Until recently, roller shutters were not used for installation in the bathroom or toilet. This happened as a result of the fact that everyone square centimeter area was worth its weight in gold, especially regarding small apartments. Plumbing roller shutters will help hide pipework, household chemicals and other items without disturbing the integrity of the room and design. They look stylish and do not take away from the room usable space. Find out what types of roller shutters there are and how to fit them harmoniously into such small interior more details later in the article.

Roller shutter options

Previously, they could only be installed on wooden window frames. But with the development of technology and the advent of new fastening methods, roller shutters began to be used for installation in sanitary facilities. They will organically fit into any style of room.

Roller shutters have the appearance of a canvas, its surface is decorated with a pattern that can be matched to the overall design of the room, or painted in a single color. Behind them you can hide shelves, pipes or defects or surface irregularities that can spoil the overall picture.

If the roller shutters need to be opened, the canvas is hidden in a special box. Thanks to this, centimeters of an already small room are not wasted.

There are several ways to install roller shutters in a free opening:

• box inside- This is the most convenient design option. The main thing is to take into account the location of all communications so that this does not become an obstacle during installation. Measurements should be taken after the wall is leveled, before tiles are laid on it. This way the roller shutters will be flush with the wall;
• the box remains outside. The method is used when the structure does not fit into the opening. Measurements should be taken after the tiles are laid on the walls. The entire structure will be attached to it;
• overlay method. The box should remain outside the opening. Typically this option is used for very thin walls. For example, if they are made of plasterboard.

Some models of roller shutters have locks. This option will help to reliably hide household chemicals or pipes from small children so that they cannot inadvertently cause harm to themselves.

Advice

When choosing roller shutters, you need to take into account the color of the canvas and frame. It should be in harmony with the environment and the chosen style.

Features to consider during installation

If roller shutters are installed to hide pipes and other communications, be sure to leave free access to them. This is necessary so that in unforeseen situations you can easily check them or turn off the water, for example, if a pipe bursts. Access must be left to make it easier to read meter readings.

Basic requirements to be observed during installation:

• Roller shutters cannot be installed as a blind lintel.
• The door should open and close quickly and effortlessly.
• The box where the roller shutter will be hidden is mounted on top. It can be hidden under a suspended or suspended ceiling, so the whole structure looks light and fits any design.

Roller shutters are more practical than a cabinet with doors or a hatch.

In the first case, when opening, the space will decrease. In the second, there is no free access to the pipes, which will become a significant obstacle to their quick repair.

To match the chosen design

How is the installation going?

Roller shutters are usually installed in the following cases:

• renovation work in room;
• pipe replacement;
• installation of filters, water meters;
• installation of water heating equipment.

Before installing the equipment, it is necessary to determine its functions. The location of installation and the size of the canvas and box for the roller shutters will depend on this. The installation process will not cause any difficulties and will not take much time. You can call a specialist who will quickly cope with the task.

You can install roller shutters in the toilet yourself, this will save the family budget. It is important to correctly mount the box itself and the guides along which the blades will move up and down. It is best to first apply all the necessary markings to the wall; this will facilitate the correct assembly and installation of the structure. As a result, it will turn out smooth and without tilting to the side.

Frame in assembled form together with the canvas it is a rectangle. The niche should have the same shape, which is extremely rare.

Before installation, you need to measure its width at 3 points:

• at the bottom;
• in the middle;
• up.

The discrepancy in values ​​should not exceed 5 ml. Such cracks can be easily covered. To pick up right size roller shutters are taken as a basis smallest value from 3 readings.

Roller shutters cannot interfere with free access to pipes, meters or other plumbing items. This is taken into account when installing them. If repairs are necessary, it will be enough to just lift the canvas and not disassemble the wall.

How to choose roller shutters for the toilet?

Roller shutters will organically fit into any style and design of the room.

You need to pay attention to the details:

• mechanism for raising and lowering the canvas;
• box and canvas material;
• profile type;
• locking device;
• control method. This can happen manually or remotely.

Installing additional options will entail an increase in the cost of the design. It is worth considering where the roller shutters will be installed in a private house or an apartment.

Functions of roller shutters installed in the toilet

Roller shutters help create order in the room. They hide from prying eyes unnecessary items, which advantageously emphasizes the design of the room. The main functions of roller shutters include:

• aesthetics. You can choose slats of any shade. If necessary, a drawing is drawn on the surface. He will emphasize design solution and style. If desired, you can install roller shutters with photo printing in the toilet;
• efficiency. Hidden box, along which the canvas moves, does not take up much space and does not steal precious centimeters. Behind the roller shutters you can hide pipes, meters, water heaters and just shelves with different household chemicals.

Advice

Roller shutters can become the main accent of a room. It will focus all attention on itself, hiding pipe routing or surface defects.

Distinctive features and advantages of roller shutters

The main advantage of roller shutters is open and quick access to pipes and water meters.

This is very important in situations where an accident occurs or pipes begin to leak. There is no need to completely break the wall, you just need to open the roller shutters and repair the broken or failed part.

When the canvas is lowered, it creates reliable protection plumbing equipment, pipe connections and meters from prying eyes. Small children and pets will not be able to get here, which eliminates the risk of injury to them and equipment breakdown.

The advantages of roller shutters include:

• financial savings. For little money you can hide unnecessary details and emphasize the design of the room. Thanks to roller shutters, a bright and stylish accent will appear in the toilet;
• quick installation. Installation of equipment can be performed by an inexperienced person in repair. All work is carried out in 1 day. After this, the roller shutters can be fully used;
• soundproofing the room;
• thermal insulation;

• Creation unique design and the mood of the room. Roller shutters will help emphasize the chosen style and can organically fit into any direction. The main thing is to choose the color or pattern of the canvas;
• convenient to use. When repairing a pipe or meter, there is no need to damage the wall or its finish. The canvas lifts easily, providing access to all the necessary plumbing equipment;
• Roller shutters of any type can be quickly washed. This is done with a simple sponge or damp cloth. If more serious and corrosive contaminants are detected, you can use household chemicals. They will not damage the surface and structure of the canvas and the box.

Advice

If the toilet is designed with a tension or suspended ceiling, then the structure where the canvas will be hidden can be hidden under it. This will give the room a finished look that will look just perfect. To make the interior modern, you can install roller shutters with automatic drive.

Purpose of roller shutters

The toilet room can be divided into 2 zones.

• Visible. This includes cladding, furniture and plumbing.
• Hidden. It contains various pipe connections, communications, and meters.

In order for the hidden area not to be conspicuous, it must be hidden from prying eyes. Roller shutters cope best with this task.

Many people use curtains made of plastic or fabric for these purposes. These materials will quickly deteriorate, which, on the contrary, will be conspicuous and attract unnecessary attention.

If you make a box from chipboard, it will tightly close all communications that should be freely accessible. Even an abandoned hatch will not be able to provide full access to them in the event of a pipe leak or other accident.

When installing regular blinds, you need to be prepared for constant maintenance. This is a rather long and labor-intensive process.

In addition, they will not help protect against the noise that is created in the pipes.

Roller shutters are manufactured in a variety of designs. If necessary, the roller shutters simply rise, providing full access to all pipes, meters and water heaters. They are made from environmentally friendly materials, which guarantees the safety of each family member. The products are easy to clean. During production, the surface of roller shutters is coated with a special powder. This ensures that the appearance is preserved for a long time.

Not only communications, but also various shelves with household chemicals and other items that are best hidden are easily hidden behind the roller shutters. Thanks to this, powders, mops, rags will be hidden and will not spoil appearance rooms.

Design

Roller shutters are based on a design that is used in the production of windows and doors. Roller shutters consist of individual slats. When opened, they are wound onto a special shaft hidden in the box. It can be installed outside or inside the opening. The installation method depends on the chosen design.

To prevent the fabric from unwinding itself, there is a spring inside the shaft. She holds back his roller shutter. When the structure is closed, it consists of thick shutters that reliably hide the inside of the niche. If necessary, roller shutters can be closed with a special lock or latch. This is appropriate to do in apartments where there are small children or curious pets.

Roller shutters are one of the types of blinds, which, in addition to being decorative, also serve as protective function. However, its main purpose in the toilet is to hide sewer pipes. Installation of such blinds by professionals is quite expensive, so to save your family budget, you can install roller shutters in the toilet yourself.

Why do you need roller shutters in the toilet?

The peculiarity of the toilet room is its rather small volume. That is why the problem arises of how to hide many pipes that spoil the appearance. The main task of the ceiling is to provide free access to plumbing communications so that we can get there at any time without difficulty. You can use an option with opening doors, but this will take up additional space.

Sometimes plastic with a specially made hole is used for these purposes to gain access to communications. However, the inconvenience is that when repairing or replacing a pipe, you will need to completely disassemble the entire structure and then reinstall it.

Plumbing roller shutters

That's why manufacturers came up with new option to hide the pipes - roller shutters in the bathroom. They open from top to bottom, so they do not take up space, and neither the toilet nor other plumbing installed in the room will interfere with their opening.

The only part of the roller shutters that takes up space is the container, which houses the entire canvas. However, it is located at the top, so it does not bother anyone. In addition, this container can be hidden under a suspended ceiling.

Types of roller shutters, their advantages and disadvantages

Roller shutters can be easily used on the windows of apartments, garages, doorways kiosks, and so on. IN Everyday life You can see this type of blinds almost everywhere.

Aluminum, wooden, plastic, armored and perforated blinds are available for sale. Most suitable option are plastic roller shutters for the bathroom, as they are light, functional, and have a wide variety of colors and shades. That is, you can easily choose them to suit any interior of the room.

Based on installation methods, roller shutters are divided into:

• Invoices;
• Built-in.

Convenient roller shutters behind the toilet

In addition to this sign, this type blinds are also divided depending on the type of control:

1. Remote – an ordinary remote control is used;
2. Manual;
3. Mixed.

What are such structures? This is an ordinary box that has guides. During opening or closing, the canvas is wound on a shaft, inside of which there is a special spring that controls the weight of the canvas. Sometimes roller shutters are equipped with additional handles or locks for ease of use.

When choosing such structures, consider the place where you plan to install them. If roller shutters are intended for a bathroom in an ordinary apartment, then you do not need to overpay for additional locks. It is enough to choose a high-quality aluminum profile that has a valve. In addition, it is unlikely that at home you will use blinds with a remote control remote control, and this pleasure is not very cheap.

Of course, if you plan to install roller shutters in some public place, then choose steel profile. In addition, for such places it is necessary to have a reliable lock so that strangers cannot do anything.

The installation of blinds depends on the stage of your toilet renovation. If you are still doing all the preparatory work, then it is better to purchase built-in plumbing roller shutters. To do this, mount a metal box under the level, and then hide it with absolutely any material that you like best and that suits the interior of your bathroom. Most often, plastic or tiles are used as such materials.

Otherwise, that is, when you have already completed all the major repairs in the toilet, then use overhead roller shutters. There will be nothing terrible if the box peeks out; it has a fairly attractive appearance and will not be conspicuous.

The main advantages of this design include:

Plumbing roller shutters, like any other device, also have certain disadvantages:

• Plastic is quite electrostatic, so it tends to accumulate dust;
• None are desirable mechanical damage, since the material is quite fragile.

Another one important feature such designs - the possibility of applying absolutely any design to them. In this way you can create original design toilet premises. For convenience and even greater functionality, if possible, you can additionally install various shelves to store all the necessary things.

Methods for installing roller shutters

Installing roller shutters in a toilet is a fairly easy process and does not require any additional skills. There are several installation methods:

1. Installation in the opening with the box inside;
2. Installation in the opening with the box facing outwards;
3. On the overlay, with the box facing out.

Installing a roller shutter in a toilet

The method is selected based on the design features of the opening itself. The first installation method is the most optimal, the main thing is that all communications that we are trying to hide allow deepening. Produce everything first necessary measurements. This must be done after leveling the walls and before laying the tiles.

In the event that the presence of a large number of communications does not allow the application of the installation method described above, then install the roller shutters with the box facing outward into the opening. With this method, all necessary measurements, as well as installation, should be done after the walls have tiles. The disadvantage of this method is that the doorway is slightly reduced.

Overlay installation is used in cases where roller shutters need to be installed on a fairly thin wall, for example on a plasterboard structure.

Installation sequence

You should start installing roller shutters in the toilet with your own hands by installing the box. When you buy blinds, check that the kit includes special tires that will hold them in place. If the walls in your apartment are concrete, then first use a hammer drill to make holes and attach the tires to the wall using anchors. Next, a box should be installed on these tires.

At all stages of installation, use building level to ensure that the structure hangs level. All elements of roller shutters are attached using dowels.

After you have already installed the box and its guides, attach the blade to the shaft. Don't forget to attach stoppers, which are designed to hold the canvas in its extreme positions. Next, connect the elements to control the blinds.

After all stages, be sure to check the functionality of the structure. Lower and raise the roller shutters several times, while making sure that the canvas lies flat without any obstacles. In addition, there should not be any unnecessary noise.

The final step is to put the lid on the box and remove protective film from the design.

In the modern world, roller shutters are the only device that can easily hide all communications and provide free access to them if necessary. In addition, they fit harmoniously into any interior of the room and provide additional sound insulation.

→ Bathroom

Features of installing roller shutters in a bathroom from the Estok company

Roller shutters, which are familiar to us on doors or windows, can now be found in toilets and bathrooms. True, the function of roller shutters in the bathroom is slightly different. Most often, they are designed to hide an opening or niche in which unattractive communications are located. Such roller shutters are very convenient for regularly taking meter readings or changing filter cartridges.

Roller shutters in the bathroom: purpose and advantages

Any bathroom can be divided into visible area , in which it is located cladding, furniture, plumbing, and hidden zone , represented by different connections, communications, valves, counters and the like.

To differentiate them and make the bathroom interior more attractive, different technical solutions are used. Eg, curtain made of plastic or fabric, That is inexpensive option, but at the same time little aesthetic.

Deciding to close communications chipboard box, You will worsen access to the pipes; even if you leave Luke, he may turn out to be away from the leak site.

More aesthetically pleasing and attractive to look at blinds need special care and Doesn't help with noise at all.

In a modern and increasingly popular way hide communications and equipment in the toilet and bathroom is installation of roller shutters . They have a rather attractive appearance, which can even improve the interior of the bathroom. When necessary, the roller shutters quickly rise, allowing full access to the meter or pipe.

The next advantage is excellent sound insulation, that when used in the bathroom plastic pipes will be a valuable factor. In addition, the installation of roller shutters can be done independently, allowing you to save on their installation. Roller shutters are made from hygienic material that can withstand wet cleaning. Thanks to powder coating Roller shutter fabric is durable and long time maintains visual appeal.

Roller shutters help hide shelves, on which cleaning products, household items or tools are stored. With this finish, the appearance of the bathroom will not suffer from the appearance of a mop, rags and boxes of powder. And you will have the opportunity to use the bathroom space more rationally, while simultaneously reducing clutter in your home.

Design of roller shutters for a bathroom

U sanitary roller shutters it is the same as for windows and doors installed in openings roller shutters. When opening, the canvas, which consists of individual lamellas, is wound onto a shaft, which is hidden in the box (it is mounted either outside the opening or on the inside).

Inside this shaft there is spring balancing the structure, preventing spontaneous unwinding of the fabric. When the shutters are closed, they are a dense canvas covering the niche. The closed position of the roller shutter can be fixed latch, but a more reliable option would be regular external lock.

If the opening in the bathroom is less than 52 centimeters wide, a spring mechanism is not used, but installed roller shutters with a cord mechanism.

Recommended installation of roller shutters on full height opening, since it is impossible to guess at which place in the pipe a leak will form. By tightly closing even part of the opening, you will lose the main advantage of this option - opportunities to reach all communications.

How to choose the right one

The selected characteristics of roller shutters affect their functionality and cost.

First of all, you need to measure the opening to accurately determine the metric parameters of the roller shutters. This way you will find out the width and height of the desired product, as well as the dimensions of the box, which are directly related to the length of the roller shutter leaf. Next, you need to select the type of drive that will wind and unwind the web. The best option would be inertia spring, because with certain settings it will allow fix unrolled shutters at the desired height.

Roller shutters with an automatic lifting system are more expensive .

The next nuance in choosing sanitary roller shutters is their installation method. The entire structure can be mounted inside the opening or as an overlay with outside. You also need to decide who will install the roller shutters.

For self-installation Some knowledge and ability to use additional equipment for repairs is required. Installation errors will not only exclude warranty service products, but will also spoil the finish of the bathroom. If in doubt, it is better to entrust the installation of the structure to a company that sells roller shutters.

It is important to decide on the appearance and material of the roller shutters for the bathroom. The most common products are from aluminum profile , covered with factory paint to prevent corrosion.

Often installed in bathrooms plastic roller shutters, since this design is lighter, and its color palette wider. Installed in the bathroom decorative roller shutters You will both support the design of the room and be able to add an interesting color scheme or image.

If roller shutters are chosen for the bathroom not in a private home, but in a public place, resistance to burglary is important . Good choice will steel roller shutters with high quality locking mechanism.

Exterior design

When arranging a bathroom, it is worth choosing not only the most practical solution. If the roller shutters are chosen successfully, the design will also be aesthetic. Roller shutter slats are painted powder coated, able to withstand intensive use, changes in humidity and temperature. Therefore, they are suitable for use both on the streets and in bathrooms.

Since the colors of the roller shutters produced are very diverse, choose suitable shade It is very easy to add shutters to the interior of the bathroom and toilet. A neutral solution would be white roller blinds, but don’t miss the opportunity to add to your bathroom design photo printing or drawing. This way you can turn roller shutters into the central object of your bathroom interior. If your bathroom is tiled in several shades, you can order roller shutters with a design that matches this finish. Manufacturers offer canvases and boxes in different design options, but before purchasing it makes sense to look at them in detail. finished interiors bathroom.

Handles for roller shutters are also very diverse. They may remind regular door handle , present hook, ball, semicircular bracket or something different.

Installation methods and installation features

About installation of sanitary roller shutters It’s best to think about when a toilet and bathroom is being repaired, pipes are being changed, filters, meters and other equipment are being installed.

Installing roller shutters at this time will avoid spending on separate installation, which is necessary if the repair work has already been completed. When installing plumbing fixtures and changing pipes, you will immediately see what needs to be hidden and in what places roller shutters would be appropriate.

How and where to order

Tel . : +7-495-589-8676 , +7-925-514-6896 , +7-925-514-6897 . Email : [email protected] ,

Here you will find:

roller shutter systems

Tips for choosing roller shutters for your home (ON THE BALCONY, WINDOWS AND DOORS) :

when installing roller shutters for a house at the design stage it is used built-in combined installation or installation directly with the window ;

if the openings are already finished and the windows are installed, use overhead installation,

for dachas and country houses preferable anti-vandal roller shutter systems with a high protection class;

choosing inexpensive option controls, you can stop at spring mechanism with latches , and with a large number of roller shutters in the house, it is preferable to have electric roller shutters with remote or group control,

don't forget about the built-in mosquito net - it is provided in many roller shutter systems.

How and where to order

Tel . : +7-495-589-8676 , +7-925-514-6896 , +7-925-514-6897 . Email : [email protected] ,

ready-made roller shutters .

Here you will find:

electric or mechanical roller shutters of different colors, functions and prices: for the balcony, for the gate, windows or doors, etc.,

calculation of approximate cost,

excellent service - our specialists will help you choose the right one roller shutter systems , will take into account all your wishes, measure and calculate the cost,

speed of order fulfillment, pleasing all our customers,

The quality of our roller shutters - mechanical or electrically driven - is excellent and time-tested!

Are roller shutters transparent? ?

Yes, there are four types of transparent roller shutters:

Perforated roller shutters - perforation in the form of slits in the locking (upper) part of the profile

Roll-up grilles - translucent profiles with rectangular windows (open)

Viewing roller shutters - the viewing profile is similar to the grille profile, but has a polyurethane insert; therefore, such roller shutters protect against wind, dust and dirt and at the same time preserve translucency.

Plastic translucent roller shutters - made of translucent PVC, suitable for small and medium-sized roller shutters (small windows and doors).

Roller shutters with regulation luminous flux - roller shutters with sliding slats .
The roller shutter can be in three positions:

Fully open

Stretched position - provides ventilation And adjustable illumination premises

Completely closed - provides protection against burglary

What is a roller shutter light opening? ?

Roller shutter light opening - this is a space limited by guide rails on the sides and a box on top.

Light opening + guide rails + box = Design dimensions

How and where to order

Tel . : +7-495-589-8676 , +7-925-514-6896 , +7-925-514-6897 .
Email : [email protected] ,

You can always order installation from us and buy ready-made roller shutters really inexpensively.

Here you will find:

electric or mechanical roller shutters of different colors, functions and prices - on the balcony, on the gate, windows or doors, etc.,

calculation of approximate cost,

excellent service - our specialists will help you choose the right one roller shutter systems , will take into account all your wishes, measure and calculate the cost,

speed of order fulfillment, pleasing all our customers,

The quality of our roller shutters - mechanical or electrically driven - is excellent and time-tested!

We recommend useful articles about roller shutters:

You can always order installation from us and buy it really inexpensively ready-made roller shutters . Here you will find: electric or mechanical roller shutters of different colors, functions and prices: for the balcony, for the gate, windows or doors, etc., calculation of approximate cost, excellent service - our specialists will help you choose the right one roller shutter systems , will take into account all your wishes, measure and calculate the cost, speed of order fulfillment, pleasing all our customers, The quality of our roller shutters - mechanical or electrically driven - is excellent and time-tested! Roller shutters (English) roll - roll, Russian shutters ) - a type of blinds made in the form of a roll, two guides and plates sliding along them. There are also names roller shutters, roller shutters, roller blinds, roller shutters, security blinds. Roller shutters are installed in window, door and garage openings and are designed to protect the premises from burglary, adverse weather conditions, noise, dust, light and prying eyes. The main characteristic of roller shutters is the emphasis on the protective function of openings. Typically, installation practice involves installing roller shutters on the outside to protect glass from breaking and directly from intruders. Based on materials Wikipedia Services of the company "Estok": Applications for calculations can be sent by email :

To connect plumbing fixtures to the water supply network, a flexible water supply is used. It is in demand when connecting faucets, showers, toilets and other water intake points, and significantly simplifies the installation process. Flexible liner is also used during installation gas equipment. It differs from similar water devices in its manufacturing technology and special safety requirements.

Characteristics and types

Flexible liner for connecting plumbing is a hose different lengths, made of non-toxic synthetic rubber. Thanks to the elasticity and softness of the material, it easily takes the desired position and allows installation in hard to reach places. For guard flexible hose The upper reinforcing layer is designed in the form of a braid, which is made from the following materials:

• Aluminum. Such models can withstand no more than +80 °C and retain functionality for 3 years. At high humidity Aluminum braiding is prone to rust.
• Of stainless steel. Thanks to this reinforcing layer, the service life of the flexible water line is at least 10 years, and the maximum temperature of the transported medium is +95 °C.
• Nylon. This braid is used for the manufacture of reinforced models that can withstand temperatures up to +110 °C and are designed for intensive use for 15 years.

The fasteners used are nut-nut and nut-fitting pairs, which are made of brass or of stainless steel. Devices with different permissible temperatures differ in the color of the braid. Blue ones are used for connecting to a pipeline with cold water, and red ones - with hot ones.

When choosing a water line, you need to pay attention to its elasticity, reliability of fasteners and purpose. It is also mandatory to have a certificate that prevents the rubber from releasing toxic components during operation.

Features of gas connections

When connected gas stoves, speakers and other types of equipment also use flexible hoses. Unlike water models, they are yellow and are not tested for environmental safety. For fixation, end steel or aluminum reinforcement is used. There are the following types of devices for connecting gas appliances:

• PVC hoses reinforced with polyester thread;
• made of synthetic rubber with stainless steel braid;
• bellows, made in the form of a corrugated stainless steel tube.

Santekhkomplekt holding offers engineering equipment, fittings, plumbing and devices for connecting it to communications. The assortment is represented by products and materials from famous foreign and domestic producers. Discounts apply for bulk purchases, and product quality is confirmed by standard certificates. For information support and assistance, each client is assigned a personal manager. The ability to arrange delivery within Moscow and to other regions of the Russian Federation allows you to quickly receive the purchased goods without unnecessary hassle.

Drainage is a drainage and drainage measure to remove excess groundwater.

If water does not leave the site for a long time, the soil becomes gleyed, if shrubs and trees quickly disappear (get wet), you need to urgently take action and drain the site.

Causes of soil waterlogging

There are several reasons for soil waterlogging:

• clay heavy soil structure with poor water permeability;
• aquifer in the form of gray-green and red-brown clays is located close to the surface;
• high groundwater table;
• technogenic factors (construction of roads, pipelines, various objects) that interfere with natural drainage;
• disruption of the water balance by the construction of irrigation systems;
• The landscape area is located in a lowland, ravine, or hollow. In this case, precipitation and the influx of water from higher places play a big role.

What are the consequences of excess moisture in the soil?

You can see the results of this phenomenon yourself - trees and shrubs die. Why is this happening?

• the oxygen content in the soil decreases and the carbon dioxide content increases, which leads to disruption of air exchange processes, water regime and nutritional regime in the soil;
• oxygen starvation of the root-forming layer occurs, which leads to the death of plant roots;
• the supply of macro and microelements by plants (nitrogen, phosphorus, potassium, etc.) is disrupted, because excess water washes out mobile forms of elements from the soil, and they become unavailable for absorption;
• intensive breakdown of proteins occurs and, accordingly, the processes of decay are activated.

Plants can tell you at what level groundwater lies

Take a close look at the flora of your area. The species inhabiting it will tell you at what depth the ground water layers are located:

• perched water - it is best to dig a reservoir in this place;
• at a depth of up to 0.5 m - marigold, horsetails, varieties of sedges grow - bladderwrack, holly, foxweed, Langsdorff's reed;
• at a depth of 0.5 m to 1 m - meadowsweet, canary grass, ;
• from 1 m to 1.5 m – favorable conditions for meadow fescue, bluegrass, mouse peas, rank;
• from 1.5 m - wheatgrass, clover, wormwood, plantain.

What is important to know when planning site drainage

Each group of plants has its own moisture needs:

• at a groundwater depth of 0.5 to 1 m they can grow on raised beds vegetables and annual flowers;
• water depth up to 1.5 m is well tolerated vegetable crops, cereals, annuals and perennials (flowers), ornamental and fruit and berry bushes, trees on a dwarf rootstock;
• if the groundwater is more than 2 m deep, fruit trees can be grown;
• The optimal depth of groundwater for agriculture is from 3.5 m.

Is site drainage necessary?

Record your observations for at least some time. You yourself can understand how much drainage is needed.

Maybe it makes sense to simply redirect melt and sediment water along the bypass channel, rather than allowing it to flow through your site?

Perhaps it is necessary to design and equip a storm drain and improve the composition of the soil and this will be enough?

Or is it worth doing drainage system only for fruit and ornamental trees?

A specialist will give you the exact answer, and we strongly recommend calling him. But after reading this article, you will gain some awareness on this issue.

Upon completion of technological and production tasks related to the arrangement sewer system V apartment building, industrial building, as well as in private households, it is required to test the involved system using the forced flow method. This task is used to identify possible defects or incorrect installation of the entire involved sewer part and a system testing report internal sewerage and drains will be material evidence of the work on acceptance of the object.

A visual inspection should be accompanied by inclusion in the test report of internal sewerage and drainage systems according to SNIP, which is currently represented by the current regulations of the “D” series appendix, which corresponds to SP 73.13330.2012 “Internal sanitary systems of a building”, in Lately the new updated working edition according to SNiP 3.05.01-85 is applicable.

For most people, roller shutters on windows have become a common occurrence, but when they hear about their use in the toilet, they do not know why they are needed there. Even in new buildings, not to mention old houses and apartments, it is rare to have a window in the toilet, which is why people are surprised when they hear about such a concept. In fact, plumbing roller shutters have a different purpose compared to those installed on windows - they are necessary to hide a niche in the wall where various communications are located.

Roller shutters for the toilet - what are they for?

When renovating an apartment or purchasing a new home, people pay attention not only to creating beauty and comfort in living rooms, but also how convenient it will be in the toilet, bathroom, pantry. The peculiarity of the toilet is that this room contains a large number of various communications: sewer and water pipes, water meters, filters. All this is necessary to ensure comfortable living in the house, but if these items are in plain sight, they do not add aesthetics to the room.

To solve the problem of decorating a toilet, modern designers use a solution such as roller shutters. In this case, they have a different purpose than those used on windows - they serve to decorate the niche in which the communications are located. Since these roller shutters should not provide protection against burglary, but serve a decorative role, lightweight materials are used for their manufacture.

Using roller shutters in the toilet, the niche with communications is closed

In addition to the fact that such roller shutters improve aesthetic perception premises, they also allow, if necessary, quick and easy access to communications. It is necessary to periodically monitor the readings of water meters; problems may arise with the pipes and the filter will need to be replaced. All this can be easily done by opening the roller shutters. If earlier they tried to hide communications behind false walls, which had to be broken over time, now they have been replaced by roller shutters.

Design and mechanism of plumbing roller shutters

Despite their different functions, roller shutters for toilets and those installed on windows have the same design. They consist of the following elements:

If the opening width is less than 52 cm, then experts recommend installing roller shutters not with spring, but with cord control.

When the roller shutters are opened, the slats are wound onto a shaft hidden in the box. When closed, they are lowered and secured with a lock.

There are several options for installing roller shutters in the toilet:

1. The box is inserted into the opening. This the best option, which is used during repairs in the toilet. After the roller shutters have been secured, they are laid on the walls ceramic tiles or other finishing material. This solution makes the guides almost invisible.

   Installation with a box inside allows you to hide the entire roller shutter mechanism; it is best to perform it during repairs

2. Box out. This option is used in the case when communications are located not only in a niche, but also near it.

   When communications do not make it possible to hide the box inside, it is taken outside

3. Overlay. In the case when roller shutters are mounted directly on a tiled wall, an overlay installation is carried out. Although it decreases effective area room, but its appearance is improving.

   When installing overlay, the box is attached directly to the wall

Types of roller shutters for the toilet

Roller shutters for the toilet may differ in the following ways:

• material;
• profile used;
• lock type;
• type of mechanism;
• control method;
• dimensions;
• design solution.

It is clear that you should not install powerful steel roller shutters in the toilet. For this case, you need to choose models made of lightweight and durable materials(plastic, aluminum).

Material, profile and lock

The material for roller shutters used in a toilet may be the same as those installed on windows. The only exception is wood, since it is quite expensive and does not tolerate humidity, which is almost always high in the toilet and bathroom.

The optimal materials for roller shutters in the toilet would be:

• plastic. This is the cheapest, but not the worst option. Plastic is not afraid of moisture, does not corrode, weighs little, is available in different colors and quite durable;

  Plastic roller shutters are the most budget option

• aluminum. Roller shutters made of this material will be strong, durable, beautiful and light;

  Aluminum roller shutters will optimal choice for the toilet, because they are light, strong and durable

• steel. Steel roller shutters have high strength and wear resistance, but they are rarely installed in a home toilet, but they will be an excellent solution for a public bathroom.

  Metal roller shutters are rarely installed in the toilet, but it is better if they are made of stainless steel

For plumbing roller shutters, a simple roller profile with foam filler will be sufficient. This solution allows us to provide the necessary sound insulation characteristics. For installation in public toilet you can use a more durable burglary-resistant profile.

The presence of foam filler in the profile increases the sound insulation characteristics of roller shutters

For structures installed in an apartment, a regular bolt will be sufficient, with the help of which the roller shutters are fixed in closed position. For public bathrooms, such devices must be equipped with a full-fledged lock.

In roller shutters for a home toilet, ordinary crossbar bolts are quite sufficient.

Control mechanism

Roller shutters can be controlled:

• manually;
• using an electric motor.

Use electric control for a toilet it is irrational, since the weight of the structure is small and the ability to lift the sash with your hands is quite enough.

In its turn, mechanical type drive can be of two types:

• tape or cord. It is enough to pull the tape attached to the shaft, and the structure is activated. This control allows you to open roller shutters weighing up to 15 kg. In this case, you will have to make some efforts, and in the intermediate position the roller shutters will not be fixed;

  The tape control mechanism does not allow fixing the sash in an intermediate position and requires the application of physical force

• spring-inertial. This is a more convenient option - when opening the roller shutters, they can be fixed at any height. Please note that this type of drive cannot be used if the structure is less than 52 cm wide.

  The spring-inertia mechanism allows you to fix the blade in any position using latches

Color and design

With the help of roller shutters you can not only hide the communications in the toilet, but also decorate this room. When choosing, be sure to take into account the style and color scheme, used in the design of the toilet room.

There is a large selection of roller shutters for the toilet, you can always find exactly what suits your case. There are several options for choosing colors and designs:

• Roller shutters match the color of the walls. If you choose the shades as accurately as possible, this element will be almost invisible;

  If you choose the colors well, only the ribbed surface will give the roller shutters away

• contrast solution. If you want to emphasize the roller shutters, they are made in a contrasting color. You need to choose the right combination and take into account that the toilet is small in size. Experts recommend using a maximum of 2-3 colors when decorating it;

  One of the options for decorating a bathroom could be a game of contrast.

• photo printing. This is the most beautiful, but also the most expensive option. You need to choose an image printed not using film, since it is quickly erased, but using UV printing.

  When decorating a toilet, you can choose roller shutters with photo printing and use contrasting colors

If you don’t like to take risks, then you can use the simplest and safest option - white roller shutters. White color fits into any design solution, but it looks best on walls decorated in light colors.

Dimensions of roller shutters for the toilet

When choosing dimensions, it is necessary to take into account not only the width and height of the device itself, but also the size of the guides.

The guides serve to hold and move the slats and are attached to the side walls. Their standard sizes are 53x22 or 53x60 mm.

The dimensions of the guides are standard and are 53x22 mm or 53x60 mm

When opened, the lamellas are wound around the shaft and hidden in the housing. There are several standard sizes boxes:

• 137x137 mm, it is used when the height of roller shutters does not exceed 160 cm;
• 150x150 mm - structure height no more than 200 cm;
• 165x165 mm - height up to 288 cm;
• 180x180 mm - roller shutter height up to 365 cm.

Now almost all manufacturers provide such a service as making custom roller shutters. To do this you need to do correct measurements and contact the company of your choice. If you are not sure that you can take measurements correctly, manufacturing companies provide this service free of charge and an experienced measurer will do everything for you.

If necessary, you can make not rectangular roller shutters, but triangular or arched ones, but they will cost much more.

Main advantages and disadvantages

If you are still in doubt about whether or not to install roller shutters in the toilet, check out the main advantages of this solution:

• all communications are hidden;
• There remains free access to communications; you can get it in a few seconds. When using false walls, it will take much more time;
• ease of use;
• preserving the free space of the room, as the roller shutters open upward;
• it becomes possible to store various items in a niche;
• easy installation, so you can install the roller shutters yourself;
• good heat and sound insulation characteristics - the noise from the pipes practically does not penetrate into the room;
• reliability and durability;
• easy to maintain, just periodically wipe the roller shutters with a damp sponge;
• access to communications for children, animals, and strangers is limited;
• You can improve the design of the room, as there is a large selection of colors.

It is impossible not to note the disadvantages of roller shutters, although there are few of them and they mainly relate to cheap plastic models:

• high-quality aluminum roller shutters are quite expensive, not everyone can afford to buy them;
• plastic slats can be damaged if used carelessly;
• plastic surfaces are highly electrostatic, so dust accumulates on them and requires cleaning more often;
• in some cases, roller shutters can “cheapen” the appearance of an expensively decorated room, but a large selection of design solutions comes to the rescue.

Assembly and installation of roller shutters for the toilet

If you decide to install roller shutters in the toilet with your own hands, then there is nothing difficult about it. You must have basic plumbing skills, as well as the necessary tools.

To install roller shutters you will need:

The installation process of roller shutters will consist of the following steps:

1. Preparing guides. They are applied to the wall, the places of fastening are marked and holes are made in increments of 40–50 cm using an electric drill.

   Holes are drilled in the guides, the location of which depends on the installation method.

2. Make holes in the box. Two holes are drilled along the edges of the protective cover through which it will be attached to the casing. Holes are drilled on the back wall at the points of attachment to the wall - they are selected according to location.

   Holes are drilled in the box for attaching the lid and for fixing the structure on the wall.

3. Connect the box and the guides, and you need to make sure that there are flanges on the guides. If there are no flanges, you need to cut them yourself.

   Before assembling the roller shutter frame, you need to make sure that there are flanges on the guides

4. The box is attached to the wall. For installation on brick or concrete surfaces Anchors or dowel nails with a diameter of 8 mm are used. Their length is selected so that the size of the working part located in the wall is at least 30 mm.

   After installing the guides, the holes are closed with plugs

5. Place the canvas in the guides and insert it into the box from the back. The blade should pass over the shaft. Then the upper lamella is secured to the shaft and the spring is wound (the number of turns is taken from the instructions), after which it is fixed using a special bracket.

   The canvas is inserted into the box, secured to the shaft and secured with a special bracket

6. Check the movement of the canvas - it should move smoothly, without jerks or distortions. If everything is in order, install the box cover and secure it with rivets.

   The lid is fixed using rivets or self-tapping screws through the holes made when preparing the box

For high-quality installation roller shutters, the wall must be flat to ensure maximum fit between the guides and the frame.

Video: installation of roller shutters in the toilet

Repair of plumbing roller shutters

Roller shutters don't have much complex design, so in the event of a breakdown, you can deal with most problems yourself. To do everything correctly, it is recommended to study the instructions that come with the roller shutters.

The most common breakdowns of roller shutters and how to fix them:

1. Damage to the box. A breakdown will be indicated by the appearance of noise inside the box, which occurs due to friction of the canvas against the body. To eliminate the malfunction, you need to completely lower the blade, then open the box cover, visually determine the cause, and if a certain part fails (usually a shaft bearing), replace it.

   For repairs, you need to remove the box, and then replace the failed elements

2. The slats stopped going up or down. During the drive operation, you can hear that the shaft is moving, but the lamellas remain in place. This is due to the breakdown of the crossbars. It is also necessary to remove the box cover, inspect the crossbars and replace the broken ones with new ones.
3. Skewed canvas. This problem usually occurs when foreign objects get into the guides. It is necessary to inspect them and remove any objects that have fallen there.
4. Scuffs appeared on the side of the canvas, and the slats began to move slowly. This failure is associated with the failure of the plastic plugs located in the side profiles. To eliminate the damage, you need to replace them.

   Plastic plugs deform over time and begin to interfere with the free movement of the canvas

Usually problems in the process correct operation There are no roller shutters in the toilet. When lowering and raising the canvas, you must ensure that work area no foreign objects have entered.

During operation of roller shutters, especially if they are aluminum or iron, it is prohibited:

• place hands or foreign objects in the path of the movement of the canvas;
• operate equipment with electric drive if the cable or other elements of the electrical circuit are damaged;
• make great efforts to open/close the canvas, you must find the reason, otherwise the slats will fail.

Before opening the roller shutters, make sure the lock or latch is in the open position. When cleaning profiles, you need to take into account the material from which they are made and choose the appropriate products.

A soft sponge is usually used to clean roller shutters.

In order to ensure reliable and durable operation of the roller shutters in the toilet, it is recommended to have them inspected and serviced at least once a year. If you follow these simple recommendations, your roller shutters will last for decades.

Return