Homemade glass table. DIY glass furniture

A glass table in an apartment interior is often used as a coffee table. It can enliven the decor of a room and is appropriate in a small room, as it creates a feeling of weightlessness of the product. The simplicity of the design allows you to make a glass table with your own hands. It is distinguished by its hygiene, as it is resistant to detergents and cleaning agents. Using modern materials to make the table will be very practical and inexpensive.

Preparation of material and tools

The tabletop can be cut from transparent, frosted, textured, tinted glass or mirror cloth. Transparent glass visually expands the interior of the room. A colored countertop can be an organic addition to the decor of the room. Dark color will create a “glamorous” style. Kitchen table with black glass, complemented by white chairs, will look impressive.

If you have no experience in making furniture, it is better to make a table with your own hands with a solid tabletop and metal legs. Having mastered the technology of working with such material, in the future you will be able to figure out how to make a table from glass of a more complex type.

For high quality workmanship table you will need:

• sheet of glass;
• metal legs;
• suction cups for attaching to the tabletop;
• wood glue for metal and glass;
• gloves and safety glasses;
• metal-glass glue, polishing paste.

Set of tools:

Tools for cutting glass: 1 - square; 2 - corborundum stone; 3 - compass for cutting glass; 4 - pliers; 5, 6, 7 - glass cutters.

• diamond or roller glass cutter;
• pliers with rubber pads;
• metal ruler of suitable length;
• grinder (grinder), drill;
• grinding discs, felt wheel;
• pencil for marking.
• file (emery block).

Glass should be purchased tempered, 6-12 mm thick. It must be clean and dry when cutting. On dirty material, the cut may be uneven. Having decided on the location of the homemade piece of furniture, plan its dimensions. Apply the accepted dimensions to the sketch. Mark the mounting locations for the legs.

Return to contents

Share on

In this article we will talk about how to make a glass table with your own hands. This piece of furniture is light, elegant and adds airiness to any interior. At the same time, it is easy to maintain, reliable and durable.

Type of tables

The glass table can be round, square, oval, triangular or any other shape. Coffee tables, kitchen and computer furniture are most often made from glass. The product can also be made from combined materials (metal, wood, plastic, rattan, stone).

The design can be framed or frameless; a piece of furniture can also have a base. For assembly similar products are used Various types glass: plain, frosted, tinted, tempered or triplex. Most often, structures with monolithic countertops are made from this material, but it is also suitable for the production sliding tables, transformers, tables with shelves.

Advantages and disadvantages of glass furniture

A DIY glass table has the following advantages over wooden, metal and any other furniture:

1. Aesthetics. This product will perfectly complement any room, but it will fit best into an interior decorated in high-tech style. Thanks to its transparency, glass creates a feeling of weightlessness and expanded space. A table of similar dimensions made from other materials will look bulkier and heavier than glass structure.
2. Hygiene. The furniture does not absorb dirt and odors and does not emit toxic substances.
3. Practicality. This material It is easy to clean; it must be treated with a special detergent and water.
4. Safety. Many modern views glass has increased strength comparable to the strength of wood. Breaking such material is not as easy as it might seem. In addition, it is covered with a special protective film. If the table does break, the fragments do not scatter throughout the room, the tabletop simply becomes covered with cracks.
5. Resistant to aggressive influences. The material is resistant to moisture, high temperatures and chemicals.

But such furniture also has disadvantages:

1. The appearance of unaesthetic stains on the surface due to insufficient wiping with a sponge.
2. Low resistance to mechanical stress. Scratches and small chips can appear on the surface quite quickly.
3. Contamination when touched with fingers (prints remain).
4. Ringing sound when dishes touch the table surface.
5. High price manufacturing. Not only the necessary materials are expensive, but also the equipment, for example, a special lamp for drying glue.
6. Relative fragility. The table may break.

In addition, for self-production For such products, it is advisable to have at least minimal skills in working with glass (cutting, grinding).

Preparing for assembly

To make a glass table with your own hands, you need to stock up necessary materials and tools. The master will need:

• sheet of glass with a thickness of 6 to 12 mm ( optimal thickness– 8 mm); It is recommended to choose a material based on its properties, the best option– tempered glass or triplex;
• 4 table legs, they can be made from metal pipes;
• Special glue;
• suction cups for legs;
• a thick sheet of plywood or chipboard; structural elements will be cut on it;
• gasoline or acetone for degreasing glass surfaces, vegetable oil for wetting the cutting part of the glass cutter;
• fine and coarse sandpaper;
• polishing paste.

You should also prepare the following tools:

• pencil, marker;
• ruler (preferably metal);
• roller or diamond glass cutter;
• a rubber hammer with which to break off the edges of the glass;
• grinding machine;
• felt circle;
• grinder or drill.

To avoid damage from sharp edges during the furniture manufacturing process, it is necessary to carry out all work wearing protective gloves, as well as special glasses.

Making a countertop

Before starting work, you need to prepare all the tools and thoroughly wash the glass on both sides. On next stage The tabletop is made, this is the most difficult part of the work. First, you need to decide on the shape and dimensions of the future product; it is recommended to prepare a drawing and indicate on it the dimensions of the structural elements. Then you need to mark the material for subsequent cutting of the tabletop of the desired shape and size.

Markings are made using a marker and a ruler; elements can be cut with a roller or diamond glass cutter.

The use of each type of tool has its own characteristics:

1. Cutting with a roller glass cutter. First, the glass cutter circle is soaked in oil, and then the master runs the tool along the markings. The pressure force should be two kilograms. If you were unable to make a cut the first time, you need to run the glass cutter several times over the corresponding area. After making the cut, tap the back of the glass with a rubber hammer.
2. Cutting with a diamond glass cutter. Excessive pressure must be avoided when using this tool. You should run the glass cutter across the material only once, after which the sheet should be placed on the edge of the table. This must be done in such a way that the cut area protrudes beyond the edge of the table. Then it is recommended to gently tap the inside of the glass with a rubber hammer, grab its edge and sharply pull it down or away from you. This will cause the edge to separate from the tabletop. Small fragments that have not separated can be removed using a glass cutter. This tool is equipped with a special slot that allows you to capture small fragments.

If a surface with curly edges is being made, then you need to draw a corresponding design on paper, and then transfer it from the pattern to the glass using a marker and run a glass cutter along the design.

If the product is round, then you need to draw a cross in the middle of the sheet, and then attach a thread or rope to the center of the cross. You should tie a glass cutter to the opposite edge of the thread and draw a circle with it.

After this, lines are drawn from the edges of the circle to the edges of the sheet at a certain distance from each other using a glass cutter. It turns out to be a kind of sunshine. The scraps of glass should be removed, sequentially separating one segment from the sun.

Sanding the product, installing legs

The cut tabletop must be sanded using grinding machine And sandpaper. Grinding should be carried out at low speed (up to 1700 revolutions of the grinder), since at higher speeds the glass may overheat. First, you need to sand with coarse-grained sandpaper, and then repeat the procedure with fine-grained paper. After this, the sandpaper should be replaced with a felt wheel coated with sanding paste, and the product should be polished.

The next step is to attach the legs to the table. A hole should be made in the upper part of each leg, and then a special suction cup designed for glass furniture should be attached using glue. After this, the product must be dried. You can also use suction cups with screws screwed into them.

Inner side The tabletops must be thoroughly degreased using acetone or gasoline, after which the legs should be glued and wait until the glue has completely dried. In this case, the choice of glue must be given Special attention, it should be high quality, suitable for glass furniture. Cheap glue will be visible through the transparent surface and will look like dirty streaks. Drying of the glue should be done using ultraviolet lamp with a wave frequency of 300-400 nm. When all the work is completed, the DIY table is ready for use.

Decorating the product

There are many ways to turn a glass table into a real work of art. To make this piece of furniture creative and original, you need to use one of the following glass processing methods: decoupage, etching or tinting, sandblasting, stained glass painting, placement inside a double tabletop various items, for example, dried flowers, grains, stones, shells.

Application of stained glass painting or decoration using the decoupage method is carried out with bottom side countertops. This allows you to protect the decor from mechanical damage and at the same time keep the surface of the table perfectly flat.

In a great way table decoration is the equipment of the table top LED backlight. Such furniture allows you to create a special, festive atmosphere in the room. This method can be used to decorate not only a table, but also a bar counter.

In addition, you can enclose the tabletop in wood, metal or plastic frame. Such a decision will not only change appearance design, but will also increase its reliability.

Glass looks stylish and elegant; it does not weigh down the interior, but rather, on the contrary, visually makes it lighter and more spacious.

This table is perfect for, if not any, then most room decor styles, although it will be especially good in modern interior. True, ready-made glass tables are not a cheap pleasure.

But there is a way out: why not make it yourself? This article will talk about how you can make your own glass table with metal legs in a high-tech style. But, if desired, by changing the design of the tabletop and legs, using the same instructions you can make a glass table in any other style: both modern and historical.

Due to its transparency, glass furniture unloads the interior of the room, makes it less bulky, visually expands and fills it with air and light.

Thanks to this feature, such furniture is especially often used in interior design. small apartments, offices, meeting rooms.

It should be noted here that glass is a material self-sufficient: It looks great on its own. However, it is rare to find entirely glass furniture, with the exception of shelving for storing collections of books or figurines. Much more often it is combined with some other material, for example, wood or metal. At the same time, the glass does not lose any of its aesthetic qualities. On the contrary, combined furniture allows it to literally transform and sparkle with new, sometimes unexpected colors.

For example, when making a table, you can combine glass surface with forged or carved wooden legs, which will give the furniture a more elegant look.

Advice. Excellent design solution— place a round or oval glass tabletop on a large and stable interior sculpture. Such an improvised leg, without special costs or additional decor, will in itself make the table unique and give it a special flavor. For example, if a sculpture in the shape of an elephant is used as a stand for the tabletop, then such a table will be especially good in an ethnic African style. And the leg in the shape of a Greek statue will allow you to successfully use it when decorating a classic interior.

As mentioned above, glass furniture, including tables, fits perfectly into almost any interior, and, in addition, visually expands small rooms and makes them lighter. But besides aesthetic qualities, it has many other advantages:

But, despite all these undeniable advantages, glass furniture also has flaws:

• stains may appear on its surface after insufficient wiping;
• objects knock loudly when they are placed on a glass tabletop or shelf;
• Fingerprints may remain on the glass;
• the smooth surface of ordinary glass is easily scratched, in addition, if the furniture is handled carelessly, chips can even form on it;
• furniture made of ordinary glass may break;
• Purchased glass furniture is not cheap.

Important. To make a glass table, it is better to choose triplex or tempered glass as the material: this will give the finished product the necessary strength. If it is taken ordinary glass, then it is advisable to strengthen it with a special protective film, which protects the glass surface from mechanical damage, and in case of accidental breaking, from scattering into fragments.

Tools and Fasteners

Before you begin, you need to prepare the necessary tools and fasteners. So, to make a glass table with metal legs in a high-tech style you will need:

In addition to this, the following will also be useful:

• acetone or gasoline;
• vegetable oil for wetting the glass cutter wheel;
• paste for polishing glass surfaces;
• a sheet of chipboard or plywood on which glass will be cut;
• protective gloves and glasses.

How to make a glass tabletop?

The material for making the tabletop should be durable glass. thickness not less than 6 and not more than 12 mm.

When cutting it, you must follow safety precautions and also be able to properly use a glass cutter and other tools.

Important. It should be remembered that cutting glass is a rather traumatic process and in order to avoid injury, it is necessary to work in a specially equipped place for this purpose, having first put on safety glasses and gloves or mittens. It is also advisable, in order to avoid glass dust getting into the respiratory tract, to wear a respirator or at least cover your face with a medical mask.

As a rule, injuries when cutting glass occur due to excessive pressure on the glass cutter. In this case, it may slip along smooth surface, which is fraught not only with serious cuts, but also with irreversible damage to the material.

Moreover, under no circumstances Do not cut glass while hanging or holding it on your lap.

A properly equipped cutting area should be quite large leaf plywood or chipboard laid on a stable surface. Its size should be such that the cut line fits completely on it. To prevent dust particles or other small debris from being pressed onto the work surface with a sheet of glass, it is advisable to cover the plywood with thick fabric or cover it with a piece of old carpet.

Important. Immediately before marking the tabletop, you should wash and dry all the tools and, of course, the glass itself. Wheel roller glass cutter it is necessary to pre-moisten it in oil: this will not only facilitate its movement, but also make the cut line clearer and thinner.

Rules for cutting glass:

• during operation, you should not press as hard as you can on the roller glass cutter: the pressure must correspond to the thickness of the material;
• if it was not possible to cut the glass the first time, then you need to run the roller glass cutter several more times over the same place, and the pressure on the tool should not be strong;
• After the cut is made, you need to tap on front side material with a rubber hammer;
• if there are uneven scraps left on the cut part, they can be removed using the same glass cutter;
• if the tabletop has an uneven edge, then a detail is drawn on paper in life size and is fixed on the glass, after which it is traced along the contour with a glass cutter;
• if a countertop is planned round shape, then in the middle of a piece of glass you need to attach a thread or thin rope with a glass cutter tied to its edge, with the help of which a circle is drawn on the surface of the material. To remove excess evenly without damaging it finished part, from its edge to the edges of a piece of glass, straight lines are drawn like sun rays in children's drawings.

  After which the excess trimmings are carefully removed, one segment at a time. The same principle is used to cut an oval tabletop, with the only difference being that two threads or ropes are required. different lengths, since it will be necessary to cut arcs of two different diameters with a glass cutter.

Important. When working with a diamond glass cutter, you need to remember that, unlike a roller glass cutter, you can only draw a line once, using moderate force.

After the part is cut, it must be polish.

To do this, you need to put a nozzle on the drill with sandpaper glued to it with double-sided tape, and then at low speed (no more than 1700 revolutions) sand the edges of the future tabletop on all sides.

Then, using a felt circle greased with a special paste, placed on the drill attachment instead of sandpaper, the edges of the glass polished also from all sides and at the same speed as when grinding.

The base for the table top is ready, now you can proceed directly to assembling the table.

Manufacturing and assembly

To assemble the finished table:

Important. The glue must be of high quality, specifically designed for fastening glass parts. Cheap glue, when dried, leaves unsightly stains that will be very visible through the tabletop.

How to decorate?

Despite the fact that a glass tabletop looks stylish and elegant even without the use of additional decor, it can be made even more interesting and attractive in appearance. There are many ways to decorate glass and almost all of them are applicable when making a table by hand. The most common of them are:

Glass is one of the few materials that are equally suitable for any interior. Glass gives a certain freedom to space, weightlessness of the structure. Despite their apparent fragility, modern types of glass can reach the strength of metal. If quite recently the presence in the interior glass products meant glass vases, dishes or figurines, but now times have changed: shelves, cabinets, tabletops coffee tables and even dining tables made of glass successfully compete with wood and metal.

What you need to know to make a table with a glass top

Despite the strength modern glass, working with it remains one of the most difficult: shards and scraps of glass of any thickness pose quite a danger to others, and insufficiently processed sections finished product can become a source of very serious injuries and even mutilation. If you decide to make a table with a glass top yourself, you need to first take care of the safety of those who will use it.

The most suitable glass for a tabletop dining table– triplex 10mm thick or hardened 6-12mm: a tabletop made of this material has all the necessary characteristics – it is durable, can withstand shocks, is resistant to other mechanical damage.

The most difficult process in the manufacture of tabletops is cutting glass according to the right sizes and processing of sections. As a rule, when purchasing in specialized stores, the service of cutting glass to the required sizes is provided - in this case, processing the edges of the tabletop will also not be a problem.

Glass combines best with wood and metal (unless, of course, you are planning to make a purely glass table). The combination of metal and glass is more suitable for high-tech style, and wood and glass look organic in interiors of any style.

How to make a glass table durable and reliable

In order to sit calmly at a table with a glass top made by yourself, without fear for your household and for the safety of the table setting, you need to ensure its stability, firmly connect the parts together, securely attach the table top to the tabletop and carefully process its edges, rounding all sharp corners.

Methods for connecting glass to various materials can be different - each of them has its own disadvantages and advantages:

The design of the table can directly depend on the choice of method of fastening the parts: there are many variations on how to make a glass table yourself, and how it should look in your kitchen. We offer several options that you can easily use to make a table with a glass top. However, first let us dwell in more detail on the general technological features manufacturing such tables, which, in the absence of the necessary skills, can cause some difficulties.

Before you start making your own glass table...

Difficulty 1. Selecting glass

If there are many various types glass, differing in color, type, technical specifications and price, you can get a little confused when choosing the right one.

Find optimal combination The price and quality of the selected material will be helped by a preliminary drawing of the future table and safety considerations for its further operation: the more glass in the structure and the greater the load this part of the table will experience, the stronger and thicker the glass should be.

The color and decor of the glass are chosen based on the general style of the room where the table will be located.

In addition, it is necessary to take into account the ratio of the cost of glass, the complexity of the outline of the glass part, as well as your skills in working with glass: when cutting design parts yourself, there is a chance of damaging the canvas if you do not have experience in cutting glass.

Difficulty 2: Cutting glass

Work order:

1. Finished drawing, indicating the dimensions and configuration of the glass part of the table being manufactured - an indispensable condition for starting glass cutting work.
2. The second condition is the presence the necessary tool And auxiliary materials for cutting, as well as making patterns according to which it will be performed.

We will definitely need:

You may also need:

• A hammer with a rubber knob and pliers with rubber pads - use a hammer to tap the cutting line for an even division, and with pliers carefully break off pieces of glass along the line that are still there after cutting;
• A thin rod with a diameter of about 3 mm, which is placed under the cutting line.

If you have never held a glass cutter in your hands, it’s a good idea to first get comfortable with an unusual tool by practicing on unnecessary scraps: learn to control the pressing force (about 2 kg, can be measured on ordinary scales), develop hand steadiness and learn to draw a continuous line without repeated drawings - this the main conditions for the glass to be cut correctly and efficiently.

The procedure for performing glass cutting work:

1. Using a rag soaked in a solution of baking soda, carefully clean the glass from dust and dirt and dry it - the surface intended for cutting should be room temperature, clean and dry.
2. We lay the glass on a flat, clean surface - it is important that the planes touch as tightly as possible, and the near edge of the glass coincides with the edge of the substrate;
3. We outline the cutting lines - apply a ruler or a pre-made stencil; If you use a glass cutter without oil supply, you need to dip the glass cutter roller in oil;
4. The cutting line begins at the far end of the sheet and is carried out in one continuous motion.

Important: the point where the glass cutter begins to move lies 2-3 mm from the opposite edge - you cannot start from a sharp edge. The line ends the other way around - when the glass cutter jumps off the surface being cut!

5. At the end of the line we just drew (exactly at its end point!), place any thin round object between the glass and the substrate - you can use a thin flat screwdriver. By sharply pressing on both sides of the line, we break the newly cut piece of glass - if all the steps were performed correctly, the glass will break exactly along the drawn line, regardless of the complexity of its contour (Fig. 4). If this does not happen, it is necessary to break off small pieces remaining on the cutting line by lightly tapping them with reverse side with a hammer and using pliers or a special slot on the body of the glass cutter.

Processing of slices is done very slowly and carefully, the movements of the tool should be directed along the plane being processed. The tool must be moistened with water or turpentine to prevent overheating of the glass edge:

After making the table top, you can start making the base for our table.

Option 1. Immortal classics - universal style for any interior.

The peculiarity of such a table is the tabletop, as if floating above the base.

The dimensions of the tabletop are 1350x800 mm, the height of the legs is 750 mm, the height of the tabletop holders is 30 mm.

Accordingly, we will need following materials:

• Glass table top 1350x800mm;
• Bars for table legs 50x50x75 mm – 4 pcs;
• Planks made of laminated chipboard (thickness 25mm): 120x600 mm – for the end parts of the underframe, 2 pcs. and 120x1150 mm – for the side parts of the base, also 2 pcs.;
• Chipboard sheet 1150x600 mm – for a false tabletop (if you don’t want to see the knees and shoes of people sitting at the table through the tabletop);
• Furniture corners - about 10 pieces, screws for fastening them;
• Extended confirmations – 8 pcs;
• Fasteners for the tabletop (Fig. 6) – 4 pcs.

The underframe is assembled in accordance with the diagram (Fig. 7).

Moreover, if you decide to make a false countertop, you won’t go wrong: its surface can be decorated by changing color scheme table and even style (for example, by laying a mat with hieroglyphs, or pieces of coral and sea pebbles, or even simply by placing burlap under the glass).

The holders for the tabletop are attached to the upper ends of the legs, the places for attaching the holders are carefully measured on the glass of the tabletop, holes are drilled and the tabletop takes its place.

The tabletop can be fastened in another way, without drilling holes - it is shown in the diagram in Fig. 8, and is also used in the next version of the round table.

• Advantages and disadvantages of glass tables in the interior
• DIY glass table in high-tech style
• Glass table with forged legs

Glass tables, complemented, for example, with forged legs, are very elegant and sophisticated interior elements. However, how to make such a table with your own hands and, in general, is it possible to make it yourself? Answer: yes, it is possible. The following tips will help you make this piece of furniture with your own hands. However, before you get to work, remember that glass is a rather complex material. It must be handled with extreme care. The option “this will do” will not work in the case of a glass table. You will have to give up all your strength to do it for real worthwhile thing for your interior design.

Advantages and disadvantages of glass tables in the interior

In addition to the fact that glass is a “delicate material,” you need to know about its other advantages and disadvantages before starting to do the work yourself. So let's start with the benefits, because they are truly tangible.

1. This is very stylish element interior It will look good in almost any interior style, especially if you combine glass and forged legs.
2. Practicality. Modern glass tables are designed to be truly functional pieces of furniture, rather than simply serving as decoration.
3. Finally, such tables have high level perseverance. They are not afraid high temperatures, nor humidity. Yes, unlike wooden table, a glass table with forged legs can fit perfectly into the kitchen. In addition, it can be washed with any household detergents, which makes the table easy to clean.

The main disadvantage of a glass table made by yourself is that it is very easily soiled. There will always be fingerprints and other traces on it. That's why it will have to be washed very often. However, this disadvantage can be solved by replacing traditional glass with frosted glass of the desired tint.

In addition, if you decide to make a table with your own hands, do not forget about the high cost of materials. This is especially true if you want to combine glass with forged elements.

DIY glass table in high-tech style

The easiest way to make a glass table with your own hands is to use simple metal tubes and glass. The simplicity of this method is that all you need to do is glue all the elements together. You can buy a ready-made sheet of glass or cut the tabletop into any desired shape. Metal tubes can be purchased at a hardware store.

To make this piece of furniture in the currently fashionable high-tech style, you first need to choose the right glue. If you use standard option with mirror glue, when dry it will be visible through the glass surface. Accordingly, this option does not suit us. Yes, and it dries this type glue takes a very long time, which is unacceptable in our case when there are no other types of fasteners.

This is why you should go looking for a special glue. It comes in two types: “glass-metal” and “glass-glass”. They produce such glue as domestic producers, and foreign, Polish and German glass glue is especially valued. Please note that glass glue dries only under the influence of a special construction ultraviolet lamp (a regular medical UV lamp will not work). You can rent such a lamp at a hardware store. Working with her is extremely simple. The glue completely polymerizes under the influence of rays in 30 seconds.

Glass table with forged legs

A combination of glass and refined forged metal can give any interior a touch of grace home comfort. The fact is that openwork weaving powerful metal blends perfectly with the subtle elegance of glass. IN in this case it is better to abandon matte countertops and choose an option with clear glass, because beautiful forged legs should remain visible. In addition, so that a table with forged legs does not get lost in the design, it needs to be complemented with chairs in the same style. Of course, chairs do not have to be entirely made of forging. A couple of forged parts are enough.

In addition to beauty, such a table also has practical advantages. It is very stable, and thanks to its considerable weight, no one will be able to accidentally move it. And besides, forging opens up the widest scope for imagination. Find a good blacksmith and he will recreate any intricate ideas from your sketches.

Return