless. The main criteria by which this can be determined:
- convenience,
- orthopedic indicators,
- life time,
- price.
Convenience
Comfort is an important component of healthy sleep. How comfortable a person feels on the bed depends on -
- will he get enough sleep?
- will you feel cheerful in the morning;
- Will aches and pains appear in the joints and muscles?
Body position
Correct body position is ensured by all orthopedic mattresses. The main thing is to choose models that match the weight of the sleeping person.
The choice of orthopedic mattress depends on the person’s weight. The larger it is, the harder the sleeping surface should be.
Life time
Price
Cost is one of the most important criteria choice. Many buyers prefer to find a compromise option good quality and affordable price.
Independent selection tips are presented in the video:
In order to purchase a high-quality orthopedic mattress and not regret wasted money, it is recommended to clearly understand what requirements you have for your sleeping place.
Fans of hard surfaces should pay attention to mattresses with coconut or combined latex-coconut structures. You can choose a spring mattress with a large number of springs per bed.
Fans of moderate hardness will benefit from a springless mattress with latex or memory foam. From budget models - a product filled with polyurethane foam. Spring mattresses with dependent and independent blocks also have a medium degree of hardness.
If an orthopedic mattress is purchased due to problems with the musculoskeletal system, it is recommended to undergo a medical examination and consult a doctor.
A person spends about a third of his life sleeping, so it is very important to choose the right mattress. Only in this case will a person be able to fully rest, and in the morning will be full of strength and vitality.
Modern ones are divided into two main types - spring and springless, each of which has its own advantages and disadvantages. We will look at their features and try to figure out which product is better to buy: spring or springless.
Spring
Classic products appeared about 150 years ago and still continue to be in demand due to the fact that their design is constantly being improved. They are divided into dependent and independent springs.
Dependents
The classic Bonnell addiction is the most common in the world. It consists of five-turn hourglass-shaped steel wire, 100-150 pieces per square meter, fastened together with a spiral weave and united by a common frame.
Flaws:
- The main disadvantage of addicts is lack of orthopedic properties. When a person lies down, not only those who are under the load are compressed under his weight, but also the neighboring ones. As a result, the product is not able to replicate the shape of the body.
- If two people sleep on a mattress with dependent springs, they roll towards the middle. And as soon as a person moves, his movement, like a wave, is transmitted throughout the entire product, creating "hammock effect", which also does not contribute to a comfortable sleep.
- Creak. With every movement of a sleeping person, the filler touches each other and creaks, disrupting sleep.
- Short service life. Dependents do not have a very long service life, and after just a few years the springs can “sag and dents form.”
Due to their characteristics, dependents are often used as an inexpensive option for a summer residence or for guests.
Independent
Each wire is placed in a separate fabric case and works independently of the others; pressing one of them has no effect on the others. They have a smaller diameter and, accordingly, a larger number per sq.m. compared to dependent. In a quality product, each square meter must contain at least 250 independent springs. The more of them there are, the more pronounced the orthopedic effect you will feel.
Advantages independent springs:
- Due to the fact that each wire works independently of the others, the mattress has high orthopedic characteristics, it easily adapts to the contours of the sleeper's body. Thanks to this, the human spine retains its natural curves, blood circulation in muscle tissue is not disturbed and the quality of sleep improves.
- Independent springs are separated from each other by covers, so they do not rub against each other and don't creak.
- Safe spring block design: even if one of the springs breaks, the case in which it is inserted will not allow it to pierce the product and injure a sleeping person.
- Life time on an independent spring block is higher than on a classic Bonnell block.
Flaws:
- Mattresses with independent springs: you should absolutely not jump on them or fall sharply on them.
- Production is a long and complex process, so they the cost is much higher than on a dependent block, but it pays off with the quality and durability of the design.
Springless mattresses
In them no spring block, and body support is provided exclusively by fillers, which are used: polyurethane foam, coconut fiber, natural or artificial latex, struttofiber.
- Natural latex is a material of plant origin. It is soft, elastic and durable, adapts well to the shape of the human body, creating comfortable conditions for sleep and relaxation.
- Artificial latex is an inexpensive alternative to natural latex.
- Very often, layers of latex are combined with layers of coconut coir, which allows for the necessary elasticity and rigidity of the sleeping place. Coconut coir is a natural filler made from coconut fibers. It is rigid and durable, evaporates moisture and “breathes” well. Often used for the production of children's mattresses.
- Polyurethane foam (PPU) has high elasticity and elasticity, follows the anatomical contours of the human body and provides the spine with proper support.
- Struttofiber is a synthetic filler made from polyester fiber. Vertically oriented fibers act like springs.
- Orthopedic foam with “memory effect” Memory foam is a modern artificial material of a new generation. The filler “remembers” the anatomical contours of the body under the influence of heat. The foam material guarantees an orthopedic effect.
The best solution would be to purchase a springless one that combines several materials with different properties. The combination of fillers of different levels of rigidity will provide the necessary elasticity and orthopedic effect. A universal option would be a choice with sides of different hardness.
Advantages of springless:
- Long service life, since there is no spring block that can break.
- The absence of springs guarantees noiselessness mattress.
- Excellent orthopedic qualities.
Flaws:
- A high quality springless mattress, especially one made from natural latex, will cost expensive spring analogue with the same orthopedic properties.
We hope that our advice will help you decide which mattress is better to choose: spring or springless. First of all, you need to pay attention to quality and convenience for you personally. The best criterion is to check on site before purchasing. Moreover, all sellers provide the opportunity to lie on them to evaluate its properties.
When choosing a mattress, buyers face a difficult choice. If a person understands the difference between a spring and a springless mattress, then the choice of the type of spring block confuses most buyers. Let's start with the fact that dependent and independent springs are used in the mattress. “What’s the difference?”, “Which mattress is better: with dependent or independent springs?” – here are the most popular questions for consultants furniture showrooms. We will talk about spring blocks, their varieties and design features, which one is better to choose, as well as the differences between a dependent spring block (Bonnell) and an independent one.
Springs in a mattress - their types and features
- springs made of wire of various thicknesses
- layers that give the mattress softness or hardness. A variety of materials are used for interlayers, for example, coconut fiber, sisal, wool, holofiber, felt, etc.)
- filler. The filler material can also be very different (foam, foam rubber, latex, etc.)
- The cover is made from jacquard, knitted, velor, terry, cotton and other types of fabric.
Depending on the method of manufacturing and installing springs, mattresses are divided into two groups:
- dependent spring blocks (bonnell);
- independent spring blocks.
Dependent spring block "Bonnel"
In such a mattress, all the springs are connected and interconnected. Thus, if one spring is pressed, all neighboring ones are also compressed.
Advantages of products with dependent installation of springs:
- low cost
- attractive appearance
- light weight
Disadvantages of Bonnell spring blocks:
- short service life
- uniform rigidity of the entire surface of the mattress
- lack of orthopedic effect
Independent spring block
The installed springs are located in an individual fabric casing and are independent of adjacent springs.
Pros and cons of independent blocks:
- orthopedic effect
- long service life
- withstands heavy loads
- has different hardness
- supports the body and spine well
Disadvantages of independent spring blocks:
- high price
- difficulties during transportation, because The mattress cannot be rolled and is heavy.
Mattresses can also be divided into 3 groups depending on the degree of hardness:
- Soft. Suitable for older people and people with lower back problems.
- Medium hardness is suitable for adults and teenagers, as well as people with problems with the thoracic spine.
- Hard ones are recommended for teenagers and people with diseases of the spine, cervical and thoracic regions.
Now let's study each type of mattress in more detail.
Dependent spring block, also known as a “Bonnel” block
Dependent springs are made from a block of springs with four to five turns, with a silhouette reminiscent of an hourglass. They are installed over the entire surface and connected to each other with a thin wire. For the production of springs, hardened high-carbon steel is used. Wire 1.2-2.2 mm thick is twisted into turns from 60 to 100 mm.
Advantages and disadvantages
The only advantage of dependent blocks is affordable price. A significant disadvantage of the Bonnell block is that after a short period of time the surface will begin to collapse inward, i.e. a “hammock effect” will occur.
Independent spring block
We have already explained above what an “independent spring block” is. Products with independent springs have 250-1200 springs on each square meter shaped like an hourglass or barrel. Each spring has up to eight turns, and the diameter of the turn does not exceed 60 mm. Each spring is in a fabric cover, which allows it to be independent from neighboring springs. The springs are made from the same steel wire as the springs for Bonnell blocks.
Thanks to independent springs, the mattress is able to withstand heavy loads, provides comfort, healthy sleep, and the spine is in the correct position.
The difference between independent springs is that they have different degrees of hardness and, depending on the required functions (preventive, therapeutic), you can choose a soft, medium-hard or hard mattress. In addition, such mattresses often have two sides, “summer” and “winter,” which are designed to provide the consumer with comfortable sleep depending on the season.
Advantages and disadvantages of spring blocks
The advantages of independent spring blocks are much greater than that of dependent spring blocks. Here we can note the orthopedic effect, increased service life, comfort, different hardness (even within the same mattress). The high cost, which can be attributed to the disadvantages of this product, is compensated by sound, healthy sleep and a fully rested spine.
Comparison of different types of mattresses
Size
Each buyer knows what size he needs based on the size of his bed. In the case where the client has a non-standard size of furniture, you can order a mattress according to custom sizes from most manufacturers.
Life time
The average lifespan of a mattress is 5-10 years. But in reality, it can last either less or more. It all depends on how it was used and on the quality of the mattress. As mentioned above, the service life of mattresses with an independent spring block is much longer than that of mattresses with a Bonnell block. In order for it to last longer, the mattress must be rotated every three months, dry cleaned regularly, and if it is necessary to remove stubborn stains, you should contact the dry cleaner. Perfect solution– use of a protective cover and mattress cover.
Weight category
If you weigh a lot, we recommend choosing a hard mattress. Most people are comfortable with medium-firm mattresses. Married couples are recommended to purchase two mattresses, separate from each other, suitable for each spouse in terms of firmness.
Coating material
If you don’t have allergies, then you can safely buy a mattress with a natural cover. However, when purchasing a mattress for newborns, you should avoid products with coconut coir, for the reason that this fiber is treated with a special composition containing formaldehyde. The concentration of the substance is small and safe for adults, but can be harmful for children. For children, it is better to purchase a mattress covered with natural linen.
Mattress with artificial turf does not cause allergies, is durable and does not require maintenance.
Anyone who experienced all the charm of old beds with a Bonnell-type dependent spring block in pioneer camps and Soviet hotels will be able to appreciate the new mattress manufacturing technologies used in the Sleepkaif company in Krasnoyarsk.
Manufacturers have not given up the opportunity to use springs as a “filler” for mattresses, but they do this using the latest technologies, using a system of independent spring blocks in production:
Improved technology for Bonnel:
And the production of mattresses without springs in general:
The choice is so varied, and the technology is so advanced, that it’s even difficult to decide which mattress is best to buy for yourself, for your child, or for your parents.
Let's give brief description both mattresses, let’s look at the reviews to better navigate the big world of new Krasnoyarsk mattresses.
Of course, some people like the feeling of gentle rocking on mattresses with spring systems more than the firm elasticity of springless mattresses. But if you need a mattress with increased, extreme rigidity, then these are only mattresses without springs!
Today, buying springless mattresses in Krasnoyarsk with increased rigidity is not a problem - there are such in production! And they are made not only for babies; there are models for one adult and for a double bed.
Such a place to sleep is recommended for people with heart disease and respiratory problems; a springless mattress is also necessary for those who are overweight.
Although the service life of a latex product is quite long (15-20 years), you won’t have to leave it as an inheritance to your grandchildren - it will dry out as the moisture evaporates from the filler.
Spring mattresses do not have this problem, but there are a couple of others.
- If moisture gets inside the springs (this can happen if, say, you use a mattress without a protective mattress cover), this will cause corrosion of the wire from which the springs are twisted. The result is creaking and gradual destruction of the structure.
- Since the structure is assembled from metal parts, static electricity may appear, which is completely unpleasant for humans. True, this drawback can be easily eliminated if you use a cover made of natural fabrics. It is in such covers (100% cotton-jacquard or knitwear) that all spring and springless mattresses in Krasnoyarsk are “dressed”.
- Spring mattresses suck in dust like vacuum cleaners, precisely due to the “pumping” of the springs. Over 10-12 years of using a mattress, a lot of dust will accumulate there, especially for “bonnel” models. Where there is dust, there is all kinds of infection.
- The infection does not settle in latex and polyurethane foam - a fact.
It is more comfortable to sleep on a spring mattress - it is softer and pleasantly springy, it all depends on the quantity and quality of the springs, but jumping on it is not recommended for either adults or children - the springs will break and deformation of the surface is guaranteed.
There is nothing to break in a latex product, but it is not springy either.
In a spring, only those springs on which pressure is applied are compressed. In springless, the entire area is used. In addition, spring models are all reinforced at the edges, but springless ones are not.
Hard coir is beneficial (without a doubt!) for a child’s spine. An excessively hard surface can be harmful to an adult if he has certain problems with the musculoskeletal system.
Before purchasing a mattress, such people should consult an orthopedist. Perhaps a mattress with a spring block would be preferable for them.
Conventionally, you can determine which mattress for whom using this table:
What definitely does not threaten buyers of Sleepkaif mattresses is allergies.
The manufacturer does not use the services of dubious manufacturers of artificial latex or polyurethane foam! Reducing the cost of goods through unscrupulous production is unworthy of a self-respecting company.
The quality of Krasnoyarsk products is confirmed by reviews from customers who have already become happy owners of spring and springless mattresses.
Spring mattress reviews:
- “We bought a mattress with independent springs. I liked the rigidity and chose a double-sided model (winter/summer). When they were choosing, my wife and I were in the “same weight category,” as they say.
- At first everything was fine, but a year later my wife gave birth and gained a lot of weight, began to complain of back pain, and our mattress became soft for her. We are going to buy a new one!
- In general, there are plans to buy two individual ones, the same as before, but my wife wants a double-sided one, so that one side is softer and the other is harder.”
Springless mattress reviews:
- “Of all the mattresses we tried, springless is the best without any doubt!
- Before this, we once rushed to buy a mattress from a cheap manufacturer, and there were big problems with coconut, and we managed to get the money back with great difficulty. Therefore, this time we decided not to save so much, although again we took risks a large amount I didn’t want to, so I chose models at a reasonable price. However, your online store fully met my expectations; we bought a very comfortable, high-quality mattress. The fact that the new mattress had practically no smell is an excellent sign that production technologies were followed. And there was no need to complain further. In terms of rigidity, this model suited me very well, one might say – ideally!”
How many people - so many opinions! To get your own experience and form your own opinion about the company’s products, all you need to do is go to the website and choose the model you like in accordance with your taste and needs. Price?! She doesn't bite in installments! And no one has canceled the discount system yet!
Springless mattresses
They do not consist of springs, but are made exclusively from filler materials. Such materials include: latex (natural, artificial), coconut coir, polyurethane foam, memory and other fillers. Thanks to this composition, there is no magnetic or electrostatic effect on the human body (from springs), the mattress has high anatomical and orthopedic effects, is silent, does not cause allergies, holds weight up to 150 kg and is long-lasting. Recommended for newborns, older children, teenagers, elderly people, as well as for people with a sore spine, poor blood circulation and other diseases of the back and neck.
We have told you the important aspects of choosing the right orthopedic mattress. Now only you must decide which mattress is best to choose to meet your requirements and capabilities, as well as which mattress brand is best to choose. But the main thing is that the mattress is of high quality and good for your health. Good luck with your choice!
To My World0
Which spring mattress is better - counting the springs
Which mattress is better to buy - rules for choosing firmness
Which mattress for a newborn should you choose?
Which is better orthopedic mattress – hard or soft?
Term of use
Body mass
- what filler is used;
- cost of the product;
- your personal preferences.
Source Sonoteka.ru
The difference between a spring mattress and a springless one
All models can be divided into main types: those with springs at the base or those created without them. Each type has its own disadvantages and undoubted advantages. The choice is made based on your preferences and characteristics, including health status.
Spring mattresses can be dependent, that is, when all the springs are connected and form a single structure. Often, in addition to them, there are special polyurethane inserts inside; they provide flexibility. Such a mattress cannot be called orthopedic due to the fact that under the weight of a person it bends freely over the entire area. You can sleep on it, but the position of the body is greatly distorted due to the fact that a peculiar hammock effect appears. It will be especially inconvenient for older people and those whose weight is significantly high. At the same time, Bonnell mattresses will not last long and are most likely suitable for sleeping places in the country or for guest bedrooms.
Independent springs in a mattress: what is it?
Independent springs in the Pocket Spring device are an optimal and convenient solution due to the fact that the springs are smaller in size and are not located in a bundle. Each of them is enclosed in its own textile case, so it “works” independently. The person’s weight is transferred to the entire surface and the “free” springs do not bend. This mattress can confidently be called orthopedic; it is suitable for obese people and those who suffer from pain in the spine and neck. You are guaranteed the longest service life, as well as absolute environmental friendliness of the models, which is very important for those who suffer from allergies.
Thus, you are guaranteed the most comfortable body position, which means a healthy and restful sleep, and for this you should choose mattresses with independent springs.
Springless mattresses, in turn, can be:
The difference between the cost of these types is significant; the choice depends, first of all, on your financial capabilities.
Which mattress is better to choose: spring or springless?
To make your choice, you need to clearly understand the significant differences between models with and without springs.
The product with independent springs is soft in feel, pleasant to lie on, and easy to change body position. In this it is superior to the springless version. Products made according to the “Bonnel” principle are quite rigid and less comfortable; they are definitely not suitable for those who suffer from spinal diseases. The degree of rigidity of springless models depends on what material is used in their production. In any case, this criterion is very individual. Remember the rule: the more weight, the harder the mattress should be.
Term of use
The general lifespan for all types is 8-12 years; the latex version can last the longest – about 15 years. Products made from polyurethane foam will deteriorate the fastest; their “life” will not exceed 8 years. When calculating, it is necessary to take into account the intensity and characteristics of operation.
Body mass
When buying a mattress for a person with a large weight (this is approximately 105-110 kg and above), give preference to springless or special options with springs with a higher density per cm². This will guarantee that the base will not collapse and elasticity will not disappear. If your weight is close to normal, then you can buy any mattresses.
It differs significantly for different products. Thus, Bonnell mattresses are considered the cheapest. Models with an independent type of springs are an order of magnitude more expensive. The most budget-friendly is polyurethane foam, the most expensive is a product made from natural latex.
Spring or springless mattress, which is better?
The choice depends primarily on your wishes. But in some cases you should follow the advice of specialists. For example, when buying a mattress for a person with spinal problems, it is best to consult an orthopedic specialist. Most likely, you need to choose an option with medium hardness. For young children whose skeleton is just forming, on the contrary, this figure should be much higher. Older people need more comfort, so they need to ensure the base is soft and flexible. Give preference to fillers made from natural materials; they are absolutely safe for humans. So, what you need to remember when choosing:
- does the mattress have sufficient orthopedic properties for you;
- does it have the required level of rigidity;
- what filler is used;
- cost of the product;
- your personal preferences.
Polyurethane foam or spring mattress: which is better?
If we consider from the point of view of cost, then the PPU option is certainly more profitable. However, the service life of such a product is significantly lower. Additionally, the advantages of such a product are elasticity and a good orthopedic effect.
However, as a minus, it can be noted that the filler is synthetic, which means it can cause allergies. It is not recommended for children. In addition, it absorbs moisture like a sponge, and cleaning and drying it is possible only in a specialized center.
Latex or spring mattress: which one to choose?
If it is possible to purchase a product made from natural latex, then the choice is obvious in favor of this option. It is quite flexible, elastic, holds its shape well and retains its color. Dust mites will not appear in it, and static electricity will not accumulate. Disadvantages include a high degree of softness and a high price.
Models made of latex of artificial origin are cheaper and at the same time they are stiffer than springs. But at the same time, their service life is significantly shorter. They perfectly adapt to the characteristics of the human body and retain their shape.
- If we are talking about saving money, then you need to pay attention to Bonnell mattresses or products made from artificial latex. The remaining options - with independent springs or with natural latex - are much more expensive;
- a latex mattress is guaranteed to be hygienic, does not allow water to pass through, takes into account the anatomical features of the body, provides an orthopedic effect, and will not collapse or rot;
- unlike spring products, latex will not lose its shape and will hold any weight;
- mattresses without springs are an ideal solution for a child. In turn, a spring mattress is suitable for those who value pliability, softness, and springiness.
Thus, from the wide variety of options, spring and springless models, you can choose something that suits you in all respects. Enjoy comfortable and healthy sleep on quality and comfortable mattress.
Source Sonoteka.ru
There is an alternative - a mattress without springs
If you compare spring mattresses and springless ones, then in general it’s difficult to say which is better. Market indicators, which account for 95% of sales, still indicate the popularity of spring ones. Yes, the purpose of the first and second is the same, and a springless mattress can be called an alternative to a spring one, but the design, and therefore the effect, are different.
Springless mattresses are distinguished by types of construction such as monoblock and multilayer. The former consist of one material, while the latter combine several layers. They differ in the level of rigidity, which determines the orthopedic effect and comfort. To figure out which one is better, you need to “look” inside. We are interested in the filler.
Choosing a springless mattress filler
The filling will determine the firmness level. It is not so important here whether the material used is natural or synthetic. The main thing is that sleeping on it is comfortable and useful. So, what material to choose if you need a mattress:
- Hard. The leader in hardness among fillers is coconut coir. The mattress can consist entirely of it - it is monolithic, it will be the hardest. Multilayer ones may have several layers of coir and synthetic layers. Over the years, this material will maintain a smooth surface and the correct position for the back. A more expensive option is seaweed or cactus coir.
- Medium hardness. This option suits most people and is considered a classic. To achieve the effect of optimal hardness, coconut and latex are combined. In expensive options, natural latex is used, in more economical ones, artificial latex is used.
- Soft. The ideal option in this case is memorix or memory. This is a synthetic product that has the highest anatomical effect. The filler will softly and instantly take the shape of the body. It also has a memory effect, that is, it retains the contours for some time. To buy a more affordable, but equally soft mattress, you need to choose a multi-layer one with the inclusion of cheaper layers.
If you want to purchase a mattress with the greatest orthopedic effect, it is better to consult an osteopath. The specialist will tell you the individual degree of hardness. In practical applications, monolithic and multilayer mattresses compete in little. They are practically in the same price category; their cost will depend on the materials. But multilayer ones have a wider range of rigidity.
Springless mattresses - pros and cons
There are many advantages to such mattresses. Firstly, they are more useful than spring ones due to their orthopedic effect. Thus, a person, together with a mattress, receives prevention against insomnia, back pain and curvature. Secondly, they are more compact and easier to care for, and due to the absence of metal parts, nothing creaks and the effect of waves is not created. As for the service life of springless mattresses, it directly depends on the quality of the product. Expensive mattresses made from high-quality materials, made with all the necessary technologies, can last for several decades, while cheap ones can develop strong dents after the first year of use.
There is a greater choice in terms of comfort and rigidity, so everyone can choose for themselves. suitable option. The only drawback may seem to be the high cost of the products.
Rating of mattresses with independent springs 2017: only the best for you
In order to finally figure out which orthopedic mattress is better, spring or springless, we have specially compiled an impromptu rating that will clarify not only some of the nuances, but also present the opinion of ordinary people, as well as experts, since it was formed precisely thanks to sociological research.
1. Planear model from the domestic company Atmosphera
The factory producing these mattresses has been operating on the domestic market since 1992. Over all this time, it has secured a consistently high reputation for itself and has also earned the trust of users. This model is the most popular, it has medium hardness, as well as an environmentally friendly composition of components, for example, horsehair, sisal, latex and so on.
Such mattresses are made using a combination of unique hand assembled, as well as innovative automated lines. It is equipped with a removable cover that is easy and simple to wash, and it is produced depending on the weight of the consumer. The warranty can range from three to ten years, and the only drawback is the high cost.
The price of the Atmosphere Planear mattress on the manufacturer’s website ranges from 17-20 thousand rubles.
2. Belarusian mattress Vegas 20 euroLATEX Oeko-Tex ISO
Another popular manufacturer of mattresses with independent spring blocks, the Belarusian company with the amusing name “Vegas,” has also found its niche in the market by releasing many excellent models, including Vegas 20. All products of this company are made exclusively from pure and safe materials, they have all the declared orthopedic properties, and have also been certified for all possible indicators. Moreover, components for mattresses are brought from Lithuania and Belgium, the Netherlands, Germany, and so on.
The factory provides mattresses for this model guarantee period operation for only three years, but in fact they last much longer. Moreover, without losing its unique qualities and properties at all. True, the cost of such a mattress, depending on the size, can be quite high, which many consider its main drawback.
The cost of the Vegas 20 euroLATEX Oeko-Tex ISO model starts at 19 thousand rubles.
3. Excellent domestic mattress Optima Mix EVS500 from the Ormatek company
In fact, the production of the Ormatek company has been providing the country with high-quality and in-demand products for more than fifteen years, and this model is far from an exception. It is not by chance that this model was included in our rating of mattresses with independent springs, since it already has a more affordable price, and the quality is consistently high.
All mattresses in this collection have anti-allergenic properties, are equipped with unique SmartSpring spring blocks, and have up to fifteen hardness zones. In addition, such mattresses have a warranty period of two to seven years.
The price of the Ormatek Optima Mix EVS500 mattress is 11-12 thousand rubles.
Rating of springless mattresses of various levels of hardness
If you are seriously thinking about which mattress is better, spring or latex, you should also consider springless models, which are confidently gaining popularity in the market today, due to their truly outstanding qualities and properties. They are much cheaper, and their service life is longer than models with springs.
1. Domestic soft Compact Effect Low mattress from Askona
This model is truly unique in its own way, as it has a special version of orthopedic support, a system called MULTIZONE, which is a monolithic layer of latex that has different levels density. This ensures ideal support for the spine during night sleep or daytime rest.
This mattress is quite durable, it is easy to clean and wash, as it has a unique Buona coating that perfectly protects the surface from abrasion. However, the maximum load for such a mattress is small, only ninety kilograms, so for more obese people you will have to look for something else.
average cost Askona Compact Effect Low mattress costs 4.2-4.5 thousand rubles.
2. Springless mattress of medium hardness "Eco-Flex" from the company "Ormatek"
This mattress is quite comfortable and practical, and it is also quite affordable for almost all categories of buyers. In production this model made from a single piece of innovative polyurethane foam, which provides high-quality support for the body, protection from dust mites, as well as from harmful products of their vital activity. The quilted synthetic jacquard cover is easy to wash and is quite durable.
Such models are delivered rolled up, and the maximum weight of a person who is recommended to sleep on it should also not exceed nine tens of kilograms. However, there are some drawbacks, and at first you will notice a rather pungent, characteristic odor, which will fade over time. It is optimal to start using it a week after purchase, not earlier.
The price of “Ormatek Eco-Flex” of the “Eco” series ranges from 3.5 to 4 thousand rubles.
3. Rigid orthopedic springless Toris MagicSleep Kontrast from the Fusion series
This unique mattress ended up in third place in our impromptu rating only because it has a fairly high cost, but this is not by chance. The thing is that it uses new ErgoFoam technology, which is a monolithic block of latex coconut fiber, as well as a seven-zone design with different levels of material density. The orthopedic qualities of this model are truly excellent, and they do not deteriorate at all over the years.
All mattresses leave the factory in vacuum packaging, with the exception of the size two by two meters, but you should know that storing them in a rolled form is only permissible for three months. This mattress can withstand a load of up to one hundred and thirty kilograms, which is already significantly more than in previous versions.
The cost of such a Toris MagicSleep Kontrast Fusion mattress is from 7 to 9 thousand rubles.
Classic models: spring or springless mattress, which is better?
It is worth saying that traditional mattresses, equipped with spring blocks that are familiar to us, which can be dependent or independent, have been produced for more than one hundred and twenty, or even one hundred and fifty years.
- The most common and cheapest type is dependent springs, in which they are all woven into a single structure. On top there may be a gasket made of various materials, as well as a cover. Such mattresses soon sag, begin to creak, holes form on them and it becomes impossible to sleep. But the price allows you to buy a new one without special costs.
- The second option is an independent spring block, when each spring is packed in a bag specially made for it. Such mattresses are of much higher quality, they almost never creak and there will be no dents or potholes on their surface. This type of mattress is often orthopedic.
- Springless mattresses do not have a rigid structure, but consist of a filler and a cover. For example, it could be ordinary polyurethane or foam rubber, or maybe horsehair, coconut coir, latex, and even buckwheat husk.
Reviews will help you figure out which mattress is better, spring or springless, as many have shared their own opinions. Therefore, it is worth separately discussing the advantages and disadvantages of mattresses on the market, so as not to make a mistake when choosing.
Advantages and disadvantages: which mattress is better, spring or polyurethane foam?
When thinking about which mattress to choose, spring or springless, you should definitely evaluate all their unique advantages and disadvantages, so that you don’t regret your choice later. Moreover, there are not so few such nuances, so you need to devote enough time to this, however, they are all obvious, so you are unlikely to get confused.
- In spring versions of mattresses, a huge amount of dust and other debris always accumulates, which can adversely affect our health, and where there is garbage, waste and dust, dust mites are sure to appear. These insects simply cannot live in coconut fibers, polyurethane or latex.
- High-quality springless models dry out well due to their special porous structure, and moisture inside a regular spring mattress can lead to corrosion of metal springs.
- All spring models are equipped metal parts that collect static electricity, which, to put it mildly, is not useful for the human body.
- Spring dependent mattresses involve people rolling towards the center or edge of the bed, while with independent blocks they are of better quality in this regard. Springless ones better support the body, bending just where it is needed, no more.
Thus, the choice of which mattress is better, with or without springs, is quite transparent. All spring options have their own disadvantages, but their cost is much lower. Mattresses with independent spring blocks are much better, they are of higher quality and are able to ensure the absence of the “hammock effect”, and mattresses without springs generally have an enviable orthopedic effect. However, the cost of the latter can be prohibitive, but health is the most important thing, right?
We simplify the choice of mattress: spring or springless
When choosing a mattress, you should evaluate not only its unique advantages, but also ensure that the disadvantages do not turn out to be critical, this is a fact. In addition, it is definitely worth considering simple tips professionals who know exactly which models are best to avoid, so as not to regret later wasted funds.
- You shouldn’t waste your time on small things and buy mattresses from manufacturers that no one has ever heard of, anywhere. Even if they were described to you as the most advanced, just look for the names on the Internet. If they are not there, it is better to bypass such a model.
- Make sure that orthopedic mattresses are equipped with an inspection zipper, which will allow you to protect yourself from counterfeiting. Unscrupulous manufacturers often change more expensive materials, declared as a filler, to cheaper ones.
- If you hear a persistent chemical odor from the mattress, you should once again inquire about its quality. Make sure that the mattress has all the certificates of conformity, otherwise your sleep may turn into a cruel nightmare.
One more piece of good advice, as they say, “for starters”: never be fooled by cheapness, like the notorious priest from the old fairy tale. If you are offered a model from a well-known company at a bargain price, you should think about where such a discount could come from. By definition, a quality item cannot cost a pittance, since high-quality materials and new technologies are quite expensive for the manufacturer.
To extend the life of the mattress, you need to follow the rules: Do not bend or fold under any circumstances (only some springless models are allowed to be folded). The mattress must not be smaller than the sleeping area. This will cause deformation. Jumping on the bed is not allowed. Especially with springs. This will lead to rapid deformation. Do not use aggressive substances for cleaning. Ideally, a vacuum cleaner is used for this. It is also possible to use a soap solution. You should air dry it, do not use an iron. It is advisable to use a removable cover. It can always be removed and washed. At the same time, the mattress itself will be in perfect condition for a long time. If you use a cotton cover, this will allow the sheet to “not slip” on the surface of the product. The mattress should be turned over at least once every six months. This will allow the product to restore its elasticity and protect it from deformation.
This will help increase the service life of the mattress and will allow you to maintain its properties and ideal appearance for a long time.
Choosing a mattress is a serious matter. It depends on how well a person sleeps and how he will feel the whole next day. If the buyer understands all the nuances and purchases a model that suits him perfectly, then the mattress will delight him for many years. This means he is guaranteed healthy sleep.