DIY extendable children's bed. We take care of the rest of the younger generation by making a children's bed with our own hands from wood

Parents strive to provide the best for their children. In stores and markets, prices are rising all the time. This applies to any goods, including furniture. Adults are forced to save on a lot. They often have to arrange housing on our own. A children's bed made with your own hands will cost less than one bought at furniture showroom. Making a cozy bed for your baby is easy. This is done in a couple of days. Here you need to have a desire to work.

Children grow up quickly, and furniture is quite expensive.

To make a bed with your own hands, you need boards and beams made of wood that does not absorb moisture well, for example, pine or oak. First, two pairs of legs are made. For the headboard, the supports should be longer, since the back is higher here. This is necessary in order to be able to raise the pillow higher and recline in bed, for example, while reading. Typically, a do-it-yourself baby bed is made using the following materials:

• bars;
• plywood;
• boards;
• PVA glue;
• stains;
• varnish

In a regular crib, a child can sleep for three, maximum four years.

Natural wood does not emit harmful substances, so babies do not have allergic reactions. Such furniture is reliable, durable and looks good. A properly made crib is the key to a comfortable sleep. If the room is small, the product is made in such a way that it serves as a playpen during the day. The size is taken based on the length and width of the mattress.

The bed should be as comfortable and functional as possible.

Usually you don’t make it yourself, but buy it in a store. Children's mattresses, as a rule, are developed together with orthopedists. Here is given Special attention correct formation spine, and also takes into account the child’s body’s needs for healthy and restful sleep.

In fact, a do-it-yourself bed for a child is made “on time”; you can do it.

Children from 4 years old buy a mattress for spring block, Where individual elements united by a metal frame. On it, the weight of a sleeping child is evenly distributed over the entire area of ​​the product. For infants, it is better to use mattresses without springs, consisting of foam rubber. In a child's bedroom, it is advisable to install the bed away from the window opening. This will guarantee that the child will not be blown through by a draft.

To make a baby crib with your own hands, you do not need any professional skills, and the process will take a maximum of 3-4 days.

There should not be a chandelier hanging above the child’s sleeping area. Light bulbs often burn out. Sometimes it happens that when a lamp fails, its glass scatters in different directions. A glass shard can easily injure a child. If there is a shelf for books hanging above the baby, you should make sure that it is nailed to the wall firmly enough.

The main thing is to use only high-quality materials and carefully think through the entire process from start to finish.

Basic details of wooden beds

Although wooden crafts for kids they are expensive, but individual parts can be purchased at a reasonable cost. It is advisable to carefully sand the purchased blanks with your own hands so that the child does not get hurt on any protruding splinter. The product consists of the following parts:

• frame;
• slats;
• sidewalls;
• backrest;
• legs

As a result, both the child and the baby himself will be happy.

The frame is made of planed and well-polished boards. The slats that support the mattress from below consist of slats. They are inserted into grooves cut into the frame and form a grille for ventilation of the mattress. The distance between them is approximately 5 centimeters. The sides serve as a fence, thanks to which the child will not fall down. The supporting backs are filled with plywood sheets.

But if the baby has a large build, the parameters of the blanks can be changed upward.

To support the mattress, special grooves are cut into the frame. Wood glue is applied to the slatted ends. The slats are inserted into the holes. To make the fixation more reliable, self-tapping screws are screwed in from the outside. The backrests are made using vertical beams connected by crossbars. Next, plywood or wooden rods are installed.

Furniture stores have a huge variety of crib models for different ages.

The back and front sides are filled with strips and fixed with glue. The near side is made one third lower than the far side. This makes it more convenient to care for your baby. The holes in the cross bars are filled with PVA glue. Then the wooden fencing rods are inserted there. The parts must fit into each other tightly, without any backlash. Use a square to check the correct angles. All angles must be 90 degrees. The assembled sides are placed on a flat surface until the glue dries completely.

But the first factor in choosing a crib for a child should be the material from which the piece of furniture is made.

Necessary tool

If you poured a lot of adhesive into the grooves, some of it will, of course, come out. There is nothing to worry about here, since in the dried state the glue can be easily cut off with a knife. Next, the remaining panels are attached, which will serve as the headboard and footboard. They are screwed to the sides with screws countersunk heads. Each screw must be completely recessed so that their heads cannot be felt. Later, these recesses are covered with putty and sanded. During operation, the following tool is used:

• wood saw;
• manual frezer;
• Sander;
• corner;
• screwdriver.

If necessary, we clean the shields over the entire surface.

After the bed is assembled, it needs to be decorated. To do this, all the cracks between the connected parts are covered with putty. When the putty is completely dry, the treated areas are sanded with fine sandpaper. Next, the assembled structure is treated with stain. This will protect the tree from negative influence moisture. After the stain has dried, a layer of varnish is applied. Since the furniture is intended for a baby, all impregnations must be natural, not containing toxic or aggressive substances.

The only drawback wooden furniture, sold in most stores - this is an “exorbitant” cost.

During assembly work, the mounting screws should be screwed in to the maximum possible depth so that they are completely recessed. The resulting depressions are later closed with plugs or covered with putty. The assembled structure must be strengthened with special corners. Further ready product coated with varnish or wood wax. If you decide to add wheels to the crib, then do not forget to make locks for them.

A DIY children's bed will cost parents a maximum of 17 thousand.

Advantages of hand-made children's furniture

If the baby's room has small sizes, the crib can be made with drawers. They are convenient for storing toys, bedding and baby clothes. Such functional furniture saves space and eliminates the need to clutter the room. additional cabinets or chests of drawers. The advantages of a homemade children's bed are:

• the ability to design a model that fits perfectly into the interior of the room;
• confidence in the quality and reliability of the product;
• the ability to use only materials that are safe for health;
• relatively low cost.

Designing and making a crib yourself has advantages over buying a finished product in a furniture store

When all the parts and working tools are prepared, you need to carefully consider the process of making the bed itself. This type of work is best done outside the home, as there will be a lot of sawdust and dust. If it is not possible to work outside, room furniture should be covered with plastic wrap and the carpet should be removed from the floor. For a small room, you can make a bed, the sleeping place of which is on the second tier. Below, instead of a bed, a soft carpet is laid on the floor. This option will be convenient if you have only one child.

The best option is two large drawers so that you can put large toys and bed sheets.

On the first floor, the baby will spend time playing games, and on the second tier he will climb a ladder to relax. Usually the process of climbing to the second floor gives children great pleasure. If a child likes to draw, you can put a small table and a chair on the ground floor. For two children, a regular bunk bed is made. Structurally, such products are designed differently. The lower floor can be located exactly under the upper tier, or located perpendicularly.

For beauty, the crib can be opened with primer and varnish.

Sometimes steps are also used as lids for boxes underneath them. In each such box you can put children's toys, linen, and clothes. Before you start making a bunk bed, you need to decide on the place where it will stand. You also need to decide which side is best to mount the stairs to the second floor. If the room has a low ceiling, the upper tier should not be very high.

After you decide on the size and appearance of the bed for the child, look at photos of popular models on the Internet and find the necessary drawings, you can begin making a royal bed for the baby

The closer the child is to the ceiling, the more stuffy air he will have to breathe. On the other hand, it is advisable to take into account that an adult should not rest his head on the second tier when he sits down with the baby. The height of the first tier is associated with the comfort of sitting on the bed, as well as with the fact that a drawer for bed linen can be built below. Relying on this information, we can conclude what dimensions the furniture being constructed should have. The most popular options for cribs are as follows:

• transformer;
• sliding;
• one-story;
• two-tier;
• rocking chair

To ensure that the dimensions of the mattress and crib match, it is better to first buy a mattress, and only after that proceed to drawings of the crib.

The transformer usually folds up during the day, thereby freeing up space in the room. For this model, a special frame is attached to the wall, where the folded product is removed. In order for the visible façade of the bed to fit into the overall style of the room, it should be decorated. The extendable bed is made of two parts. As the child grows, it can be lengthened. For this purpose, special wheels are located at the bottom. A two-tier model is most often made for two children.

The tools you will need are a drill, a jigsaw and a grinder.

Manufacturing conditions for bed parts

If you purchased wood material straight from the sawmill, then before you start making parts, the bars and boards need to be kept for about a week in the room in which the manufactured furniture will be located. This is necessary so that the humidity of the room is equal to the humidity of the materials. Otherwise, in the future, some parts of the bed may crack or warp. When the material acquires the required parameters, the boards and bars must be planed and thoroughly sanded.

All materials can be easily purchased at a hardware store.

The vertical beams of the bed should be of such a height that sides and backrests can be built above the top bed. The front side of the lower tier is most often made removable. The crib guard is important means security. Its reliability should be given special attention. The fencing boards are screwed to the support beams with self-tapping screws from the inside. The caps must be completely screwed into the wood. During the manufacture of the fence, you need to leave an opening for the steps.

For a small room, a similar version of a crib with a second floor would be perfect, but there would be no first floor.

Stairs are usually made strictly vertical or inclined. First, two beams are attached, which will act as guides. Then the steps are screwed on. The top step and the ladder itself are attached to the bed with long bolts. After the fence and steps are installed, plywood sheets are laid on which the mattresses will be placed. Since all the details of this product They are fastened with screws and bolts; subsequently it can be easily disassembled and moved to another place.

This process usually gives children a lot of pleasure, and sleeping on the second floor is much more interesting.

This bunk bed is very durable and reliably serves for many years. If you paint it beautifully and then cover it with matte nitro varnish, it will not reflect the glare of the sun and will retain the naturalness of the designs for a long time. The inside of the sides can be finished soft cloth, which will protect the baby from drafts and bruises.

If a child goes to school, or just likes to draw a lot, the space under the bed can be equipped with a desk.

Thus, even in a small children's room there will be more space for games and other entertainment.

VIDEO: DIY crib.

The birth of a child is new stage in the life of a young family. They prepare for it in advance, at this moment the parents become closer, jointly showing care for their child. Things necessary from the first days appear in the house: oilcloths, diapers, nappies, a bathtub, special means hygiene, personal sleeping place. The cost of all the required items can be very burdensome for young couples, sometimes unaffordable. Many people try to save money, for example, they make their own toys or make a crib with their own hands.

If you draw up a drawing correctly and plan the design of the bed, then the furniture can be used for a long time, from the moment the child is born until his fourth or fifth birthday. It is extremely important to teach your baby to sleep separately from the first day. It is unacceptable to put him to bed in his parents' bed. Although most mothers sleep very lightly, something irreparable can happen in their sleep. In addition, it is difficult to wean a child from the parental bed.

Advantages and features of making a bed with your own hands

Furniture stores sell many models of cribs made from various materials. Wood and its derivatives are mainly used, but plastic options are also found. It is not always possible to find furniture for a newborn that meets all requirements, and suitable products vary greatly at a high price. In this case homemade designs will become an excellent alternative, they have a number of advantages, expressed as follows:

1. Price. Furniture made by yourself will cost much less than purchased analogues, which will help save the family budget.
2. Reliability. During the preparation and assembly process, the strength of all components is checked at each stage.
3. Environmental friendliness. A bed for your son or daughter is made only from natural wood, which does not emit harmful substances.
4. Exclusivity. A independently drawn up drawing will be the key to an individual, unique product.
5. Gaining experience. While working, a person acquires new skills that can later be used in the production of similar items.
6. Compatible with the interior and style of the room.

When making a bed, you should adhere to certain rules:

• for work it is necessary to use exclusively environmentally friendly materials, which include natural wood;
• the surface should not have sharp corners, roughness, chips, or protrusions;
• The product must correspond to the height, weight, and physiological parameters of the baby.
• It is necessary to provide protection against falling and rolling of the child.
• For small apartments or houses, multifunctional structures are suitable; for this you can use the free space under them, install additional drawers, or create a play area.

Designs and sizes of children's beds

The easiest way to make standard furniture, which consists of four legs, a frame, a mattress and a headboard. The model is used exclusively for baby's sleep. If you fence the sleeping area around the perimeter with walls with bars, you will get a classic crib for a newborn. Although for this category you can use a cradle, playpen, rocking chair, and attached options.

IN small spaces It is more practical to install multifunctional items. To do this, they are equipped with drawers, a chest of drawers, and other useful elements. A bed with a loft, where the sleeping place is placed on the second tier, is very functional. From below you can organize playground, install lockers for storing items.

Furniture made in the shape of a typewriter looks unusual. This is an option for older children who have not reached adolescence. Non-standard design will allow you to create invisible cabinets inside, hidden under the hood or behind the door. You will have to tinker with many elements, which will require certain carpentry skills.

Among non-standard designs, you can choose a bed-house. This model is suitable for children over 3 years old. There are all the elements of a standard item, as well as doors and windows, gable roof. Decorative items They will decorate any interior and will delight every child.

What material are beds made from?

When constructing children's furniture yourself, you need to decide on the materials that will be used in the work process. The main requirement is that the raw materials used must be environmentally friendly and not harm the baby’s development. Let us dwell on this issue in more detail, consider best option for all components designs:

1. Mattress. It is recommended to purchase it in a specialized store, since purchased models are produced taking into account the recommendations developed by orthopedic doctors. If you plan to use the bed for more than one year, then it is better to choose double-sided products with different degrees of hardness. For children under three years of age, a hard, rigid covering is required, which helps support the back and the proper development of the body. The filling should be wool; you should not take models that contain cotton wool and foam rubber. The upholstery should also be made of natural fabric and have an antiseptic coating.
2. Frame, slats, legs, sides. For your beloved child, you should choose only a tree. Suitable for work conifers: pine, spruce. Natural wood breathes, it is quite durable, and will suit any interior. Those who decide to use MDF or chipboard should remember that the boards contain phenol and formaldehyde resins, so it is necessary to take only models with emission class E-0.
3. Protective means. To extend the service life, wooden surfaces are treated special compounds, they are painted and varnished. For these purposes, nitro enamel, acrylic, water-based paint for children's rooms. Great option will be the use of wax. To preserve the wood texture, you can use acrylic varnish, other options are highly toxic.

Subject to availability Money You can purchase dense types of wood: solid oak, larch. This is the most durable material, the products look rich, but processing the raw materials is quite difficult.

Making a bed with your own hands

Having firmly decided to build a structure yourself, you should understand all the nuances associated with its creation. Initially, a drawing is developed that displays all constituent elements. Then they acquire the materials necessary for the work, prepare the tools, and if any of them are missing, they buy them in addition.

Based on the diagram, raw materials are divided into component parts. They are cut out, combined into a single structure, treated with special compounds, painted, varnished, and decorated. For clarity, we will consider in detail the main stages that the process of making a classic crib includes.

Drawings and diagram

The creation of any object is impossible without a drawing. In a graphic image made to a certain scale, the dimensions of the nodes are indicated. To compile it, you will need minimal drawing skills; you can also use special programs. When developing a project, you should consider:

1. Dimensions of the room where the product will be installed. The spacious room can accommodate a larger bed.
2. The dimensions of standard products for children under three years of age are 120x60 cm. If you plan to use the design in the future, preference should be given to larger models 150x60 cm, 180x70 cm.
3. At the bottom of the crib you can equip cabinets in which children's things will be stored.
4. For preschoolers, it is worth providing removable sides that will protect them from rolling and falling.
5. Design and decorative design is selected depending on the preferences of the parents.

Required tools and materials

To make and assemble the bed you will need the following materials:

• board;
• MDF sheet;
• varnishes and paints;
• screws, fasteners, rubber heels for legs.

Tools:

• wood saw, jigsaw;
• hammer, screwdriver, screwdriver;
• drill, drill bit;
• measuring instruments, a simple pencil.

Main parts and their preparation

A standard bed consists of 4 legs, 2 backs, sides, removable sides, frame, slats, mattress. The last item from the list is purchased at finished form, the rest are made by hand. The process looks like this:

1. In accordance with the drawing, markings of all components are applied to the tree. This can be done using a tape measure and a simple pencil.
2. The elements are cut using a jigsaw or saw.
3. The components are sanded with sandpaper.
4. Depending on the length of the sidewalls, they are cut with a grinder metal corners, used to install the mattress. Holes are drilled in them for self-tapping screws to secure them to the wood.
5. All components are painted and varnished.

Main assembly steps

Work on assembling the bed is carried out in the following sequence:

1. The backrests located at the head and foot are assembled. They are connected to the legs.
2. Prepare the base for the mattress. To do this, metal corners are attached to the wooden sides using self-tapping screws. The lamellas are fixed to them from above, perpendicular to the side walls.
3. The backrests and the base under the mattress are connected using furniture fittings, for reliability it is better to use corners.
4. A mattress is installed on the frame.
5. Removable protective sides are added to the sides, secured to special metal or wooden fittings.
6. If necessary, the finished product is decorated.

Manufacturing and assembly of a bed-machine

Children will be delighted with this design. Anyone can make it. To do this, you will need to draw up a drawing or download it online. After which you can start cutting out the components and assembling. The work consists of the following stages:

1. The side and front walls are made from furniture panels.
2. Cutouts are made on the side surfaces, imitating car doors, through which it will be convenient for the child to get inside.
3. On one of the end parts, using a jigsaw, carefully cut out holes for the headlights and radiator.
4. Next, several more planks are cut out to imitate a car hood and windshield.
5. The wheels are being prepared.
6. Wooden corners are attached to the side walls, on which the base for the mattress is laid.
7. Assembled from prepared parts rectangular frame, which is installed on wheels.
8. The resulting workpiece is painted or varnished.
9. The base is fixed inside the frame and the mattress is laid.

Features of assembling a bed for newborns

For newborns, the bed design should be slightly different. Its standard size is 120x60 cm; when the child reaches 3 years old, it will become a bit cramped for him. When planning, it is worth considering the possibility of adjusting the height of the bed. When the child is small, it is convenient to place him higher, but as soon as he learns to stand up, the bottom will have to be lowered for safety.

For a comfortable sleep for the baby, parents, neighbors, it is worthwhile to provide one removable side or end wall in the crib, which will allow it to be placed near the parent’s wall. The distance between the rods around the entire perimeter is made within 2.5 - 6 cm. This optimal sizes, in which the child will not be able to pinch his fingers or stick his head through. Do not forget about the strength of the product and good fixation of removable elements.

In addition to the listed features, the legs of the bed are often installed on wheels, making it mobile. Pendulum mechanisms or rocking chairs are also equipped. Their use is recommended by pediatricians. This makes it easy to lull your baby to sleep. It is advisable to use the bumper only in the first months; subsequently it should be removed to increase the overview of the child’s understanding of the world.

Bed decor with soft sides of your own making

Not only dad can contribute to the family budget by building a ready-made crib. Mom can also join this process by decorating the product with soft sides. Externally, the craft resembles covers filled with filler. In addition to a decorative function, they also have a practical function: they protect the baby from accidental impacts on the bars, and do not allow him to stick his hand between them. When sewing them, certain requirements must be observed:

• The fabric should only be natural; linen, calico, and cotton are suitable. Wool must be used as filler.
• It is better to choose the material in light, pastel shades, which have a good effect on the child’s psyche.
• If a drawing is provided, then it should be made in medium size; a small one will irritate him.

Master class on making a bunk bed

This perfect option for a family with two children of the same age, be it a boy and a girl or same-sex children. Design bunk bed repeats the single-tier one. The only minor differences are the presence of a ladder, the height of the product, and the mounting of two stocks on the same supports. For safety, there is a side on top located around the entire perimeter. To understand all the intricacies of the model, consider a master class on making such a bed:

1. We prepare boards with a section of 3.5x10 cm. According to the chosen pattern, we cut out 4 blanks of 190 cm, 4 of 180 cm, 4 of 80 cm.
2. On 190 cm boards, retreating 30 cm from each edge, on both end sides We make grooves at the top and bottom for the width of the crossbars 3.5x10 mm.
3. Assembling the side backs. To do this, two support legs are connected using 80 cm segments.
4. The finished backs are connected using 4 pieces of 180 cm each, installed in the outer end grooves.
5. We make the base for the mattress from above and below. To do this, slats are nailed along the perimeter of both tiers on top of the sidewalls. Here they can not be recessed, thanks to the sides located in a circle.
6. We install the stairs. Its length should be the distance from the lower edge of the side partition to the upper edge of the support.
7. We install the sides and lay the mattress.

Making your own bed with storage drawers

As a basis for the manufacture of such a design, you can take any drawing of a standard bed. The only difference will be the presence of full side walls and drawers. First of all, it is necessary to determine their number. This could be one element that occupies the entire space under the crib, two, or even three. It is also worth considering the type of retractable parts. There are two cardinal different options: independent from the main body, attached to the frame, retractable on guides.

The process of constructing the product will be similar to preparing and assembling a regular single children's bed. Here it is necessary to provide not legs, but side walls and intermediate partitions on which the guides will be attached. It is also worth considering the fact that the gap between the floor and the bottom of the tray should be at least 1 cm.

To make the box itself, you will need to prepare four pieces of wood; their dimensions depend on the size of the space under the crib. Next, they are connected into a rectangular or square box, nailed from below chipboard sheet, plywood. To strengthen the structure from the inside, 4 support strips are installed from below along the entire perimeter, and an inset bottom is made, which allows you to store heavier items.

Decoration methods

Equally important for a child's bed comfortable conditions and practicality of design. To improve the baby's conditions, auxiliary decorative elements are used, which also carry a number of useful functions. Let's consider the most popular options for decorating this item:

• Canopy. An elegant canopy that is sewn from any natural fabric. This item is recommended to be used for up to 4-5 months.

In addition to decoration, the product serves as protection against insects. It collects a lot of dust, so it needs to be washed often.

• Canopy. Unlike the previous option, only light, transparent materials are used: tulle, organza, veil. Fastening is done using a rod.
• Valance. This is the bottom edge frame. sleeping place. It covers the lower part of the furniture, which will perfectly disguise some mistakes made when making the crib yourself.
• Hanging toys. Often hung in pairs with a music mobile. This type of decor is made from cardboard or fabric. Contribute to the development of the child. They can have the most varied appearance, be it snowflakes, animals, flowers or others.
• Stickers. You can buy them at any furniture store. When fixing them, you should make sure that the child cannot reach them.

Painting a bed - which paint is best to use?

At industrial production children's beds are used oil paints. They improve appearance, protect the surface from damage, they are easy to clean from dirt. At independent choice coloring agents, you should study their composition, make sure that it does not contain toxic, poisonous elements. These requirements are met:

• Acrylic paints on water based. Are different high cost and good performance.
• Nitro paints. They have no pronounced odor, are inexpensive, and dry quickly.
• Water-based. Characterized by a long service life. With their help you can hide shallow cracks.
• Wax. The most expensive option. It's flawless high-quality coating with water-repellent properties.

A person cannot live without a pillow. This is due to the structure of the human body. The element supports the curvature of the cervical spine and promotes blood flow to the brain. This item begins to be placed on the child at the age of 1-2 years, depending on his physical development. The product must have rectangular shape from 30x40 to 40x60 cm. Its thickness should be: for children under three years old - 3-4 cm, after - 5-6 cm. Its elasticity plays an important role; a pillow that is too soft will lead to pain in the cervical vertebrae and rapid fatigue.

Bird down, natural wool, buckwheat husk, holofiber, and latex are used as filler. The last three options are the best in terms of elasticity. When selecting fabric material, preference should be given natural fiber, treated with antiseptics. It is better to choose models in which the cover is fastened with a zipper, then you can control the condition of the filler.

Unlike a pillow, a mattress is necessary from the first days of a child. It must be hypoallergenic, safe, and absorb and evaporate liquids without problems. For kids too great importance has elasticity, so it is necessary to take only orthopedic products. Otherwise, the requirements for filling and covering are almost the same, as for pillows.

Choice of bed linen

Any person gains strength during sleep, and babies still grow and develop. Every parent wants to make this moment calm. In this matter, they are helped by bed linen, which should be of high quality, made from natural materials. For these purposes it is used following types fabrics:

• cotton,
• chintz,
• satin,
• calico,
• bamboo.

The color of the selected canvas should be neutral, it is better to use pastels, bright hues, conducive to sleep. For newborns, a product without a pattern is suitable; for older children, but not teenagers, underwear with a print of their favorite characters from cartoon series is suitable. Also, when choosing bedding, you should pay attention to:

• the material should not lose its structure and color from frequent washing;
• Do not take underwear with buttons, ribbons, or lace;

Conclusion

Having studied ready-made diagrams, having considered all the positive and negative aspects associated with self-production cribs for your baby, any parent can build similar design. In this case, all family members can participate in the process. Dad will prepare and assemble the frame, and mom will select a mattress, pillow, bed linen, and make decorative elements with her own hands. This will not only save the family budget, but will also show the child that he is cared for and loved.

For children, parents always try to choose the best, including furniture, but looking at the very high prices for children wooden beds, or on beds - cars, boats, etc. You will inevitably wonder whether it is worth buying such a thing for several years... Maybe not, but you can make it yourself. A do-it-yourself children's bed can be assembled from several boards and bars in a few days. Especially complex work or special tools are required. Mostly you need hands and desire.

Wooden bed

This is a regular bed without any tricks. In the presented version it is suitable for average school age and teenagers, but further it can be completed for children from 3 years old (second photo report). Assembled from wooden parts (boards and bars). The project can be used as a basis, then adding design ideas.

You can argue about the color, but as a base it’s an excellent option

Materials and tools

Manufacturing does not require any special tools. All that is needed:

The materials needed are:

• timber - 50*100 mm;
• board 25*100 mm and 25*75 mm;
• wood glue;
• wood putty;
• sandpaper.

Calculate the number of boards based on the planned dimensions. Requirements for wood are low humidity (not higher than 16%) and the absence of knots or a small number of them.

Making legs

A DIY children's bed begins with making the legs. We cut blanks from 50*100 mm timber - longer for the headboard, shorter for the footboard. You need 4 pieces of each length. We glue the blanks in pairs. We take one, coat it with wood glue, lay the second one, check whether they are aligned evenly, and twist it with self-tapping screws. In principle, you can use 100*100 mm timber and not bother with glue, but the price for it is very high.

We recess the screw heads into the wood, then seal them with wood putty. After drying, sand until smooth (with medium or fine sandpaper).

We also use sandpaper to bring the joint to perfect condition - everything should be even and smooth.

For the backs you will need boards with a groove 25 mm wide. If you have a router, you can make it yourself or turn it in a carpentry shop. You can also buy dowels ready-made; select a drill according to their diameter.

We drill holes for dowels at the ends of the planks with grooves. Determine exactly their distance from the edge - they must be strictly at the same level on all planks.

Also, the holes should be the same depth - half the length of this piece of wood. In order to be able to navigate when drilling, a marker strip is attached to the drill masking tape. It is used to control the depth of the hole.

Assembling the headboard and footboard

From a 25*50 mm board, planks of the same length are cut to fill the headboard and footboard. They are inserted into a groove coated with glue in advance.

We also drill a hole in the leg for dowels. First, we find the middle and draw a line along it (with a pencil). Place the assembled back, align it along the top edge, align the dowels on a line and mark the places where you need to drill holes for them (two at the top, two at the bottom). Pour a little glue into the holes and place the back. It must be planted tightly, without gaps. You can tap with your fist or mallet (do not damage the wood).

We repeat the same operation with the other leg. The not very beautiful joint at the top can be covered with a board, placing it on screws and covering the holes. As a result, this is what happens.

One important point, which concerns gluing parts. While the glue has not hardened, the joints are movable and the parts may become warped. Therefore, having set the angles to 90°, the part is fixed (with clamps or some other way) and left until the glue dries. The work continues after drying, and, as a rule, it begins with sanding the joint that has just been glued.

Making the base for the mattress

We take two boards 50*100 mm long, equal to length mattress (or a couple of centimeters more to make filling more convenient). We install a 25*50 mm plank along the edge using glue and screws. It is 10 cm shorter in length - leave 5 cm on each edge. When screwing the bar, we make sure that the edges are aligned accurately. We drill a hole for each self-tapping screw - close to the edge so that the wood does not burst. In addition, we make a hole of a larger diameter along the cap - they should be hidden.

Since the adhesive connection in in this case fastened tightly, you don’t have to wait for the glue to dry.

From a 25*100 mm board we cut slats to fit the width of the mattress (you can again add 1-2 cm). They are attached to the just made planks with an emphasis. The installation step is 10 cm, for each plank there are 2 screws on each side. A hole is pre-drilled for each self-tapping screw (the diameter of the drill is 1-2 cm less than the diameter of the self-tapping screw), the head should go into the wood.

The holes for fasteners are covered with putty and sanded after drying. Cutouts are made in the outer planks for installing legs.

DIY children's bed: assembly

We finally seal all chips and defects on the visible parts of the bed with putty, and after drying, sand it until smooth. Then we prime and paint it in the chosen color. After painting, all that remains is to connect the backrests and the base for the mattress and we can consider that the children's bed with their own hands is ready.

You can connect the parts using special fittings- brackets and curtains, or in a simple way - nailing a corner, a block on which to lean assembled shield for the mattress.

DIY children's bed assembled

Video on the topic

A costly event for parents. To cut costs and furnish the children's space with furniture, you don't have to buy it. One of available options- a crib, you can make it even if you have no skills.

Before you start making a crib, you need to make a calculation taking into account its design and prepare necessary materials. A bed made to individual measurements will not let you down in use.

When taking measurements, accuracy must be observed.

Design calculation and drawing

Selection of materials for assembly

When choosing materials, it is better to give preference to natural materials; solid wood and plywood are ideal for this purpose. Usage natural materials will save the child from toxic effects. You should purchase the necessary fittings, fastenings and other materials taking into account the design of the bed.

Use only well-dried wood, without visible damage or knots.

Necessary materials

The most expensive part of the cost will be on the mattress. There is no need to save money on buying a mattress, from
its quality depends on the health of the child. Orthopedic mattress guarantees a comfortable sleep and eliminates the problems of incorrect body position during sleep.

Where to start assembling a crib

When assembling, the screws must be tightened so that they do not stick out.

Assembling linen boxes

Once the base is prepared, you can begin making the cabinets. Typically, the crib has 1-2 cabinets with a pull-out mechanism. The base is made from solid wood, and the bottom is made of plywood.

If the child is small, you can make an educational mat for him yourself.

1. The cut material is sanded and assembled according to the drawing;
2. Equip the cabinets with a retractable mechanism, it is attached with self-tapping screws;
3. To make the cabinets easy to open, you need to attach handles.

The back or head of the crib

Depending on the type of crib, it can be decorated with additional elements - a backrest or headboard. The wooden back will prevent the child from touching the wall while sleeping and will protect the wallpaper. While the headboard will allow you to comfortably position the pillow. Combined models provide for the placement of a backrest and headboard.

1. According to the drawing, it is necessary to cut the solid wood according to the shape of the intended backrest. Standard height backs: 70-90 cm;
2. Before fastening the back or headboard, do not forget to sand everything with sandpaper;
3. Instead of self-tapping screws, it is better to use long bolts as fastening materials.

It is better to leave the parts of the headboard, footboard and backrest wooden; in this form the crib can be washed.

Finishing work

The moment the crib is assembled with your own hands, you can begin decorating it. You don't need any special tricks for this. Natural wood is absolutely harmless to the health of the child. So that its surface is well preserved and acquires smooth surface, wooden parts must be coated with non-toxic varnish. If the design provides bright colors crib, it can be painted acrylic paint.

You cannot paint the crib in a residential, unventilated area where there are children.

DIY bed making video

Detailed video material will allow you to make a crib from wood and then paint it with acrylic paint. The author of the video explains all the working aspects, from cutting parts to assembly.

Types of children's beds

Choosing a children's bed in favor of a special design poses challenges for parents not an easy task. Various models beds are classified according to functionality and dimensions:

• cradle cot for newborn children, size 90 x 45 cm;
• standard playpen size 120 x 60 cm;
• cot for preschoolers with drawers measuring 140 x 70 cm;
• transformable bed size after transformation 190 x 80 cm;
• bunk bed with drawers and ladder;
• custom cribs in the form sports facility.

Cradles and cots in the form of a playpen are designed for children from birth to three years. Using the diagrams presented on the Internet, you can make any model or in accordance with your own design. Painted in White color crib can be decorated using decoupage techniques and a removable canopy made of harmoniously selected fabric.

A crib for children from 3 years to primary school age will provide comfort during sleep and rest. Spacious cabinets with pull-out mechanisms allow you to store

Kids' things. Thanks to its simple design, it can be made in a few days. The presented model does not require additional decor. Unpainted wood looks natural and natural. Contribute bright colors Bright pillows and soft toys will help.

A transforming bed will help out in situations where you need to save space. A transforming version of a sleeping place for a child can be bought in a store or created with your own hands according to drawings. Bunk beds also allow you to save space in a children's room.

The top tier of the crib must be equipped with protective railings.

Beds of unusual shapes

Children are especially delighted with cribs of unusual shapes. It is a mistake to think that you cannot make an amazing sleeping place yourself. Using the drawings, you can make cribs of a wide variety of shapes. Men who love working with wood can try their hand at making a machine bed.

By building a bed in the shape of a sports facility, you can combine play and sleeping space into one. Active children will appreciate a crib with a slide or a fairytale house. Having studied complex design, such a model can be made with your own hands. To complement the sleeping area, use additional drawers and compartments for storing children's things.

What material is best to make a bed from?

The undoubted leader is natural wood valuable species.

1. The most common and available material- solid pine;
2. Using alder will allow you to get a bed of noble colors;
3. A beech crib will last long years, it will not creak, crack or become loose;
4. The beautiful structure of ash will give the piece of furniture a natural shine;
5. Using solid oak will allow you to get an exquisite crib in which you can raise several generations of children.

A homemade bed with your own hands is a practical solution for arranging a nursery. The design of the presented models is quite simple, so a novice craftsman can make it. Using the instructions, drawings and detailed video material, it is quite possible to make a bed for a child.

Return