Kitchen furniture is exposed to temperature changes, high humidity, mechanical loads, household chemicals and other active reagents. Confront these negative influences and the material used must ensure a long service life.
Most in demand in the manufacture of facades for kitchen furniture MDF and chipboard. They have some similarities, but differ in composition, production technology, and performance characteristics. To determine which of these materials is best suited for the kitchen, you need to consider the features of each.
What is chipboard?
It is a type of chipboard (chipboard) coated with a special film. Protective layer increases the strength and decorative qualities of the material. The process of manufacturing laminated chipboards is inextricably linked with the production technology of the latter.
Chipboards are produced by pressing shavings and sawdust impregnated with formaldehyde resins. There are products of class E1 and E2. The formaldehyde content in the former is reduced to a minimum. The attractiveness of the second lies in its low cost, but it is not suitable for residential premises.
Moisture-resistant chipboard
Kitchen furniture is made from moisture-resistant material. It is obtained by adding molten paraffin or its emulsion to shavings and sawdust. The top film is made from paper impregnated with melamine resin. It is attached to the slabs in two ways:
- 1. Caching
It consists of gluing the film to the plate. After some time, the coating most often begins to peel off along the edges and corners of the product.
- 2. Lamination
The film is fixed to the base under the influence of temperature and pressure. It is more durable, reliable, but also expensive.
Advantages of laminated chipboard
The material is distinguished by increased resistance to harsh operating conditions that are typical for the kitchen. It tolerates humidity, mechanical stress, and high temperatures well.
The top layer of material - film, as a rule, imitates various types of wood, including valuable ones. This allows you to achieve original color and texture solutions.
Has a low cost. A set of kitchen furniture made from laminated chipboard will cost much less than a set of MDF. The price depends on the thickness of the slabs, which varies between 8–25 millimeters, and the decor.
Disadvantages of laminated chipboard
The material has increased rigidity. This provides resistance to mechanical damage, but makes processing difficult. The inability to mill the surface significantly limits the range of products made from laminated chipboards.
Main minus laminated chipboard It is not the hardness, but the presence of formaldehyde in its composition. These substances are toxic and are released into the environment during the operation of the material. The risk can be minimized by choosing furniture made from E1 class boards.
Chipboard furniture for the kitchen
Sets with laminated chipboard facades have a beautiful appearance. They can be made to suit any tree species. There are no restrictions in the choice of shades. Range ready-made solutions or performed by individual order allows you to choose a set for both classic and modern interiors.
Laminated boards have found wide application not only in production furniture facades, but also work surfaces for the kitchen. Additional protection The countertops are covered with high-pressure plastic (HPL). Particular attention is paid to the seams. If they are of poor quality, moisture will begin to seep into the sawdust and the tabletop will become deformed.
Care of laminated chipboard
Cannot be used chemically active agents, which include liquids and cleaners containing abrasive substances. It is recommended to clean the surface with a regular soap solution. To add shine to furniture facades, it is permissible to use plastic polish.
To maintain the cleanliness of the product, cleaning is carried out at least once every two weeks. It is imperative to ensure that there is no accumulation of moisture on the seams. After cleaning the surface, wipe it dry with a napkin or a rag that absorbs moisture well.
What is MDF?
Fiberboard, or MDF, is made from dried, shredded wood chips. Paraffin and lignin are added to it. The small size of sawdust used in production gives the material and products made from it high strength, resistance to moisture and fire.
Advantages of MDF
The material is easy to process. Milling allows you to give slab products a relief and patterned surface. It does not swell under the influence of moisture, does not deform when high temperatures ah, fireproof.
The characteristics of MDF are closest to wood, and the cost is much lower. The ratio of strength and thickness of the slabs (from 4 to 22 mm) is perfectly balanced.
The variety of special effects and coatings used, an unlimited choice of colors open up ample opportunities in the production of original and beautiful furniture items.
Disadvantages of MDF
The material is practically free of flaws. However, when choosing coated slabs, you should pay attention to the quality of processing. If it is carried out at a low level, at temperatures above 75 degrees, the coating may begin to peel off.
Another disadvantage is the cost. Products made from MDF will cost less than solid wood, but more expensive than those made from laminated chipboard. The factor of underdeveloped production in the country also has an important influence on price formation. The high price is easily compensated by the positive qualities of the material.
MDF with enamel coating
The surface of the slabs is primed, painted, dried, sanded, and covered with several layers of enamel. The result is fixed with varnish. The dried slabs are polished again. Material obtained in this way finishing, features a highly decorative appearance and rich shades.
The disadvantages of MDF with enamel include its high cost. Products made from it cost more expensive than furniture with film or plastic facades. The coating is not the most practical. Depending on the color, dust and fingerprints are visible on its surface, and the shade loses its brightness over time under the influence of the sun.
Kitchen furniture made of MDF
MDF facades are elegant, durable, reliable and safe. The latter is especially important for a room such as a kitchen. The carved surface, cornices, panels, pilasters can make them indistinguishable from expensive solid wood. Products made from MDF, as a rule, are presented not in the budget category, but in the elite category.
Like laminated chipboard, this tile material is used not only in the production of facades. It is widely used in surface finishing. Floor, ceiling and Wall panels MDF decorates both residential and commercial premises.
MDF care
The use of chlorine-containing and abrasive products, hard devices, for example, sponges made of metal fiber or plastic material, scrapers, hard brushes and others is prohibited.
Glossy surfaces are best cleaned with a special polish. Otherwise, regardless of the type of coating on the stove, caring for it comes down to using any soap-based cleaners or detergents. It can be ordinary soft soap, which is dissolved in water.
Is there an alternative?
Manufacturers of kitchen furniture offer sets with another façade option. It's called frame. Only the frame is made of MDF, which is covered with veneer or PVC film on top. Profile is complete various materials. These are glass, metal and chipboard.
The advantage of a frame facade is the very low price and unlimited possibilities in creating kitchen furniture design options. The cheapness of the product is overshadowed by the difficulty of care and fragility. Often the frames have a rather weak connection and quickly become loose.
What to choose for the kitchen - MDF or chipboard?
All quality and performance characteristics speak in favor of MDF. It is safe for humans, durable, has an attractive appearance, and makes it possible to give the kitchen a unique look. This material embodies practicality and quality, but will also cost a decent amount.
laminated chipboard will become perfect choice in the case when buying expensive furniture for the kitchen is not a priority for the near future. The main thing when making a purchase is to make sure that the facades are made on the basis of chipboard with a minimum content of formaldehyde.
IN furniture production The most popular materials are MDF and chipboard. Their characteristics are largely similar, but there are some differences. It is not surprising that many people, when purchasing these materials, think about how chipboard differs from MDF and which is better. To answer this question, you need to understand in more detail the qualities and production method of each of these materials.
Manufacturing Features
MDF is an abbreviation that refers to the finely divided fraction of wood. This material is made from fine sawdust (almost usually logging waste. The raw materials are crushed, treated with steam, thoroughly dried and glued together. SoHow is MDF different from chipboard?
Chipboard is a chipboard, for the production of which sawdust of different fractions is used. They are mixed with synthetic or and pressed at high temperatures. A large number of resins negatively affects the environmental friendliness of the material. The advantage is that it is close to the density of natural solid wood.
How does MDF differ from chipboard in appearance?
Many believe that these two building materials are similar not only in production, but also in appearance. This is wrong.
The fine wood fraction has the following characteristics:
the surface of the slab is even and smooth;
When studying the section, one can note the homogeneity and fine-grained structure of the material.
It also has pronounced characteristics:
the surface is uneven, slightly rough;
at the cut site you can see pieces of shavings and looseness of the material.
Differences in use in furniture production
For those who intend to use these materials to assemble cabinets, beds or decorative elements interior, it will be useful to knowWhat is the difference between MDF and chipboard in furniture?
The finely dispersed fraction is easy to cut and process. The screws can be screwed in without much difficulty. Ideal when needed figure cutting— the cut is perfectly smooth and neat. At the same time, the material is heavy and has different colour on both sides (one side is white).
Chipboard is more capricious in processing. The cuts often turn out sloppy and “torn”. When screwing in screws, chips and cracks may appear. The advantage is that the weight of the material is light and the sides are the same color.
Furniture makers are also familiar with another material - laminated chipboard. This board is essentially the same as chipboard, only slightly improved. The surface of the slabs is covered with a special facing film. This covering is made from paper and melamine resin.
The film is literally pressed into the surface of the plate and gives finished products increased strength and protection from moisture. The only drawback of this material is its high cost.
How to choose correctly
Based on the characteristics of all mentioned building materials, one might reasonably ask:how MDF differs from chipboard,and for what purposes it is worth buying each material.
The finely dispersed fraction of wood is suitable for the manufacture of:
interior door leaves, platbands and boxes;
decorative overlays on entrance doors and platbands;
interior partitions;
cabinet furniture (even for rooms with a high level of importance).
The particle board will become great solution For:
assembling cabinet furniture;
finishing works;
interior partitions;
floors
At the same time, vulnerability to high humidity is considered a significant drawback. Laminated chipboard can cope with this task.
So, the difference in the materials used and production methods affects the performance characteristics of the slabs. That is why the same product, made of chipboard and finely dispersed fraction, will look different and require special care. When choosing a particular material for a specific purpose, you need to take into account everythinghow MDF differs from chipboard: weight, processing method, interaction with moisture.
The material used to make kitchen furniture is a guarantee of its high-quality execution and long-term use. In the process of choosing a material, questions often arise: which one is better to order? What to choose: MDF or chipboard? What is the best way to treat the surface: plastic, film or enamel? Today, manufacturers offer all kinds of kitchen design options, and to choose from suitable option you need to carefully weigh all the advantages and disadvantages of each.
Pros and cons of MDF
MDF (fine fraction) is wood dust boards pressed on an adhesive base. This material is very practical and, at the same time, inexpensive. Painted MDF is much more expensive, but its price corresponds to the quality. The process of applying paint occurs in several layers, which are varnished at the end of the process.
The customer can model the desired type of kitchen furniture, its shape and resolve the issue color preference. MDF provides the opportunity to give furniture oval shapes, make sharp corners more rounded, thanks to various technologies. If you choose the painted MDF option, you can use any shade from a wide range of colors to personalize and brighten your kitchen furniture. A good option would be color synthesis.
There are several types of MDF. The painted material is distinguished by its durability. It is resistant to any external damage: excessive humidity, a large number dirt, scratches. Frame MDF visually creates the appearance of use various types wood. MDF with PVC elements will perfectly protect kitchen furniture from moisture and high temperatures.
- regular MDF will be great budget option;
- huge range of colors;
- relatively moisture-resistant material;
- any preferences in choosing a form are possible;
- the process of washing and wiping the surface occurs without problems;
- various coating options: varnish, matte, laminated, plastic;
- Perfect for long-term use.
- painted MDF is quite expensive;
- Any dirt or abrasions easily remain on the surface of this material;
- it quickly deteriorates from contact with high temperatures if covered with a film.
MDF has become a real breakthrough in the market facade materials. It is ideal for making kitchen furniture. MDF is an analogue of real wood, so you should not use dense materials to cover it. The most popular methods for finishing the surface of this material are PVC films and enamel.
Advice. In order for the MDF facade to serve for a long time, it is better to cover it with plastic.
Advantages of laminated chipboard
Chipboard - chipboard, replaced facades made of ordinary wood. This material has become a budget option for making kitchen furniture.
The basis of the material is dried shavings, pressed together with synthetic resins. For a better appearance, the chipboard is varnished and the surface is coated additional material, which hides the unevenness remaining after grinding.
Laminated chipboard is the cheapest option for making a facade. But, unfortunately, of poor quality. A kitchen facade made of this material will look cheap and unattractive. Laminated chipboard cannot be adjusted to fit the required form, since it is not flexible. It can only be used to make simple designs, which can hardly be called fashionable and easy to use.
Attention! LDPS must be covered with additional material. This will help hide unevenness and make the surface of the kitchen furniture usable.
Advantages:
- very cheap material;
- can be used as a temporary option.
Flaws:
- low quality;
- must be covered with additional material;
- simple and unattractive appearance;
- low heat and moisture resistance;
- requires constant care.
The main positive quality of laminated chipboard is its low cost. This material cannot be the best option for the production of fashionable kitchen furniture. Moreover, it does not meet all standards kitchen equipment. But LDPS will be an ideal temporary option for kitchen facade or a new thing for a rented apartment.
Advantages of plastic
Unlike MDF and laminated chipboard, plastic is not the basis for the manufacture of kitchen furniture, but its decorative coating. This The best way preserve the appearance of the facade. Thanks to this additional coating, kitchen furniture will last much longer and retain its appearance. Care plastic surface does not present any difficulties: it is easy to clean detergents, without absorbing them, it is easily wiped off from dirt.
Since plastic is only a coating, a base is used to make the kitchen facade. Such a basis can be a budget option - chipboard or a more expensive one - MDF. During processing of the base material, plastic is glued to its surface.
The plastic is based on plain paper, which allows you to connect different color schemes, drawings, and create a unique product for further use. Color design will favorably emphasize the appearance of kitchen furniture and make it more visually attractive.
Advantages:
- durable to use;
- heat resistant;
- moisture-resistant material;
- large selection of colors and patterns;
- easy to clean, does not absorb heavy dirt;
- does not fade in the sun.
Thus, plastic will become the best material additional coverage. It is perfect for a long period of use and will be well preserved. Cleaning kitchen surfaces will become even easier, since the plastic is easy to wipe off and does not come into contact with detergents.
What material is better to use?
The answer to this question depends on several factors.
Firstly, the price characteristic. If kitchen furniture should become a regular budget option, you should use laminated chipboard. MDF is a much better option, but accordingly it costs more. It resembles natural wood and is of higher quality.
Secondly, surface treatment. Chipboard is initially treated with varnish, but the coating must be finished with plastic. With the help of finishing material, the top ball of the kitchen facade will become smooth and suitable for use. The surface of MDF can be treated with enamel or PVC film. This will improve the appearance of the facade and make it smoother. In order to extend the life of the facade, it is better to treat it with additional material – plastic.
Thirdly, the shelf life. If kitchen furniture is made for a long period, you should spare no expense and choose MDF. Laminated chipboard is perfect only as a temporary option.
Fourthly, design. If the kitchen furniture is planned to be made in fashionable style with round corners and additional features designs - the only option would be MDF.
Find suitable material for the manufacture of kitchen furniture is very difficult. It all depends on the price characteristics, duration of operation, appearance and design. The market offers a wide selection of raw materials for kitchen facades, but the best option would be MDF with plastic coated. It includes everything necessary qualities for the production of perfect kitchen furniture.
Furniture facades: video
Material for kitchen furniture: photo
Let's find out which of these materials is more reliable, stronger and safer.
Photo: www.elvis-mebel.ru
“Sometimes a variety of goods is bad...” sighs visitors to a hardware store, who have to choose between similar board materials such as MDF, chipboard and laminated chipboard. At the same time, it is completely unclear to a non-professional which of the above can be used in a particular case. But figuring it out is not as difficult as it seems.
MDF (short for Medium Density Fiberboard) is a type of fiberboard that has average density And created in a way dry pressing (at a certain high pressure and temperature) of fine wood chips. It is clear that how many in this case Do not heat or squeeze the raw material; the chips will not stick to each other. Therefore, a “binder” (something like glue) is added to them - urea resins modified by melamine.
MDF production technology was developed in the USA in the 60s of the twentieth century, and it was started there in 1966 industrial production. In Russia, the first MDFs were produced only in 1997.
Chipboard - chipboard (usually referred to as chipboard, although it is correct to use the abbreviation DSTP) - is obtained by hot pressing of chips (and other wood particles) mixed with a non-mineral binder. In this case, chipboard can consist of either one layer or several layers (three or more).
Chipboard has been produced in the USA for more than 70 years, in Russia - somewhat less.
Photo: www.makuha.ru
LDSP is a type of chipboard, which is a board laminated with melamine films. The unity of the design is achieved by simultaneous exposure to high temperature and pressure. The surface of laminated chipboard can be made either smooth or embossed (imitating the structure of wood or any other materials).
Safety
The production technology of board materials implies that MDF contains less harmful substances than chipboard. We are talking about volatile substances released by resins (used as binders), harmful to humans, which gradually (during long-term operation) “evaporate” and accumulate in the air if there is no adequate ventilation premises. All these substances do not cause immediate damage to the human body and have harmful effects only with prolonged contact with them (in other words, if you decide to lie on a chipboard or MDF board for a long enough time, you will die not from poisoning with the substances they secrete, but from thirst, hunger or old age).
However, manufacturers still established a certain gradation:
MDF - with strict adherence to technology and high-quality cladding of the surfaces of structures made from it is considered the least dangerous in terms of the release of harmful substances into ambient air. IN MDF production The main binder is lignin, released during the heating of wood. Therefore, high-quality MDF is environmentally friendly;
Chipboard class E1 - ranks second in terms of safety for the human body (but also only with appropriate surface cladding);
Class E2 chipboard - emits the largest amount of harmful substances, is prohibited for production in foreign countries, and in Russia - prohibited for the production of furniture and products used inside public and residential premises (GOST 10632-2007).
The difficulty of determining the harm actually caused by these materials is that the information recorded in the certificates is not always true (and sometimes the certificates attached to the materials are not “original” ones, that is, compiled based on the results of tests, but “purchased ones”). In addition, not all manufacturers (especially Russian ones) comply with the recommended process technology for MDF manufacturing and chipboard, trying to save money by using lower quality resins.
Price
The simpler the production and the more accessible the raw materials, the cheaper the material will be. Since the main raw material for the production of MDF and chipboard is waste from the woodworking industry, the difference in price will be influenced by the following factors:
Production technology (MDF is more expensive than chipboard),
- country of origin (board materials from foreign European companies will cost more than their Russian counterparts),
- the number of intermediaries between the manufacturing company and the buyer (the more there are, the more expensive the material will end up being),
- the presence of additional properties imparted to the materials during the production process (fire resistance, biostability, water resistance),
- availability, quality and durability decorative covering on MDF or chipboard (everything that makes a structure made from these materials more safe and durable costs more).
Which is better: MDF, chipboard or chipboard?
Photo: gklesprom.ru
Unfortunately, this question cannot be answered unambiguously, since MDF and chipboard have their own main purposes, in which their use is considered quite safe for humans.
Thus, MDF and chipboard (chipboard) of class E1 (with mandatory surface cladding) can be used in the production of furniture. In this case, special attention should be paid to the quality of the edges and seams between them and the face (surface of the slab). If the seams are not made well enough, water will get into them over time (for example, when wet cleaning premises) and MDF (like chipboard) will “swell”. At the same time, chipboard is much less moisture resistant.
But MDF reacts more strongly to high temperatures. Furniture made from MDF should not be placed too close to heating devices - it may warp.
MDF is a harder material; it does not crumble when milled - this allows you to make cutouts for fittings, create drawings and carvings on the surface. Unlike chipboard, MDF holds screws and other fasteners well.
But even if all the furniture elements are made with high quality, we should not forget that MDF and chipboard are mass-produced materials, which to one degree or another (according to different characteristics) are inferior to furniture made from properly dried and treated wood. In other words, even the most best furniture made of slab materials will not last more than 10-25 years (depending on the quality starting materials and careful handling during operation).
You also need to take into account that often in the production of furniture only facades are made from MDF, and walls and internal parts are made from chipboard. Furniture made entirely from MDF is quite expensive.
Another variant using MDF- these are made from it door elements in factory conditions. However, when adjusting parts at the installation site, you should pay attention to some nuances. So, when trimmed to size, MDF trims on one side are “unprotected” from moisture, which can lead to their deformation.
But chipboard will be simply irreplaceable as a subfloor (since in this case the material does not have direct contact with the indoor air and, therefore, will not be able to release harmful substances into it). To be on the safe side, you can coat the chipboard with a protective paint coating.
A wide range of materials are used in modern furniture production. The most common ones are laminated chipboard and MDF. Both types belong to fibreboards, that is, they are made from wood waste, but they differ significantly in their performance characteristics and properties, although their production technologies have some similarities.
Laminated chipboard - what is it?
Chipboard (chipboard) is compressed wood sawdust and shavings; formaldehyde resins are used as an impregnation and binding composition. The slab has a heterogeneous structure; the density, depending on the grade, is 300–600 kg/m3. For the production of furniture, types with high performance are used. More loose varieties are used for technical purposes or as packaging material.
Next, the chipboard board is laminated - covered with a layer of melamine film under high pressure. The result is ready for use in furniture production laminated chipboard material(laminated chipboard).
The coating performs several functions:
- prevents the release of formaldehyde, which is quite harmful to the human body;
- protects the stove from external influences, moisture ingress;
- gives the slab an attractive appearance - for manufacturing furniture laminated chipboard Laminating films of various colors, decors and textures are used.
Exists international classification environmental safety Chipboard. High quality material used in the manufacture of household furniture must comply with class E1. When purchasing, check with the seller and ask to see certificates. Products of class E2 are completely prohibited in Europe and have significant restrictions on use in Russia.
MDF - what is it?
Decoding the abbreviation MDF (fine fraction) says a lot about the raw materials for making this tile material. At first wood waste crushed to a homogeneous fine fraction, dried and compressed. Main binder lignite is a natural substance found in wood. Formaldehyde is used in the production of MDF in small quantities, and additional processing details completely prevents them from being highlighted.
The result is a material with a homogeneous and high density(600 – 800 kg/m3), smooth and even surface, free of harmful chemical substances. As a protective and finishing layer on MDF, in contrast to chipboard, a variety of materials are applied: PVC film, wood veneer, enamel, plastic, etc.
What is the difference between laminated chipboard and MDF?
Each of the materials has found its application in furniture production due to its structural features and performance characteristics. Comparing the main indicators will help you understand the difference between MDF and laminated chipboard and make the right choice.
High strength is one of the main properties that must be possessed furniture materials. Dense MDF board is much stronger than chipboard and even solid wood. Products made from chipboard are also quite resistant to mechanical loads that may arise when furniture is used in living conditions. Basics weakness parts made of chipboard - attachment points for hinges and fittings: due to the loose structure, gradual destruction of the material is possible.
Resistance to moisture and steam is especially important when choosing furniture for the kitchen or bathroom. Chipboard parts behave well in rooms with normal or slightly increased (in the kitchen) humidity, provided high-quality processing cuts and joints. Through unprotected or damaged surfaces, moisture easily penetrates into the chipboard, which leads to swelling, disruption of geometry and destruction of elements. MDF parts are much more resistant to high humidity and can even survive a flood.
When choosing materials for furniture, technological capabilities are important. On dense slab MDF can be deeply milled and patterned, which provides unlimited design space in the production of furniture facades and decorative elements. Laminated chipboard does not provide such opportunities - a loose surface cannot be properly processed milling machine. MDF bends quite easily - this allows you to make parts with streamlined shapes. Only straight furniture elements are produced from laminated chipboard.
In terms of environmental friendliness, MDF is close to natural wood; the absence of harmful substances allows this material to be used in any residential premises. Application of chipboard limited in children's rooms and hospitals.
Cost - often decisive factor when choosing furniture. MDF is 1.5–2 times more expensive than chipboard and is used for the manufacture of premium and luxury furniture. Economy segment products are almost always made from laminated chipboard.
The cost of MDF facades can vary significantly depending on the type of finishing material. The most economical coatings are PVC film and plastic sheets, higher on the price scale is enamel (painting), the most expensive finish is veneer natural wood.
What to choose for each room?
The advantages of MDF are obvious, but it is an expensive material. Furniture made entirely from MDF is rare. Manufacturers usually offer combined options. The cases in the vast majority of products on the market are made from laminated chipboard, and the facades are made from MDF, laminated chipboard or a combination of both. This approach allows you to use all aesthetic advantages of MDF and prevent a significant increase in the cost of products.
For a layman, the difference between materials in finished furniture is not always obvious. This can often be determined by appearance– parts with milling and bends are made only from MDF.
For each room in the house, optimal recommended solutions can be identified for the selection of materials in accordance with operating conditions.
- Living room, hallway. For cabinets, cabinets and other furniture in rooms general purpose you can choose facades from any material in accordance with your budget and individual requirements for appearance. In order to save the family budget, laminated chipboard is also quite suitable.
- Kitchen. Here the furniture is subjected to special loads, changes in temperature and humidity, and exposure to food contaminants. If finances allow, purchase a set with MDF facades.
- Bathroom. Here it is definitely recommended to install furniture entirely (including the body) made of MDF. The low moisture resistance of chipboard automatically excludes the use of this material in rooms with high humidity.
- Bedroom. It is better to prefer sets made of MDF. Furniture made from laminated chipboard is acceptable only if it is of very high quality, with careful processing of edges and joints.
- Children's room. In terms of environmental indicators, undoubtedly better than MDF than laminated chipboard.
When choosing materials for furniture, it is necessary to proceed from the operating conditions of the products and financial capabilities. Cost is the only point in favor of chipboard. All else being equal MDF conditions– the preferred material for the manufacture of furniture facades. Such products have all the advantages of natural wood, and in terms of strength and moisture resistance they even surpass natural wood, while being much cheaper. Wide choose finishing materials allows us to produce furniture according to the individual requirements of each customer.