A drawing of a corner cabinet will help you assemble it yourself.
If the room area is small, then each cabinet takes up a lot of space. There is a way out of this situation: instead of several bulky cabinets, you need to install one corner cabinet.
It is very roomy and takes up little space. You can learn how to make a corner cabinet with your own hands from this article.
In contact with
Classmates
Types of corner cabinets
- trapezoidal;
- in the form of the letter “G”;
- triangular;
- 5-wall.
Each option is interesting in its own way; when choosing, you need to take into account the place where it will be located. Before work, be sure to make a sketch or drawing of the planned cabinet and make detailed drawings.
When performing calculations, it is necessary to carefully measure the dimensions of all walls and shelves. How to make a standard one small closet with dimensions 900 by 900 mm, height from floor to ceiling 2,500 mm, will be discussed in more detail below. Calculations of materials and a detailed assembly diagram will be presented.
Manufacturing process
Any construction work begins with the preparatory stage.
- A diagram of a corner cabinet is being drawn up.
- It is necessary to calculate how much and what material will be needed for the work. To make the calculation more accurate, an assembly diagram is also first drawn up.
- Prepare necessary tools and materials.
- self-tapping screws;
- glue;
- dowels;
- mirrors;
- accessories;
- rollers, there is no need to save money here, it is better to take high-quality ones so that they last a long time;
- profile, preference is given to steel.
Immediately check the set of tools so that there is no downtime in work later. You will need:
- level;
- roulette;
- hacksaw;
- hammer.
In order for the work to be done more accurately and quickly, it is better to entrust the cutting of the boards to the craftsmen and do this work in the workshop. You can do the assembly yourself.
Specification of sizes
- The width of the compartment where outerwear is stored cannot be less than 0.8 m.
- The height of the compartment for storing outerwear cannot be less than 1.4 m.
Pre-planned diagrams will help you avoid making mistakes in sizes.
Assembly
- first, steel corners are mounted where later it will be necessary to attach the side walls to the floor and ceiling;
- from finished parts assemble the frame;
- attach rollers to the door;
- install guides;
- install doors.
Good to know: When assembling a corner cabinet, it is imperative to use a level, otherwise distortions at the doors may occur.
When the main work is done, you need to assemble the cabinet inside. Install the brackets and arrange all the shelves in their places. After this, all that remains is to install the fittings.
The work is carried out in the following sequence:
- install partitions;
- secure shelves, hangers, mirrors;
- screw the handles.
Using the same scheme, you can assemble your own cabinet from plasterboard. The operating principle will be slightly different.
Corner cabinet made of plasterboard
To manufacture, you will first need to carefully work on the drawings. The quality and speed of work will depend on how they are made. The drawings are made as follows:
- We need to decide on the location of the future cabinet.
- Make a sketch, sketch detailed diagram, indicate the dimensions of all shelves, brackets, and parts there.
- All calculations should be carried out indicating the thickness of the material.
Note: When making a drawing, it is necessary to take into account every detail, the slightest inconsistency, and there will be difficulties during assembly.
Assembling a cabinet begins with installing the frame. First, markings are made on the floor and ceiling. For convenience, you should use a rubber shock-absorbing tape.
Sheathing
- Pre-cut blanks are placed in the designated places and screwed with self-tapping screws.
- The sheets are finally attached; the screws are placed at a distance of about 200 mm. The caps of hardware should be recessed by 1 mm.
- In the places where the shelves will be attached, you need to install corners. Next, the shelves themselves are laid on them.
Take note: There is no need to order cabinet doors in advance; it often happens that after installation work, sizes vary slightly.
Now all that remains is to mount the lamps and rods. When the main frame is ready, you need to measure everything again and order the doors.
Finishing
- prime the surface both inside and outside;
- carefully seal all joints with gypsum plaster;
- stick the crescent tape;
- install paint corners at all corners;
- apply thin layer putty, dry, sand and putty again;
- prime everything again, and after complete drying, finish it. This could be painting or finishing with tiles or other materials. Here the owner chooses at his discretion.
The entire closet is ready and will delight all household members for a long time.
How to make a corner cabinet with your own hands, see the following video:
In contact with
See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?
Would you like to suggest photos on the topic for publication?
Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!
The design of the living space plays a very important role important role in life modern man, so much attention is paid to its creation. In the interior of the rooms, every detail is thought through, starting from flooring, wall decoration and ending with furniture. At the same time, furniture should be multifunctional, ergonomic, reliable, durable and beautiful. IN Lately Many people prefer corner cabinets, as they fit perfectly with the overall interior of the room and do not take up much space. You can make corner cabinets with your own hands: this way you can free the room from the traditional bulky wardrobe.
Advantages of a corner cabinet
When decorating a room, special attention should be paid to the choice of furniture so that it is convenient, comfortable and does not take up much space. Recently, corner cabinets have become in great demand. They are an excellent alternative conventional models, as they have the following advantages:
- Versatility. You can independently make a cabinet of any size, any shape. In addition, it is possible to select with maximum accuracy desired color. The structure made in this way will harmonize well with the rest of the furniture in the apartment.
- Multifunctionality. The corner cabinet model can be supplemented with mezzanines, hangers, drawers and shelves. Therefore, the furniture will look compact on the outside, but inside you can easily place a lot of things and objects. Homemade corner cabinets will accommodate not only clothes, shoes, household appliances, toys, but even various means for cleaning. Before you begin assembling the structure, you need to carefully consider the placement of future drawers and shelves, so you can rationally use the space of the room.
- Ease of use. Modern door mechanisms make closing and opening of the cabinet silent.
There are many positive qualities, but the main advantage of corner cabinets is considered to be space saving. Thanks to its convenient design shapes, it can be easily installed even in the smallest room. Such models look original in the bedroom, living room and hallway.
DIY development stages
When planning to begin work on making a cabinet, you should carefully consider all the details of the future furniture, its appearance, sizes. In addition, you need to know how to make a drawing, a diagram of the cabinet, according to which the walls will be cut, and the assembly itself will be carried out. As a rule, the diagram contains all the necessary dimensions and distances that are needed to attach the parts. The drawing is drawn by hand or made to order. Before making a cabinet, you need to take into account various nuances.
How to make a drawing?
When creating schemes, first specify external dimensions products: dimensions of the cabinet box, its height and width. The drawings must also show the thickness of all parts. First, the design box itself is drawn, then its contents. All diagrams should consist of two main views: side and front. The sketches must include the width of the sections, the distance between the shelves, the height of the base and the dimensions from the beginning of the part to the attachment point.
How not to make a mistake with sizes?
When drawing drawings, you must use the most simple formulas geometry that everyone knows from school. At the same time, when drawing diagrams, it is worth knowing the exact dimensions of the cabinet. How to calculate dimensions - this question worries all novice craftsmen. However, there is nothing complicated about this: you should calculate the size of the diagonal yourself (for a standard size structure it is 80x80 cm), the thickness of the material and the size of the gaps, and you also need to design the angle of the facade.
To ensure that the facades open freely during operation and do not interfere with each other, it is worth providing for small gaps on each side.
What should the facade be like?
When assembling a corner cabinet with your own hands, you also need to know what the facade should be like. To do this, you initially need to design a model of the structure, then, according to the drawings, you need to manufacture and assemble parts, correctly measuring the dimensions of the opening. Many people purchase a ready-made facade (to order). However, if there is a desire, then it is quite possible to make it yourself. To do this, you need to use a geometric formula, not forgetting the thickness of the side walls.
How to arrange it inside?
When all the sketches are ready, all that remains is to decide what the inside of the cabinet will be like. It is worth noting that the “filling” of the design directly depends on personal preferences. The most economical option The use of stationary laminated shelves and clothes rails is considered.
If financial capabilities allow, then the cabinet can be additionally equipped with pull-out shelves, baskets, various products on retractable wheels.
Selection of materials
An important issue when self-production The choice of material also counts towards the cabinet. It is immediately worth noting that natural wood in this case, it is used quite rarely, because its price is high, and it is quite difficult to assemble a wooden cabinet that would meet all the requirements during operation. In addition, caring for such furniture is labor-intensive; natural raw materials are “capricious” to use and require additional coating protective varnishes and paints. Therefore, many craftsmen prefer to use plasterboard, chipboard and MDF to make corner cabinets.
Chipboard consists of slabs of wood shavings which are produced by hot pressing. Chipboard may differ in cladding options, thickness, number of layers and formaldehyde content. As a rule, slabs with a thickness of 16, 18 and 25 mm are chosen for the body of the structure. Their performance will not differ, the only thing is that the thicker the chipboard, the more solid the cabinet will be. Often the slabs are covered with a special film - to look like natural wood or plastic.
MDF– this is a finely dispersed fraction, which is essentially the same sawdust, only processed by dry pressing. Such raw materials are considered environmentally friendly. MDF boards decorated different ways, they are reliable and have an aesthetic appearance. In some cases, sheets of plasterboard are used to assemble furniture, which is available in a wide range.
When choosing raw materials for a cabinet, you need to consider not only its appearance, but also its practicality.
Accessories
When all the main parts of the case are ready, it’s time to start choosing components for the cabinet. Today, purchasing suitable accessories is not difficult. The components may vary depending on the shape of the structure and its contents.
For a corner cabinet of standard sizes you will need the following elements:
- shelf holder;
- self-tapping screws (for attaching adjustable supports and facade hinges);
- pole or crossbar;
- adjustable support;
- furniture hinges;
- pens;
- screws;
- washers for screws;
- nails;
- legs.
It is worth noting that the number and dimensions of components directly depend on the dimensions of the cabinet, the thickness of its walls and internal contents.
How to remake the old one?
Quite often, furniture becomes old-fashioned during use and loses its original attractiveness, but at the same time it is quite reliable and strong. In this case the right decision will be its modernization. In addition, it is quite possible to make a corner cabinet from an ordinary one or remake the structure from an old wardrobe. To create a new cabinet model, you will need to calculate the dimensions of the corner structure, prepare all the parts and process the old surface.
Sequencing:
- Delete old paint or varnish, sand all external parts of the furniture.
- Paint it. This can be either a plain layer or an original one with streaks. Looks good smooth transition(paints of different shades).
- Cover with varnish. In case if old wardrobe made from natural wood, then it has a natural texture that only needs to be supplemented protective coating. This restored product will fit well into the design of rooms decorated in eco and country styles.
- Decorate with appliqués from photographs or cover with film. Film with images of stone, wood, and metal looks unusual.
Then you will need to select the front fittings. This will change the appearance of the corner cabinet, and decorative overlays will accurately indicate the style of the room. We must not forget about replacing handles. If you choose models made of porcelain, painted with flowers, you will get a cabinet in the Provence style, but brackets made from palm root will indicate ethno.
A new wardrobe must also be equipped with modern functionality, this will make it comfortable and spacious. At the same time, it is better to remove the standard shelves from the old cabinet and replace them with multifunctional retractable systems. So instead of an outdated wardrobe you will get modern model corner closet with rails for all types of clothes, laundry baskets, shoe racks and hangers for belts and ties.
The presence of internal lighting in a corner design will not hurt.
You will learn more about how to make and how to restore a cabinet with your own hands from the following video.
How to put it correctly?
Furniture is important for every apartment. Wherein special attention deserves a corner cabinet, its placement directly depends on the room in which such furniture is installed. Often similar designs can be found in the kitchen. Thanks to its universal shapes, the cabinet will not only fit beautifully into general interior premises, but will also help save space. In addition, corner cabinets in the kitchen (thanks to many drawers and shelves) allow housewives to store various things.
No hallway would be complete without such an important piece of furniture as a wardrobe. It is a mandatory part of such a room. Corner cupboard easy to place in any corner of the hallway. In this case, the design will become decorative element in the interior, it will save space well.
Designers advise using corner cabinets in the nursery. It is in this room that children have to spend most of their time, so it should be comfortable for activities and games. The angular model is considered ideal solution for a child's room, it is very well suited for storing things, toys and does not clutter up the space.
Corner kitchen cabinets are quite popular furnishing items. They do not take up too much space due to the unique location. Corner cabinets can be made at home from various materials. Of course, you can cope with the task by doing as indicated in the instructions below.
To the positive aspects that distinguish the corner wall cabinet for the kitchen include:
- increase usable area premises due to proper placement of furniture. Installation is carried out in places where it is difficult to install other options;
- high capacity and functionality. At first glance, it may seem that the corner floor cabinets are not so large, however, inside them you can install a variety of shelves and arrange compartments for organized storage food and utensils;
- the ability to choose optimal sizes, since floor-standing cabinets are varied in size. Almost every person is able to understand how to collect convenient cabinets to the kitchen, giving them the necessary parameters;
- variety of methods that can be used to decorate front panels. If desired, the kitchen floor cabinet can be decorated glass inserts or patterns. This will make the finished product more attractive. However, kitchens Leroy Merlin and they look so aesthetically pleasing and do not require additions;
- Possibility of combination with other items in the kitchen.
Main features of corner models
The list of the most important differences includes:
- doors are not required. Upper cabinet open type Great for storing beautiful dinnerware sets;
- variety of forms. The design can be triangular, L-shaped, or even trapezoidal (by the way, triangular variations have become very widespread in our time). Choosing the right varieties depends on the people who will be using the cabinets and their preferences;
- the lower part of the structure, located on the floor, is often used to create sinks. The sink placed on top will be convenient to use;
- it is possible to embed large views household appliances for its more efficient operation;
- used for facade decoration different methods. The most common options are applying a pattern to wall cabinets or upholstering them with some material;
- the lower cabinet under the sink is often equipped with legs, which makes cleaning the room easier;
- The upper corner cabinet can be equipped with carousel shelves to store dishes and other accessories.
Corner kitchen cabinet dimensions
The dimensions of kitchen furniture can vary widely. If they are included in kitchen set, then they have optimal sizes to combine with other set components. If the cabinet is selected separately or designed independently, then it must match the other elements.
For a person who is going to create a corner kitchen cabinet with his own with my own hands, it is very important to decide on the dimensions of the future product. They are poured depending on whether new item interior located on the floor or on the wall.
The corner-type hanging cabinet has standard dimensions. The width is 15-80 cm, and this parameter must correspond to the shape of the cabinet and its width. The standard depth is 35 cm, however, the calculation must take into account the depth of the drawers that will be located below. It is recommended to install the finished product at a distance of 50 cm from the cabinets located below. This - standard sizes any wall cabinet. This is necessary for those people who are interested in how to calculate corner option without making a mistake.
If we are talking about creating floor furniture, then it will have other standard sizes. They need to be taken into account when planning to make a kitchen drawing. For compact room would be better suited a cabinet 50 cm deep, no more. The typical height is 85 cm (however, this can be varied in individual cases). The width can be 15-80 cm, with the optimal figure being 60 cm.
As a rule, the lower element is installed after the installation of the upper one has been completely completed. The owner has the right to choose furniture with or without legs.
Corner cabinet for sink
A cabinet under the sink is a very common option. Its dimensions can vary widely, as they depend on the washing parameters. You also need to take into account the method by which the structure will be secured. For such cabinets, standard sizes are calculated individually. The width can be more than 60 cm, and the depth can reach 80 cm (the downside is that such an interior element will be very difficult to use). As a rule, for large products a pair of facades is chosen. However, if necessary, assemble models with one door.
Taking measurements and drawings
The assembly of a corner cabinet cannot begin without creating a diagram. In turn, to carry out drawing work, you need to take measurements, and then create a kitchen diagram so as not to make a mistake. When performing this work, you need to take into account some nuances:
- The thickness of the walls should be chosen taking into account what objects will be placed on them. It is important to show on the diagram whether finished design accommodate household technical devices or not. The thickness of typical shelves is 18 mm. If you plan to store something heavy on them, it is better to choose blanks with a thickness of 21 mm or more;
- the depth of the finished products should not be more than 40 cm;
- You should not place the hanging cabinet too low if there is a stove directly underneath it, as the material will deteriorate under the influence of elevated temperatures.
According to the standards, the size of the corner cabinet is 60x60 cm, while the width of the front panel is 42 cm and the depth is 30 cm. Corner kitchen- This great option For small apartments, where it is difficult to implement another arrangement option. Look at the photos presented on our website to find the perfect option.
1
2
3
How to make a corner cabinet for the kitchen?
- Select suitable material and purchase it at the right amount. Calculating the purchase volume is very simple if you follow the previously drawn up diagram.
- Prepare the tools necessary for the job. Their list includes: fasteners, hangers, sealing compound, furniture screed, drill, sandpaper, fittings and some other devices. It all depends on what model you plan to create.
- Prepare the basic details for the future cabinet. It is most convenient to cut them from solid slabs. Be extremely careful when performing this work, use power tools to achieve best result. Alternatively, you can contact a specialized company that will make blanks at a professional level.
- Do through holes to insert dowels into them and fasten them individual elements included in the furniture. Lubricate the chopsticks with adhesive to increase the reliability of the structure.
- Check the evenness of individual parts of the structure using a level.
- Screw the confirmations into the dowels using a hex wrench for this purpose.
- Install the legs and adjust the height. If the design does not require legs, this step can be skipped.
- Make holes in the side elements and place cross-shaped fastenings for the doors in them.
- On the walls located on the sides, attach elements for rails, due to which the boxes will roll out. Secure the rails.
- Attach the back wall.
- Secure the fittings.
Corner cabinet diagram Corner cabinet drawing
The presented instructions will help every person understand how to make a corner cabinet for the kitchen with their own hands; the various diagrams and drawings presented here will simplify the solution of this problem. If you complete all the work correctly, you will enjoy the finished cabinet installed in the corner for a long time.
Finished corner kitchen cabinet
When the size of the room allocated for the kitchen is not impressive, you have to think about the smallest components of comfort, using every centimeter usable space. When we talk about kitchen units, we also mean the corner where two walls meet - a place that becomes useless if not thought through. However, it can become a very tangible help if you find the right approach. This approach usually involves creating a corner cabinet that fits perfectly into the overall scheme of the unit and makes it possible to use additional space.
Main settings
Kitchen furniture is manufactured to standards that depend on the parameters that determine the height of the cabinet you are going to assemble.
We list the main indicators that will be taken into account in the process of creating a corner cabinet:
- The width of the base - this indicator ranges from 10 to 12 cm, while its value is not affected by what type of stand will be used - solid or legs.
- The height of the cabinet is usually 70cm if you are not going to equip the cabinet with a sink. In this case, you need to make it slightly lower than the level of all other cabinets. This is done for convenience when washing dishes.
- Tabletop height varies from 2 to 4 cm. Depends on the material used, primarily on its structure.
- After all measurements, the height of the corner cabinet is usually about 84-85cm.
- The most common parameters for a cabinet are 90x90cm. Of course, the dimensions primarily depend on the parameters of other parts of the headset.
It is important to know: the distance between the tiers of the headset is usually 60cm, while standard height wall corner cabinet, creating the possibility of comfortable use by people of average height is 70 cm.
Which product shape should I choose?
Once you decide on the dimensions, it’s time to think about what shape of the product you would like to fit into your kitchen space. We list the three most important varieties:
L-shaped cabinet - this form of cabinet is distinguished by the fact that best shape the door for it is folding, like the one used in trolleybuses. This way you can get the most out of your viewing experience. inner space, which, by the way, can be turned from ordinary shelves into a carousel with best angle rotation.
A wall cabinet of this shape will serve as an excellent space saver. The cabinet itself is also good because it can successfully accommodate a sink. Since in Soviet apartments water supply and sewerage communications are usually located in the corners, you do not have to extend the pipes.
Attached design – less convenient option cabinet location. A small cabinet with a door at an angle of 90 degrees is added to the blank cabinet located in the corner. The problem is that with this arrangement you only have access to the interior of the smaller cabinet. This design also allows you to place a sink, but the plumbing fixtures are placed in a blind module, and space for dishes and kitchen utensils is provided in an accessible one.
Remember that when the sink is located in a blind section, you significantly complicate access to it for a plumbing specialist if the need arises. repair work, and if the sink is removed from the closet, it will remain empty and useless.
However, practice shows that it is better to place the sink in another place, and equip the empty cabinet into a place for cooking or put a microwave oven there.
The space in the accessible module can be equipped with a carousel with a slight rotation angle or pull-out baskets.
Trapezoid shaped cabinet – original and stylish option, which however has its drawbacks. This form has one door, and sections of the kitchen unit are adjacent to it on the sides. The trapezoidal cabinet looks quite solid, especially in kitchens with a large area, but it is not entirely rational.
Firstly, the straight door makes it difficult to access some areas of the cabinet, especially near the wall. And secondly, it is better to avoid installing a carousel and a sink at the same time in such a cabinet at the same time, since the first, due to the force of friction, will constantly damage the second. So it’s better to put a microwave or other equipment on the cabinet.
Ready-made corner kitchen cabinet
Getting ready for assembly
Any product must be designed before assembly. This process can be divided into several stages:
- Determine the purpose of the cabinet - whether it is designed for washing, preparing food, or whether you want to install kitchen appliances on it.
- You should have before your eyes general dimensions both the cabinet itself and its components.
- Decide on the inside of the cabinet - whether it will be regular shelves, a carousel or pull-out baskets. It is important to calculate the convenient distance between the shelves and their number.
- Think about the design and color scheme.
- Determine the material from which you will make the cabinet or cabinet.
- Create a drawing that will clearly show what is where and how it is attached.
The best materials are chipboard or laminated chipboard, which is strong enough to withstand moisture and required processing looks very attractive, while having a low price.
Materials and tools
Sheets of chipboard or laminated chipboard;
Facade PVC, which will cover all visible ends and edges of the product;
Euroscrews with dimensions 40x4.5 or 50x7mm;
Self-tapping screws;
Suspensions;
Sealant;
Furniture screed;
All necessary fittings such as hinges, handles, etc.;
Drill and drill bits with a diameter of 4.5, 7 and 8 mm for working with wood;
Emery cloth;
Hex wrench;
Level;
Roulette.
DIY corner module
The next stage of work will be the preparation of the main parts for the future cabinet. They will have to be cut out from solid chipboard slabs, so you will need maximum care and precision. However, this does not guarantee good quality works At least at home, certain factors can prevent this.
If you use a power tool for sawing, keep in mind that it chops laminate well. And in general high level vibrations may simply prevent you from fulfilling your plans with good accuracy.
To make your life easier, contact a company that can cut and even trim fragments of the future cabinet based on your project.
Assembling the cabinet
Now directly about the assembly process itself:
- Make blind holes and insert dowels into them to pre-fix the components of the cabinet. This way you can level the frame and increase the strength of the future product. The chops are pre-coated with glue.
- Once you insert the dowel into one piece, insert its end into the hole of the other and press the two pieces of the cabinet tightly together.
- Before full installation of the future product, check all its parts for evenness.
- Now the confirmations will be screwed into the dowels. This is done using a hex key.
- If your design included legs, it’s time to mount them to the main structure and adjust the height.
- Make holes in the sides of the future cabinet and insert cross-shaped fastenings for the doors into them using two self-tapping screws.
- On the side walls, build fastenings for the rails along which the drawers will slide out, and fix the rails themselves.
- Once the frame is created, attach a fiberboard sheet to its back wall.
- In the case of a wall cabinet, you need to attach fittings to it, with which it will be attached to the wall. Adjustable hangers will do this role perfectly.
How to assemble boxes
- The walls for the boxes are tightened with screws. As soon as you assemble three walls, insert pieces of fiberboard into their bottom, which were created according to the parameters of these walls.
- The fronts of the drawers must be secured using eccentric ties. In this case, the screws are screwed into the facade, then the side with the head is inserted into the bushings located on the sides of the drawers. The main thing is to make nests in them first. Once the bushings are in the holes, rotate them until they engage the screw heads.
- If we are talking about a corner cabinet, on bottom corners drawers, you need to screw the guides for the rollers.
When it comes to assembly oven, final stage excluded due to the lack of drawers in this type of cabinet.
How to install modules and embed a sink
At this stage ready product placed in a corner. If we are dealing with an attached lower module, then first we should install a cabinet with a sink with a ready-made hole for the pipes. Only then do you need to install a cabinet with a door.
You will need furniture intersection links when the time comes to connect cabinets to each other. A total of four fasteners are required.
If we are talking about a corner kitchen cabinet in which a sink will be installed, under this sink you will first need to make a hole in which the sink will be placed.
To make a cutout for the sink, place it against the countertop and create a marking with a pencil, and then at the edge of this marking line, drill a hole of such a diameter that a jigsaw file can easily fit into it.
Once the socket is cut, the sink is inserted into it and screwed using the special fastener supplied in the kit. The cut line after this operation is treated with sealant.
Attaching the table top and doors (video)
When the cabinet or wall cabinet has taken its place in the set, all that remains is to resolve the issue with the countertop and doors:
- The kitchen countertop is marked with an additional allowance of half a millimeter on each edge. If after installing the cabinet there is a small gap between it and the wall, the baseboard will help hide it.
- Using a jigsaw, the tabletop is cut out according to the specified dimensions.
- To secure it, line it up so that there is a 3cm seam allowance at the front to bring the edges flush. Using self-tapping screws from below, we fix the tabletop.
- When assembling corner cabinets, the joints with other modules can be hidden using special metal strips, which are attached to the ends of the countertops using small self-tapping screws.
The last final stage is hanging the doors:
- The doors are placed on cross-shaped plates that were screwed in advance, after which we tighten the bolts.
- Close the doors and make sure they are in the correct position. If there is no picture pleasing to the eye, adjust their location using bolts.
Based on everything described above, you can understand that making a corner cabinet or cabinet with your own hands is not so difficult. However, this is quite a responsible task that requires you to be precise in size and action. Therefore, if you lack confidence in your abilities, do not hesitate to ask knowledgeable people for advice.
It’s difficult to make a drawing of a corner cabinet yourself; our article will tell you the solution.
You can assemble a corner cabinet with your own hands if you try.
From our article you will learn about all the features of cabinets designed for corners and openings.
In contact with
Classmates
Peculiarities
- Built-in.
Wherein structural elements Such furniture is the ceiling, floor, as well as the walls of the room. The most economical in terms of using living space.
Labor-intensive to manufacture with poor quality construction work. The installation of fasteners causes defects on walls and ceilings. It is no longer possible to move it.
- Hull.
They differ from built-in cabinets in their mobility and installation time. Protect the wall decoration from contact with the internal contents and doors.
Depending on where they are located inside the home, they can be straight, angular or radial. In turn, corner structures can be created:
- with a beveled corner facade with a hinged door;
- with elements located at an angle relative to each other;
- like two independent pieces of furniture installed in the corner.
- Radial.
Only a real idea of technical advantages And functionality the chosen design will give a tangible economic and aesthetic effect.
Creativity
The issue of coordinating and budgeting an event with stakeholders is not idle. Not only the technical and economic indicators of the designed furniture, but also the social aspects of family life directly depend on its solution.
Preparing a preliminary design is not as labor-intensive as the main process of creating cabinet or built-in furniture. But it is the accuracy of the developed drawings and diagrams that will be the fundamental stone of the entire event.
- roulette;
- plumb line, levels (not bad if laser);
- squares of various sizes;
- flat wooden slats or metallic profile for drywall.
First of all, we decide on the depth of the furniture. In practice, this size is taken to be 50 cm. Taking into account that 8-12 cm of them will be occupied by doors.
We carefully check the geometry of the location of the future furniture. We especially accurately measure:
- the size of the angle between the walls;
- curvilinearity and defects of walls;
- distance and parallelism of floor and ceiling;
- we take into account the minimum distance between them;
- horizontality, evenness, rigidity of the floor.
Note: To eliminate unnecessary material costs and increase labor intensity, even without taking into account moral damages, it is necessary to once again check the accuracy of all measurements and the performance of all accessories.
Based on the existing preliminary design and the obtained dimensions, we prepare the project itself, taking into account:
- Assembly sequences carried out on site.
- Ensuring the greatest strength and reliability of the structure.
- In my own way internal filling must be functional.
- Provide ease of installation and further use built-in fittings.
- Between the shelves, a distance of no more than 40 cm will be rational.
- The height of the outerwear compartment is equal to the length of the clothing itself + 10 cm.
- The practical height for attaching the hanger rod is at shoulder level.
- The maximum height of the mezzanine shelf is 50cm.
- The layout of the racks of the lower compartment is carried out depending on the position of the doors, for ease of use.
- The same applies to drawers and baskets.
Material
Here, both decorative and technological aspects of the aspect should be taken into account. The financial side of the issue is also important. What to choose:
- Tree.
Traditional, and now even prestigious material. Its disadvantage is the possibility of warping when humidity changes. Alternatively, it may have a right to exist.
- Drywall.
It's hard to attribute it to furniture materials, but it can still be done. Can only be used in combination with metal frame, in this way you can build . The doors will be made of a different material. It's more likely building construction than furniture.
- Chipboard laminated or cached with decorative film;
- particle board various densities and moisture resistance.
Children's furniture is made from grade E-1 boards.
- MDF (fine fraction) made of wood impregnated with a binder. It has found its greatest application in furniture making.
- Fiberboard ( wood fiber material), the same hardboard.
MDF - boards and laminated chipboard high density- the most suitable material for furniture construction. The most responsible approach should be taken when calculating the width of the sashes.
Expert advice: The calculation is as follows: choose the largest door width. Determine the number of overlaps (1 less than the number of doors). Check the resulting width. If it doesn’t converge, we increase the number of doors. It is possible to change the internal layout.
- You can't make too many of them. It will just be inconvenient.
- You can't make it too wide - it will jam if it moves poorly. The most practical width is no more than 700 mm.
- The overlap of doors must be done within 50-70 millimeters. If there is more, it will be inconvenient to use the internal shelves. If it is less, cracks will appear and you will need to use the sashes with caution.
- The narrowest shelf should be wider than the door, otherwise it will be inaccessible.
The eyes are afraid
Each of its technological transitions demonstrates real results of work. Of course, we check the availability of the required tool:
- - with drills (for confirmation - 4.5 mm);
- screwdriver;
- circular saw with ruler;
- hand saw;
- corner clamp;
- roulette;
- stapler;
- regular and soft hammer;
- hex key for confirmat (furniture screw).
You will also need confirmations D×L = 6.4×50 mm, self-tapping screws, furniture corners for shelves and wooden dowels. Technological points:
- Pre-cut and edged sheets of MDF or chipboard are marked for drilling holes for dowels and confirmats. The quality of assembly and general form products.
- Clamping and drilling of mutually perpendicular parts is carried out using an angle clamp.
- Drilling for confirmation is performed with a special confirmation drill. It is possible to drill with two drills of different diameters followed by countersinking.
- The confirmations are tightened with a little force using a hex wrench.
Take note: It is convenient to assemble and fasten the cabinet to the wall using a U-shaped profile.
- The choice of hangers for sashes is quite large, but the most practical among them are double-rail systems with a bottom support. The best is imported.
- At the same time, one should keep in mind the possibility of using both a two-rail system with an upper support and a monorail version.
Note from experts: With the top support, it is possible for the sashes to fall out, making their adjustment difficult. With a monorail support, the design and installation are complicated. Care is required during operation.
A cleverly designed and well-executed built-in corner cabinet will make the most inaccessible and neglected space attractive and comfortable. Made with your own hands, it will be a source of pride for a long time.
How to do corner wardrobe with your own hands, watch the following video:
In contact with
See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?
Would you like to suggest photos on the topic for publication?
Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!