A tall, compact flowerbed made from a pallet takes up minimal space, and greenery grows on it on both sides. From several such vertical flower beds you can create a beautiful hedge. Vadim Lipatov from Moscow tells how to make it.
TO MAKE A FLOWER FROM A PALETTE YOU WILL NEED
- Pallet
- Several boards to size
- A piece of fine metal mesh
- Screws and washers
- Piece of geotextile
- Wire, metal scissors, screwdriver, hammer and gloves
- 2 to 4 steel stakes or pieces of reinforcement
Step 1.
To make a flower bed you only need one pallet. You can purchase a new one and artificially age it using brushing, or purchase a pallet that has already been used. Of course, old pallets are visually attractive both in price and appearance, but be careful when choosing so as not to use rotten wood in your work.
Typically the pallet consists of six slats at the top and three at the bottom. To begin with, you need to bottom side add three more slats.
TIP The gaps between the slats are quite narrow, so you may want to remove one or two slats if you plan to use larger plants.
Step 2
Turn the pallet over and cut a piece of chicken wire to fit over one half of the opening. You can attach the mesh to the pallet using washers and screws.
Step 3
Turn the tray over so that the side with the metal mesh is on the bottom. To avoid washing out the soil and germinating weeds, it is necessary to cut out and lay geotextiles on the bottom of the pallet.
TIP: If your garden does not have a structure or the formation is not completed, then you can make several such pallet flower beds and connect themformtriangleorsquare.
Step 4
Place the pallet in the permanent installation location and secure it steel reinforcement or wooden stakes. In my case, I was able to attach one side of the pallet to the fence using wire.
Step 5
The last step in making such a flower bed is filling the pallet with soil and then compacting it. It is better to shed the soil. If desired, the entire surface of the pallet inside can be lined with geofabric or thick film. But when growing ivy or other climbing plants It is not advisable to do this.
How to make a vertical flower bed from pallets. Flower beds made from pallets photo.
We continue the theme of homemade products from wooden pallets, this time we will make an original flower garden from a pallet, which can be installed not only in the country house, but also in the apartment on the balcony. IN Lately V landscape design Vertical flower beds have become popular; they allow you to add greenery to the outer walls of buildings and transform their appearance. Wooden pallets are great for making vertical flower beds.
How to make a flower bed from a pallet.
To make a flower bed from a pallet we will need:
- Pallet.
- Pallets are usually used for loading various materials in warehouses. We will need a pallet in good condition, without broken boards.
- Geotextiles (landscape fabric).
- Furniture stapler.
- Sandpaper.
- Paint or varnish.
- The soil.
- Flower seedlings.
When all the materials have been collected, we begin making a flower bed from a pallet.
To start front part The pallet needs to be sanded with sandpaper to remove roughness. To make the flower bed last longer, it is advisable to paint the pallet or open it with stain and varnish.
Now you need to take the geotextile, fold it in half and use furniture stapler, staple the bottom of the pallet and one side panel. The staples must be hammered in increments of no more than 5 cm; we also nail the geotextile to the middle bar of the pallet.
We lay the pallet horizontally, fill it with soil and plant flower seedlings in the gaps between the boards. Flowers need to be planted close to each other so that the soil does not spill out of the flowerbed.
We also plant flowers on one side of the pallet, which will be the top of our flower bed. We water the seedlings and leave them horizontally for a week so that the soil compacts and becomes denser.
We turn our flowerbed over vertically and install it; the flowerbed can simply be leaned against a wall or a fence, but it is better to hang it.
To secure the flower garden to the wall, you can use hangers; we attach the hangers to the pallet with self-tapping screws, then drill holes in the wall and fix the hangers with dowels.
With the help of a vertical flower bed you can transform external wall buildings, deaf concrete fence or just decorate yours garden plot or balcony.
Popular homemade products from this section
Do-it-yourself lounger for a summer house…
street summer cuisine with your own hands...
What can you make from pallets with your own hands...
Homemade wooden bench for a summer house...
How to make a stool drawing
Do-it-yourself sink for the dacha...
DIY garden chair...
How to make a birdhouse out of wood: drawings, dimensions...
What can be made from cinder blocks at the dacha...
Pallet chair
DIY garden lanterns…
DIY hanging hammock chair…
40 Incredible Pallet Furniture Ideas
IN last years a lot of attention is paid to recycling various “garbage” to create incredible interior solutions - original, functional and very budget-friendly. This movement began in Europe and America and gradually reaches Russia, first similar projects designers light up, and gradually fashion reaches the masses. Everything comes into play: car tires, old, sometimes broken utensils, scrap metal and of course construction pallets(pallets), they are discussed in this post...
Pallets can be purchased from various organizations that sell and purchase pallets, including: major cities There are enough similar companies. Their direct purpose is to protect loaded boxes, tanks, building materials, and bags of dry mixtures during transportation. Pallets are made of environmental material– the wood is usually pine, which means it can be processed well.
So, I present to your attention 40 ideas on how to make furniture from pallets:
1. Bar for glasses and bottles from pallets
2. Garden furniture made from pallets
3. Kitchen shelf made of wooden pallets
4. Shelf, flower stand made from pallets
5. Pallet on the wall
6. Clothes hanger from a pallet
7. Sofa and coffee table from pallets
8. Vertical gardening from pallets
10. Pre-bed table on wheels made from pallets
11. Pallet bed
12. Wooden garden shelf
13.Podium in the garden made of pallets
14. Pallet on the wall - a shelf for small items
15. Garden furniture made from pallets
16. Vertical bed made of pallets
17. Wooden table with your own hands
18. Flowerbed made of wooden pallets
19. Pallet wall
20. Recreation area at the dacha
21. Garden furniture made from pallets
22. Seedling box made from pallets
23. DIY furniture from pallets
24. Sofa
25. Kitchen stand made of pallets
26. Wooden wall paneling
27. DIY wooden table for tools
28. Pallet swing
29. DIY wooden sled
30. Wall panel
31. Gate in the garden
32. Bar counter made of wooden pallets
33. Wooden stand for books
34. Garden furniture
35. Flower stand in the garden
36. Wooden decorative panel
37. Garden bed made of pallets
38. Pallet chair
39. High table and chairs
40. Tea table
DIY flower beds from scrap materials 100 photos
It’s not always clear why you can’t just plant it in the country beautiful flower garden, and someone has a desire to do unusual flower beds with your own hands from scrap materials. Let's be honest, these experiments are not always successful, but we will try to introduce you to the most beautiful options such flower beds. 
Let's see whether such flower beds are capable of decorating our dacha or not.
DIY flower beds made from old things.
We all replace the windows in our house over time, and the old windows, although they don’t look good, still seem to be still strong. It’s a shame to throw them away and there’s nowhere to really use them. On a blank wall of a house or barn, you can make original flower beds imitating a window from old windows. A completely acceptable option is to tidy up the old window, remove the old glass and add a box for flowers and fastenings along the edges of the window.
If the house is thrown away old furniture, then boxes are also the basis for original flower bed. From small boxes and cutting branches you can build a beautiful flower train. Since the boxes are quite capable of getting wet from rain over the season, it is wiser to place such a flower garden on the veranda or in the gazebo. 
Let's look at a version of a flowerbed-bench using large boxes. These can be either chest of drawers or regular drawers. It looks like it turned out to be a very decent bench-flower bed.
How to make flower beds from natural materials at hand in the country.
How to make a flowerbed from a log.
In order to have enough space for flowers in the flowerbed, a log is required big size– with a diameter of 50 cm or more. How to choose the right container for a flower bed in a tree is shown in the photo. There is an economical option for such a flower bed, when wooden box the long sides are lined with slabs, and two cuts of logs are glued to the end of the box.
DIY flowerbed from a stump.
In life everything is a little different than in the photo. The stump must be very large and strong. If you use an old stump for a flower garden, it will begin to crack and fall apart due to watering. Alternatively, you can take a strong medium stump, split it in half, select the middle part and then glue the two parts of the stump together. By placing a pot of flowers inside the modified stump, we get a completely aesthetic imitation of a flower bed made from a stump.
Flowerbed made of old wood.
You are lucky if you have an old tree. With the help of ten hanging pots with petunias, it can be turned into luxurious flower bed. It is appropriate to complement such a flower garden with a cage of flowers.
A fun little flower bed can be made with minimal effort.
The difficulty of making flower beds with your own hands from scrap materials lies not so much in the expenditure of time or materials, but in the ability to see beauty in ordinary, often no longer necessary, things.
Do-it-yourself flowerbeds from scrap materials after renovation.
I don’t know about you, but I’m most curious about flower beds made from the remains of new materials. Perhaps because we are renovating our house, and there are plenty of such materials. Let's see where they can be applied.
How to make a “basket” flowerbed from linoleum.
From a dozen iron rods and leftover linoleum, it’s not at all difficult to make a beautiful and large flowerbed-basket. Moreover, it is not necessary to fill the basket with soil and plant new flowers in it; if you surround a peony or daylily bush with this basket, it will also be beautiful.
Do-it-yourself vertical flower beds from plastic pipes.
You can make a vertical flower bed from plastic pipes. The depth of such clubs is very small - only plants with a shallow root system will feel good here - purslane, succulents, etc. Where will the excess water flow? If you make holes at the bottom, then dirty water will stain the wall. You can make an irrigation system with tubes for drip irrigation each module or do it easier - use a design such as a flower pot for cups with small flowers. Solution with painting the pipe in bright color- very nice.
How to make flower beds from hollow building blocks.
By gluing a mesh to the bottom of the block, it can be used as a flower bed. The coloring of the blocks is wonderful. Perhaps it's wallpaper?
Flowerbeds made from wooden pallets.
There is a sea of ideas What to make from pallets, but the version of a flower garden - a doghouse looks unexpected. I hope this country option kennels and the dog has a more comfortable one permanent place. In any case, the pallets must be thoroughly sanded, protruding nails must be buried and painted, since the dog can get injured on the untreated surface of the pallet.
DIY flower beds made of cement.
Beautiful and simple containers for flowers can be made from cement. We take any container - a basin, a bucket, a pot. We cover the bottom with a piece of reinforcing construction mesh; this will be the future hole of our pot. Cover the rest of the surface with cling film - it is soft and fits tightly to the surface. Cover with regular cement mortar, on top there is a layer of mesh and another layer of mortar. We decorate with pebbles, crushed stone, pieces of tiles, etc. When the solution has hardened, we take out our mold and get a finished pot of any shape and size.
An original version of a garden container for flowers is obtained using soft shapes. We fill the original pot with something heavy and press it into a plastic bag filled with solution. When the mold has hardened, we put it in a bag moistened with liquid cement mortar, wrap the edges of the bag inside and coat it with the solution. Important detail- rope tie.
Gabion flowerbeds made of pebbles and mesh.
Gabion flower beds are a fashionable trend in landscape design. Perhaps this version of the flower bed is more appropriate as part supporting wall in the garden.
Popular options for DIY flowerbeds made from scrap materials.
Flowerbeds from plastic bottles.
Plastic bottles are everywhere, we throw them away every day, and it’s understandable to want to somehow use them at the dacha. From big plastic bottle and plaster you can make a swan or other garden figurine.
By cutting an ordinary plastic bottle and painting it, you can get such a cheerful flower garden.
In order for flower beds made from plastic bottles to look neat, it is advisable to paint them.
DIY flower beds made from tires.
The main thing in such a flower bed is to be neat - taking into account the fact that paint on rubber does not adhere well, such a flower bed must be painted every year.
Old iron barrel can also become a flowerbed. Unpretentious lobelia feels great in such a flower garden.
Flower garden made from old CDs.
A plastic cup and three old CDs - and you have a miniature flowerbed for your desktop or kitchen.
Flowerbed-stream. From large containers you can make a flowerbed-stream. You can read more about the intricacies of creating such a flower bed in the article “Secrets of designing beautiful flower beds”.
Flowerbed-well. Do you need to decorate an old inactive well or are you ready to make one? decorative imitation, such a flower bed will become a bright accent in any garden.
Many flower beds made from odds and ends are fun and cute, and look great as a playful accent to your landscaping. It is important that these flower beds look neat, the plants in them feel comfortable and have healthy looking. Some of the flower beds will not be in our garden for long, but the most successful ones will delight us for years. After all, in a good dacha there is always room for a bold experiment.
Additional various options We have prepared DIY flower beds from scrap materials for you in our video.
Our readers have repeatedly asked how you can make a vertical flower bed of extraordinary beauty using wooden pallets. In fact, special beauty is created not only by the appearance of wooden pallets, but also by the flowers or other crops themselves planted in the containers of the pallet. However, such an original flower garden attracts gardeners not only with its style and beauty, but also with its compactness. Vertical flower beds save space, allow you to green the outer walls of buildings and transform their appearance. Read more about this in our article.
Whatever an ingenious person can come up with to make from wooden pallets! A sofa, a bed, a coffee table, a wardrobe, a sideboard, and now another newfangled idea - vertical wooden flower beds. Making them is not that difficult. Let's take a closer look at how this is done.
For a vertical flower bed we will need: a pallet (pallet), geotextiles (landscape fabric), paint or varnish, sandpaper, a furniture stapler, soil for plants and seedlings.
Help from the "Economy"
It is very important to know that not every culture is suitable for vertical flower bed. For planting it is best to take seeds annual plants(marigolds, petunias, lipsticks). In this design you can also grow strawberries, wild strawberries and herbs.
At the first stage of work, it is necessary to remove all roughness and rough spots using sandpaper. And to make the flower bed last longer, the tray can be coated with waterproof paint.
Since the back of the pallet and the sides will be covered with fabric, choose the best side of the pallet for the “face” of the flower bed.
Lay it down front side down, and then cover the “back” of the pallet with fabric. To do this, take geotextiles, fold it in half and, using a furniture stapler, cover the back wall, bottom and two sides of the pallet. The distance between the staples should be no more than 5 cm. We also nail the textiles to the middle bar of the pallet. Lay the tray horizontally and pour plant soil inside.
Advice from the "Household"
You can make pockets from geotextile for each row of the bed. And although it will take a little longer, the soil consumption will be much less.
Now let's start planting flowers for our vertical flower bed. Start planting plants from the bottom row and plant close to each other so that the soil cannot spill out.
We also plant flowers on the very top part of the pallet, which will be the top of our flower bed. We water the seedlings and leave them in a horizontal position for two weeks. This is done so that the plants can take root and the soil can be compacted.
After two weeks, turn the flowerbed vertically and lean it against the wall. Plants should be watered frequently, as the soil will dry out, especially in the upper part of the flowerbed.
In about a month, the seedlings will take root, the roots will sprout and the soil will strengthen.
Advantages of a vertical flower bed:
- space saving;
- unusual design;
- easy care of plants in a flower bed: since the flower garden is most often located at eye level or slightly higher, weeding or harvesting is much easier, unlike a regular garden bed, when you need to bend low and strain your back;
- plant roots and berries rise high from the ground, which protects them from small pests and rodents.
Disadvantages of a vertical flower bed:
- plants need frequent watering (a hydrogel or drip irrigation system is used to retain moisture);
- since only compact containers are used in vertical beds, only low-growing plants that will require good feeding;
- planting in vertical bed strawberries, you need to take into account that the containers must be insulated for the winter so that the root system does not freeze.
Most popular on the site
01/18/2017 / Veterinarian
BUSINESS PLAN for breeding chinchillas from Pl...
IN modern conditions economy and the market as a whole for starting a business...
12/01/2015 / Veterinarian
If you compare people who sleep completely naked under the covers and those...
11/19/2016 / Health
If in winter you are itching to work in the garden and vegetable garden, but go out into the garden or...
03.01.2020 / People's Reporter
Ipomoea-yam - a new squeak in the landscape...
Today I want to introduce you to a plant that only “...
01/03/2020 / Flower garden
Lunar-sowing calendar of the gardener...
11.11.2015 / Vegetable garden
Hazelnuts are an amazing long-liver. He can live in one place...
02.01.2020 / People's Reporter
This gymnastics helps in complex treatment cervical osteochondrosis from...
01/03/2020 / Health
It is best to prepare not only the holes for cucumbers, but also the entire bed....
04/30/2018 / Vegetable garden
It only seems at first that six hundred square meters is a lot. Gradually...
You can use wooden shipping pallets to create stylish fences for flower beds. Pallets (pallets) are usually left after delivery of building materials. They can be purchased separately or taken for free in stores where they are used for delivery of goods.
The products do not require any special modifications; they can be immediately used for installation. Pallets have same sizes, which simplifies installation.
Advantages of pallet fencing
Fences made from wooden pallets have a number of advantages:
- ease of construction;
- affordable price;
- for arranging a flower garden small sizes takes only 2-3 hours;
- high strength and durability;
- protection against the entry of pets;
- ease of replacement individual elements structures in case of damage.
Important! To extend the service life of the structure, lumber should be treated with a special moisture-proof and antifungal impregnation, or at least painted.
Types of pallets for fencing
Depending on the design, pallets are divided into 2 types:
- single. Made from bars and boards. Typically, such products are disassembled and the fence is assembled from separate boards. Assembled pallets are rarely used for arranging flower beds due to their less attractive appearance. appearance. Pallet bars can serve as support pillars;
- double. Both sides are covered with boards. The best option for the construction of aesthetic fences around flower beds. Usually mounted in assembled form to make the fence more aesthetically pleasing.
Materials and tools
To build a fence you will need:
- required number of pallets (depending on the size of the flower bed);
- support pillars. For flower beds it is better to use wooden supports;
- cement-sand mixture and crushed stone for concreting supports;
- building level;
- screws and a screwdriver. You can also use regular nails.
Note! Concreting the supports extends the service life and increases the reliability of the structure. But, if in the future you plan to dismantle or move the fence, you should not concrete the pillars.
Installation stages
Typically, fences are erected in the following sequence:
- Marking the site, determining the installation locations for supports.
- Preparing holes for posts. A depth of 30 cm is sufficient for a flower bed.
- Installation of support posts. The bottom of the post is wrapped with roofing felt to protect it from moisture, and a small layer of crushed stone is poured into the hole. Leveling the supports and pouring concrete.
- Adding crushed stone after the concrete has hardened.
- Attaching pallets to support pillars screws or nails.
- Treatment with moisture-protective and antiseptic agents.
- Painting and decoration.
Decoration
You can decorate the fence in any way, based on your own preferences. Most often, fences are decorated in the following ways:
- painting. For flower beds it would be advisable to use several different bright colors, such a fence will turn out to be more original and attractive;
- painting. The fence can be painted with all kinds of patterns;
- boxes with flowers. Very a good option for flower beds. The boxes are hung directly on pallets using a rope, or screwed with screws.
This way you can quickly and without special costs build a colorful fence for a flower garden of any size. The fence can be decorated with any decorative elements. If necessary, the fence can be easily disassembled and moved to another location.
Wooden pallets have become very widespread and popular today. Most often they are used to place various cargo, such as boxes, packs or bags, as well as other goods that need to be unloaded or loaded. But this is not the only area of application for durable and stable wooden pallets. Today they are used to create playgrounds for children, build fences and much more, which we will talk about today.
Very often people use wooden pallets for summer cottage for various crafts, including for making garden furniture. Pallets may have different sizes Moreover, they are stable and strong. Pallets can be produced at a special factory, but it won’t be difficult to make a wooden pallet yourself. You don't need to have any special skills or materials to create a pallet. You just need to find boards and beams, nails, and the right tools.
Raised beds from a pallet
Why do people so often use pallets in their households for other purposes? The fact is that pallets are not expensive. They are easy to get to create crafts at the dacha. The material used is pine wood. It can always be treated, for example, on a used pallet, to increase its service life. Even if you find pallets that are not completely new, you shouldn’t give up on them: they can still be restored and used for crafts in the country.
So, let's talk about what you can create with your own hands from pallets at your summer cottage. We have already said that a wooden pallet is mainly used to lift goods above the ground. The reason is the appearance of dampness and water on the ground, which can spoil the cargo. Taking this into account, you can make platforms from pallets on your site. For example, you need to do some work in your garden, but it rained yesterday. To avoid walking on muddy beds, you can make a platform out of pallets. The design is very simple to make. You just need to find the pallets and cover them evenly the required area. It is important to maintain safety when creating a one-piece structure. Obviously, the pallets will need to be secured to each other. You can use small wooden planks, which are then secured to the pallets with self-tapping screws.
A barn, hangar, basement and cellar are considered household. You can use pallets to create a floor in them. If you do not want to walk on a damp, cold concrete floor, then lay it on wooden base. But there is a drawback: the floor will not last long, since wood absorbs moisture. The pallet will last much longer if it is laid on a concrete base.
To prevent poultry and livestock from freezing in barns, it is necessary to create a base on the floor that will allow the animals to feel comfortable. In this case, wooden plates must be laid on top of the pallets.
Photo: Woodpile for the dacha made from firewood pallets Even dacha buildings are made from pallets. For example, it’s easy to build a small rabbitry out of pallets with your own hands. Pallets will serve as a high-quality supporting structure. As a rule, pallets have the correct geometric shape. This means that they are easy to use in construction.
Country houses made of pallets, photo Landscape designers also say that pallets can be used near alpine slides, flower beds, gazebos, swimming pools and so on. So, in each area you can find many ornamental plants, most of which are curly. For this we use wooden pallets. Let's create supporting structure. It is noteworthy that not only will plants grow on it, but you can also install flower pots. Bridges, gazebos, slides, etc. are made from pallets on the site.
Garden furniture made from pallets
Photo: Sofa made of pallets in the country You can easily make a sofa, armchair, swing with your own hands at the dacha made from pallets. A soft materials You can buy or sew it yourself. So, with minimal financial and time costs, you will create comfortable furniture on which you can relax in the evenings in the garden or just sit during a break between work.
So, in brief overview We’ll try to name a few more that you can make yourself from wooden pallets. The first item is a shoe rack. If you place one pallet vertically, it will become an ideal stand in itself. You can make an excellent hanger for clothes if you attach hooks to the pallet and hang it on the wall.
Is there no table at the dacha? No need to buy ready table in the shop. You can take several pallets and fasten them together. It will make a great table. To increase its functionality, we screw on the wheels.
In the basement, you can use pallets to make not only the floor, but also shelves for storing wine, vegetables and cans with seams.
Pallets are ideally used in flower beds where flower arrangements. For children, you can make a spacious sandbox, as well as a small playhouse.
As you can see, there are many opportunities to use pallets for purposes other than their primary purpose.
beautiful multi-colored pallet furniture Perhaps you have own ideas about what you can make from pallets with your own hands at your summer cottage. Feel free to make it.