Reading time ≈ 3 minutes
Just a few decades ago, people en masse sought to settle in apartment building, but today the situation has changed radically. I want to exchange monotonous concrete boxes for a cozy one wooden house IR somewhere away from the hustle and bustle of the city. However, many people do this, even the prospect of periodic repairs does not stop them. After all, the tree, despite modern methods processing, is exposed over time to environment. Thankfully repair wooden house with your own hands it is quite possible to carry out.
Reasons for renovating a wooden house
When starting repair work, it is necessary to identify the cause of the problem. Most often the owners wooden houses are faced with the following problems:
- The crowns of the log house rotted and became unusable.
- Horizontal cracks appeared along the logs.
- The walls of the house, which are under window openings.
If you get to work in the early stages, you can repair a wooden house with your own hands without disassembling, which will be much cheaper and easier.
Wall repair
The most vulnerable point of a wooden house is the crown logs, as well as the floor beams and the floor itself. Damaged logs and beams require replacement, which can be done without disassembly, but the house will need to be raised using jacks. Before lifting, it is necessary to remove the door and window frames. And the lifting itself must be carried out in several stages and gradually. When the house is raised to the desired height, it is necessary to replace the leaky logs with fresh ones. After everything, the house should be lowered.
Repairing cracks along logs
Such cracks are dangerous because moisture, dust, dirt and insects will accumulate in them, which in the near future will lead to the destruction of the log. In order to resolve this problem, we recommend using one of two methods:
- Existing cracks and crevices must be thoroughly cleaned, then treated with an antiseptic and sealed with a special sealant.
- Walls of the house with outside can be sheathed with boards or panels, which will prevent the development of cracks and the appearance of new damage.
But it would be more preferable combined option- first treat and seal the cracks, and then carry out the sheathing.
Sections of walls located under window openings suffer due to moisture ingress from the window drain, which leads to premature rotting. And this can lead to the fact that very quickly the processes of rotting spread to other sections of the walls. Therefore, it is better to start repairing an old wooden one as early as possible, especially since the work to be done here is not very difficult. The part of the log that is rotten must be cut out and replaced with a new one. And in order to secure this new part of the log, it is enough to put them on pre-nailed ridges.
Our article offers photos and videos that will answer questions about how to repair a wooden house with your own hands. By starting repair work in advance, you can avoid unpleasant consequences and premature destruction of a cozy wooden house.
Video of wooden house renovation
Every year, the popularity of suburban housing is steadily growing, which forces a huge number of urban residents with average income to buy old village houses and renovate them themselves. You can easily find photo and video tutorials for renovating a house in the village with your own hands on the Internet. In this article we will try to reflect the main stages. It is worth noting that such a house is not only much cheaper than a new building, but also proper care and reconstruction can last for many decades.
And how to properly renovate a house in a village with your own hands, photos can be easily found on the Internet.
A little history of the construction and operation of wooden houses
Our ancestors always believed that the most suitable place for living is wooden house. This is explained by the fact that the tree is unique natural material, capable of passing air and at the same time excellently retaining heat inside the room itself. In addition, houses built from wood have a unique energy that is preserved long time and has a beneficial effect on human health.
If we return to the question of repairs, then inviting a specialist is a rather expensive undertaking that not every person can afford, which is why you have to take up the tools yourself. It is important to note that if a man has at least basic ability to operate a tool, then, using some tips, it will be enough for him to simply repair an old wooden house on his own.
Unlike a stone or concrete structure, a wooden house is a kind of living organism that can independently tell its owners about its condition. This is done through various creaks and crackles, which you need to learn to listen to. They arise due to the characteristics of wood, which is subject to rotting very sensitive to moisture and temperature fluctuations. However, even a very old wooden building can be repaired yourself.
Most frequent breakdowns such buildings are dilapidated porch, leaky roof, foundation of the house and Entrance door
. That is why, before carrying out any actions, it is necessary to thoroughly check the entire structure, identifying areas requiring repair, and determining the scope of future restoration work.
What is the best way to repair the foundation of a residential wooden building?
The most labor-intensive process of the entire restoration is considered to be foundation repair. If, after a thorough study, it becomes clear that the house requires complete replacement wooden base, then the first thing to do is to raise the corners using a lift. Only after such manipulations are carried out further replacement of not only the foundation itself, but also the entire foundation of the house is carried out. As for the latter, it is better to do it in a classical manner, that is, pour it using concrete.
Major repairs of a wooden roof
A distinctive feature of any wooden house is roof, made at a certain angle. It can be either a hipped roof or a gable roof. In addition, if the roof is additionally equipped with an attic, then it is usually called an attic. All of the above features must be taken into account when carrying out major home renovations.
The first thing you need to pay attention to when roof covering, so this means that the tree must be dry. Otherwise, it will shift after the reconstruction is completed. First of all, the outer rafters are erected, between which intermediate rafters are installed. To ensure that the roof is subsequently as level as possible and incredibly stable, all the upper parts of the rafters are located strictly at the same level.
If we talk about the coating itself, then it is most often used for a wooden house. soft tiles or ondulin, in other words, lightweight roofing. It is mounted directly after installing and securing the rafters special ties. It is also worth noting that between installed rafters the distance should not exceed 60 centimeters.
Choosing a roof for a house in the village.
Regarding the choice soft roof,
then it is produced due to several factors. For example, long service life, aesthetic appearance, ease of installation and low weight. It is the combination of these characteristics that explains this choice. In addition, even one person can handle the installation of this roof, which is also very important when committing self-repair. And the price of such material is acceptable.
Concerning nulaina or ondulina, then these materials, like slate, contain asbestos. It is thanks to the latter, distinctive feature Such a roof is durable and flexible. Also in appearance it is very similar to the already mentioned slate. Officially, manufacturers provide a warranty of more than twenty years, but with proper care and proper installation, such a roof can last about fifty years.
An important element correct installation is preliminary sheathing, which is made of either wood or metal. This is very labor-intensive process, requiring appropriate qualifications and skills, which must be approached with all seriousness and responsibility.
Repair of floors, doors and windows of a house in the village.
Do-it-yourself renovation of a village house and interior decoration, as in the photo, is done gradually and thoughtfully. Its final stage is considered to be the restoration or complete replacement of floors, doors and windows. It is worth noting that replacing these elements is mandatory in almost every old house wooden building. These activities can be carried out independently. To do this, first of all, it is necessary to determine is the box askew? buildings. The level will help you cope with this task. If there are some violations, they are corrected by using a pry bar and a nail puller. After carrying out all the necessary manipulations frames are installed in their original places. If they are completely unusable, then it is best to order new ones. In this case, the craftsmen will come and do everything themselves necessary measurements and windows of the appropriate size will be made from them.
If there is a need to carry out replacing floors, first of all, the floorboards are removed and the condition is checked lag. They are also leveled using a level, brick posts or wooden blocks.
All rotten boards are replaced with new ones, which are previously purchased at any construction market. This is the final stage of construction, requiring a strict approach. Keep in mind that repairing a house in the village with your own hands, photos and videos must be in strict accordance with the technology of work. It is also worth noting that if the house is planned to be used in winter, then before implementing a new flooring it is necessary insulate the floor. To do this, first a rough version is laid using cheap wood, which is carefully treated with an antiseptic, and then left air bag to save heat, and the boards selected for the floor are laid.
Training video
You can determine whether a foundation needs repairs by taking just one look at it. The fact that the days of the foundation of the house are already numbered is indicated by the skew of the building, cracks on the walls and subsidence of the house. It is impossible to insure a building against such deformations, because over time the foundation materials deteriorate. Therefore, one day the time comes when the owners of a wooden house have to decide what type of repair to do - partial or complete.
Conditions for partial and major repairs
In order to find out the extent of damage to the foundation and determine necessary measures to restore it, you need to carefully study Current state foundations and identify characteristic defects that may affect the strength and integrity of the building or its individual elements.
If cracks appear on the foundation, then you need to think about the need to repair it.
The foundation is restored in fragments if it has sunk lower but has not begun to collapse. TO complete renovation resorted to when cracks and other damage are detected.
The decision on what basis to replace a completely damaged structure is made taking into account the type of soil, the terrain and the type of foundation originally created.
If the foundation of the house has sunk into the ground, it’s time to repair it
With a strip base, they often proceed as follows: the destroyed areas are dismantled and the structure is reinforced along the entire perimeter. In case of serious destruction of the foundation strip, it is decided to completely replace it.
For serious defects strip base at home it makes sense to think about replacing it completely
Repair of a columnar foundation is almost always carried out completely: all the old supports of the building are replaced with new ones. To do this, the house is raised to the height of the pillars using jacks. New reliable supports are fixed on reinforced concrete “pillows”.
The columnar foundation is most often completely replaced with a new one
A foundation made of wood, which has already been slightly damaged by fungus, is usually replaced with a strip or columnar structure. To do this, the building is raised to a certain level and placed under it. concrete blocks or bricks.
Strengthening the foundation of a wooden house
When repairing the foundation, it makes sense to immediately strengthen it. This can be done if you are confident in the stability of the soil, which is below the foundation level of your house. Strengthening the structure under the building may also be required in the case where it is planned to add another floor to the house, but there is a suspicion that the previously installed foundation will not withstand the increased load.
You can strengthen the foundation in two ways, depending on the load it has to withstand.
Instructions for strengthening the strip structure
To make the foundation more durable, perform the following work:
- A trench is dug along the perimeter of the base. The hole must be wide, otherwise it will be inconvenient to work. In addition, we must take into account that the new foundation will become stronger.
- The soil is removed from the excavated foundation. To do this, use a metal brush.
The trench must be wide enough to make it comfortable to work in.
- Holes are made in the old base with a drill. It is important that their diameter exceeds the thickness of the purchased reinforcing bars by no more than 1 mm. In this case metal elements will be installed securely and without gaps.
- Reinforcement rods are inserted into the drilled holes using a hammer. They will help connect the new base to the old one.
IN drilled holes the reinforcing bars to which the vertical grille is attached are clogged
- Next metal elements are welded to the clogged rods, forming reinforced belt. It is better to solder the reinforcement with already installed rods only in a few places. For the most part, it is wiser to tie metal elements with wire to avoid deformation of the reinforcing belt during pouring and hardening of concrete.
The reinforcement cage will firmly connect the old foundation with the reinforcing concrete structure
- The formwork is installed and filled with concrete. After waiting for the solution to harden, the structure of the boards is dismantled. The new foundation is left untouched for several days so that it becomes even stronger.
Around reinforcement cage install the formwork and pour concrete into it. After the reinforcing layer has hardened, the formwork is removed
- The created base is covered waterproofing material. An asphalt strip is created around the foundation at an angle.
Thanks to the reinforcement, the weight of a wooden building is distributed over a larger area. This method allows you to stop subsidence and destruction of the house.
Video: how to strengthen a strip foundation
Replacing the foundation under a timber building
The method for replacing the base depends on its type.
Replacement of strip foundation
Overhaul of the base in the form of a tape is carried out in stages:
- In order to reduce pressure on the foundation, furniture is removed from the house, floors are dismantled, and the stove is dismantled. Only heating equipment located on a separate concrete platform is not subject to dismantling.
- The building is raised slightly. If the house is small, then its level in relation to the ground is changed using a kind of lever for lifting weights - a beam measuring 8x8 cm, placed at the corner of the building. A log will serve as a support for it. For heavy construction, it is better to choose thicker lumber. The wooden structure is raised by applying pressure to the timber.
The house is raised on jacks and temporary supports are placed under it.
- Around the home or just in areas where lifting is required wooden building, dig a trench.
- A jack is placed under the old foundation. There may be several mechanisms for raising a building. The number of jacks is determined by their load capacity and the weight of the house. The mechanisms can only be installed in areas where there is no damage.
- Using a jack, the house is slowly raised to the desired level. It is important that it rises evenly above the ground. Since there is a risk of unsuccessful installation of the jack, it is advisable to play it safe - place wooden wedges between the structure and the base pad.
The house is raised evenly on several jacks. For insurance under load-bearing beams wooden blocks are placed
- The lower crown of the raised wooden structure tied together with a steel hoop or hammered with strong boards. This technique will protect the overloaded lower beams of the house from damage.
- The house is freed from its former foundation right down to the surface of the earth. If you are not ready to spend a lot on repairing the base, then you can partially disassemble the structure - remove only the damaged areas.
A hammer drill is used to destroy the old foundation.
- A pillow is made from under the reconstructed base of the house. sand-cement mixture. Supports made of concrete or bricks are placed at the corners of the building. Instead, you can use piles. Thanks to the installation of supports, the size of which must correspond to the height of the foundation being constructed, in the future the foundation will be able to withstand increased pressure.
- Construct a reinforcing belt necessary to strengthen the base. Elements metal structure They are connected not by welding, but by wire.
- Formwork is made from boards. The finished structure is filled with concrete mortar.
Formwork with a reinforcing frame inside is reinforced with side supports and filled with concrete
- After 3 days the concrete hardens, so the formwork is removed, but further work are not carried out yet, waiting for the foundation to be strengthened.
- A few days after dismantling the formwork, the new base is covered with a waterproofing sheet, for example, roofing felt.
A few days after the formwork is removed, the foundation is covered with waterproofing material
- The house is lowered, acting as slowly as during the raising of the building. Front side the bases are covered with waterproofing and facing materials. A blind area is made around the house, which will not allow rainwater to seep into the foundation.
Video: how to repair a strip concrete base
Repair of support pillars
To replace a columnar foundation, proceed as follows:
If it is necessary to replace just a few pillars, they act differently: they make tunnels in the area where they are located, and pipes are immersed in them and filled with concrete. Old supports are dismantled after the solution has hardened.
Video: replacing a columnar foundation with your own hands
Converting a rubble or brick foundation into a monolith
Since the brick foundation is characterized by increased fragility, it is more advisable to replace it with a concrete foundation.
To build in place of a brick or rubble foundation concrete foundation, perform the following actions:
Video: brick foundation repair
Repairing the foundation of a wooden house with your own hands
The wooden foundation is mainly made of pine or larch. A wooden structure always requires complete replacement, since over time it becomes completely covered with fungus and rots. Replacing old elements of such a base with new ones is carried out as follows:
The damaged foundation of a dilapidated wooden house can be put in order. To do this, you need to obtain the necessary knowledge and choose a repair or replacement technology. You can do the reconstruction of the foundation of a house yourself, if you have the desire and at least a little experience in construction work.
New home made of wood, built by hand from scratch - what more could you want? Unfortunately, many can only dream of such an option. Not everyone has this opportunity: quality wood has an appropriate cost, and there are no construction skills.
Buy an old wooden house or country house for many it turns out to be much easier - this is a completely affordable option.
And people often inherit old huts from relatives, often in a very neglected and even uninhabitable condition. Before you start using it, such housing must be put in order. It should be noted that often quite good wood is found under the old coating - although not new, but of quite high quality. They knew how to build before.
Restoration of a village house
First of all, a thorough inspection of the house is necessary. It is advisable to start with it. If you immediately begin directly restoring an old village house, and later it turns out that problems with the foundation of the house interfere with its full use, then the work done will be in vain. If during the inspection serious deficiencies are discovered (partial destruction, collapsed corners, dampness, etc.), then they must be eliminated.
This procedure cannot be carried out without jacks. With these devices, with great care, they are raised to a comfortable height. The foundation itself is corrected, insulated or re-filled - this is how the foundation is restored. Such manipulations are considered quite dangerous, so insurers and observers are needed.
Then old log house returns to its place and begins new stage- its polishing. To do this you will need a special machine equipped with attachments. With its help, it will be possible to treat the most inaccessible areas. Hands and simple sandpaper will clearly not be enough for this manipulation. Sanding is carried out until a layer with a light color appears.
And the machine is universal: changing the attachment elements will allow you to use it not only for grinding, but also for sealing all kinds of defects, cracks and crevices.
Large defects located along the length of the crowns are repaired even before this. They are sealed with a mixture of sawdust: the damaged areas are rubbed with a pre-prepared composition.
Instead of asbestos, you can use wood glue or regular building plaster. But such compositions are suitable for correcting minor defects. If the defects are too large and there are many of them, the log house will need. Otherwise, the inevitable dampness in the cracks will cause damage and rotting of the wood. Wood must be treated with all kinds of protective agents.
Before and after house restoration The procedure is carried out before caulking begins. It is advisable to treat sealing materials with the same materials. All seams between the logs are removed from the dilapidated, crumbling sealant, for which it is convenient to use a regular vacuum cleaner. After all, the old log houses are caulked conscientiously. To replace worn-out tow, a new, modern sealing material is selected.
The final stage of all work carried out– final.
Uninformed citizens are sure that this procedure consists of easy application on wood with a decorative coloring composition. This seems to be the case, but in this case not really.
This means applying different means– tinting, varnish, azure. The listed coatings do not hide the beautiful texture of natural wood.
But if the facade of the house is really old and dilapidated, then it will have to be clad or covered with opaque paint, one way or another.
It is important to remember that the ends of the logs should not be subjected to either protective or decorative treatments. Here there are a kind of capillaries of the tree, with the help of which it “breathes”. The processing process will seal them, normal air circulation will be disrupted, and the log or timber will undergo a rotting process.
As you can see, restoration or reconstruction of a wooden house is not an overly complicated process. It's not like that hard work, besides, she is clearly creative. Here you can give free rein to your imagination and imagination, trying to improve and ennoble your old home. What would seem risky for the decoration of a new house can be safely used for the restoration of an old one.
Ancient buildings: features of restoration
Cases of putting in order houses with high architectural value, or which are ancient monuments, are not uncommon. Sometimes restoration of private merchant houses and mansions is carried out. In such cases, a particularly attentive and thorough approach is required.
What complicates matters is that such a building cannot be decorated with other modern materials. All work is carried out with care, because any negligence can cause irreversible consequences.
Excessive sanding, for example, can thin out or ruin the unique wood grain.
Which specific features characterize the restoration activities of the old house:
- Global restoration old house should be carried out measuredly and consistently. There is no need to rush here. Construction materials and necessary tool must be selected with special care;
- Individual parts and elements, for example, elaborate columns or lace trims, can be ordered from professional craftsmen;
- When restoring a house, it is good to rely on old photos of the house being renovated. Maybe with old owners or in family archive you can find the pictures you need. If desired, the building can be reproduced in its original appearance.
Otherwise, the transformation of an ancient log house is similar to the renovation of an ordinary one. Logs and compaction must also be treated. Perhaps they require even more protective substances than simple dwellings.
Before and after restoration
House restoration price
The cost of restoring a private house consists of various factors. This is both the time of year and the distance of the building from the city limits. After all, if you hire craftsmen for work, then they need to somehow get to the workplace. This is more difficult to do in the cold season.
A significant role in the cost of restoration of a suburban building is played by its size, living space and the degree of neglect.
If the house stood for a long time without residents and without supervision, then the premises inside and external facade could become completely unusable. The craftsmen will have to make a lot of effort to restore the building to its worthy appearance and all the qualities necessary for a home.
The scale of the proposed work also affects the final cost of the restoration.
After all, it is one thing to repair individual elements of a small building, and quite another to overhaul and reconstruct a large two-story dwelling. Of course, minor restoration work will cost much less.
Anyone, even the most quality house, over time loses a fair amount of attractiveness. On its surface may appear various defects, clearly visible to the naked eye. Individual elements buildings wear out and can collapse, ceasing to fulfill their function, and look unsightly.
It is better not to wait for the moment when the home becomes completely unsuitable. Then repairing it will be much more difficult and expensive.
Country wooden house decorates personal plot only if it is well-groomed. Wood is quite capricious, and lack of proper care leads to its premature destruction: cracks, rot and mold appear. Over time, structural elements become unusable as a result of wear and tear and exposure to the environment, and as a result, immediate repairs of a wooden house are required.
Types of repairs
All work on the restoration of a wooden house can be divided into two main groups:
- Current, or redecorating. This is the elimination of external defects and improvement of the internal part of a residential building, as well as the replacement of fragments of parts and structural elements that have lost their appearance and become unusable.
Maintenance log house may be required when rotten or cracked logs appear in its structure. To restore a rotten area, sometimes there is no need to replace the entire log.
The damaged area is sawed out, a piece of “healthy” log slightly larger than the sawn area is selected and processed, then secured with self-tapping screws and nails. The joints are filled with silicone or glue, and metal brackets are attached for reinforcement.
Cosmetic repairs include work such as insulation, sound insulation and leveling interior walls; painting and wallpapering; insulation and floor covering; replacement and reconstruction window frames, doors and ceilings. In progress current repairs do not always cover the entire house. Sometimes selected rooms and premises are restored.
- Major renovation of country wooden houses. These are works related to the restoration, partial or complete replacement of house structures, as well as engineering systems - sewerage, water supply, ventilation, electrical. The exception is load-bearing structures - foundation, roof, facade. In the process of overhauling a building, it is only permissible to replace damaged areas and strengthen them.
The essence of a major overhaul of a wooden house is its modernization, strengthening, improvement appearance and operational characteristics, in increasing its service life. Individual structural elements are replaced with more high-tech, strong, durable elements.
During the overhaul process, standard redevelopment, if permission has been obtained from the relevant authorities; work is carried out, starting from the restoration of those that have fallen into disrepair structural elements and systems, ending with the external and internal finishing of the building.
Most often, major repairs are carried out on dilapidated wooden houses that have stood for decades and were built according to outdated standards. construction technologies. Relatively new homes tend to undergo less expensive ongoing repairs.
Major repairs of an old house are carried out by professionals on the basis that major renovation work include drawing up estimates, performing accurate measurements and calculations, purchasing building materials, and in some cases, the use of special machinery and equipment.
- Reconstruction. Reconstruction includes work related to changing the current parameters of a wooden structure. These include the completion of a house - the construction of extensions, additional floors, balconies, verandas, terraces, and other methods of expansion usable space. As a result, parameters such as height, area and volume of a wooden structure change. Also, during reconstruction, if necessary, restoration is carried out load-bearing structures and their partial replacement, with the exception of some elements.
Before planning reconstruction and major repairs, an assessment of construction conditions is made, measurements are taken, calculations are made, a project is drawn up that would make it possible to understand that the comprehensive restoration and reconstruction of a wooden house will cost no more than the construction of a new building. If their implementation is appropriate in terms of cost, time and labor costs, a step-by-step plan works
Wooden house renovation: where to start
First, structures are restored and strengthened and engineering systems at home, if necessary; and only then cosmetic repairs to the house are carried out. Otherwise, the effort and budget invested in external and interior decoration buildings with damaged structural elements will be wasted.
Before repairs are carried out, the house is inspected for existing defects and their severity is assessed. Inspecting a wooden structure begins with the foundation, since this is the basis of the foundations. Often the causes of wall defects, window bevels and doorways associated with its damage. It is quite difficult for a beginner to draw a parallel between damage to structural elements, identify the sequence and diagnose the cause of their occurrence. Therefore, it is best to invite a specialist to assess the condition of a wooden structure.
After the foundation, the walls and roof are inspected step by step. Experience in inspecting these elements is also desirable. An experienced person will correctly assess the extent of the damage, estimate the cost of repairing a wooden house, and point out the most significant defects. This will allow the owner of the building to further save on time, construction materials and the services of repair teams.
Repair of the foundation of a wooden house
This is one of the most difficult and lengthy processes. Repairing, restoring and strengthening the foundation is more expensive than repairing the roof or facade. Special equipment is often required to prepare and carry out work. It takes time to replace damaged foundation elements of a wooden structure and strengthen the foundation.
Before replacing foundation elements, the house is cleared of unnecessary things. Often it is necessary to dismantle floors. The structure is raised using supports or jacks on both sides to a certain height and fixed, and then necessary work to eliminate damaged parts of the foundation and install new ones. The house is lowered only after the renewed foundation hardens.
Repair of crowns in a wooden house
The crowns of a log structure rot over time and require complete or partial replacement. The most difficult thing to repair lower crown or go through all the crowns, since most often this requires lifting a wooden structure and doing hard work.
There are other ways to reconstruct crowns that eliminate raising the structure. The choice of repair method depends on the intensity of use of the house, its weight, type of foundation and the severity of the damage. Sometimes during the reconstruction process the crowns are replaced brick plinth. The possibility of carrying out certain works is assessed individually.
Repair of the facade of a wooden house
The types and sequence of work depend on the type of facade. Repair includes preparatory work, such as cleaning the walls of a wooden structure and drying them. To strengthen the facade, corrugated sheeting is used. Siding is often used for finishing and fake diamond. These works not only increase the strength of the facade, but also improve its appearance.
Roof repair in a wooden building
The process of replacing a roof involves not only the dismantling of the old covering and the installation of new material. Sometimes complete or partial replacement of load-bearing structural elements is necessary. In addition, insulation and sound insulation may be required. attic space, if there is one in the house. Material for new roof is selected depending on the shape of the roof, its purpose and intensity of use.
Carrying out major repairs of a wooden house on your own is not only difficult, but also dangerous, and preparation for repairs requires professionalism. For qualified advice on the issue of comprehensive overhaul of buildings, you can contact the Moskomplekt company. Our knowledge in the field of construction will allow you to significantly save money, carry out safe, reliable, timely and high-quality repairs Houses.
Our specialists are ready to carry out individual and complex works any complexity related to major repairs and reconstruction of a wooden house, with guarantees for timely and high-quality execution order.
Prices for renovation work on the outside of the house
| Name of works | units change | price, rub. |
Roof repair | ||
| Removal of old roofing and sheathing | m2 | 300 |
| Construction of the rafter system | m2 | 350 |
| Step lathing device | m2 | 300 |
| Continuous sheathing device | m2 | 350 |
| Roof installation | m2 | from 380 |
| Installation of roof windows | PC. | from 3000 |
| Construction of a vapor barrier layer | m2 | 60 |
Facade decoration of a block house | ||
| Installation of block house panels | m2 | from 420 |
| Sheathing device | m2 | from 190 |
| Counter-lattice device | m2 | 100 |
| Installation of a steam/wind barrier | m2 | 60 |
| m2 | 120 | |
| Installation of internal/external fillets | linear meters | from 80 |
| Treatment with antiseptic impregnations | m2 | 50 |
| Application decorative impregnation, paint and varnish materials(1 layer) | m2 | 70 |
Facade finishing with siding | ||
| Installation of siding panels | m2 | from 260 |
| Installation plinth panels siding | m2 | from 320 |
| Installation of sheathing (wood, metal profile) | m2 | from 190 |
| Installation of counter-lattice | m2 | 100 |
| Installation of steam/waterproofing layer | m2 | 60 |
| Installation of insulating layer | m2 | 120 |
| Installation of internal/external corners | linear meters | from 80 |
Facade finishing with facing bricks | ||
| Hydrophobization of facing bricks | m2 | 110 |
| Insulation of PPS/PSB-S/EPPS boards | m2 | 380 |
| Insulation with mineral wool (including gluing, dubilization) | m2 | 410 |
| Finishing with facing bricks | m2 | from 1350 |
Facade finishing with thermal panels | ||
| Installation of thermal panels | m2 | from 750 |
| Installation of corner elements | linear meters | from 320 |
| Installation of frame sheathing | m2 | from 190 |
| Installation of end strips | linear meters | 280 |
| Joining seams | m2 | 320 |
| Preparing the base | m2 | from 450 |
Facade decorative finishing | ||
| Finishing with decorative plaster "bark beetle" | m2 | 360 |
| Natural travertine finish | m2 | from 1000 |
| Painting decorative plaster(single layer) | m2 | 160 |
| Preparing the base for decorative finishing | m2 | from 300 |
| Gluing, dowel fastening of polystyrene foam boards, mineral wool | m2 | 360 |
| Reinforcement with mesh and two-layer adhesive solution | m2 | 230 |
Other works | ||
| Finishing slopes with facade decor | linear meters | from 350 |
| Finishing slopes with clinker tiles | linear meters | 750 |
| Framing window and door openings with plastic slopes | linear meters | from 250 |
| Waterproofing of the foundation, basement | m2 | 430 |
| Installation of sheathing for soffit | linear meters | 100 |
| Covering the soffit (roof slope) | linear meters | from 300 |
| Installation of ebb tides | linear meters | 250 |
| Installation of a drainage system (gutter, pipe, outlet) | linear meters | from 300 |
| Metal door installation | PC. | from 3800 |
| Window block installation | PC. | 3400 |
| Installation of window metal bars | PC. | 3200 |
| Installation of roller shutters | PC. | 4000 |
| Shutter installation | PC. | 3500 |
Prices for renovation work on the interior of the house
| Name of works | unit. | price, rub. |
Walls | ||
| Caulking of walls made of rounded logs, timber | linear meters | 100 |
| Finishing seams with decorative rope | linear meters | 50 |
| Sanding walls made of rounded logs, timber | m2 | 350 |
| Impregnation of walls protective composition(1 layer) | m2 | 60 |
| Apply paint composition(1 layer) | m2 | 80 |
| Installation of a waterproofing layer | m2 | 50 |
| Laying a heat/sound insulating layer (wall) | m2 | from 60 |
| Wall decoration with clapboards and lathing | m2 | 450 |
| Wall finishing with a block house, imitation timber with sheathing | m2 | 550 |
| Installation of skirting boards | linear meters | 40 |
| Cashing of window and door openings | linear meters | 80 |
| Construction of a frame partition | m2 | 450 |
| Plasterboard cladding with frame sheathing | m2 | from 600 |
| Wall covering ceramic tiles | m2 | from 900 |
| Installation of a decorative border | linear meters | 350 |
| linear meters | 550 | |
Ceiling | ||
| Antiseptic impregnation | m2 | 90 |
| Aligning the rafters | m2 | 200 |
| Insulation of the ceiling structure | m2 | from 70 |
| Hydro/vapor barrier device | m2 | 70 |
| Frame structure for cladding | m2 | 200 |
| Finishing wooden clapboard, imitation timber | m2 | 400 |
| Installation wooden plinth, layouts, platbands | linear meters | 90 |
| Painting the ceiling | m2 | from 150 |
Floor | ||
| Installation of adjustable wooden logs, load-bearing beams | m2 | 150 |
| Installation of subfloor | m2 | 250 |
| Preparation of the subfloor (installation of plywood) | m2 | 200 |
| Construction of a finished floor made of tongue and groove boards | m2 | 400 |
| Installation parquet board on the logs | m2 | 580 |
| Carpet flooring | m2 | from 200 |
| Linoleum flooring | m2 | from 200 |
| Flooring piece parquet(depending on method) | m2 | from 1000 |
| Laminated board covering | m2 | 250 |
| Sanding, floor sanding | m2 | 280 |
| Installation of interfloor stairs | PC. | from 4000 |
| Varnishing with intermediate sanding | m2 | from 230 |
| Installation of prefabricated floor bases (“dry floor”) | m2 | from 350 |
| Covering the base floor with ceramic tiles, porcelain stoneware | m2 | from 960 |
| Construction and installation of decorative thresholds | linear meters | 550 |
Electric installation work | ||
| Electrical installation work from scratch | m2 | from 800 |
| Electrical wiring (depending on cross-section) | linear meters | from 35 |
| Low current cable layout | linear meters | 40 |
| Installation of electrical panels | PC. | from 1400 |
| Installation of circuit breakers (depending on the number of poles) | PC. | from 200 |
| RCD installation | PC. | from 350 |
| Installation of an electricity meter | PC. | from 990 |
Plumbing work | ||
| Installation of water supply and heating pipes | linear meters | from 200 |
| Sewer pipe installation | linear meters | from 180 |
| Installation of a heating point | dot | from 2000 |
| Installation of coarse/fine filter | PC. | from 450 |
| Bathtub installation including trim | PC. | from 2800 |
| Installation of a shower cabin | PC. | from 4000 |
| Installation of bidet installation system, wall-mounted toilet | PC. | from 3400 |
| Installation of a floor-mounted toilet kit with a barrel (with assembly) | PC. | from 1500 |
| Installation of a floor bidet | PC. | from 1300 |
| Installation of a heated towel rail with liner | PC. | from 3500 |