When all renovation work are carried out independently, then the processes of door cladding are done by hand. Many materials allow you to update the door leaf very cheaply and at the same time with high quality and for a long time. Some of the most popular materials are self-adhesive wallpaper and film. Today I will tell you how to glue doors yourself and what properties and advantages the materials used to create openings have.
Advantages of film and its gluing to surfaces
Representing polymer material, self-adhesive film consists of PVC on back side which the adhesive is applied. It is because of this that the film received its name and became very popular for use on many surfaces. Before you cover your doors with film, you should know all the advantages:
- With some strength and wear resistance, the film can withstand minor mechanical damage and scratches
- With film you can not only decorate the door, but also update it after long term operation
- Easy installation allows you to do all the work yourself
- Convenience of choice – thanks to various textured or color solutions you can choose the materials used for door cladding in any interior design
- It helps hide small defects that doors may have.
- The film is very easy to care for - just wipe it with a damp cloth
- Does not change color when exposed to ultraviolet rays
- It has moisture resistance properties - thanks to this it can be used not only for interior doors, but also for surfaces in the kitchen or bathroom
- Low cost of self-adhesive materials - thanks to this, the film has become universally available
- Does not damage the base
Since at that time I was living in a rented apartment and did not plan to be there long time, there was simply no point in purchasing new doors or kitchen furniture. And here external condition I still wanted to improve it and so I decided to update the surfaces using this self-adhesive film. In order to glue the door leaf with your own hands, you should stock up on the following materials:
- Ruler, meter and pencil - they are used to take the necessary measurements
- Scissors or a stationery knife - allows you to cut the self-adhesive material into the necessary pieces
- Soft spatula – used for smoothing during veneering
- Hairdryer - helps to shape corners and protrusions on the surface
Updating a doorway is very simple and just follow this sequence:
- The door, like any other surface, should be prepared. The basis should not have greasy spots and be dirty. It is also necessary to remove all roughness and burrs. But if you decide to update the varnished canvas, then everything is simple, just smooth out all the unevenness using fine-grained sandpaper
- When the materials are purchased, the surface is prepared, all that remains is to apply the film. The necessary markings are easy to apply to the film thanks to the markings on the reverse side. Subsequently, the materials are glued to wooden and other surfaces and smoothed with a soft spatula.
Important! If bubbles remain after finishing with self-adhesive film, you need to pierce them with a small needle and smooth out the swelling.
Wallpaper in the design of the opening
Wallpaper in the design of the opening
Very often wallpaper is used to decorate a doorway. They can be used to highlight a passage or, conversely, to hide this place and make it less noticeable.
Paper wallpaper is suitable for lining openings, however, although it is resistant to moisture, it still has a short service life. Therefore, it is better to decorate surfaces with such wallpaper for temporary use. Wallpaper tends to fade under sun rays and therefore soon they lose their attractive appearance. But if the pasting is done with acrylic wallpaper, then the service life will increase significantly, and the surface will “breathe”. The design will be similar to vinyl, but unfortunately, less durable.
Important! There are also self-adhesive wallpapers, they can be used for cladding various reasons. However, self-adhesive wallpaper is not so popular due to its low strength.
If you want a quality upgrade wooden surfaces wallpaper, then choose vinyl materials. They are more durable, moisture resistant and have a huge number of tint solutions. You can even choose a picture printed on vinyl trellises and thereby perfectly decorate the partition between rooms.
Varnish for decorating old substrates
Very often in order to update old wooden doors They do not use self-adhesive films, but varnish coating. Wooden canvases lose their attractiveness over time, dry out and require renewal. If you decide to varnish, then carefully prepare the surface and select the mixture.
The use of varnish is labor-intensive process, however, it is capable of turning old wooden panels into a work of art. With the help of such impregnations, even nondescript pine can become like an expensive type of wood. You should not save when buying varnish - only quality material will exceed your expectations. Varnish should be coated with at least 4-5 layers. Before applying each next layer, you need to sand and polish the previous one.
For independent work stock up on the following tools:
- Wood varnish
- Roller and brush for hard-to-reach places
- Rag and spatula along with putty
- Construction hair dryer
- Sandpaper of different grits
Before varnishing, you should prepare the base and remove it from it. old layer paints. After that, all irregularities are sanded and covered with putty. Before applying varnish, surfaces should be treated with various impregnations that will protect them from mold and bark beetles. If you want to reduce the amount of varnish consumed, then prime the base, which will not only improve adhesion, but also reduce the consumption of the mixture.
Results
The use of self-adhesive film is in great demand when updating old surfaces and bases. Thanks to the huge number of advantages, the film can be used even in rooms with high humidity. However, before use, you should be aware of several disadvantages that this material has: if the work was done poorly, then over time the canvas will begin to move away from the base; preliminary preparation is necessary for the film, since the material cannot hide large flaws. The film can only be used once and after its dismantling it becomes unusable. Consider all the little things in advance and only then start decorating with your own hands.
Exist various options doorway finishing. They help to obtain a harmonious and stylish design premises. It must be taken into account that these designs are divided into two types, which depend on the presence or absence door leaf. It is this element that determines the sequence of activities carried out in order to obtain the desired effect.
Methods for lining openings without door panels
There are two main options for finishing a doorway without a door:
- Standard. This technology involves lining openings various materials, without changing the design.
- Arched. This method involves changing the configuration of the opening - significantly or slightly.
Each method requires compliance certain rules, as well as accuracy.
Various types of materials for standard finishing
To design a doorway without a door, finishing products are used that have different technological features.
PVC panels
This option is one of the most popular. This is facilitated by the fact that such products have excellent characteristics and are also very affordable. For installation, the glue-on method is often used. The panels are mainly used to cover slopes. Other parts of the doorway are finished with other materials.
On a note! PVC products require careful selection. To create a coating that will look harmonious in the interior, you should give preference to varieties made as imitation of natural materials.
Everything is done as follows:
Requires leaving the structure for a while to avoid displacement of elements. Now let's start eliminating external joints. If you close them plastic corners, as is done when covering windows, the result may not be a very attractive effect. Therefore, it is better to putty with putty. Then you can begin the subsequent finishing. For this purpose, painting and wallpapering are carried out.
You should know! There are plastic trims that combine well with PVC panels. But pruning them is a very labor-intensive task. The fact is that it is necessary to adjust the elements at an angle of 90 degrees.
The best replacement for PVC would be MDF panels. Finishing openings with this material goes well with other products. If it is necessary to cladding structures using this method in order to eliminate formations visible joints, lamination is used.
Cladding the door slope using MDF Stucco molding
It is immediately worth noting that stucco molding is currently used, which is made from polyurethane. Unlike gypsum options, this type The product is characterized by low weight. Its installation can be performed without the involvement of additional assistants. Important feature What makes this material so special is that it can be processed further. That is, it is easy to paint in different colors.
The finishing of the opening is carried out according to a certain scheme:
- All parts and glue are pre-conditioned in the room where installation will take place for 24 hours. This will ensure that all elements get used to the existing microclimate.
- The areas that will be pasted over are carefully coated with primer. Only compositions that have a deep penetrating effect are selected.
Important! It should be remembered that the stucco sticker is done first. Only after this can you produce general finishing walls
- The surfaces of the products are slightly rubbed with sandpaper. Next, glue is applied. It is evenly distributed along the wrong side of the fragments. Now the stucco molding is applied to the selected area and pressed well. To prevent the elements from slipping, small screws are screwed under them.
- If excess glue appears, it is removed immediately. When this cannot be done immediately, you can use acetone, which is used to moisten a sponge.
- An important point is the joining of elements. It can be carried out at a right angle (perpendicular installation), or trimming can be performed, which is done at an angle of 45 degrees.
- After cladding, joints appear. They are hidden using putty, which, after drying, is rubbed down with sandpaper. Particular care should be taken when finishing between rooms, because it is necessary to provide for the location of parts on both sides.
Decorating a doorway with stucco requires some nuances. This option is most suitable for rooms that have fairly high ceilings. If you use it for small rooms, then it is advisable to carefully consider the location of all elements. The fact is that it is quite easy to overload a room so that the interior becomes simply ruined.
Fake diamond
The use of artificial stone is an excellent solution that helps to decorate a doorway without a door in a very stylish and modern way. This option is superior to similar products due to the fact that the material is produced in a wide decorative range. For example, clinker tiles are also used for cladding such structures, but their choice is quite limited.
On a note! It should be borne in mind that the concept of “artificial” does not detract from the merits of of this product. The imitation is carried out with excellent accuracy. The texture and shades of natural stones are repeated.
Decorating a doorway with artificial stone Before decorating a doorway without a door with decorative stone, you should familiarize yourself with its advantages. The following advantages of the material are highlighted:
- Excellent appearance that brings presentability to the interior.
- Possibility of combination with other finishing materials.
- Excellent resistance to mechanical stress.
- Durability. The service life is calculated in decades.
For work, small-sized products are used that have some relief. If you choose a deeper texture, it will look very bulky.
Cladding is carried out according to various technologies. Often laying is done in a way that allows for uneven edges to be formed.
On a note! Currently, special elements have been developed that act as corner pads. They allow you to avoid unnecessary pruning.
Making the opening is quite simple:
- Marking is carried out in selected areas. It should repeat the developed scheme. To carry out this process most accurately, the stone is laid out on the floor in a given order.
- Wall surfaces are treated with primers that have deep penetration. This will improve adhesion. It is important to let all areas dry thoroughly.
- Fixation can be carried out using special tile adhesive or “liquid nails”. The second option is suitable for cases where the base has almost perfect evenness.
- The composition is applied to the reverse side of the elements. It is important to remove any excess.
- The stone is laid in ways that make it possible to form a seam or make do with a monolithic surface (without joints).
- The parts settle into place and press together. It is important to achieve good grip.
- If joints have been formed, they are rubbed down. The color of the mixture can be contrasting or monochromatic.
If the question arises: what is the best way to decorate a doorway that does not have doors, the first thing you can consider is options that include fake diamond, decorative brick and clinker.
Plaster
IN Lately This type of material has noticeably fallen in popularity. But just recently, about ten years ago, this method seemed to be the most accessible. It's safe to say that many people simply underestimate plaster. Indeed, this option has several significant disadvantages - labor-intensive application (in the absence of experience) and the presence of a certain amount of “dirt”. But if you do all the work correctly, and also achieve a combination with other products, the effect will be pleasantly surprising.
How to decorate a doorway without a door by plastering:
- The required amount of mixture is prepared. The solution made should be in such quantity that it is enough for 30-45 minutes of work.
- The mixture is applied to the surface by casting. Leveling occurs using a rule or a wide spatula.
- If required, beacons and perforated profile guides are installed.
- When the mortar layer exceeds 1-1.5 cm, a reinforcing mesh is laid.
This surface can be painted. But it’s better if the plaster serves as the starting composition. Then the finishing touch can be decorative (textured) putty. It is applied in in a certain order which allows you to get amazing coverage. Such doorways will decorate the interior.
Decorative plaster - spectacular option designing a doorway without a door Arch device
An arch can transform an interior. It is important to understand that a device of this design requires some experience. After all, to decorate a doorway exclusively with your own hands, you will need to spend a lot of effort.
You should know! There are standard-sized arches that are completely ready for installation. They just need to be carefully installed.
Doorway in the form of an arch The easiest way to make arches is made of plasterboard. It looks like this:
- Finishing doorways begins with installing the frame on both sides. It is fixed on the upper horizontal and vertical racks. On the latter, it has a size that is almost equal to the end of the rounding.
- GCR parts are attached to the frame. An arc is pre-cut on them; a stencil is made for this.
- Additional lathing is performed inside the resulting structure. It serves to fasten the last arcuate plasterboard element.
- The final finishing is done with putty. Decorative cladding made from various materials.
The arch can be made using more “noble” products, but will require more skill.
Other design methods
The design of doorways can be done using other methods. They consist of using decorative curtains or screens. This method is very affordable and simple. In addition, it does not require virtually any work.
Various options can be used:
- Fabric curtains. They will be a great addition to any interior. The composition should be composed in such a way that there is harmony with other elements and combination with the window decoration.
- Bamboo curtains. This option is suitable when the room is made in eco style.
- Thread curtains. These products are used if you want to fill the room with unusualness.
Of course, everyone chooses how to design the opening based on their taste and preferences.
Photo gallery: options for finishing doorways without doors (20 photos)
What can be done with an opening equipped with a door
Deciding how to make a doorway that has a door leaf involves using the most simple options. The only difference is where this structure is located.
Simple arrangement of interior space
Most affordable option finishing of interior openings is considered to be the installation of the frame and adjacent elements. General technology is this:
- The box is installed. It can be equipped with a threshold or without it.
- Extensions are used as materials that will line the slopes. They are released standard size(up to 120-150 mm).
- These elements are attached using a groove on the box. If such design feature is not provided, then fixation is carried out using self-tapping screws. The hole for them is drilled through the end of the part.
- External finishing is done using platbands that frame the opening.
This option is great for situations where you need to cladding not very wide structures.
Other options
How to decorate a doorway that has a door in a more original way? In fact, to truly create interesting option, you need to try. The fact is that it is the hanging canvas that limits the use different materials. Misuse finishing products - prevents opening. Although, if you consider this feature, then for exterior finishing Almost everything fits.
On a note! There is a sliding way to open the door. That is, the canvases repeat the design of compartment doors. This is a rather interesting technological solution that requires a more careful selection of facing products.
How to finish a doorway? This question has many answers, which depend on the specific situation. But no matter what anyone advises, you still need to listen to your heart and choose the option that will be closest to you.
Starting a renovation in own apartment, the owners try to use everything possible design techniques to increase the space of small rooms. For this purpose, many refuse to install interior doors, thus combining several rooms together. This solution allows you to expand the boundaries of the room and make it more spacious. But in our article we will look at how to decorate a doorway without a door so that it becomes a real decoration of the interior.
Opening design options
So, if you decide to refresh your interior with an opening, then first we recommend deciding on its future shape. It can remain rectangular, take the shape of an arch, or acquire additional corners. In any case, the design of the interior passage should fit well into the interior of both rooms. That is why you should not immediately go to the store for finishing materials, which in the end will become completely useless.
In order to successfully design a doorway without a door with your own hands, first of all you should sketch a sketch of the future structure. Let's look at the most popular ways to design passages between adjacent rooms.
Openings in the form of a portal
This is the most popular and simplest design that you can do with your own hands. IN in this case input saves rectangular shape, but is complemented by more massive finish with various decorative elements.
Usually, to arrange such an opening it is necessary to remove, dismantle the box and remove everything structural elements former door. The resulting passage is leveled and finished with selected materials. Rectangular openings are suitable for both small and large large premises, while their design style is most often strict and restrained.
Arched passages
Arched doorways most often have a classic shape. In this design option, the arch arch is made in the form of a semicircle, the radius of which is equal to half the width of the passage itself. Oval openings are quite popular and easy to implement. However, before choosing this option, pay attention to the height of the ceilings in your apartment. In rooms where the height of the walls does not exceed two meters, it is strictly not recommended to design a rounded opening, as it will visually lower the ceiling even more.
Here it is better to give preference to an ellipse-shaped arch. This option is optimal for rooms with low ceilings, since the special shape of the vault allows you to visually increase the height of the walls.
Irregularly shaped openings
If simple shapes do not satisfy the needs of the owners, you can experiment and create a more complex option. Since there are no strict rules in modern interior design, the shape of the passage can be the most unusual and even slightly bizarre.
Often in the form of a trapezoid, triangle, semicircle and various asymmetrical configurations, with oblique slopes to one side. A combination of several figures is also possible. For example, when a rectangular portal is complemented by rounded corners of various radii. This design is used only in cases where the width of the doorway is more than 80 cm.
Often in modern design projects you can see unusual openings equipped with spotlights, side shelves or bar counters. This approach not only decorates the room, but also makes the passage between rooms a functional element of the interior.
Designs decorated with colored glass, stained glass or mosaic fragments deserve special attention. It is very difficult to do this kind of design yourself, so in most cases this work is entrusted to professionals. It should be noted that complex and shaped arches can only be installed in cases where the width of the doorway is larger than the standard one. Most often, this design is used in studio apartments. In small and low rooms it is better to give preference to a strict classical style.
Once you have clearly decided what shape your passage will be, you can begin finishing it and choosing decorative elements. Let's start with choosing the material.
Design options
When wondering how to design a doorway without a door, study everything possible options finishes and choose the one that best suits your interior.
Today, the following materials are actively used for these purposes:
Decorative rock;
Polyurethane;
Decorative plaster;
Plastic;
Let’s look at what each material is and how you can use it to design a doorway in more detail.
Tree
The most noble and spectacular decoration is considered to include natural wood. The most valuable wood species can be used here, such as ash, oak, mahogany and hornbeam.
These types are distinguished by their presentability and durability, but are too difficult to process and have a high price tag. That is why pine products are the most popular today. It has an affordable price, is quite durable, has a beautiful structure and, most importantly, can be easily processed with hand tools.
Such arches are sold as finished products, which only need to be installed in the right place.
As an alternative to natural wood, you can use MDF panels. They are lightweight, affordable and come in a wide range of colors.
Plastic panels
Plastic finishing refers to economical options decorating openings. The material is quite easy to work with, as it does not require preliminary preparation of the base and is attached to ordinary liquid nails.
Despite their simplicity, plastic panels look very presentable. They emphasize the severity of the interior and create a contrast in the opening area against the background of the adjacent walls. This design is also convenient because the plastic is resistant to moisture, which means it can be used near the kitchen. Plastic finishing can be done by anyone, since even if any mistakes are made, the damaged element can be easily replaced.
Polyurethane
If you are wondering how to beautifully decorate a doorway without a door, pay attention to polyurethane decor. This is a fairly dense, but at the same time flexible material, which is used to create an imitation of heavy and expensive gypsum stucco. This design looks very attractive, and is much cheaper than tiles and decorative stone.
Polyurethane stucco molding is attached using a special glue to a wide variety of surfaces. The light weight of the material allows it to be used even on plasterboard structures. Initially, decorative elements have White color, but can subsequently be painted in any shade.
Using this material, the doorway can be decorated with round or square columns that widen upward. If the room is small or massive elements simply do not fit into its design, you can decorate the walls with more elegant moldings made of the same material.
Fake diamond
Decorative stone is distinguished by its ability to bring sophistication to the interior and emphasize the high wealth and good taste of the owner. Today on the construction market you can find a lot of varieties of this finishing material, differing in color and texture. Of course, such finishing cannot be called economical, but these costs are justified, because artificial stone in the interior always looks luxurious.
Finishing a doorway with decorative stone will require a lot of effort, but the result is always impressive. In most cases, they cover not only the passage, but also part of the adjacent walls. Both symmetrical and asymmetrical design can be used here. If the doorways are located close to each other, they can be decorated in uniform style. The smoothly transitioning cladding from one opening to another looks impressive.
If you decide to use artificial stone in the interior of your apartment, pay attention to the weight of the material you choose. Some types can greatly burden the doorway, making it impossible to use them on plasterboard structures. In this case, it is better to give preference to gypsum options.
How to do stone finishing yourself?
1. First you need to prepare the walls. If there are large irregularities on the surface of the base, they are eliminated using putty.
2. Next, start mixing the glue. If lightweight options were chosen for lining the opening, they are attached to ordinary liquid nails. Heavier varieties, like clinker tiles, are mounted on a mortar of cement, glue, lime and sand.
3. Cladding the opening begins from the lowest section of the wall. The product is leveled, smeared with glue and pressed tightly against the wall. If you do not want to additionally seal the stone joints in the corner parts of the opening, the material must be overlapped. The brick of the first row is placed close to the opening, and the element of the next row is shifted inward, at a distance equal to the thickness of the finishing material. Thus, alternating rows, they design the opening.
Curtains
If your plans do not include renovating your apartment in the near future, but you really want to add fresh notes to the interior, be smart and hang curtains on the doorway. This move will allow you to simultaneously decorate and, if necessary, hide the passage between rooms.
Fabric curtains look good on openings of absolutely any geometry. The main thing is to pay special attention to the choice of colors and textures so that they fit harmoniously into the interior of the room. Otherwise there are no restrictions. They can be weighty with lambrequins, drapery, or discreet and light.
If the interior of the apartment is decorated in oriental style, products from natural wood with a variety of sticks and beads will be an excellent decoration for the doorway. This option is also attractive because it does not accumulate dust and does not interfere with air circulation between rooms.
When choosing curtains for a doorway, pay attention to thread options. They are presented on the market in the form of fabric cords, which are complemented with various pieces of glass, shells and stones. Textiles can cover the entire passage or be used as its frame.
This design method is attractive because it can be easily done with your own hands, and the affordable cost and variety of options allow you to change the design of the interior opening at least every year.
Decorative plaster
Another simple way to decorate a doorway without a door is to decorate it with decorative plaster. It is suitable for those owners who want to do the work with their own hands, since this process does not cause any particular difficulties even for inexperienced craftsmen. This design is considered quite durable and easy to maintain. The dried surface can be easily painted in the desired color, thanks to which the opening will fit well into any interior.
Before applying the solution, the base is leveled and the caps of the fasteners are masked. Next, the opening is treated with a primer, after which they begin to apply the decorating composition. Using special rollers and stamps, the solution is given the desired relief. After the plaster has dried, it is painted with coloring compounds or covered with finishing solutions.
Conclusion
As you can see, there are many ideas on how to design a doorway without a door. When choosing a suitable style, you can turn to specialists for help, or you can create your own and unique design project. The main thing is that all materials used in the interior are harmoniously combined with each other. Only in this case will you be able to create an original and attractive doorway design style. We hope that the information you read was useful, and the photographs posted in this article helped you with your choice. optimal option design of the passage between rooms.
Doors play a role in the design of premises important role. There are many in stores different models, but quality ones cost big money, but I usually don’t even want to look at cheap ones. There is a good option - to update old doors with your own hands. There are many techniques, and not the most complex ones, that can correct the situation for little money.
Preparation
Whatever method you choose to update an old interior door, you will need to carry out a series of preparatory work. Usually old painted specimens are going to be decorated. Painting is usually amateurish, so there are more than enough unevenness, sagging and other minor defects. They all need to be leveled.
Remove the door leaf from the hinges and lay it on a flat surface. You can - on a trestle or a table. We take wood putty (even if they are from or) and cover all the holes, chips and depressions with it. After drying, move on to next stage- grinding.
Let's take it sandpaper with large grains and small ones. We process to achieve a smooth surface. If you work manually, it takes a lot of time and effort. With a hand sander, work moves faster. If painting is planned next, we try to achieve as smooth a surface as possible. If you plan to decorate with wallpaper, fabric, self-adhesive film, you don’t have to bring it to perfection, but it should still be exactly right.
Next, remove the dust and wash off the residue with water and diluted dishwashing detergent. Dry it. Further actions depend on the selected update method. If you are going to glue fabric or wallpaper of any kind, you can prime the surface (with thinly diluted glue or a special primer). After the primer has dried, you can glue the selected type of decor or apply paint. By the way, if you are going to paint the doors, you need to select the same type of paint that was there before, otherwise you will have to remove everything to a clean base, and this is very difficult.
Renew old doors with wallpaper
The easiest and most affordable way to make old doors attractive is to use wallpaper. They do not necessarily have to be the same color as the walls, although this option is not excluded. First, prepare the canvas as described above, and then you can start finishing.
The procedure for wallpapering doors is as follows:
Photo wallpaper
Modern photo printing allows you to transfer to paper volumetric images. It will turn out very beautiful. Moreover, they can print any image of your choice. In general, any. Photo printing is usually done by advertising agencies, sometimes by printing houses. Contact them, explaining what you need (have a flash drive with the selected design and the exact dimensions of the canvas on which you want to print the image). Having received the required image, we glue it on the door according to the method. described above.
Wallpaper with moldings
If you stick foam or polyurethane moldings and rosettes onto plain wallpaper, the style will completely change. This type of door will suit classic interiors or rooms, using a colorful background and a different form of moldings (with curves) can be decorated in Provence style.
The work is no different from the sequence described above. We take the prepared doors with a leveled surface, spread them with glue, and glue the wallpaper.
By leveling the panels with a rubber roller it is not difficult to achieve good results, but a certain number of small air bubbles remain. To remove them, take a special plastic spatula (any hardware store has them), and use it to finally remove the air from the center to the edges. Also, use this spatula to smooth the wallpaper joint, if there is one. It is quite possible to achieve that the joint will not be visible.
Trim the edges of the wallpaper with a wallpaper knife. This must be done before the wallpaper is softened by the glue, otherwise later it may “stretch” behind the blade and tear. Leave to dry. After 12 hours or a day - depending on the temperature and humidity in the room - you can continue decorating the old door.
Carefully, with a simple pencil apply markings. When everything is drawn, use a tape measure to measure the required length of the pieces of molding. We cut it off and file the edges at an angle of 45°. We take a suitable glue (PVA is possible) and carefully smear the back surface of the cut elements, glue them according to the markings, and leave them to dry.
Using the same principle, you can update old doors so that the style will be different. Several examples in the photo gallery.
Beautiful wallpaper with a matching pattern is the secret to the attractiveness of this door decor 
Moldings were glued to the painted doors, which were then painted with “gold” paint
Designer decoration of old doors
If you are interested in designer items, you can try turning it into an art object. The good news is that you don’t need to prepare it: the unevenness and sagging will be hidden under the design.
The decorating process begins with the making of papier-mâché. Take egg trays, sprinkle them with water, knead them with your fist, trying to level the surface. They will tear during the process, this is normal and even good - we need small pieces. These almost flat fragments, on liquid nails or using glue gun, glue to the surface in any order.
The items used are lids, rings, a small perfume bottle, a small non-working computer mouse, the remains of a mosaic, whatever comes to hand. You will need a lot of trash, you can collect it ahead of time.
When most of the surface is “decorated”, take acrylic silver paint in cans (you need 2 pieces) and paint the decor well. When choosing paint, it is better to take an expensive one, in particular German, so that it does not crumble later.
Decorating doors using decoupage technique
Romantic or “cheerful” door designs can be made using decoupage. To work you will need:
- napkins with a suitable pattern;
- PVA glue (about 200 ml);
- natural bristle brush;
- acrylic lacquer.
We prepare the canvas as described earlier. We prime and paint in suitable color. After the paint has dried, we begin decorating. Take a pack of napkins you like and separate upper layer, which is with a picture.
We tear napkins with a pattern lengthwise into three strips. We tear it, not cut it. We want a slightly uneven edge. Two strips on one side have a smooth edge; we put them to one side. We tear the middle part into squares. The best option, if they are 3-4 cm on a side.
Take glue, a brush, and a small container. In it we mix PVA with water in equal proportions.
Next, we start decorating the door with our own hands. We take a strip with a smooth edge and apply it to the area to be decorated (in this case, it is the center of the door leaf). Dip the brush into glue and use it to start different directions smooth out the fragment. Wrinkles will form, but this is just a good thing - the finish will be more textured, so there is no particular need to even them out. When wet, napkins are very delicate and elastic, remember this when working and act carefully.
Gradually we make a frame with one smooth edge. The second one comes out carelessly torn.
Filling the middle of the “frame”
When the entire surface is filled, leave it for a day - wait until the PVA dries. Next, take acrylic varnish and cover our decor with a soft brush. To prevent it from smelling, we use varnish on water based. It's a little more expensive, but it doesn't give you a headache.
The beauty of decoupage is that we get beautiful things at minimal cost.
Decorating a door with self-adhesive film
Perhaps the easiest way is to update old doors using self-adhesive. All you need:
- the film itself,
- a spray bottle containing soap and water;
- plastic spatula or soft cloth;
- sharp knife (can be wallpaper).
This film is available in different versions - there is a plain matte or glossy one, there is a plain one with holographic patterns, a wood effect, there are even special ones for covering doors with photo printing applied.
Regardless of the type of film, it is glued in the same way. In this case, we decided to update the old doors using a photo printing option. One point: before gluing, remove handles, latches and other door fittings.
For the decor to be of high quality, the surface of the door must be clean, even and smooth. If you processed it with a sander before, try gluing a small piece of film. If it sticks well, everything is fine. If it “doesn’t stick,” you’ll have to prime the doors and then paint or varnish them to create a smooth surface.
Take a spray bottle and evenly wet the surface of the door.
We shave the film, remove the protective layer from one of the corners, and also spray it. So, by wetting, we separate the protective paper from the top along the entire width of the film.
You should get a strip 15-20 cm wide. Do not remove any more so that the film does not stick to the canvas. We apply the peeled part to the upper edge of the door leaf (or the area to be decorated), it quickly sticks. Try to apply it evenly right away, but the position can be corrected - that’s why we wet the surface so that the film could be moved. If you pull it, it moves little by little.
After making sure that the canvas lies flat, take a plastic spatula (for wallpaper) and smooth the surface with it, moving from the center to the edges. The goal is to remove all the air. Since the surface is wet, this is not difficult - the water displaces the air.
Everything else is simple. We pull down the protective paper, peel off the strip, glue it and so on - to the very bottom of the door. If you glued the top part for a long time, the bottom part may dry out, so periodically check whether the doors are dry and spray again if necessary.
After all the film has been glued, sharp knife cut off excess around the edges. All that remains after this is to install the fittings.
Door decor with stencils
Old doors can be updated using printed drawings. It’s just a pity that not everyone has artistic talent. But in this case, the problem is solved with the help of stencils. You can draw them yourself, or you can find an image you like, print it on thick paper, cut out the design with a sharp knife, leaving jumpers in places. Now the stencil is ready.
The disadvantage of a paper stencil is that it doesn’t last long. If you need a “long-lasting” one, you need to transfer it to a transparent thick film. The technology for cutting out stencils for door decoration is shown in more detail in the video.
The drawing can be anything. Both geometric and floral, stylized images of animals, birds, and cartoon characters are popular.
Sections of the article:
Before you start finishing the doorway, you need to take into account the design, style and color scheme of the future door and hallway. If you have not yet decided how and with what material you are going to decorate the doorway, then pay attention to the design itself front door.
Elements around the door, in addition to decorative function, can also become effective thermal insulation, and the plane of the slopes will close the joints between the wall and the door frame.
Slope finishing technology
Construction or renovation causes a lot of trouble for many people, requiring a lot of effort and time. The process of installing and finishing a door opening is in many ways similar to finishing window slopes. Not only the canvas must be put in order, but also its framing.
If you decide to do the finishing work yourself, you need to first become familiar with the technology for finishing door slopes.
Some rules for carrying out work
Install the door frame first. Then seal any gaps between the wall and the plaster, removing the old coating and any loose pieces of plaster.
Plastering slopes should begin on a previously primed surface. Don't forget about additional precautions against fungus. To do this, treat the surface with a strong primer or add it directly to the solution. As soon as the opening is smooth and the solution has dried, you can begin painting or lining with decorative material.
However, before this it is necessary to check the evenness of the slope angles using a level. If a deviation from the norm is noticed, alignment is necessary. All excess mortar must be removed with a spatula; the surface of the slopes must be even and smooth. The upper part must be strictly horizontal and parallel to the floor. The sides are also parallel to each other. The depth along the entire parameter of the doorway should not narrow.
Finishing the opening will improve the sound and thermal insulation premises. To complete the design of the opening, use a platband, which should match the door in color and texture and be securely fastened.
A high-quality finish for the appearance of a doorway is very important. It makes the front door attractive and improves its appearance. entrance group. The color of the front door should be combined with the finishing material and fit harmoniously into the interior of the hallway.
You can finish the openings without plastering. First, protruding parts that interfere with the installation of a frame made of a metal profile or wooden beam. Then a frame is mounted to attach the finishing parts ( ready-made options made of wood or plastic). You can immediately install light switches, lighting, and communications for cable television or wired Internet.
Door opening finishing materials
The simplest way to decorate a doorway is to paint it. You just need to choose a shade of paint that matches the color of the door.
The best option is to finish door slopes with plaster. Using the solution it is possible to obtain an almost perfectly flat surface. This design of the opening makes it possible to obtain a high-quality and durable finish. In the future, simple repairs will eliminate any shortcomings that appeared during the operation of the doors.
Advantage of this type finishing as follows:
- No voids or so-called “cold bridges” will form under the plaster;
- The slope will not bend. The surface of the opening will perfectly withstand humidity and sudden temperature changes.
If there are thick walls, the slopes are quite wide. In this case, it is better to use drywall. By installing it in the opening, you will make its walls warmer. Drywall covers the joint between the wall and the door frame well. The surface will be clean, smooth and aesthetically attractive. In addition, working with this material is simple and convenient. When finishing slopes, you can use finishing putty as an adhesive for drywall. But it is best to attach it with special glue.
Slopes with wood trim look great. It never goes out of fashion and always matches any interior. Instead of wood, you can install laminated lining. Its texture is similar to real wood. However, it is not recommended to finish the door slopes on the outside side facing the street, since it will not last long if exposed to the external environment.
Ready-made PVC and MDF panels are also used to finish the opening. They will give the slopes an aesthetic and respectable appearance. They must be installed with outside premises. This material hygienic and durable, harmless to human health as it does not contain toxic substances in its structure.
Wood-like plastic. To imitate a wooden structure, plastic panels are suitable. They are a very popular solution for finishing work. To give contrast to a wall covered with light-colored wallpaper or painted paint light shades dark panels are suitable. This solution will emphasize the sophistication and rigor of the interior. As a result, the hallway space will seem wider than it actually is. Caring for such panels is simple and unpretentious; they are easy to clean using conventional products.
By purchasing finishing material in stores, be sure to pay attention to the manufacturer. Factories with a good reputation guarantee excellent quality of goods and will certainly offer the best finishing materials.
Door openings with trim look beautiful plastic panels. They are best suited in cases where the door opening has a non-standard shape. The material can be used in combination with any hallway interior; you just need to choose a color similar to the front door. The panels are installed quickly, and an inexperienced person in construction matters can handle their installation. The finishing material is cut exactly to the size of the opening. Seams and joints will not be visible on the plane. The final appearance of the opening looks neat and aesthetically pleasing.
Using laminate, the finishing of door openings can be given any shape. This material is environmentally friendly and very durable. However, it does not like moisture. Therefore, it is better to install it only from the inside.
Finishing the door opening in accordance with the interior
Initially, when planning to decorate a house or apartment, you need to choose the most optimal design solution. This is not always easy to do. However, today there are many on sale available materials. If you have any doubts, you can use the designer's recommendation.
The choice of method for finishing the doorway deserves special attention. Therefore, upgrading the entrance to the house is a responsible task. The decoration of the doorway largely depends on what material will be used to decorate it and how suitable this combination is for the entrance door.
Keep in mind that the design of the front door is constantly in motion. In addition, it is susceptible to external factors. These include: wind, frost, dirt, shock and sunlight (especially if the door is installed at the entrance to a private house). Taking this into account, for the door opening you need to select not only high-quality finishing material, but also pay attention to the choice of good fittings.
To prevent noise from entering and leaving the room through the door, sound insulating material should be installed. The fastenings of the door and opening must be strong, providing good protection against illegal entry into the home.
Remember that even the most luxurious front door, after it is finished construction works, will not look presentable if the opening around it remains unfinished.
Doorway shape
It is also important to choose the appropriate shape for the doorway.
A rectangular opening looks beautiful when a wide trim is used to finish it. It is this that significantly influences the overall perception of the hallway interior. Such an opening may require additional decor, adding gloss and attractiveness to the entire structure of the front door.
When choosing an arch to decorate a doorway, you should take into account the overall style of the interior of the house. Today this is one of the most popular options for designing a doorway. However, everything should be done in the same style as other rooms in the house. Try to exclude the presence of massive and bright decorative elements, they make the opening heavier. It is not necessary to make the arch round. You can make it ellipsoidal, asymmetrical or trapezoidal.
Do you want the door slopes to be finished in the form of an arch? There are quite a few ready-made solutions for doors. The appearance can vary depending on the owner’s requirements; it can be airy or openwork. In this case, the doorway will fit into virtually any hallway interior.
Use of decorative stone
Recently, decorative stone has become quite often used for finishing works. It is considered a stylish decorative element and is in demand in the design of door openings. With this design of the front door opening it will be possible to significantly improve the decoration of the hallway.
Conclusion
In conclusion, I would like to note that there are many options for designing the front door opening. The main thing is to do between them right choice, which often causes difficulties.
Even a non-professional can cope with decorating slopes. It is only important to know the features technological process When performing work and the possibility of the material chosen for finishing, take into account its operational properties. Not only the decoration of the doorway, but also the appearance of the room in which the door is installed depends on this.
It is the door itself and the openings that catch the eye of the person entering the house. Therefore, even the smallest flaws will be noticeable. The entire look of the room can be ruined if you just make a small mistake in choosing the color of the finish, not to mention poor quality installation work.