Do-it-yourself renovation of an old kitchen. How to update an old kitchen set

Experts believe that an apartment needs updating at least once every five years. You can do it more often, it doesn’t cost less. The kitchen is the heart of the apartment; here, according to belief, it is concentrated Vital energy Houses. It is important that everything here is in order, shiny and sparkling. Then the welfare of the owners is guaranteed. Believe it or not, everyone decides for themselves, but the kitchen needs updating more often than any other room.

Making a plan

An action plan is needed. You must clearly understand what result you want to get and what is needed for this. The plan will help avoid unnecessary costs of money, time and labor on your part.

It can take anywhere from a few hours to a few days to create a plan for your kitchen renovation. The more detailed it is developed, the easier the process of creating a new interior will be. Take your time, approach this issue responsibly.

If you have come to the conclusion that the kitchen needs changes, then there is something that doesn’t suit you. It is important to understand exactly what it is. Take a piece of paper, a pencil, stand in the middle, look around and write down. For clarity, format the entry in a table, then conclusions and a shopping list will be generated automatically. An example of what the table might look like is shown below. Naturally, you can add your own graphs and modify them as you see fit.

It is important to provide for all the little details immediately at the planning stage, then the result will exceed expectations.

Renovate your kitchen no less responsibly than renovate it

Furniture

Furniture is the first thing that catches your eye. Dilapidated, shabby, incorrectly matched general interior, with broken fittings it makes a depressing impression. What to do? Buying new tables, chairs, cabinets is expensive. But updating your kitchen with your own hands is very easy, just read the article to the end and use your imagination.

Dinner table

We determine what material the table is made of: solid wood, chipboard, MDF, glass. Based on this, we choose the update method.

General recommendation: loose parts need to be strengthened. Disassemble the table, check the accessories for serviceability, replace where necessary. WITH special attention treat sliding mechanism. All cracks where water can get in must be treated.

Solid wood

Solid wood is the easiest to work with. The material is not capricious, durable, and easy to restore. It is enough to remove the top damaged layer of wood and paint it as you see fit: paint in the desired color, varnish, also in Lately A popular type of arts and crafts is decoupage. An interesting “tablecloth” effect is achieved by painting the surface through the tulle. For all painting methods, the algorithm of actions is the same.

1. Lay newspapers on the floor or plastic film. Walls and other furniture should also be covered to prevent stains.
2. Wipe the entire surface of the table thoroughly with a damp cloth and let dry.
3. Filming old layer varnish or paint, sand it. It is best to carry out the procedure grinder, to which it is possible to attach a garbage collection bag.
4. We cover the joints, uneven areas, and cracks with putty and let them dry.
5. Varnish (paint) must be applied to the table in a clean room, otherwise dust particles will stick, creating unevenness.
6. After applying the first layer of varnish and allowing it to dry completely, the surface is sanded again with fine-grained sandpaper. This can be done manually.
7. Next, apply as many layers of stain as necessary to achieve the desired shade of wood. With each layer, the table surface will become darker and the color more saturated.

It is not advisable to glue a self-adhesive film onto the surface of a table made of solid wood - the pattern created by nature is perfect.

Remember that furniture in the kitchen is more often than any other subject to mechanical stress and comes into contact with water. Be sure to treat the countertop with a water-repellent wood compound. It is preferable to cover a table made of solid wood with a tablecloth or napkins during use. Any careless use of cutlery can lead to damage to the surface, dents, and scratches. Water that gets onto a damaged table surface will cause the wood to swell and damage the appearance of the furniture.

Chipboard, MDF, glass

Furniture from laminated chipboard, MDF is an order of magnitude cheaper than solid wood furniture. Restoring is more difficult: the price of consumables may be higher than the cost of the product itself.

The countertop cannot be restored. Water entering the crack will inevitably cause the chips to swell, and unsightly bumps will appear on the surface. Cover the damaged area with silicone or rub with regular wax candle, let dry. Such measures will prevent water from entering. The defect itself can be hidden with the help of a beautiful tablecloth, suitable for the overall interior, combined with textiles already present in the kitchen.

Tabletop defects are also hidden by covering the surface with self-adhesive film and upholstering it with artificial leather. It is not practical to cover with ceramic decorative (mosaic) tiles. Expensive. During daily use, crumbs and food debris will clog between the seams.

If there is a folding mechanism, check it for serviceability of the fittings. Replace and lubricate damaged parts with machine oil.

Old dining table from chipboard modern look will give new metal legs purchased in a store furniture fittings.

Cannot be restored. It makes sense to remove the damaged, scratched tabletop and buy a new one made of glass or chipboard.

Kitchen cabinets

The first thing to do is update . The algorithm of actions is the same as in the case of the table. We figure out what material the cabinet doors are made of, and based on this, we develop an action plan.

The kitchen will become harmonious if all the furniture is decorated in the same style, similar. The table and chairs should complement the set. For example, when decorating a table using decoupage technique, take care of the same facades.

A simpler but more expensive option is complete replacement facades to new ones. Remove the facades from their hinges and measure them. Find out where the nearest furniture production is located, place an order of the required size, configuration and color. Choose handles that match your style.

Self-adhesive film will come to the rescue if you are racking your brains about how to make your kitchen better, and you don’t want to run out of money.

The appearance of the furniture is important. However, the internal component is no less important when updating your kitchen yourself. The comfort of cooking depends on how well the cabinets are arranged, how well they are made, and how high-quality fittings are installed.

Inconvenient. Remove dishes or food from the far corner difficult task: pulling out everything that blocks the desired item, and then putting it back - it will take a lot of time and effort. Make life easier - re-equip the internal equipment of the cabinets, make them retractable. Buy high-quality guides with closers.

Closers will save you from popping noises and household injuries. The move will become smooth and silent. Cooking using such furniture is a pleasure.

Make a table, then the scope of work and the shopping list will become clearer.

Tabletop

The countertop plays a huge role in the appearance of the kitchen. If cracks, chips, scratches, or swelling appear, it must be replaced, otherwise the update will be incomplete. It is inconvenient to cook on a damaged countertop; food gets stuck in damaged areas, which leads to unsanitary conditions. Making a replacement is not as difficult as it seems at first glance.

1. Measure the old countertop.
2. By calling furniture production in the city, choose where you can buy a countertop cheapest.
3. New working surface should fit perfectly into the existing interior; think in advance what color it will be.
4. Dismantle the old one, first turning off the gas and water supplies.
5. If before the renovation the kitchen was ordinary Appliances, then now, taking advantage of the moment, purchase a built-in one.
6. Cut out electric jigsaw holes for sink and hob.
7. Treat the cuts with silicone. Under no circumstances should water get in here. Otherwise, in a year you will have to start replacing again.
8. Install and secure the tabletop to the frames of the lower modules.
9. Secure the metal strips at the ends.
10. Install the equipment.

There is an article on the site with more detailed instructions How to install a countertop with your own hands.

Chairs

It is better to update the chairs and table at the same time. This way you won’t have to clean up twice after carrying out dirty work, or select an exact match of the color shade.

1. Sand the frame. You will need both coarse sandpaper at the beginning of work and fine sandpaper to make the surface smoother.
2. We prime cracks and potholes and let the primer dry.
3. We coat it with varnish for painting, after the paint itself has dried. Any colour.
4. Artists and creative personalities can apply a drawing or ornament.

When removing an old layer of paint or varnish, be sure to wear a respirator and goggles. The particles are so small that they will get into your lungs and eyes!

We reupholster the worn, stained seat with new fabric.

1. Remove the old fabric.
2. We change the foam. Cut according to the existing template.
3. We cut the fabric with a margin of 10 cm around the entire perimeter.
4. We put foam rubber on the base, cover it with fabric on top, fold it under the bottom, stretch it, and fix it with a furniture stapler or special nails.
5. We fix the seat onto the frame that has dried after painting.

If you don’t want to do paint and varnish work, you can tie the chair with twine. To do this, we tightly wrap the back and seat around the surface with twine, which we immediately fix with glue.

Walls

When telling how to update a kitchen, you can't help but talk about the walls. Most often their lower part gets dirty. This situation is especially familiar to families with small children and pets. Children's fingerprints, traces of the process of learning to use a spoon, scratches - all this greatly spoils appearance. To improve the situation, it is not at all necessary to re-paste the wallpaper in the entire kitchen. It is enough to replace the damaged part.

1. Move furniture away from the wall.
2. Remove the baseboards.
3. Using a level and ruler, draw a straight horizontal line with a pencil.
4. Draw along the line with a sharp stationery knife, separating the clean and damaged part of the wall.
5. Wet the rag warm water, treat the area to be replaced so that the old wallpaper comes off.
6. Fill any uneven walls.
7. Treat with primer.
8. Paste new wallpaper that matches the color and pattern. It is not at all necessary that the old and new parts completely coincide. The interior will become more interesting, more original if they become a little different.

If the wall in the kitchen is painted, then the damaged part can simply be repainted.

Floor

Updating the kitchen floor depends on the coating that is currently present. If it is tile, laminate or parquet, it is enough to remove the damaged part and replace it with a new one. Linoleum or carpet covering you will have to either change it completely or wash it very well.

Linoleum cannot be washed with abrasives. detergents, rub with powders, soda. This will lead to loss of brightness and scratches. Light stains can be washed off with a warm soapy solution. More durable greasy spots treat with a solution of water and white spirit.

Textile

How to update the kitchen if the furniture is in order, the floor and walls are like new, but you still want something new? Change textiles! The kitchen will change without much effort on your part.

For each season you can create your own interior. For winter, choose textiles in pastel blue tones, for summer - green, autumn - yellow-orange. Textiles will also help create the mood for the New Year, birthday, and the eighth of March.

Textiles play an important role in the kitchen, but for proper use you need to know the rules:

1. Do not overdo it. The kitchen should not look like grandma's chest, filled to the brim with rags. Know your limits. Napkins under every cup, plate, on windowsills, radiators - this is unnecessary.
2. There is only one leading color in the kitchen - this is, most often, the color of the facades kitchen furniture. Textiles should highlight the furniture favorably; the color should not match. You are taking .
3. Curtains, chair seats, towels, potholders, tablecloths - should not be the same color and texture, otherwise you will get a tasteless, uninteresting kitchen.

It is also important to follow safety precautions.

1. If the stove is located close to a window, do not hang long curtains. A gust of wind can throw curtains onto a working hob.
2. Potholders and towels should not be stored near stoves or heating electrical appliances.

Purity

Purity - the most important condition beautiful and cozy kitchen. How to update your kitchen? Perhaps it just needs to be washed thoroughly... Dirty furniture fronts, stained windows, an untidy stove, stained towels - all this creates a feeling of discomfort. Three hours of thorough cleaning will replace a month of repairs. A small but clean kitchen with inexpensive furnishings will be no worse than a huge apartment with Italian furniture.

Clean up your closets, throw out unnecessary things, wash, wash and starch the tablecloth - you will notice that it has become easier and freer to breathe.

So, let's update the kitchen! This room is one of the most used in any apartment or house. We are sure that there are also a couple of things in your kitchen that could be improved or refreshed.

1. How to update your kitchen: replace the doors

Hang on kitchen cabinets new doors are an economical alternative to completely replacing furniture. The appearance of the kitchen will change beyond recognition if you change their color or texture. However, there is important point, especially for “older” kitchens: when hanging new doors, you often have to change the fasteners, and this can weaken the kitchen structure, lead to sagging and shorten the life of the entire set.

2. Paint the facades

This method will help achieve the same strong effect as when replacing doors, and there are fewer risks. Arm yourself with your favorite paint and update your old doors. A spray can will do a better job than a brush: there will be fewer streaks and it will be easier to achieve uniform coverage. If you want to use liquid paint remaining from the last repair, it is better to apply it with a sponge using blotting movements. And don't forget to apply a couple of coats of varnish on top.

3. Install new handles

It's amazing what a role such a small detail as a handle plays in the perception of the entire kitchen. Moreover, replacing them is simple and inexpensive. If you are repainting cabinets at the same time, you can seal and paint the old handle holes, then the choice of new parts will not be limited in any way. If you are only changing pens, you will have to find a similar format.

4. Cheat with the countertop

If the surface of your countertop has completely deteriorated or is simply annoying you, you can replace it. However, if it is glued to the cabinets, it may be difficult for you to later disguise the signs of destruction from dismantling. There is a simpler option and, if we are talking about a countertop made of natural materials, cheaper: invite a specialist to your home who will install it on top of your countertop thin layer wood veneer or stone.

5. Upgrade the light

Buying new lamps or at least changing the lampshade pendant lamp will give a charge of novelty. Think about original pendants, they look more elegant than just a dangling cord.

If your kitchen only has one general light source, you are guaranteed to add comfort and improve the atmosphere in the room by hanging a lamp above the work surface and a couple of sconces in the table area. If you don't want to invite an electrician to mount the lights into the wall, those that simply plug into an outlet are also suitable.

6. Switch to energy-saving lighting

It’s not for nothing that they say so much - they are more expensive than other light bulbs (although the price decreases over time), but at the same time they work for a very long time, are extremely energy efficient and you can’t get burned on them. Changing your light bulbs is probably the simplest change you can make to your kitchen, but brighter light will benefit the look and feel of your space, and the energy savings will benefit your budget. LEDs are sold with a wide variety of socket types, so the built-in halogens can be easily replaced.

7. Paint the ceiling

Paint or re-whiten the ceiling. Even if this is the only thing you do to update your kitchen, you will be surprised how much lighter and brighter it will be. Kitchen ceilings take a lot of stress from steam, smoke, dust and grease splatter, and you may not notice it until you compare before and after.

8. Update the kitchen apron

If the wall covering behind the kitchen countertop is outdated or, moreover, was not initially adapted to everyday kitchen life, the time has come to make a beautiful and practical kitchen apron. A lot of interesting ideas found in our articles:

• Rating of materials for kitchen apron: all the advantages and disadvantages

Fast and inexpensive solution: buy back or, if you're lucky, pick up the leftovers for free different tiles in warehouses or from friends who have recently completed renovations. Match tiles different sizes, colors and textures to get a unique and vibrant backsplash that will become a real highlight of your kitchen. If you want a mosaic apron, then broken tiles. By the way, if the condition old tiles still normal, it can also be simply spray painted and varnished.

9. Change the floor covering

Are your floors in need of updating? This problem can be solved on a budget by working yourself and choosing coatings that feel good when laid on top of the old floor (if it is not too crooked). Vinyl tile, cork, laminate or linoleum are easy enough to install that you can do it yourself with a little diligence.

10. Get rid of clutter

No matter what changes you make to your kitchen, clutter and excessive visual “garbage” can ruin everything. Perhaps not all the accessories on your kitchen shelves and magnets on your refrigerator are so dear to you. In the vacated space, you can put several new, carefully selected items: vases or bowls, vintage bottles or memorable photographs. Or just leave more free space.

Photos: apartmenttherapy.com, einteriors.design, pinterest.com, lifeschic.com, styleathome.com, nicolefranzen.com

If the owners don't like it kitchen set in your apartment or has it become dilapidated for one reason or another, then it’s time to think about how to update your kitchen set? It is not always necessary to purchase new pieces of furniture; you can easily update a set with your own hands.

The kitchen is the place where we spend a large number of time. Here not only food is prepared, but guests are received.

Therefore, a modern kitchen should not only be multifunctional and comfortable, but also attractive. You can achieve comfort with the help of a beautiful kitchen set.

If it is not possible to carry out repairs in a timely manner, then you can resort to more budget-friendly options for updating furniture.

Modern furniture decoration options

Photo	Description
	Option 1. Painting All work is done using chalk paint. Paint will change the appearance of furniture beyond recognition. Thanks to the diversity color ranges and shades can effectively change the furniture. In order for the paint to adhere as firmly as possible, it is necessary to first coat the façade of the unit with a primer. Experts advise using moisture-resistant varnish as a fixing (surface) layer. The varnish is applied after the paint material has completely dried - no earlier than 24 hours.
	Option 2. Self-adhesive film This is an incredibly budget-friendly and attractive option to update your kitchen set yourself. This update may be a temporary update. The film is easy to stick, in addition, it is easily removed from the surface and does not leave marks or damage. The approximate service life of the film is three years. The best option for a kitchen set for such an update is solid facades that do not have corrugated parts. How to cover a kitchen set with self-adhesive film? Difficulties arise mainly when the gluing process occurs. Do not allow bubbles to form.
	Option 3. Decoupage An old kitchen set will get a presentable appearance thanks to the well-known decoupage technique. In this way, you can easily hide defects, scratches, chips and other irregularities on the surface of the headset. You can use a wide variety of shades and thematic designs.
	Option 4. Moldings Interesting and sufficient modern version updating the appearance of the kitchen set - moldings. You can purchase ready-made plastic or wooden planks. In addition, you can update your kitchen set with homemade slats. I note that you need to cut the required length at an angle of 45°.
	Option 5. Decorative elements You can make the inserts yourself from scrap materials, or you can use ready-made varieties. For example, elements of rattan fabric look attractive.

To update the façade of a kitchen unit, it is recommended to use chalk (mineral) paint. Firstly, it has a thicker consistency and high adhesive properties. For this reason, it easily penetrates into layers of any material. Secondly, on modern market There is a huge variety of colors and shades.

Restoring a kitchen set with your own hands is possible with the help of a redesign. Redesign is a process of change old furniture with new facades.

With modular kitchens it is easier to accomplish this task, since finding a suitable new façade will not be difficult. Exclusive kitchen sets will have to be replaced by other methods.

Stages of furniture renovation work

To update your kitchen set, you can use any of the five proposed options. Each of them has certain subtleties and nuances. My instructions will allow you to easily carry out all the necessary manipulations.

Before starting renovation work, it is important to understand how to remove a kitchen unit? Different variants decor means various ways Removing the kitchen unit:

• Removing cabinets. It is most often used when modeling furniture using decorative strips, decoupage or when covering facades with film.
• Removing the doors. It is used when painting furniture, as well as when decorating with moldings and decorative inserts.

Painting the façade

How to repaint a kitchen set with your own hands:

1. First remove all handles and fittings.
2. Use sandpaper to remove old material. At the same stage, the working surface is degreased. You can use alcohol.
3. Primer. Facades can be coated in two or three layers. Each layer must dry thoroughly.
4. Next, paint is applied. It is recommended to apply the paint in two or three layers. After the outermost layer has dried, the surface is varnished.
5. Finally, old or new fittings and door handles are installed.

Self-adhesive film

It is important to use sharp scissors and a ruler. The facade covered with self-adhesive film is durable and durable:

1. On initial stage All fittings and furniture handles are removed from the working surface.
2. Measurements are taken and the film is cut.
3. It is good if the entire working surface is first degreased using an alcohol solution.
4. When gluing the film, please note that it is necessary to create a free sheet. It ranges from 3 to 5 cm, and is intended to go around the edge of the door and facade.
5. The corner part of the film is cut at an angle of 45° and folded over each other. Thus, you get a beautifully decorated corner.

Decoupage

A prerequisite for decorating using the decoupage technique is degreasing the surface. You can use a specialized degreaser or alcohol:

1. The second layer is removed from the prepared napkins. If necessary, you can cut out the desired design.
2. Lubricate the drawing and the working surface with PVA glue.
3. The façade is coated with protective varnish.

Conclusion

Today, decorating a kitchen set with your own hands is quite common, but there are not many reasons for this:

1. First of all, it's great a budget option updating the usual appearance of the kitchen.
2. Secondly, such methods are low cost.
3. Thirdly, you get an excellent opportunity to independently realize your creative potential.

It is also noteworthy to note that the facades of the kitchen set are capable of performing not only decorative, but also protective functions. For example, self-adhesive film has a moisture-resistant effect, and plastic strips, which can decorate visible defects formed during the operation of the kitchen set.

Watch the video in this article, and if you have questions, leave them in the comments and we’ll discuss them!

Change appearance Kitchens can be done in many ways: repaint the walls or decorate them with photo wallpaper, install blinds instead of the usual curtains, use a different lighting scheme, and so on. But of all the possibilities, it is the update that is the most desirable option and, as many believe, the most difficult and costly.

Actually this is not true.

Basic Kitchen Renovation Techniques

In fact, the work that can be resorted to House master, are determined by 2 main factors: the material of the set and the intended style of furniture. Moreover, the first question is of fundamental importance, only in what form: wood or all other materials. The second one decides which design techniques are acceptable and which are not.

To the most available methods transformations include:

• painting is an operation that is not possible only with acrylic sheet coating;
• fastening the molding is not suitable only for the same option, and is also impossible with;
• pasting with film - has no restrictions;
• aging is an option for;
• decoupage - not suitable only for acrylic coating;
• Well, the most radical way is possible in any case.

Classic cuisine

It is worth including here both the classic interior and the palace interior, since in such functional room the difference will be small. How to update kitchen facades in a classic manner?

The easiest thing to redo, of course, is smooth facades. Not as many problems as it seems are caused by radius ones, since cabinetmakers have been using curved facades for quite a long time. But difficulties may arise with finishing if we are talking about sheet plastic - HPL and acrylic. In fact, nothing can be done here other than pasting it under wood.

In all other cases, do the same.

Select the appropriate furniture molding - this product has many types and sizes. For classic interior A simpler, elegant molding is preferable; for palace styles, you can choose an option with a complex configuration, with gilding. Even overhead carved parts can be used.

1. The façade to be renewed is removed from its hinges and the fittings are removed. All old finishing layers must also be removed. The enamel and varnish are removed with a solvent, the PVC film is heated strongly, and so on. If necessary, clean the surface of the sash with sandpaper.
2. The molding is cut to size, the corners are filed at 45 degrees. Then the fragments are fixed to the surface with ordinary wood glue.
   After drying, the renewed sash is primed. You can use a brush or spray gun.
3. After drying for about 1 hour, the product is painted. If, in addition to the molding, carved elements are also attached, it is better to paint them with a brush; it is recommended to repeat the painting.
4. Then the fittings are fixed to the façade- old or new, and install the sash in its place.

Despite the fact that wood is considered a traditional material, single-color facades with moldings are quite suitable for a classic interior. And for palace style light shades– salmon, pastel pink, champagne color are even more suitable than imitation wood.

Country cuisine

Updating facades, Provence or English will require the use of other methods. The main differences between the rustic style are apparent simplicity, but combined with smoother outlines characteristic of antique products. The strict geometry of flat facades is not suitable here.

Another feature is the antique effect. It is created mainly through the use of special paints. In addition, when remodeling, you can combine several colors to create the effect of old furniture repainted several times.

How to update a kitchen set with your own hands for the interior in rustic style? The following methods will work.

For wooden kitchen fronts and doors made of wood material Coloring is ideal, but specific. To do this, the facade is removed, the fittings are dismantled, the old finish is cleaned, and the product is necessarily degreased - the product is used depending on what kind of paint the product is going to be coated with.

Requires several shades of paint. You can get by with 2, but still, more often they use 3, even bright ones.

1. For example, first paint the surface with a white base paint, then, without waiting for complete drying, apply a layer of blue.
2. Use a dry sponge to wipe off some of the paint so that the white shows through the blue layer.
3. On next stage apply a third layer - for example, green, and also partially wipe it off, without waiting for the paint to set.
4. The appearance of a DIY kitchen takes on the effect of antiquity, as if the set had been painted several times and served in the home for decades.

Updates can be achieved in another way, but, however, this method is only suitable for natural wood. In this case, the façade, cleared of varnish or paint, is treated with a stiff metal brush to obtain scratches and grooves. Then blowtorch cauterize the surface so that the edges of the grooves are charred. The soot is not removed, but, on the contrary, rubbed into the wood with a soft brush and varnished along with it.

This set looks really old and authentic.

Retro kitchen

Renew so as to look old - fashion trend and is implemented in the most different styles. Moreover, such a remodel actually takes less effort and money than trying to give the kitchen a new look.

For the retro style, the ideal method, and suitable for absolutely any furniture, is decoupage - a technique for attaching patterns to the surface of the door. You can use any options as a drawing: images on special napkins for decoupage, drawings from a magazine or album, book illustrations, photographs – black and white photographs and newspaper clippings are especially effective. Pieces of fabric, lace, leather, leatherette, dried flowers and herbs, spikelets, grains, flat beads and rhinestones, and so on are used.

Decoupage is done very simply.

1. First, prepare the surface: the material without the old finish is sanded, varnished, polished plastic surfaces degreased.
2. Cut out a drawing - from a napkin, from a newspaper, from a photo, generously coat it with glue - the material should be saturated.
3. Carefully apply the drawing: to the entire surface of the facade (in this case, the fittings are first dismantled) and to the inside of the paneled sash, only to a certain area. Smooth the image with a brush to remove any air bubbles.
4. After the glue has dried, the sash is opened with varnish. The procedure is repeated three more times after the previous layer of varnish has dried.

Modern style kitchen

I can’t show you how to update your kitchen units with your own hands in a photo, but they do allow you to see the result. Sometimes such updates look so amazing that they seem to be the result of the efforts of professionals. In fact, the secret lies in modern materials.

Vinyl decorative stickers are the simplest, most affordable, and perhaps the most effective method of turning any kitchen into something completely new. It is often used for this purpose (a layer of glue is already applied to its back surface). The design is very different: monochrome, with images, patterned, imitation of natural textures and even 3D images - there are a lot of options.

To give your headset a unique look, do this.

1. Remove the sashes and remove the fittings. An additional advantage of this decoration method is that facades can be of any shape and size.
2. The film is cut to the size of the facades. You should not do this without preliminary measurements, even if the dimensions of the headset are quite standard: during use, the dimensions have changed at least a little. When cutting, you need to take into account the coincidence of the boundaries of the images and the motifs of the ornament.
3. The surface of the furniture is thoroughly wiped and degreased.
4. Peel off 2-3 cm of protective paper and secure the adhesive side to the sash. Then, holding the film with one hand, the other gradually unfastens the paper and presses the film. Smooth out with a spatula if necessary.
5. They install the fittings (preferably new) and put the facades in place.

Today's fashionable trends are facades with different designs, allow you to combine single-color sashes and doors with images or patterns. This technique is very effective when it is necessary to change the proportions of a room and is readily used by professional designers.

Eco style kitchen

The ideal option for such an update would be rattan fabric, offered in rolls or cut. The material is not cheap, but the look of the furniture is very impressive. Preparing for remodeling takes a little longer.

1. The rattan fabric must be moistened with water and left for at least 30 minutes so that the material absorbs moisture. When rattan swells, it increases in volume, and when it dries, it stretches like a drum.
2. Will be required wooden slats, with the help of which you will need to hold and press the canvas to the sash. The slats are selected according to color and texture. The shade can be changed using stain or colored varnish.
3. The facades are measured and the canvas is cut to size. A sash on which rattan occupies the central part looks more elegant, so the fragments are cut out somewhat smaller than the sash, and the planks are selected wider.
4. The material is secured to the kitchen facades using a conventional stapler.
   The edges of the rattan insert are pressed with slats and secured with furniture nails - without heads.
   After updating, the sashes are installed in their places.

There are many methods for updating a kitchen set. Most of them do not require high costs, takes very little time and is done by hand.

After completing another renovation, many are faced with the question of arranging the room. Often, old furniture may not fit the style of the interior, its color scheme, or simply become boring. for a long time use. Buying a new headset can hit your pocket hard, so it's great to constructive solution This issue will be an independent restoration.

Updating kitchen facades and countertops with your own hands will help old furniture give new life

A kitchen set restored using self-adhesive film looks stylish and unusual

There are many positive aspects to updating the appearance of furniture yourself. First of all, this is a big money saver, since the cost of materials for restoration is much cheaper than ordering new kitchen furniture. Working with your own hands will allow you to create unique interior, bringing all personal design ideas to life. Modern assortment construction solutions will help you update your kitchen set different ways, for every taste and wallet size. You can update any of the elements kitchen interior, you just need to choose the most suitable option for a specific situation.

Updated kitchen interior after restoration of kitchen facades

Choosing a restoration method

Beautiful kitchen cabinets decorated using decoupage technique

In order to decide on a method for updating the kitchen furnishings, it is important to understand how serious changes in appearance are needed in the final version. The simplest option is to cover the facades with film. This will help change the color and also hide defects in old kitchen furniture resulting from use. In case of serious mechanical damage surfaces, it is possible to replace individual parts (facades, walls, doors, shelves), as well as replace furniture fittings (handles, hinges, locks). Fashionable decor trends are decoupage and facade molding, which, thanks to simple operations, will help breathe new life into the kitchen set. Simple and at the same time effective solution is painting furniture. In any case, the choice of restoration method should be tailored to the needs of each room individually.

Do-it-yourself furniture repair - restoration of a wooden kitchen

What is decoupage?

DIY kitchen decoupage in Provence style

Updating a kitchen set with your own hands in a “hand-made” style is quite modern and interesting solution. Decoupage is one of the most popular DIY decor options. Its meaning lies in decorating furniture elements with available household items. The most commonly used are paper, papier-mâché, fabric, glass, old wallpaper, and various household items.

For DIY kitchen decoupage, decoupage cards are more suitable than napkins.

When decorating facades in this style, it is important to properly pre-treat the surface. Wooden elements it is necessary to sand, plastic ones must be thoroughly washed and degreased (with alcohol or solvent), metal ones must be completely free of corrosion. Among the advantages of this method, it is worth highlighting its low cost and unlimited flight of imagination, which can be translated into reality.

Even a beginner can decorate boring facades of a set or hide local damage with drawings created using the decoupage technique.

Molding and painting

You can turn a minimalist kitchen with solid fronts into a classic one by gluing moldings or carved parts onto them and then painting them

Molding is a type of facade decoration with an overlay additional elements. The added elements are cut out of wood to fit the dimensions of the façade being processed. You can do this yourself or order the necessary parts from specialists. This method is suitable for wooden surfaces to which new pattern can be adapted without special effort and narrow-profile instruments.

An integral part of the molding is the subsequent painting of the facades of the product (or opening the surface with several layers of varnish). This method of giving the finished environment a solid and uniform look is the most rational and affordable. The surfaces to be painted must first be sanded and thoroughly degreased.

Before painting the headset, wall cabinets can be supplemented with shaped brackets

Restoration kitchen countertop with your own hands

The table is the main work surface in the kitchen, which is why it wears out in the shortest possible time. Often, it is the tabletop that becomes unusable, due to which there is no reason to change the entire set. In this case, an excellent solution would be to restore not the entire kitchen set, but only its individual part.

Sealing minor scratches and potholes on the countertop are made with wood putty

To update the table cover, you should pay attention to the combination of wear resistance of the material and its combination with the rest of the room furnishings. An interesting option the countertops look like artificial stone, marble and granite. They cost more than chipboard products, but due to their much longer service life, these costs pay off quite quickly. Chipboard is much less resistant to moisture and mechanical stress than stone, which is a very important aspect for the kitchen.

Polishing the tabletop with a felt wheel

More simple option is covering the countertop with tiles or mosaics (preferably in a color that matches the rest of the interior). This method is simpler, as it does not require dismantling the old countertop, as well as measuring and ordering a new one.

Porcelain or ceramic mosaics can decorate not only furniture

Changing the color of the facade

Restoration of kitchen facades using painting

In order for the kitchen to sparkle with new colors, it is enough to change the color of the furniture facades. This is not difficult to do, since modern Construction Materials With their assortment they offer many options for executing this idea.

Thanks to the use of a roller when painting furniture, the texture of the facade is not disturbed

The most practical and affordable of them is pasting facades with a special film. The choice of colors and patterns will allow you to choose the material to suit absolutely any kitchen design. You can choose any shade of film, as well as many patterns that copy natural ones (stone, wood, metallic, etc.). Ease of operation affordable price, good moisture and wear resistance have made self-adhesive films one of the most popular materials for restoring old furniture.

If the facades of the set have glass inserts, only the back walls of cabinets can be covered with film

When gluing, you must first prepare the facade. It is important that it is free from unevenness and roughness, because otherwise the film will not lie smoothly and beautifully. No special skills are required for this work, you just need to be careful and patient.

The fastest, most affordable and easy way restoration of kitchen furniture - decorating its surfaces with self-adhesive film

Inserts made of rattan fabric are becoming increasingly popular, covering the facades with which will also help transform the appearance of the furniture. better side. Before cladding, measurements and cutting of the material are necessary, which is subsequently attached to the facade using a construction stapler. Rattan can cover either the entire surface or only its middle. Staples can be closed if necessary decorative strips. Before attaching the canvas, it must first be soaked in water.

Restored facade with rattan inserts

If the material being processed has no obvious mechanical damage, painting is an option. This method is great for facades, but not for work surfaces. You can paint anything in a convenient way, however, when working with a spray gun, the layer of paint lays down more aesthetically than with a paint brush or roller.

It is better to treat the panel surface grinder, and the relief milling will have to be cleaned manually

Materials for updating old kitchen furniture are widely available and can be purchased at any hardware store. Among the most common Supplies and the tools necessary to perform these works can be distinguished:

• adhesive tape;
• paint (various types from acrylic to primer);
• moldings;
• improvised materials for decoupage;
• varnish for wood processing;
• tiles or mosaics;
• glue (for working with wood, as well as mortar for laying tiles);
• fastening materials (screws, nails, plugs);
• fittings (handles, hinges, etc.);
• marking tool (ruler, tape measure, marker);
• cutting tool (scissors, stationery knife);
• construction stapler;
• painting tools (spray gun, brushes, roller);
• sandpaper or grinder with a special attachment (for cleaning the surface);
• drill;
• hammer;
• circular saw or jigsaw.

It is worth noting that the process of restoring old furniture is not only relevant, but also quite exciting and affordable.

MDF and chipboard are porous materials that require priming before painting

When wondering how to update a kitchen set with your own hands, you should start from your financial capabilities, the scope of your imagination and the surrounding interior of the rest of the room. Even a person who does not have special design skills should not have any particular difficulties with this type of work, and special materials and tools.

The ends of furniture doors are painted especially carefully.

You can decorate your kitchen in a new way by replacing the facades with new ones.

Video: How to update an old kitchen

Return